Fix the bug related to Option template:
- System scope (check that options scope size is == 4, not <= 4)
- Interface scope (same)
Same fix for fields BytesExported PacketsExported FlowsExported.
Also fix some tabulations in a previous patch related to IPv6 Addresses.
svn path=/trunk/; revision=24138
1/ patches to support the libpcap/SITA format 'WTAP_ENCAP_SITA'.
2/ patches to the LAPB dissector to accept MLP (Multi-link protocol)
(although MLP dissection has _not_ been added (yet)).
3/ New protocol dissectors for:
a) SITA's WAN layer 0 status header,
b) An airline protocol ALC,
c) An airline (and other industry) protocol UTS.
These patches are submitted as a set since the new protocol dissectors are not
useful without the libpcap/SITA related changes, and there is no point in
having those changes without the additional dissectors.
This fixes bug/enhancement 2016.
svn path=/trunk/; revision=23885
Error message when capturing too short WTAP_ENCAP_USB_LINUX type packets
contains a copy-paste typo.
From me:
Fix some addresses in AUTHORS.
svn path=/trunk/; revision=23882
Patch to do the following:
1) Dissect CIE Lists in NHRP Extensions
2) Dissect original NHRP packet in Error Indication
3) Support for Cisco NAT extensions
4) Support for Cisco NHRP Traffic Indication packet
svn path=/trunk/; revision=23587
quit. Temporary coloring filters can be set by:
- pressing <ctrl>-<digit> will create a conversation coloring filter based on the
addresses of the currently selected packet (order TCP/UDP/IP/Ethernet)
This can also be achieved from the "View|Colorize Conversation" menu.
- Rightclicking on a packet in the packet-list will give the option to
"Colorize Conversation" just as "Conversation Filter" does.
- Rightclicking on an item in the packet-detail-list will give the option to
"Colorize with filter" which works similar to "Apply as filter"
Temporary filters can be cleared from the same menus or by pressing <ctrl>-<space>.
This patch also adds an item to the above mentioned menu's to add a permanent color filter
in the same way.
The colors for the temporary coloring rules are now hardcoded as I do not know
how to change the color of menu-items and therefore I chose to use icons to
show the actual color of each of the ten temporary coloring rules. Is it at all
possible to have different menu items in different colors?
One other way of solving this is to recreate the icons on the fly after changing
the colors. I will have a look into that once it is clear whether I can use
different colors within the menu structure.
svn path=/trunk/; revision=23560
This patch updates the DTLS dissector to be compatible with OpenSSL 0.9.8f in
the following ways:
* Handle both SSL version number 0xfeff (RFC 4347 and OpenSSL 0.9.8f), and
0x100 (Used by OpenSSL 0.9.8e and earlier)
* Reassemble fragmented handshake messages.
svn path=/trunk/; revision=23369
This patch adds support for IMPS 1.3 protocol dissection and also
updates IMPS 1.2 protocol to approved release version.
From me:
- Updated vals_wbxml_public_ids table.
- Reindented file.
svn path=/trunk/; revision=23078
found by desktop-file-validate:
wireshark.desktop: warning: value "" for key "Path" in group "Desktop Entry"
does not look like an absolute path
wireshark.desktop: warning: value "GNOME;Application;Network;" for key
"Categories" in group "Desktop Entry" contains a deprecated value
"Application"
wireshark-root.desktop: warning: key "Encoding" in group "Desktop Entry" is
deprecated
wireshark-root.desktop: warning: value "" for key "Path" in group "Desktop
Entry" does not look like an absolute path
wireshark-root.desktop: warning: value "GNOME;Application;Network;" for key
"Categories" in group "Desktop Entry" contains a deprecated value
"Application"
svn path=/trunk/; revision=23034
- reassembling of fragmented TIPCv2 messages
- calling of heuristic subdissectors
- multicast upper+lower bound header fields are now shown
- corrects few typos in the comments in packet-tipc.c
svn path=/trunk/; revision=22889
When LACP packets have the actor state or partner state fields set to 0x00,
wireshark prints the state like this (note the closing parenthesis):
Actor State: 0x00)
Since there are no flags set, this fields should be printed like this:
Actor State: 0x00
svn path=/trunk/; revision=22594
add it to the distributed files, to the Win32 NSIS and U3 packages. UNIX packages will still miss this (optional) file.
svn path=/trunk/; revision=22487
- add support of session management for tcap ANSI.
(In fact, this support already exist for ANSI MAP subdissector, but as our
simulators can reuse the tcap transaction Id, the decoding of the response
may be wrong)
- move the code related to asn1 in tcap.cnf, and update tcap.cnf
- move the code related to the session management in tcap-persistentdata
- add a compilation option to free the entry in the hashtable for a closed
transaction. This is used only for tshark statistics generation, with huge file.
- cleanup and add some comments
Add Id tags to epan/tcap-persistentdata.{c,h}
svn path=/trunk/; revision=22415
last draft, draft-ietf-behave-rfc3489bis-07. Changelog:
* My employer is now sponsoring this work, so added a copyright line.
* Added a comment for each method/attribute with the RFC/I-D where is
it defined, so it will be easier to add new STUN usages.
* Removed the SHARED-SECRET method.
* Removed the PASSWORD and REFRESH-INTERVAL attributes.
* Changed "Response" to "Success Response".
* Changed "Error Reason Phase" to "Error Reason Phrase".
* Added reassembly for TCP segments on STUN2.
* Updated STUN acronym expansion.
* Renamed STUN2_ERROR to ERROR_RESPONSE.
* Changed the value of attribute FINGERPRINT from 0x8025 to 0x8028.
* Display if an unknown attribute is comprehension-optional or
comprehension-required.
* Reorganized order of attributes in the dissector code.
* The message length is now displayed in decimal.
svn path=/trunk/; revision=22383
receiving a SES MAJOR SYNC POINT, as this indicates the end of the
COTP DT Data stream. Previous the RTSE dissector was called when
receiving a COTP DT Data fragment with the "last data unit" bit set,
but this does not work with messages fragmented in RTSE. Reassembly
can be turned off in the preferences.
svn path=/trunk/; revision=22176
- Remove ethertype preference from recently added FCoE dissector
Me:
- Add Joe to the AUTHORS list
- Change previous line in AUTHORS list from @ to [AT] in e-mail address
svn path=/trunk/; revision=22133
Replace the Interbase dissector by a Firebird/Interbase
dissector.
Me:
Fix warnings about unused parameters
Fix warnings about unused variables
Fix warning about unused function
Fix warning about mixed code and declaration
Declare all dissection functions static
Remove function declarations and move the switching
function down instead.
Update AUTHORS file
Add $Id$ and email address to file header
Fix filename in first comment line
svn path=/trunk/; revision=21843
The attached patch adds ability of of creating radio button, drop-down
list and range type preference entries to the Lua plugin.
It also fixes a lua compile warning/error in wslua_gui.c.
The patch is written by Tamas Regos, he asked me to send it to the list.
svn path=/trunk/; revision=21655
Attachment is a patch for adding a new Juniper NSRP dissector. In this patch, OICQ author email address
<dubingyao@gmail.com> has also been updated to <secfire@gmail.com>.
svn path=/trunk/; revision=21599
the current SVN (rev 21448) 802.11 WMM TSPEC dissector seems to have
some bugs.
TS Info field should be three bytes long, not two. Suspension Interval
field is missing altogether, shifting all other fields by four bytes.
Maximum Burst Size, Minimum PHY Rate, Peak Data Rate and Delay Bound
are in wrong order.
svn path=/trunk/; revision=21450
I would like to handle the rare situation of Little Endian encoded
IP addresses, so i added a function which reads the address with
tvb_get_ipv4(), then swaps the bytes before SET_ADDRESS().
svn path=/trunk/; revision=21397
- Break out and display A-MSDUs
- HT Control field (currently disabled)
- Action No Ack
- HT Information IE
- HT Capability IE
- Block Ack Request
- Secondary Channel Offset Tag
- Measurement Request Tag
- Measurement Report Tag
...along with a bunch of other updates, including displaying the
type/subtype as a hex value (first nibble: type, second nibble: subtype).
svn path=/trunk/; revision=21391
New dissector support, SHIM6
checked in with the following modifications :
- use of proto_tree_add_item whenever possible (addition of several hf_items),
- use distinct subtree idx for each subtree,
- addition of some subtrees,
- split shim_opts in several functions,
- accurate incrementation of offset in locator preferences (in case of option length > 3)
- add true_false_string for critical options and protocol differentiation (hip, shim6)
- add ipv6.shim6.checkksum_good, ipv6.shim6.checkksum_bad, cksum expert info
section added to AUTHORS
svn path=/trunk/; revision=21390
Dissector for the DRDA protocol. This is the protocol used by among
others the DB2 database.
modify his entry in AUTHORS
svn path=/trunk/; revision=21331
I've refactored the offending code branch and added some comments so
hopefully the intent is a bit clearer. The loop termination conditions
are now obviously independent of the content on the wire (they were
meant to be before, but I admit it was obscure). I've tried using the
ephemeral memory routines.
Add a check for a maximum fragment count, and bail out of reassembly instead
of triggering an ep_alloc exception. Add Julian to AUTHORS. Update the
release notes.
svn path=/trunk/; revision=21007
Stig Bjørlykke