Remove the --check-addtext and --build flags. They were used for
checkAddTextCalls, which was removed in e2735ecfdd.
Add the sources in ui/qt except for qcustomplot.{cpp,h}. Fix issues in
main.cpp, rtp_audio_stream.cpp, and wireshark_zip_helper.cpp.
Rename "index"es in packet-usb-hid.c.
There are some deltas between the UN*X epoch and other epochs that are
used in a number of places; put them into a header.
Change-Id: Ia2d9d69b9d91352d730d97d9e4897518635b4861
Reviewed-on: https://code.wireshark.org/review/35895
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit f1285fcf06.
NSIS package is broken with this commit.
Change-Id: Ief22a308edad188fa2d5fab79355f19493359fa6
Reviewed-on: https://code.wireshark.org/review/34758
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
HTML docs are installed to both $docdir and $pkgdatadir. Fix that
to install to $docdir only.
Change-Id: I115158585b6df9170d9a01249adbc8548df91f14
Reviewed-on: https://code.wireshark.org/review/34640
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's broken, unmaintained, poorly implemented and obsoleted by saner
debug-info methods.
Note: To do the compliance check properly would require much more
extensive work to clearly define public and private interfaces (without
manual bookeeping of files or symbols either, of course, because who
would want that...).
Change-Id: Ib801f3c152ca2369f95ca1f4af4d37cd8cc7c47a
Reviewed-on: https://code.wireshark.org/review/33928
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Change-Id: Ic5a3653cb8bcc33e0be108c8b201567e7090f9f5
Reviewed-on: https://code.wireshark.org/review/33043
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Change-Id: I5326b87784817fb353329e2d686fe0515c32f6cb
Reviewed-on: https://code.wireshark.org/review/33038
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Those routines exist on both Windows and UN*X, but they don't do
anything on UN*X (they could if it were ever necessary).
That eliminates some #ifdefs, and also means that the gory details of
initializing Winsock, including the Winsock version being requested,
are buried in one routine.
The initialization routine returns NULL on success and a pointer to a
g_malloc()ated error message on failure; report the error to the user,
along with a "report this to the Wireshark developers" suggestion.
That means including wsutil/socket.h, which obviates the need to include
some headers for socket APIs, as it includes them for you.
Change-Id: I9327bbf25effbb441e4217edc5354a4d5ab07186
Reviewed-on: https://code.wireshark.org/review/33045
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make sure we link each application that calls WSAStartup with ws2_32.lib.
Pass version 2.2 to WSAStartup. Wikipedia says it was introduced in 1996,
so we should be OK.
Ping-Bug: 15711
Change-Id: I431839e930e7c646669af7373789640b5180ec28
Reviewed-on: https://code.wireshark.org/review/33033
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Tomasz Moń <desowin@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
(Routines, so that if we internationalize strings not in the Qt code,
this can return the appropriately translated version.)
Change-Id: I1c169d79acde2f0545af7af2a737883d58f52509
Reviewed-on: https://code.wireshark.org/review/32549
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
User guides are installed to doc/Wireshark. Use doc/wireshark instead.
Remove leftover variable CPACK_PACKAGE_NAME.
Change-Id: I9a1d6bdc7d8f0b48c61e43679285d5ba83904a63
Reviewed-on: https://code.wireshark.org/review/31851
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Instead of using "$ORIGIN/../lib" just use "$ORIGIN".
Also be explicit in configuring the relative RPATH. We don't want
to assume a default relative path, in case more targets are addded,
out of caution.
Change-Id: I3b7f5e8de7be8bb30aca3b433212113d876c4163
Reviewed-on: https://code.wireshark.org/review/31647
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This is more explicit and easier to read with slightly better locality
while using less code.
Also less awkward when the package doesn't fit the narrow package list
expectations.
The ws_find_package() macro doesn't include all the status messages. The
choice was to rely on standard find_package() and feature_summary() output
and be less verbose.
Avoid polluting the CLI build interface. Per target include paths and
macro definitions are preferred.
Because this patch intentionally removes the global CMAKE_*_FLAGS
and include_directories() usage in favor of target properties, some
untested build configurations may inadvertently break because of
missing ${PACKAGE}_INCLUDE_DIRS or ${PACKAGE}_DEFINITIONS. This
required a manual review of dependencies that might have been
incomplete.
${PACKAGE_VAR}_LINK_FLAGS seems to be unused.
Changing the CMake Qt code to use more modern CMake component syntax
is left as future work.
Change-Id: I3ed75252189a6e05a23ed6e619088f519cd7ed78
Reviewed-on: https://code.wireshark.org/review/31496
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
cmdarg_err() is for reporting errors for command-line programs and
command-line errors in GUI programs; it's not something for any of the
Wireshark libraries to use.
The various routines for parsing numerical command-line arguments are
not for general use, they're just for use when parsing arguments.
Change-Id: I100bd4a55ab8ee4497f41d9651b0c5670e6c1e7f
Reviewed-on: https://code.wireshark.org/review/31281
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Print warnings to help with debugging. Add Jakub (author of
json_puts_string).
Change-Id: I8bf039afc21357e97accb2a9abf9378735af12eb
Reviewed-on: https://code.wireshark.org/review/31041
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Setting LIBRARY_OUTPUT_DIRECTORY to Wireshark.app/Contents/Frameworks
for each of our libraries ends up installing a fully versioned .dylib
along with soversion and unversioned symlinks, which is more than we
want and which wastes disk space when osx-app.sh dsymifies our
libraries.
Leave LIBRARY_OUTPUT_DIRECTORY unset and depend on osx-app.sh to copy
our libraries into place.
Bug: 15361
Change-Id: If0fbaa796b4be806e2aa13887e511a330fe55df5
Reviewed-on: https://code.wireshark.org/review/31139
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Rename DATAFILE_DIR to be closer to CMake and avoid mixing
with the staging dir path variable of the same name.
Change-Id: I7b1e02152d8bde14cca210fbfae4acbdba7d78d7
Reviewed-on: https://code.wireshark.org/review/30916
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
libwireshark and libwiretap have their INTERFACE link dependencies
changed to the required set.
libwsutil keeps a default public visibility. Further work may
show some unneeded link requirements.
The executable dependencies are adjusted accordingly.
Change-Id: I3a534f72403819cac136ae47a3d80acee76e0fb3
Reviewed-on: https://code.wireshark.org/review/30815
Reviewed-by: João Valverde <j@v6e.pt>
While at it prefer to use add_definitions() instead of config.h. This
puts all definitions in the same place and limits the scope to the
respective wsutil API.
Change-Id: Idc30914220b876865e0ae47709e6f17eb9b0fc2c
Reviewed-on: https://code.wireshark.org/review/30782
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Install headers to support plugins development on Windows.
Change-Id: I3161bd2f730edf62ab44fee6ce4fedbb9aee0d31
Reviewed-on: https://code.wireshark.org/review/30776
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
JSON-GLib was added in v2.9.0rc0-201-g511c2e166a, but is no longer
necessary since we have a home-grown JSON dumper (wsutil/json_dumper.h).
Remove the remaining traces and additionally remove GObject from
FindGLIB2.cmake since it was only added for JSON-GLib.
Change-Id: If9dfd2c60cec130f98109d100bdb6618bde06ba0
Reviewed-on: https://code.wireshark.org/review/30733
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The (optional) JSON-GLib library adds dependencies on GObject, GIO. For
statically linked oss-fuzz builds it also adds libffi and more. To avoid
these dependencies, replace JSON-GLib by some custom code. This allows
`tshark -G elastic-mapping` to be enabled by default without extra deps.
API design goals of the new JSON dumper library:
- Small interface without a lot of abstraction.
- Avoid memory allocations if possible (currently none, but maybe
json_puts_string will be replaced to improve UTF-8 support).
- Do not implement parsing, this is currently handled by jsmn.
Methods to open/close array/objects and to set members are inspired by
the JsonGlib interface. The interfaces to write values is inspired by
the sharkd code (json_puts_string is also borrowed from that).
The only observed differences in the tshark output:
- JSON-GLib ignores duplicates, json_dumper does not and may produce
duplicates and currently print two "ip.opt.sec_prot_auth_unassigned".
- JSON-GLib adds a space before a colon (unimportant formatting detail).
- (Not observed, but UTF-8 strings will be wrong like bug 14948.)
A test was added to catch changes in the tshark output. I also fuzzed
json_dumper with libFuzzer + UBSAN/ASAN and fixed an off-by-one error.
Change-Id: I0c85b18777b04d1e0f613a3d59935ec59be87ff4
Link: https://www.wireshark.org/lists/wireshark-dev/201811/msg00052.html
Reviewed-on: https://code.wireshark.org/review/30732
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
With autotools, it was possible that the binary was located in a .libs
directory, but with CMake the executables directory and data directory
are the same (except macOS with app bundles). Use this property to get
rid of the hard-coded build directory. Helps with reproducible builds.
Bug: 15163
Change-Id: I5b8807a03783a9919fba7b0cc83f5c162caa8052
Reviewed-on: https://code.wireshark.org/review/29984
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the ability to specify maximum function counts for each group to
checkAPIs. Add maximum counts for the "termoutput" and "abort" groups
where needed. Show summaries in various checkAPI targets.
Switch uses of ws_g_warning back to plain g_warning.
Change-Id: I5cbddc8c671729e424eed8551f69116d16491976
Reviewed-on: https://code.wireshark.org/review/29721
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Replace ws_base64_decode_inplace() with g_base64_decode_inplace()
or g_base64_decode(), which was introduced in glib 2.12.
The only observed difference is a need for zero-terminate the buffer
after decoding.
Change-Id: Ia102d0d8e9bec575ffeddf448191a3f6de9fb1ed
Reviewed-on: https://code.wireshark.org/review/29382
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
A CMake config-file package provides support for downstreams using
CMake and Wireshark libraries to easily configure the libwireshark
dependency with:
find_package(Wireshark CONFIG [REQUIRED])
target_link_libraries(foo epan)
The FindWireshark.cmake file is no longer needed.
See cmake-package(7) for more details on CMake's package system.
Change-Id: Ie8af1d44417a99dd08d37959f7b2ffca88572ec2
Reviewed-on: https://code.wireshark.org/review/29208
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
The WireGuard dissector will need X25519 to enable decryption, add a
Gcrypt implementation that implements the NaCl/Sodium interface.
While inspired by the MPI example in t-cv25519.c, note subtle but
important correctness/interoperability fixes: add a check for infinity
(gcry_mpi_ec_get_affine) and handle short values from gcry_mpi_print.
The last issue is ugly, perhaps the high level API (gcry_pk_decrypt)
should be used instead (which < 2% slower than this MPI implementation).
(Both issues were found through fuzzing.)
As for alternative options, Sodium is superior but would be a new
dependency. For some older performance and usability notes (comparing
crypto_scalarmult_curve25519_base (note "_base") against others), see
https://lists.gnupg.org/pipermail/gcrypt-devel/2018-July/004532.html
Performance comparison on Ubuntu 18.04 (i7-3770) between Sodium 1.0.16
against Gcrypt 1.8.3 and Gcrypt 86e5e06a (git master, future 1.9.x) by
computing 65536 times X25519(1, 8) via crypto_scalarmult_curve25519:
Sodium (sandy2x): 1.4x faster than ref10
Sodium (ref10): 1 (baseline)
Gcrypt (git): 5x slower than ref10, 7x slower than sandy2x
Gcrypt (1.8.3): 17x ref10, 24x sandy2x (took 65 seconds)
Change-Id: Ia54e73cc3cc469a6697554729aff4edd19f55630
Ping-Bug: 15011
Reviewed-on: https://code.wireshark.org/review/28987
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Multi-configuration generators (such as Xcode or VS) append the current build configuration to most paths (eg. Debug/Release). Currently this results in inconsistent paths for the application bundle and the included command line tools. This commit sets the correct path information for multi-configuration generators for macOS application bundles. The standard Makefile behaviour is untouched.
One Windows specific configuration was changed, as it was conflicting with these changes. This needs to be checked before merging.
Additionally the wrapper scripts are omitted for Xcode, as the path to the binaries depends on the configuration chosen in Xcode. Therefore it is not viable to create these scripts in the cmake run.
Bug: 11816
Change-Id: Ib43d82eb04600a0e2f2b020afb44b579ffc7a7c9
Reviewed-on: https://code.wireshark.org/review/28291
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
gd2e0724afc moved our library versions into their own variables named
FULL_SO_VERSION. They're no longer used and interfere with
tools/release-update-debian-soversions.sh so remove them.
Fix some shellcheck warnings in release-update-debian-soversions.sh
while we're here.
Bug: 14778
Change-Id: I0eb0bb4ab4c482bdb8a94f8c18aa04c6c83c781b
Reviewed-on: https://code.wireshark.org/review/28068
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
caputils/ws80211_utils.c contains a re-definition of the linux kernel's
nla_for_each_nested() macro that applies the correct casts to allow
compilation with a C++ compiler.
Make this definition public by moving it into a new wsutil/netlink.h
file. Include the kernel's original definition before we overwrite it. This
way, it's not necessary for a .c file to include wsutil/netlink.h after
the system includes.
Use our nla_for_each_nested() version in extcap/dpauxmon.c to squelch the
following compiler warning:
[1664/2251] Building C object
extcap/CMakeFiles/dpauxmon.dir/dpauxmon.c.o
../extcap/dpauxmon.c: In function ‘family_handler’:
../extcap/dpauxmon.c:168:13: warning: request for implicit conversion
from ‘void *’ to ‘struct nlattr *’ not permitted in C++ [-Wc++-compat]
nla_for_each_nested(mcgrp, tb[CTRL_ATTR_MCAST_GROUPS], rem_mcgrp) {
Change-Id: I6ba40ef6343c5d168c1b0c4554f13202911ded76
Reviewed-on: https://code.wireshark.org/review/27688
Reviewed-by: Anders Broman <a.broman58@gmail.com>
From compilation log:
epan/ipv4.h:19:10: fatal error: 'wsutil/inet_ipv4.h' file not found
tools/oss-fuzzshark/fuzzshark.c:27:10: fatal error: 'version_info.h' file not found
Change-Id: I3e147e014ae398ae07e64aec5a6535a8f9e357a3
Reviewed-on: https://code.wireshark.org/review/27076
Petri-Dish: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This puts more distance between the caller and the underlying
library. At the moment we're using libjsmn, but other libraries
(like json-glib) could be used.
Change-Id: I1431424a998fc8188ad47b71d6d95afdc92a3f9e
Reviewed-on: https://code.wireshark.org/review/27055
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove our popcount implementation in favor of ws_count_ones, which
is our other popcount implementation. This required updating and
running process-x11-xcb.pl.
Change-Id: I8634c55242113b338c5b0173837c35f98b148b4f
Reviewed-on: https://code.wireshark.org/review/26454
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Our 802.11 decryption code isn't tied to any specific product. Change
the file and API names to dot11decrypt.
Change-Id: I14fd951be3ae9b656a4e1959067fc0bdcc681ee2
Reviewed-on: https://code.wireshark.org/review/26058
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Except for the one directory that (currently) has "not yet clean" files,
epan/dissectors, we don't need a separate variable to keep track of the
"clean" source files.
In the cases where not all files were in CLEAN_FILES, put them into the
variable used to enable -Werror or its equivalent.
Change-Id: Ic4119861c1d9e381adfe31e9977e1ac71d623f5b
Reviewed-on: https://code.wireshark.org/review/25830
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
João Valverde