pointer to a "struct dissector_table", containing a pointer to a hash
table and a pointer to a list of handles. Fix
"dissector_all_tables_foreach_func()" to understand that.
svn path=/trunk/; revision=4312
dissector table contain both a hash table, to use to look up port
numbers to find a dissector, and a list of all dissectors that *could*
be assigned to ports in that hash table, to be used by user interface
code.
Make the "Decode As" dialog box code use that.
Also make it *not* let you choose whether to set the dissector for both
the UDP and TCP versions of a port; some protocols run only atop TCP,
some run only atop UDP, and even those that can run atop both may have
different dissector handles to use over TCP and UDP, so handling a
single merged list would be a mess. (If the user is setting the
dissector for a TCP port, only those protocols that Ethereal can handle
over TCP should be listed; if the user is setting the dissector for a
UDP port, only those protocols that Ethereal can handle over TCP should
be listed; if the user is setting a dissector for both, only those
protocols that Ethereal can handle over *both* TCP *and* UDP should be
listed, *and* there needs to be a way to let the "Decode As" code get
both the TCP handle *and* the UDP handle and use the right ones. If
somebody really wants that, they need to implement all of the above if
they want the code to be correct.)
Fix the code that handles setting the dissection for the IP protocol
number to correctly update the lists of protocols being dissected as TCP
and as UDP; the code before this change wasn't updating the single such
list to add new protocols.
svn path=/trunk/; revision=4311
if found, return the dissector handle for that port.
Use that routine in the X.25 dissector; revert to attaching a dissector
handle to an X.25 virtual circuit.
svn path=/trunk/; revision=4310
take a dissector handle as an argument, rather than a pointer to a
dissector function and a protocol ID. Associate dissector handles with
dissector table entries.
svn path=/trunk/; revision=4308
1. Changes how can_desegment works so that can_desegment is
only != 0 for whichever dissector is running immediately on
top of whoever offers the can_desegment service.
Thus DCERPC needs no special handling to see if it can trust
can_desegment (which is currently only available ontop of TCP
and not ontop of tcp->nbss->smb).
2. Changes fragment reassembly of transaction smb to only show
the defragmented packet for the transaction smb holding the
first fragment.
To see why, test it with a transaction SMB containing a ~60kb
PDU or larger. The old behaviour had approximately quadratic
behaviour regarding runtime for dissecting such PDUs.
(example: NetShareEnum is a command which can grow really really
large if the number of shares and comments are large)
svn path=/trunk/; revision=4296
than a pointer to a dissector function, as an argument.
This means that the conversation dissector is called through
"call_dissector()", so the dissector itself doesn't have to worry about
checking whether the protocol is enabled or setting
"pinfo->current_proto", so get rid of the code that does that in
conversation dissectors. Also, make the conversation dissectors static.
Get rid of some direct calls to dissectors; replace them with calls
through handles, and, again, get rid of code to check whether a protocol
is enabled and set "pinfo->current_proto" where that code isn't needed.
Make those dissectors static if they aren't already static.
Add a routine "create_dissector_handle()" to create a dissector handle
without registering it by name, if the dissector isn't used outside the
module in which it's defined.
svn path=/trunk/; revision=4281
from being required by anyone other than packet-data.c.
It can now be accessed with call_dissector() with the name "data".
dissect_data is now also of dissect_t.
svn path=/trunk/; revision=4271
access their own "pinfo". A packet_info is stored in epan_dissect_t,
which is created for the dissection of a single packet.
GUI functions which need to access the packet_info of the currently
selected packet used to use "pi"; now they use cfile.edt->pi. cfile's
"edt" member is the epan_dissect_t of the currently-selected packet.
The functionality of blank_packetinfo() was moved into
dissect_packet(), as that's the only place that called blank_packetinfo(),
after a spurious call to blank_packetinfo() was removed from
packet_list_select_cb().
svn path=/trunk/; revision=4246
of packet data captured.
Make the "BYTES_ARE_IN_FRAME()" macro take a "captured length of the
packet" argument.
Add some length checks to capture routines.
svn path=/trunk/; revision=4235
if (and only if) the length of the item being added is 0 (so that it has
no data backing it).
This means the data stream name pointer for the item in question is
null; make sure we handle that.
Use that for some "uses the value from the matching request" fields in
the SMB Pipe protocol.
svn path=/trunk/; revision=4231
structure, the check for a null tvbuff pointer in "alloc_field_info()",
and the "tvb_create_from_top()" macro; they're no longer needed, as
there's no non-tvbuffified dissector code remaining.
svn path=/trunk/; revision=4205
Fix up Info column to put "Request" or "Response" *after* the name of
the request.
Give the Negotiate Protocol request its full name.
svn path=/trunk/; revision=4139
"ds_name"s shouldn't be freed when the tvbuff is freed. (Thanks and a
tip of the Hatlo hat to the FreeBSD memory allocator for complaining
about multiple frees of the same string.)
svn path=/trunk/; revision=4136
FT_INT64 type, and make the Diameter dissector use it.
Handle the 64-bit integer types in the display filter semantics checks.
svn path=/trunk/; revision=4125
It makes no difference if they really are function declarations;
however, in plugins, when building on OSes that don't let
dynamically-loaded modules access functions in the main program (e.g.,
Windows), when compiling a plugin, <plugin_api.h> defines the names of
those functions as (*pointer_name), so they turn into declarations of
pointer variables pointing to the functions in question, and, on
platforms with a def/ref model in the linker, if a plugin has more than
one source file that gets linked into the plugin, the linker may get
upset at two definitions of the same variable.
svn path=/trunk/; revision=4114
former depends on having "guint64" and the latter depends on
"%ll[douxX]" being what's used to print 64-bit integers, and there are
platforms on which Etheeal runs that don't have "guint64" or that don't
use "%ll[douxX]" to print 64-bit integers.
Get rid of the routines to extract 64-bit integers into "gint64"s and
"guint64"s, as per Ronnie Sahlberg's suggestion, to discourage people
from writing code that won't work on all platforms; they should be using
FT_UINT64, or the routines in "int-64bit.c", instead.
svn path=/trunk/; revision=4102
without requiring compiler support for them, and updates to the
Diameter, L2TP, NFS, and NLM dissectors to use it and to the ONC RPC
dissector to allow ONC RPC subdissectors to use it.
svn path=/trunk/; revision=4099
"snprintf()" returns a negative number, that's an error, and we assume
"errno" was set and return NULL, otherwise we cast its return value to
"size_t" and compare it with the size of the buffer we were given, and,
if it was bigger, we know that "snprintf()" didn't generate all the
characters it could be cause they wouldn't have fit, so we set "errno"
to ENOSPC and return NULL.
svn path=/trunk/; revision=4095
doesn't exist, or is out of date with respect to "config.h.win32", it's
remade - stuff in "ftypes" and "dfilter" includes "config.h", and it
should get the "config.h" in "epan".
svn path=/trunk/; revision=4091
there were 2 functions which accepted 'maxlength' == -1, but the function
prototypes had maxlength as a guint --- fixed.
svn path=/trunk/; revision=4087
and generates the path name; have it, if the file is to be opened for
reading on Win32, check whether it exists and, if not, check for it in
the old home directory-based configuration directory and, if so, return
that path instead, so that files saved with earlier versions of Ethereal
will be seen.
svn path=/trunk/; revision=4072
On Windows, put the ".ethereal" directory under the user profile
directory rather than the home directory.
Update the documentation to reflect that, and to fix other out-of-date
information, as well as some typos.
svn path=/trunk/; revision=4068
Use that routine rather than duplicating that code in the routines to
write out the preference file and filter files.
Use it in the code for the color filter dialog, so that the directory in
question is created if necessary.
As that routine returns an error indication, have the code that calls
that routine put up a message box if the attempt fails.
svn path=/trunk/; revision=4065
".ethereal" directory is under it; get rid of "get_home_dir()", and put
its code inside "get_persconffile_dir()". (The personal configuration
file directory may move, on Windows, to the user's profile directory.)
svn path=/trunk/; revision=4062
reside. Use it, rather than concatenating the user's home directory and
".ethereal" in a number of files.
Fix up some additional places to use G_DIR_SEPARATOR_S as the pathname
separator.
svn path=/trunk/; revision=4061
strings used to generate pathnames.
Move the definition of PF_DIR from <epan/epan.h> to <epan/filesystem.h>,
so that files requiring only the definition of PF_DIR don't have to
include <epan/epan.h>, and get rid of no-longer-necessary includes of
<epan/epan.h>.
Add a routine to get the directory for "system files" such as
"/etc/ethers" - it's "/etc" on UNIX, and the datafile directory on
Windows (as there's no "/etc" on Windows). Use that to construct the
pathname of the ethers and ipxnet files.
svn path=/trunk/; revision=4056
which the Ethereal binary is found; there's no notion of "/etc" or of
"/etc/ethers" or "/etc/ipxnets" files on Windows.
Update the documentation to reflect that, and fix a typo in the Ethereal
and Tethereal man pages.
svn path=/trunk/; revision=4055
stuff currently being dissected is part of a packet included in an error
packet (e.g., an ICMP Unreachable packet). Have the TCP dissector not
bother doing reassembly if the TCP segment is part of an error packet,
rather than an actual TCP transmission; other dissectors might want to
treat those packets specially as well.
Add to the "tcpinfo" structure a flag indicating whether the URG flag
was set, rather than having the zero or non-zero value of the urgent
pointer indicate that. (Yes, at least as I read RFC 793, a zero urgent
pointer value isn't useful, as it means "the stuff before this segment
is urgent", but it's certainly possible to put onto the wire a TCP
segment with URG set and a zero urgent pointer.)
Don't dissect the TCP header by grabbing the entire header with
"tvb_memcpy()" and then pulling stuff out of it - extract stuff with
individual tvbuff calls, and put stuff into the protocol tree and the
Info column as we extract it, so that we can dissect a partial header.
This lets us, for example, get the source and destination ports from the
TCP header of the part of a TCP segment included in a minimum-length
ICMPv4 error packet.
svn path=/trunk/; revision=3986
on it and check whether it returned EISDIR, not whether it returns 0 -
EISDIR means it's a directory, 0 means it isn't.
svn path=/trunk/; revision=3939
dissectors to use it, from Ronnie Sahlberg, with additional changes to
handle the case where a frame contains messages that don't run past the
end followed by one that does and where a reassembled chunk has, at the
end, a message that runs past the end of that chunk (because the
reassembly was for an earlier message).
svn path=/trunk/; revision=3923
of protocol-id-plus-datum pairs, so that multiple protocols can attach
information to the same conversation.
Dissectors that attach information to a conversation should not assume
that if they find a conversation it has one of its data attached to it;
the conversation might've been created by another dissector.
svn path=/trunk/; revision=3901
that look up conversations in hash tables, unless they are arguments
that will be ignored; if they're not being ignored, then if the argument
is a null pointer you may get a crash if it's dereferenced, and if it's
not a null pointer you'll only get a match if the conversation has
whatever stuff the arguments points to as its first address or port.
If you match a conversation with a wildcarded address and/or port, and
the address and/or port matched a non-wildcarded search argument, and
the conversation is for a connection-oriented transport protocol, set
the wildcarded address and/or port for the conversation to the value
that matched it.
svn path=/trunk/; revision=3897
"try_conversation_dissector()" does - start with as exact matches as
possible, and then start doing wildcarding - so that it can find
conversations with wildcard addresses or ports even if both address and
port arguments are supplied to it.
svn path=/trunk/; revision=3893
"proto_item_set_text()" except that it appends the result of the
formatting to the item's current text, rather than replacing the item's
current text. Use it in the DNS dissector.
svn path=/trunk/; revision=3880
but, before you set the text, you throw an exception while putting stuff
under the subtree, you end up with an absolutely blank protocol tree
item, which is really gross. Instead of calling
"proto_tree_add_notext()", call "proto_tree_add_text()" with at least a
minimal label - yes, it does mean you do some work that will probably be
unnecessary, but, absent a scheme to arrange to do that work if it *is*
necessary (e.g., catching exceptions), the alternative is an ugly
protocol tree display.
svn path=/trunk/; revision=3879
directory in which global data files are stored. If an installed binary
is being run, that's the correct directory for them; if a build-tree
binary is being run, the "manuf" file will be there, and you can put
other data files there as well, if necessary.
Do the same with plugins, except that, if there's no
"plugins\\{version}" subdirectory of that directory, fall back on the
default installation directory, so you at least have a place where you
can put plugins for use by build-tree binaries. (Should we, instead,
have the Windows build procedure create a subdirectory of the "plugins"
source directory, with the plugin version number as its name, and copy
the plugins there, so you'd use the build-tree plugin binaries?)
Move "test_for_directory()" out of "util.c" and into
"epan/filesystem.c", with the other file system access portability
wrappers and convenience routines. Fix "util.h" not to declare it - or
other routines moved to "epan/filesystem.c" a while ago.
svn path=/trunk/; revision=3858
"standard" plugin directory, and, instead of getting PLUGIN_DIR (the
*real* installation directory) from the configure script, as can be done
in UNIX, attempt to get it by getting the full pathname of the currently
running program and assuming it's in the installation directory.
svn path=/trunk/; revision=3850
"void *" that a dissector can set to point to such a structure; that
means that the stuff in the epan directory doesn't have to know anything
about the protocol-specific private data one dissector passes to
another, and that structure doesn't have to be changed if a dissector
wants to pass some new type of data to another dissector.
svn path=/trunk/; revision=3818
fractions-of-a-second (the units of which are either milliseconds or
microseconds, specified by a Boolean argument), and formats it into a
"DD days, HH hours, MM minutes, SS seconds" using a buffer supplied to
it. Have "time_secs_to_str()" and "time_msecs_to_str()" both use it.
Also, have it correctly handle the case of SS being > 0 but < 1 (which
"time_msecs_to_str()" didn't do).
Rename "rel_time_to_str()" to "rel_time_to_secs_str()", and add a
"rel_time_to_str()" routine that takes a "struct timeval" and hands its
seconds and microseconds values to "time_secs_to_str_buf()". Use
"rel_time_to_secs_str()" to format FT_RELATIVE_TIME values for now; we
might want to use "rel_time_to_str()" for them, though, or make it an
option (either a user option, or a per-field option, using the field
that also holds BASE_ values).
svn path=/trunk/; revision=3806
Defect number: 0011
Date: Jul 26 2001
Releases of Kazlib affected: 1.10 through 1.19
Status: Fixed in 1.20
Modules affected: except.c
Description: Members of the except_t structure needed to be declared
volatile because the structure is automatically allocated in the
except macro, modified after a setjmp() takes place, and accessed
after control returns via longjmp.
Solution: Upgrade to 1.20 or backpatch the fix.
svn path=/trunk/; revision=3793
replace "--with-plugindir" with "--with-plugins", and have the
plugin directory optional - this allows plugins to be disabled;
add "--traditional-cpp" on MacOS X/Darwin (Apple's "cc" compiler
requires it, for some annoying reason, even though it is, as far
as I know, GCC-based, and other GCC's don't require it);
on MacOS X, don't use "pcap_version[]", as, for some annoying
reason, libpcap on MacOS X doesn't define it.
Clean up some whitespace in the help messages for the configure script.
Move the AM_CONDITIONAL for SETUID_INSTALL after the point at which
"enable_setuid_install" is set, as it tests "enable_setuid_install".
svn path=/trunk/; revision=3788
the "epan" directory, as well as the top-level directory, as there's
stuff in the "epan" directory that depends on that.
svn path=/trunk/; revision=3710
* gcc 3.0 warning fixes:
- text2pcap.c: The number of characters to scan should probably not be 0
- wiretap/csids.c: using preincrement on a variable used on both
sides of an assignment might be undefined by the C99(?) standard
* turn on additional warnings for epan and wiretap too
- epan/configure.in
- wiretap/configure.in
* Fix some warnings (missing includes, signed/unsigned, missing
initializers) found by turning on the warnings
- all other files :-)
svn path=/trunk/; revision=3709
"pinfo->{len,captured_len}"-adjusting currently done by the IP
dissector, make the IP dissector call that rather than doing the work
itself, make the IPv6 dissector call that rather than just adjusting the
tvbuff length itself, and make the IPX dissector call that rather than
just adjusting "pi.{len,captured_len}" itself.
This cleans things up a bit, and causes trailers to be properly reported
in IPX-over-Ethernet frames.
svn path=/trunk/; revision=3621
to imply that
1) conversations have source and destination addresses and ports
- they don't (if they did, they'd be monologues, not
conversations), they just have two address/port pairs for the
two endpoints, with one or more of the address or port in the
second pair possibly being wildcarded;
2) the first and second address or port argument to
"find_conversation()" or "try_conversation_dissector()" have
anything to do with the first or second address/port pair in
a conversation - they don't, the two arguments to those
routines are matched against *both* address/port pairs for a
conversation;
as otherwise people might think that they need to add flags to wildcard
the first arguments "conversation_new()" or "find_conversation()" (they
don't, they just have to pass the non-wildcarded address/port first and
then pass the wildcarded one, even if that means passing the destination
first and source second).
svn path=/trunk/; revision=3537
a "Match Selected" on it - we can't do a "Match Selected" if the field
has no value (e.g., FT_NULL) and has a length of 0.
If we unselect the current packet, we don't have a protocol tree, so we
don't have a currently selected field - clear the "Match Selected" menu
item and the display in the status line of information about the
currently selected field.
Move the low-level statusbar manipulation into "gtk/main.c", in routines
whose API doesn't expose anything GTK+-ish.
"close_cap_file()" calls one of those routines to clear out the status
bar, so it doesn't need to take a pointer to the statusbar widget as an
argument.
"clear_tree_and_hex_views()" is purely a display-manipulating routine;
move it to "gtk/proto_draw.c".
Extract from "tree_view_unselect_row_cb()" an "unselect_field()" routine
to do all the work that needs to be done if the currently selected
protocol tree row is unselected, and call it if the currently selected
packet list row is unselected (if it's unselected, there *is* no
protocol tree, so no row can be selected), as well as from
"tree_view_unselect_row_cb()".
Before pushing a new field-description message onto the statusbar, pop
the old one off.
Get rid of an unused variable (set, but not used).
svn path=/trunk/; revision=3513
structures as arguments, that evaluates to "true" if the two addresses
are equal and "false" if they're not equal. Use that macro in the
conversation code.
svn path=/trunk/; revision=3509
