This change must be reviewed/approved by the script's author (Gerald).
Change-Id: Id89c1d05bf43cdd2d6823b5ef46162a9f11fb263
Reviewed-on: https://code.wireshark.org/review/4972
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a script to create each PNG from its source SVG using Inkscape
(which can conveniently be run from the command line).
Change-Id: Ief7410cf76fb1553ce56f1c6bc1ade03ab5db1d6
Reviewed-on: https://code.wireshark.org/review/4964
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Plumb signals and slots for changing the text size in the main window.
Remove the bold font code from WiresharkApplication. It was only used in
ByteViewText. Adjust the icons a bit.
Bug: When we change the font preferences the packet list stops drawing
cached strings. I haven't been able to track down the cause.
Change-Id: I609d740c9f26265628fa4b7de1b75b0e56651387
Reviewed-on: https://code.wireshark.org/review/4269
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The GNOME HIG says "Where a corresponding toolbar icon exists, a menu
icon should mirror its design." The Windows and OS X HIGs say that you
should use them for common or familiar actions but otherwise avoid
clutter. I think icons in the "File" menu look like crap. Try to strike
a balance.
Use the 16x16 application icon for both the main web site and the wiki
since that's the favicon used on both sites.
Assume that "Reload" isn't used very often and remove it from the
toolbar.
Don't use a menu icon for the about box.
Other minor fixups.
Change-Id: I855211c218d266c2e9ed5acbe05a08750ab6d157
Reviewed-on: https://code.wireshark.org/review/4246
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Set the main window icon to the "wsiconcap" version while we're capturing
similar to the GTK+ version. Verified on Windows. Not sure if this will
do anything on other platforms.
Change-Id: I9b082601a2c47e5f52cc38ac8d9b4d9f5fb9a4d9
Reviewed-on: https://code.wireshark.org/review/4230
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add ".on" versions of the x-capture-start icon along with corresponding
code in the StockIcon constructor to look for ".on" variants and add
them with the QIcon::On state.
Make the plain versions of x-capture-start blue to match the general
application icon. The goal is to make the toolbar and app icon fins blue
when Wireshark is "at rest" and green when it's capturing.
Change-Id: I31f4f9d910fc99c41d7c63bd9a722db1611760c7
Reviewed-on: https://code.wireshark.org/review/4225
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The new icons are patterned after the existing capture icons. They could
probably benefit from some adjustments here and there.
Start moving toward icon names and a directory layout compliant with
freedesktop.org's Icon Naming Specification and Icon Theme
Specification. We aren't fully compliant and might never be but anyone
with exposure to FDO icon themes should at least know where everything
is.
Make Capture Start (x-capture-start) the first icon in the toolbar.
Define the Colorize Packets, Auto Scroll, and zoom icons even though the
Qt UI doesn't use them yet.
Leave the Capture Filter, Display Filter, Coloring Rules, Preferences,
and Help icons off for now. The GTK+ toolbar is overly cluttered and I'm
not sure they're necessary.
Try not to break ui/gtk/toolbar_icons.h.
Remove welcome.qrc. I initially added it in case we needed to overlay
the welcome screen with translucent .pngs but that never happened.
To do:
- Move the old GTK+ icons to their own directory.
- Find a better name for the "toolbar" directory. "stock"?
- Make the toolbar configurable.
Change-Id: Ie07592113d307b8db786aedace672312a870fe38
Reviewed-on: https://code.wireshark.org/review/4182
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make sure the Qt UI is named "Wireshark" and its executable is named
"wireshark" or "wireshark.exe". Make sure the GTK+ UI is named
"Wireshark 1" or "Wireshark (GTK+)" depending on how much the target
audience is likely to care about UI toolkits. Make sure the GTK+
executable is named "wireshark-gtk" or "wireshark-gtk.exe".
It looks like moving to Qt 5.3 (g978faf3) broke the PortableApps
package. It's likely even more broken now.
Autotools out-of-tree builds also broke on Ubuntu 12.02 (automake
1.11.3) at some point. The first attempt to compile in ui/qt returns
"error: source_file.cpp: No such file or directory". The second attempt
works. Out-of-tree builds work fine on Ubuntu 14.04 (automake 1.14.1).
Tested:
- Nmake builds
- NSIS packaging
- CMake builds (Windows, OS X)
- Autotools build and distcheck
- RPM packaging
To do:
- Test Debian packaging
- Fix PortableApps
Change-Id: I66429870e05fd2d6fc901942477959ed6164fce2
Reviewed-on: https://code.wireshark.org/review/3919
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We decided at sharkfest that this wasn't the right design for file dissection;
we have more-or-less settled on way forward, but nobody's shown interest in
implementing it. Whether or not that ever happens, this code is effectively
dead and should be removed.
Change-Id: I14d6086df3204fffb6485228db39d9f407661417
Reviewed-on: https://code.wireshark.org/review/3400
Petri-Dish: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
This reverts commit 2fbedef5d1.
Most of the change to remove "lib" seems to work, but the list of libraries to sign appears not to be in the source repository, so I can't make that step work.
Change-Id: I88245c046b1cf1c76c73fc8e4bc13868e0df4e44
Reviewed-on: https://code.wireshark.org/review/2971
Reviewed-by: Guy Harris <guy@alum.mit.edu>
- allow to change the interface options in the table
- save the options to preferences when the dialog is left
- add a field for setting a capture filter for all selected interfaces
- add a "Compile BPF" button and a window to show the compiled filter output
- try to address Alexis' and Evan's comments
Change-Id: Ic1272e29183ec80e2d2f4b3e494c79dabe2c3b6f
Reviewed-on: https://code.wireshark.org/review/1946
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
(Using sed : sed -i '/^\# \$Id\$/,+1 d') (start with dash)
Change-Id: Ia4b5a6c2302f6a531f6a86c1ec3a2f8205c8c2dd
Reviewed-on: https://code.wireshark.org/review/881
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This is a VERY PRELIMINARY version of tfshark. It's an attempt to jumpstart FileShark and its architecture. Right now it's mostly just a very stripped down version of tshark with all of the necessary build modifications (including now building filetap library since tfshark depends on it)
This code has helped me identify what I believe to be all of the necessary layers for a complete fileshark architecture. And those layers will slowly be added in time (patches always welcome!).
svn path=/trunk/; revision=54646
This is intended as the "tap library" for fileshark. Right now its basically just a very stripped down (and renamed) copy of the wiretap library. The goal is to remove "capture" and "wire" specific functionality out of the file handling to make it easier/simpler to support non-capture type files in the epan architecture.
svn path=/trunk/; revision=54531
From Deon van der Westhuysen
- Bug fix: object leak in stats_tree after a tap reset (for example apply statistics preferences with a stats_tree window open)
- Bug fix: correct sample code in README.stats_tree
- Add: slash in plug-in name now creates submenu as docs describe (was a bug?)
- Add: menu separator before the stat_tree registered plug-ins
- Add: stats_tree can now calculate averages for nodes; automatically calculated for range nodes. Add section in README.stats_tree describing averages.
- Add: stats_tree can now calculate burst rate of each node (like rate but with a shorter, sliding time window)
- Add: sorting for stats_tree plug-ins. Can sort on node name, count, average, min, max values and burst rate.
- Add: preferences for stats_tree system (default sort column, burst calc params)
- Add: stats_tree window copy to clipboard and export and plain text, csv and XML.
- Added sample of new functionality in $srcdir/plugins/stats_tree/pinfo_stats_tree.c
- Moved all stats_tree sample plug-ins to "IP Statistics" submenu.
svn path=/trunk/; revision=53657
Add get_tcp_stream_count() to the TCP dissector and modify
graph_segment_list_get() to allow matching based solely on a stream.
Use text instead of icons for the mouse click behavior buttons. Remove
their PNG resources since we aren't using them any more. Fix setting the
cursor in the graph widget.
svn path=/trunk/; revision=51989
Rename some methods. Add the ability to toggle time and sequence number
origins. Add more keyboard shortcuts. Comment out abs_secs abs_usecs in
the segment struct since it looks like we aren't using them. Make sure
we stay in the same TCP stream.
svn path=/trunk/; revision=51856
with enhanced versions from Elliott.
Switch the interface configuration icon to the "gear" version. This
matches the gear in the capture icon.
svn path=/trunk/; revision=49059
wsiconcap. Make the capture stop icon red. Replace wsiconcap with an
earlier version which has gears instead of a record button.
svn path=/trunk/; revision=48818
it more obvious (particularly at 16x16 pixels) that it and the "start
capture" icons work like media controls.
Update compress-pngs to match the latest version of pngcrush and
recompress our PNGs. Add a "clean-pixmaps" target to ui/gtk/Makefile.am
to make it easier to rebuild our pixbuf includes.
svn path=/trunk/; revision=48776
too small, so add corrected ones. Add SVG versions of the new toolbar
icons. Use consistent naming for alternate icons. Remove some
no-longer-used XPMs. Add a script to compress PNGs using various
utilities and run it. Regenerate the pixbuf includes using the smaller
PNGs.
svn path=/trunk/; revision=48591
Use the PNG versions of the new application icons.
Remove the XPM versions of the Wireshark application and capture icons.
To paraphrase Zoidberg, XPMs are bad and we should feel bad. Remove
xpm_to_widget_from_parent (which we weren't using and likely won't use
in the future).
Replace wiki_24.xpm (which was a GNOME or GTK+ stock icon IIRC) with the
16x16 and 24x24 versions emblem-web.png from GNOME icon theme 2.30.3.
This version was used specifically because it's GPLv2 and later versions
are GPLv3.
Update image/README.
svn path=/trunk/; revision=48565
Add comments noting that
- We might want to do something different when the bookmark button is
pressed.
- The display filters (dfilters file) and gui.filter_expressions
preferences should be merged.
- Many buttons on Qt4 + OS X + unifiedTitleAndToolBarOnMac makes the
main window really wide.
Add a qstring_strdup convenience routine. Add "disabled" display filter
edit icons. Fix up whitespace and descriptions in a couple of places.
svn path=/trunk/; revision=47522
Get rid of user-hostile behavior. In the layout preferences pane 2 & 3
radio buttons overrode the user's selection if a duplicate item was
selected. Now we assume that the user knows what he or she is doing and
steal duplicate selections from the other panes.
Qt:
Match the new GTK+ behavior in the layout preferences. Add padding
around the layout images. Add toolbar style preferences to the
Appearance pane (instead of the layout pane).
All:
Remove the selection mode and scrollbar placement prefs and mark them
obsolete as recently discussed on -dev.
Adjust the layout images yet again after more Awful Monitor Testing.
svn path=/trunk/; revision=47214
border. Add them as pixbufs to ui/gtk/toolbar_icons.h and use them to
replace the file icon XPM in stock_icons.c. Add modelines.
svn path=/trunk/; revision=46413
and provide instant feedback in the Win32 file dialog similar to the Qt
code. Tango-ize some colors. Escape a backslash in QtShark.pro.
svn path=/trunk/; revision=45430
shared "file_add_extension" routine. We no longer support _MSC_VER <
1400 so get rid of some clutter. Add a gzip checkbox to the Win32 export
packets dialog. Windows code hasn't yet been tested (and is likely
broken). I'll fix it shortly.
svn path=/trunk/; revision=45296
shown in two places and there's no reason to show it in a third.
Use CommDlg_OpenSave_GetFilePath instead of CommDlg_OpenSave_GetSpec so
that previews work properly for folders.
svn path=/trunk/; revision=43877
create a usable wireshark.exe for x64 using Visual C++ 10. Change the
name of VCREDIST_DLL to PROCESSOR_ARCHITECTURE to more accurately
reflect what it's used for. Allow MSVC_VARIANT to be set from the
system environment, mainly to keep me from accidentally clobbering it
in the future.
svn path=/trunk/; revision=35687
pixbuf versions of the wired, wireless, and bluetooth interface icons to
gtk/network_icons.h. In the interface list use the new icons in all
their alpha-channel-infested glory. Add Makefile targets for rebuilding
the pixbuf files.
svn path=/trunk/; revision=30922