Dissector for Intelligent Transport System facility messages:
- Cooperative Awareness Message (CAM)
- Decentralized Environmental Notification Message (DENM)
- Infrastructure to Vehicle Information Message (IVIM)
- MAP (topology) Extended Message (MAPEM)
- Signal Phase And Timing Extended Message (SPATEM)
- Signal Request Extended Message (SREM)
- Signal request Status Extended Message (SSEM)
- Electric Vehicle Charging Spot Notification (EVCSN)
- Electric Vehicle - Recharging Spot Reservation (EVRSR)
- Tyre Information System (TIS) and Tyre Pressure Gauge (TPG) interoperability
Subdissectors:
- ITS version if ever the ITS PDU header is changed
- Version << 16 | MessageID to register new message dissectors
- RegionId << 16 | type to register regional extensions
AddGrpC regional additions already provided
TAP:
- its TAP with ItsPduHeader fields provided
Bug: 15148
Change-Id: I4c71d4dfa1d5d63cb57f61a4e1436a60a3482205
Reviewed-on: https://code.wireshark.org/review/31049
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Implements V2X protocol dissectors:
* Geonetworking (network layer):
Dissector is registered on top of Ethernet (ethertype=0x8947). Secured
Packets are dissected up to the basic header, the rest is shown as data.
GN_ADDR address type is registerd and provides resolution of station
type and country code in the address. MID is shown as an ethernet address.
All the fields are dissected for non Secured Packets.
A subdissector table named "geonw.ch.nh" is provided on the next header
field. IPv6 is automatically registered. Heuristic dissectors is not
supported. If no dissector is foundd, payload is shown as data.
A preference boolean allows to enable/disable sequence number checking.
Tap "geonw" gets headers of all packets (with most fields).
Expert info tests if and provide feedback on:
- version is zero (no other version possible),
- reserved fields are zeros,
- payload_len matching with reported length of buffer,
- Remaining Hop Limit is 1 for Beacon and SHB,
- low RHL or RHL > Max Hop Limit,
- country code is less than 999 (3 digits ITU-T E.164),
- latitude, longitude, heading and angle limits,
- (suspected) duplicate packets,
- LS_REQUEST/LS_REPLY matching.
* Basic Transport Portocol:
BTP-X (X=A or B) dissectors are registered on top of Geonetworking.
Subdissector tables "btpx.port" allow to register for a given port,
while heuristic dissector can register to "btpx.payload". Decode as
capability is supported.
"btpx" taps get headers of all packets with ports/@ infos.
"btpx_follow" taps get the payload.
Bug: 15148
Change-Id: Iab5f4486d4c38068d9ad4361e77296b747f9b1bb
Reviewed-on: https://code.wireshark.org/review/30992
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
New built-in dissector for PCOM protocol (ASCII and binary modes included)
Bug: 15315
Change-Id: Ie13da6bfd7fefefbc5bb5df3461c7fc18261df81
Reviewed-on: https://code.wireshark.org/review/30823
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
More information on Apple's proprietary AWDL protocol can be found in
Milan Stute, David Kreitschmann, and Matthias Hollick. "One Billion Apples'
Secret Sauce: Recipe for the Apple Wireless Direct Link Ad hoc Protocol"
in ACM MobiCom '18. https://doi.org/10.1145/3241539.3241566
Bug: 15245
Change-Id: I5ce18125b3c957f338909e46f18e30405a3d3941
Reviewed-on: https://code.wireshark.org/review/30413
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Install headers to support plugins development on Windows.
Change-Id: I3161bd2f730edf62ab44fee6ce4fedbb9aee0d31
Reviewed-on: https://code.wireshark.org/review/30776
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Registration definitions for built-in dissectors are internal to
libwireshark.
Change-Id: Icd7065731459848bd6aabe721ae1da6d2e7ced34
Reviewed-on: https://code.wireshark.org/review/30371
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Change-Id: I1f828df1735bd10ef8849d208e10ea1339ba37e2
Reviewed-on: https://code.wireshark.org/review/26403
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The new KNXnet/IP dissector replaces the old KNXnet/IP dissector.
The new KNXnet/IP dissector supports the new KNX features
- A_MemoryExtended services
- A_PropertyExt services
- KNX Data Security
- KNXnet/IP Core V2
- KNXnet/IP Device Management V2
- KNXnet/IP Tunneling V2
- KNXnet/IP Routing V2
- KNXnet/IP Security
Change-Id: I3d1d716ef03d16d2720e6a1fcb23c2243d1cd956
Reviewed-on: https://code.wireshark.org/review/29155
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Roland Knall <rknall@gmail.com>
Specified in RFC2986
PEM header from RFC 7468
MIME type and .p10 file extension from RFC 5967
.csr file extension from common practice
Change-Id: I7dfe0a19b70eaf3352af2463759a342277d53db6
Reviewed-on: https://code.wireshark.org/review/29994
Reviewed-by: Anders Broman <a.broman58@gmail.com>
OIDs used in Trusted Computing Group X.509 Certificate Profiles are available in
https://www.trustedcomputinggroup.org/wp-content/uploads/Credential_Profile_EK_V2.0_R14_published.pdf
Example Certificates in PEM format are in Appendix A.
The relevant TCG OIDs are mostly used in certificate extensions like:
- subjectAltName
- extKeyUsage
- subjectDirectoryAttributes
Change-Id: Ifd44f598bea0b32b4471dfec2fd3af74f7a9e33e
Reviewed-on: https://code.wireshark.org/review/29983
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Rename packet-ssl{,-utils}.[ch] to packet-tls{,-utils}.[ch].
Change-Id: I4732162ec131ddf0734b3dd191ccc9e48a76ce06
Reviewed-on: https://code.wireshark.org/review/29659
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
packet-mpeg-pmt.h is included only by DVB-CI. All it contains is
the definition of a value string for stream types in the ca_pmt.
Move the definition into packet-dvbci.c and remove the include file.
Change-Id: I7d63e49804c936284f6a9c5218e0fd9b4fa469a6
Reviewed-on: https://code.wireshark.org/review/29813
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
packet-gnutella.h doesn't export any functions and nothing appears to
depend on it. Pull its contents into packet-gnutella.c.
Change-Id: I9bab0bfed87af3ac520fb8d8daa89d3fa3dc6f17
Reviewed-on: https://code.wireshark.org/review/29785
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move the contents of packet-clearcase.h, packet-fcp.h, packet-klm.h,
packet-rquota.h, packet-rwall.h, and packet-spray.h to their respective
.c files. packet-pktc.h didn't contain anything so just remove it.
Change-Id: I019db0cb14bf527c5d73c6d18bee922dd822bc43
Reviewed-on: https://code.wireshark.org/review/29787
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the ability to specify maximum function counts for each group to
checkAPIs. Add maximum counts for the "termoutput" and "abort" groups
where needed. Show summaries in various checkAPI targets.
Switch uses of ws_g_warning back to plain g_warning.
Change-Id: I5cbddc8c671729e424eed8551f69116d16491976
Reviewed-on: https://code.wireshark.org/review/29721
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
As ED-137 code is about 50% of RTP dissector, I decided to move it to different file.
Change-Id: I690e0292255dd84bc503fbd6ba86f39767f2bd6d
Reviewed-on: https://code.wireshark.org/review/29355
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a file parser and dissector that can handle the output of
`journalctl -o export`. From here we can add a systemd journal extcap
and possibly support for the JSON and binary formats.
Change-Id: I01576959b2c347ce7ac9aa57cdb5c119c81d61e9
Reviewed-on: https://code.wireshark.org/review/29311
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Initial dissection support for the WireGuard Protocol.
Decryption support will follow later.
Bug: 15011
Change-Id: Iaf7d901501e02299714c3f0e7daa56a8437d01de
Reviewed-on: https://code.wireshark.org/review/28985
Reviewed-by: Anders Broman <a.broman58@gmail.com>
These messages are defined in [0], and are used in some deployed
products already.
[0] https://tools.ietf.org/html/draft-kouvelas-lisp-map-server-reliable-transport-04
Change-Id: Idfbc777175c1596d3e0fa1df39602a68ee1c488f
Signed-off-by: Lorand Jakab <ljakab@ac.upc.edu>
Reviewed-on: https://code.wireshark.org/review/28503
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Have the Wiretap code just do a heuristic test to see if the file looks
like a RFC 7468 file and just had the entire blob of raw file data to
the caller, with an encapsulation type of WTAP_ENCAP_RFC7468.
Have a file-rfc7468.c dissector that processes the lines of the file,
displaying all of them. Have it extract the label from the
pre-encapsulation boundary line, and, after it's decoded the
base64-encoded data lines into a blob of data, try handing the tvbuff
with the blob to dissectors that have registered in the
"pem.preeb_label" dissector table with the appropriate label value, and
hand it to the raw BER dissector only if that fails.
This allows some files to have the content dissected as more than just a
raw blob of BER-encoded data.
Change-Id: I98db9f0beb86e5694fb8e886005a2df4fc96ba71
Reviewed-on: https://code.wireshark.org/review/28914
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Having these build tools in machine code poses problems when cross-compiling.
The most significant being that we need to find the host and build GLiB
dependencies at compile-time.
There is no noticeable speed difference between the Python and C implementation.
Ping-Bug: 14622
Change-Id: Id13f823c7f4abf51edfa291e703028873748989f
Reviewed-on: https://code.wireshark.org/review/28130
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>