when doing reassembly.
In some additional places, use "tvb_bytes_exist()" to check whether we
have enough data to do reassembly, rather than checking to see if the
frame is short (it might be short but we might still have enough data to
do reassembly).
In DCE RPC, use the fragment length from the header as the number of
bytes of fragment data.
There's no need to check "pinfo->fragmented" before doing reassembly in
the DCERPC-over-SMB-pipes code - either we have all the data or we
don't.
In SNA and WTP reassembly, add a check to make sure we have all the data
to be reassembled.
svn path=/trunk/; revision=7282
Fixed handling of NLP header in SNA
XID handoff table for LLC, and XID dissection for SNA format 3
HPR optional segments in SNA
Most important control vectors in SNA
Route setup messages in SNA
Additional LLC DSAPs for SNA
svn path=/trunk/; revision=7131
Other SNA TH types support fragmentation, but denote it much differently
thant TH FID2. Since I have only FID-2 fragmented packet traces, it's
the only type I could test, and thus the only FID type I coded for.
Many thanks to Nick Baldwin <nick.baldwin@satelcom.co.uk> for
providing the traces and for testing the changes.
svn path=/trunk/; revision=6325
equivalents for the toplevel directory. The removal of winsock2.h will
hopefully not cause any problems under MSVC++, as those files using
struct timeval still include wtap.h, which still includes winsock2.h.
svn path=/trunk/; revision=5932
case before recent changes.
Just use -1 as the last argument to "tvb_new_subset()" if the subset
tvbuff is to run to the end of the parent tvbuff.
svn path=/trunk/; revision=5589
"epan/..." pathnames, so as to avoid collisions with header files in any
of the directories in which we look (e.g., "proto.h", as some other
package has its own "proto.h" file which it installs in the top-level
include directory).
Don't add "-I" flags to search "epan", as that's no longer necessary
(and we want includes of "epan" headers to fail if the "epan/" is left
out, so that we don't re-introduce includes lacking "epan/").
svn path=/trunk/; revision=4586
items to the protocol tree; it's interpreted as "the rest of the data in
the tvbuff". This can be used if
1) the item covers the entire packet or the remaining payload in
the packet
or
2) the item's length won't be known until it's dissected, and
will be then set with "proto_item_set_len()" - if an
exception is thrown in the dissection, it means the item ran
*past* the end of the tvbuff, so saying it runs to the end of
the tvbuff is reasonable.
Convert a number of "proto_tree_add_XXX()" calls using
"tvb_length_remaining()", values derived from the result of
"tvb_length()", or 0 (in the case of items whose length is unknown) to
use -1 instead (using 0 means that if an exception is thrown, selecting
the item highlights nothing; using -1 means it highlights all the data
for that item that's available).
In some places where "tvb_length()" or "tvb_length_remaining()" was used
to determine how large a packet is, use "tvb_reported_length()" or
"tvb_reported_length_remaining()", instead - the first two calls
indicate how much captured data was in the packet, the latter two calls
indicate how large the packet actually was (and the fact that using the
latter could cause BoundsError exceptions to be thrown is a feature - if
such an exception is thrown, the frame really *was* short, and it should
be tagged as such).
Replace some "proto_tree_add_XXX()" calls with equivalent
"proto_tree_add_item()" calls.
Fix some indentation.
svn path=/trunk/; revision=4578
structure to the "packet_info" structure; only stuff that's permanently
stored with each frame should be in the "frame_data" structure, and the
"column_info" structure is not guaranteed to hold the column values for
that frame at all times - it was only in the "frame_data" structure so
that it could be passed to dissectors, and, as all dissectors are now
passed a pointer to a "packet_info" structure, it could just as well be
put in the "packet_info" structure.
That saves memory, by shrinking the "frame_data" structure (there's one
of those per frame), and also lets us clean up the code a bit.
svn path=/trunk/; revision=4370
take a dissector handle as an argument, rather than a pointer to a
dissector function and a protocol ID. Associate dissector handles with
dissector table entries.
svn path=/trunk/; revision=4308
work on dissecting the Information frame of QLLC packets.
Thanks to mario.ferreira@hsbc.com.br for lots of information on SNA
over X.25.
svn path=/trunk/; revision=4207
otherwise, the filtering GUI gets very upset when you try to construct a
filter expression to test the value of that field. Make them BASE_DEC.
svn path=/trunk/; revision=3334
statements.
Move the setting of the Protocol column in various dissectors before
anything is fetched from the packet, and also clear the Info column at
that point in those and some other dissectors, so that if an exception
is thrown, the columns don't reflect the previous protocol.
"Tvbuffify" the Mobile IP dissector (it took old-style arguments, and
then converted them into tvbuff arguments, so there wasn't much to do,
other than to fix references to "fd" to refer to "pinfo->fd").
In the SCTP dissector, refer to the port type and source and destination
ports through "pinfo" rather than through the global "pi", as it's a
tvbuffified dissector.
In the SMTP and Time Protocol dissectors, use "pinfo->match_port" rather
than "TCP_PORT_SMTP" when checking whether the packet is a request or
reply, just in case somebody makes a non-standard port be dissected as
SMTP or Time. (Also, remove a bogus comment from the Time dissector; it
was probably cut-and-pasted from the TFTP dissector.)
svn path=/trunk/; revision=2938
"{old_}heur_dissector_add()", "{old_}conv_dissector_add()", and
"register_dissector()", so that an entry in those tables has associated
with it the protocol index of the protocol the dissector handles (or -1,
if there is no protocol index for it).
This is for future use in a number of places.
(Arguably, "proto_register_protocol()" should take a dissector pointer
as an argument, but
1) it'd have to handle both regular and heuristic dissectors;
2) making it take either a "dissector_t" or a union of that and
a "heur_dissector_t" introduces some painful header-file
interdependencies
so I'm punting on that for now. As with other Ethereal internal APIs,
these APIs are subject to change in the future, at least until Ethereal
1.0 comes out....)
svn path=/trunk/; revision=2849
with not terminating their arrays because they knew the limits of the
value used to look up strings in the value_string array, but the
dfilter_expr_dlg does not know these limits and must rely on the terminating
{0, NULL} record.
Also, in SNA fixed a bug in which a field should have been defined as FT_UINT8
but was defined as FT_BOOLEAN.
In WTP, fixed a value string which had duplicate keys.
svn path=/trunk/; revision=2817
protocols, in addition to adding structures to the list of filterable
fields. Give it an extra argument that specifies a "short name" for the
protocol, for use in such places as
pinfo->current_proto;
the dialog box for constructing filters;
the preferences tab for the protocol;
and so on (although we're not yet using it in all those places).
Make the preference name that appears in the preferences file and the
command line for the DIAMETER protocol "diameter", not "Diameter"; the
convention is that the name in question be all-lower-case.
Make some routines and variables that aren't exported static.
Update a comment in the ICP dissector to make it clear that the
dissector won't see fragments other than the first fragment of a
fragmented datagram.
svn path=/trunk/; revision=2810
can be put, and a pointer to the string for the column, which might or
might not point to that buffer.
Add a routine "col_set_str()", which sets the string for the column to
the string passed to it as an argument; it should only be handed a
static string (a string constant would be ideal). It doesn't do any
copying, so it's faster than "col_add_str()".
Make the routines that append to columns check whether the pointer to
the string for the column points to the buffer for the column and, if
not, copy the string for the column to the buffer for the column so that
you can append to it (so you can use "col_set_str()" and then use
"col_append_str()" or "col_append_fstr()").
Convert a bunch of "col_add_str()" calls that take a string constant as
an argument to "col_set_str()" calls.
Convert some "col_add_fstr()" calls that take a string constant as the
only argument - i.e., the format string doesn't have any "%" slots into
which to put strings for subsequent arguments to "col_set_str()" calls
(those calls are just like "col_add_str()" calls).
Replace an END_OF_FRAME reference in a tvbuffified dissector with a
"tvb_length(tvb)" call.
svn path=/trunk/; revision=2670
the following:
It is now possible to enable/disable a particular protocol decoding
(i.e. the protocol dissector is void or not). When a protocol
is disabled, it is displayed as Data and of course, all linked
sub-protocols are disabled as well.
Disabling a protocol could be interesting:
- in case of buggy dissectors
- in case of wrong heuristics
- for performance reasons
- to decode the data as another protocol (TODO)
Currently (if I am not wrong), all dissectors but NFS can be disabled
(and dissectors that do not register protocols :-)
I do not like the way the RPC sub-dissectors are disabled (in the
sub-dissectors) since this could be done in the RPC dissector itself,
knowing the sub-protocol hfinfo entry (this is why, I've not modified
the NFS one yet).
Two functions are added in proto.c :
gboolean proto_is_protocol_enabled(int n);
void proto_set_decoding(int n, gboolean enabled);
and two MACROs which can be used in dissectors:
OLD_CHECK_DISPLAY_AS_DATA(index, pd, offset, fd, tree)
CHECK_DISPLAY_AS_DATA(index, tvb, pinfo, tree)
See also the XXX in proto_dlg.c and proto.c around the new functions.
svn path=/trunk/; revision=2267
dissectors to be registered as dissectors for particular ports,
registered as heuristic dissectors, and registered as dissectors for
conversations, and have routines to be used both by old-style and
new-style dissectors to call registered dissectors.
Have the code that calls those dissectors translate the arguments as
necessary. (For conversation dissectors, replace
"find_conversation_dissector()", which just returns a pointer to the
dissector, with "old_try_conversation_dissector()" and
"try_conversation_dissector()", which actually call the dissector, so
that there's a single place at which we can do that translation. Also
make "dissector_lookup()" static and, instead of calling it and, if it
returns a non-null pointer, calling that dissector, just use
"old_dissector_try_port()" or "dissector_try_port()", for the same
reason.)
This allows some dissectors that took old-style arguments and
immediately translated them to new-style arguments to just take
new-style arguments; make them do so. It also allows some new-style
dissectors not to have to translate arguments before calling routines to
look up and call dissectors; make them not do so.
Get rid of checks for too-short frames in new-style dissectors - the
tvbuff code does those checks for you.
Give the routines to register old-style dissectors, and to call
dissectors from old-style dissectors, names beginning with "old_", with
the routines for new-style dissectors not having the "old_". Update the
dissectors that use those routines appropriately.
Rename "dissect_data()" to "old_dissect_data()", and
"dissect_data_tvb()" to "dissect_data()".
svn path=/trunk/; revision=2218
a particular type, rather than taking a varargs list, along the lines of
the "proto_tree_add_XXX_format()" routines.
Replace most calls to "proto_tree_add_item()" and
"proto_tree_add_item_hidden()" with calls to those routines.
Rename "proto_tree_add_item()" and "proto_tree_add_item_hidden()" to
"proto_tree_add_item_old()" and "proto_tree_add_item_hidden_old()", and
add new "proto_tree_add_item()" and "proto_tree_add_item_hidden()"
routines that don't take the item to be added as an argument - instead,
they fetch the argument from the packet whose tvbuff was handed to them,
from the offset handed to them.
svn path=/trunk/; revision=2031
Add exceptions routines.
Convert proto_tree_add_*() routines to require tvbuff_t* argument.
Convert all dissectors to pass NULL argument ("NullTVB" macro == NULL) as
the tvbuff_t* argument to proto_tree_add_*() routines.
dissect_packet() creates a tvbuff_t, wraps the next dissect call in
a TRY block, will print "Short Frame" on the proto_tree if a BoundsError
exception is caught.
The FDDI dissector is converted to use tvbuff's.
svn path=/trunk/; revision=1939
for protocols that run inside 802.2 LLC register themselves with it
using "dissector_add()".
Make various dissectors static if they can be, and remove from header
files declarations of those dissectors.
svn path=/trunk/; revision=1872
it in SOCKS dissector.
(Okay, how many times am I going to modify packet.h today, forcing you
to re-compile everything? :-)
svn path=/trunk/; revision=1850
proto_tree_add_protocol_format()
proto_tree_add_uint_format()
proto_tree_add_ipxnet_format()
proto_tree_add_ipv4_format()
proto_tree_add_ipv6_format()
proto_tree_add_bytes_format()
proto_tree_add_string_format()
proto_tree_add_ether_format()
proto_tree_add_time_format()
proto_tree_add_double_format()
proto_tree_add_boolean_format()
If using GCC 2.x, we can check the print-format against the variable args
passed in. Regardless of compiler, we can now check at run-time that the
field type passed into the function corresponds to what that function
expects (FT_UINT, FT_BOOLEAN, etc.)
Note that proto_tree_add_protocol_format() does not require a value field,
since the value of a protocol is always NULL. It's more intuitive w/o the
vestigial argument.
Fixed a proto_tree_add_item_format-related bug in packet-isis-hello.c
Fixed a variable usage bug in packet-v120.c. (ett_* was used instead of hf_*)
Checked in Guy's fix for the function declearation for proto_tree_add_text()
and proto_tree_add_notext().
svn path=/trunk/; revision=1713
of SNA in a packet changes the character encoding from the default ASCII
to EBCDIC.
The hex-printing routines in the GUI code and in the printing code convert
to EBCDIC if appropriate.
svn path=/trunk/; revision=1089
dynamically-assigned "ett_" integer values, assigned by
"proto_register_subtree_array()"; this:
obviates the need to update "packet.h" whenever you add a new
subtree type - you only have to add a call to
"proto_register_subtree_array()" to a "register" routine and an
array of pointers to "ett_", if they're not already there, and
add a pointer to the new "ett_" variable to the array, if they
are there;
would allow run-time-loaded dissectors to allocate subtree types
when they're loaded.
svn path=/trunk/; revision=1043
structure to "dl_src"/"dl_dst", "net_src"/"net_dst", and "src"/"dst"
addresses, where an address is an address type, an address length in
bytes, and a pointer to that many bytes.
"dl_{src,dst}" are the link-layer source/destination; "net_{src,dst}"
are the network-layer source/destination; "{src,dst}" are the
source/destination from the highest of those two layers that we have in
the packet.
Add a port type to "packet_info" as well, specifying whether it's a TCP
or UDP port.
Don't set the address and port columns in the dissector functions; just
set the address and port members of the "packet_info" structure. Set
the columns in "fill_in_columns()"; this means that if we're showing
COL_{DEF,RES,UNRES}_SRC" or "COL_{DEF,RES,UNRES}_DST", we only generate
the string from "src" or "dst", we don't generate a string for the
link-layer address and then overwrite it with a string for the
network-layer address (generating those strings costs CPU).
Add support for "conversations", where a "conversation" is (at present)
a source and destination address and a source and destination port. (In
the future, we may support "conversations" above the transport layer,
e.g. a TFTP conversation, where the first packet goes from the client to
the TFTP server port, but the reply comes back from a different port,
and all subsequent packets go between the client address/port and the
server address/new port, or an NFS conversation, which might include
lock manager, status monitor, and mount packets, as well as NFS
packets.)
Currently, all we support is a call that takes the source and
destination address/port pairs, looks them up in a hash table, and:
if nothing is found, creates a new entry in the hash table, and
assigns it a unique 32-bit conversation ID, and returns that
conversation ID;
if an entry is found, returns its conversation ID.
Use that in the SMB and AFS code to keep track of individual SMB or AFS
conversations. We need to match up requests and replies, as, for
certain replies, the operation code for the request to which it's a
reply doesn't show up in the reply - you have to find the request with a
matching transaction ID. Transaction IDs are per-conversation, so the
hash table for requests should include a conversation ID and transaction
ID as the key.
This allows SMB and AFS decoders to handle IPv4 or IPv6 addresses
transparently (and should allow the SMB decoder to handle NetBIOS atop
other protocols as well, if the source and destination address and port
values in the "packet_info" structure are set appropriately).
In the "Follow TCP Connection" code, check to make sure that the
addresses are IPv4 addressses; ultimately, that code should be changed
to use the conversation code instead, which will let it handle IPv6
transparently.
svn path=/trunk/; revision=909
Guy Harris