Wireshark.nsi requires SMI_DIR to point to the base of the SMI directory
but FindSMI.cmake doesn't set it. Set it in the main CMakeLists.txt
Change-Id: Id667341273d6abb0d2d64ef91cc62d1ce3f42a83
Reviewed-on: https://code.wireshark.org/review/9499
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Change-Id: I0edc3909516452e6497a050b4617f9aafcea2688
Reviewed-on: https://code.wireshark.org/review/9112
Reviewed-by: Michael Mann <mmann78@netscape.net>
A few sample tap/dissectors (ANSI/A, ANSI MAP) are also included to test the API. The "GUI output" is a bit raw and could use some "prettying up", but all the basic hooks are there.
Telephony "stat grouping" needs to be better alphabetized to properly populate menu (on GTK, probably Qt)
Change-Id: I98514171f69c4ab3a304dccb26c71d629703c9ab
Reviewed-on: https://code.wireshark.org/review/9110
Reviewed-by: Michael Mann <mmann78@netscape.net>
This got missed in the initial refactoring.
Change-Id: I98dcc0816e065efab9b497f753c8d2d388349ff3
Reviewed-on: https://code.wireshark.org/review/9044
Reviewed-by: Michael Mann <mmann78@netscape.net>
Very similar to the refactoring of SRT stats, it provides more commonality of the stats for all GUI interfaces. Currently implemented for TShark and GTK. Affected dissectors: MEGACO, MGCP, Radius
Change-Id: Icb73a7e603dc3502b39bf696227fcaae37d4ed21
Reviewed-on: https://code.wireshark.org/review/8998
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Create "common" SRT tap data collection intended for all GUIs. Refactor/merge functionality of existing dissectors that have SRT support (AFP, DCERPC, Diameter, FC, GTP, LDAP, NCP, RPC, SCIS, SMB, and SMB2) for both TShark and GTK.
SMB and DCERPC "tap packet filtering" were different between TShark and GTK, so I went with GTK filter logic.
CAMEL "tap packet filtering" was different between TShark and GTK, so GTK filtering logic was pushed to the dissector and the TShark tap was left alone.
Change-Id: I7d6eaad0673fe628ef337f9165d7ed94f4a5e1cc
Reviewed-on: https://code.wireshark.org/review/8894
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Set the CMake policy for CMP0042 to old
Change-Id: I2b71e1d8d9b9b90ede11df1a7874a2360c3032c5
Reviewed-on: https://code.wireshark.org/review/8740
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for the locally modified version of zlib to suppress
a CMake warning and disable building of the zlib examples.
Change-Id: I9ae08b49d149951e8626d506f69f1757a1ec7e23
Reviewed-on: https://code.wireshark.org/review/8706
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Rename a local CMake variable to prevent CMP0054 warnings in
CheckTypeSize and CheckStructHasMember modules.
Change-Id: Ida0df954c81333ad37455db90e0d72ca9df8c6f1
Reviewed-on: https://code.wireshark.org/review/8522
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Make the gitversion target depend on version.h instead of running
make-version.pl separately. Make wsutil and qtui depend on gitversion.
Change-Id: I32f25347c12c7f86b2439ed4bf517cc8f5fb106f
Reviewed-on: https://code.wireshark.org/review/8299
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: Iab2559c2bac5550987c108c6e917506fcec525e9
Reviewed-on: https://code.wireshark.org/review/8221
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
An undefined or invalid PROCESSOR_ARCHITECTURE will produce an invalid
wireshark.exe.manifest. Make sure it's always set.
Change-Id: I1b33f7bd5e964f05344919d1f11d88c14104c0ce
Reviewed-on: https://code.wireshark.org/review/8253
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Allow the wireshark libs directory to be defined by WIRESHARK_LIB_DIR.
Ensure either WIRESHARK_LIB_DIR or WIRESHARK_BASE_DIR is defined.
Ensure the compiler is a supported version (VS2010, 12 or 13).
Change-Id: I0abd371c5773c08ca255abe308d1a59e2e290a02
Reviewed-on: https://code.wireshark.org/review/8247
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Set the minimum version for Windows to 3.1.3
Set the policy for CMP0054 to squelch a few warnings.
Change-Id: I7647a0e5dce83db2cd87d7b8048c808e10863c7e
Reviewed-on: https://code.wireshark.org/review/8241
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
This is a "refactoring part 1" of the srt stats. This first step is using the service_response_time_table for all (possible) TShark srt stats. Next step will be combining the GTK and TShark service_response_time_table, so there is more code reuse and the "shared structure names" between GTK and TShark service_response_time_table won't seem as bad.
Maybe it can even go one step farther and handle a dynamic number of columns so this refactoring can apply to all srt stats.
Change-Id: Ief28e7e55f7dbbf4f2d9bb6f1a1592b87b866137
Reviewed-on: https://code.wireshark.org/review/8210
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I66247132f00c83f35cf78cb63ea00a5ce923fddb
Reviewed-on: https://code.wireshark.org/review/8211
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 9363
Change-Id: Ic64716ef0156607ca40773cef8e76fc4a0825b3c
Reviewed-on: https://code.wireshark.org/review/8196
Reviewed-by: Michael Mann <mmann78@netscape.net>
Standardise the args to win-setup.ps1
Change-Id: Ibd9d7bb338edb1cef444abc37a7b103eec38fb09
Reviewed-on: https://code.wireshark.org/review/8173
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Changed path from "share" to one based on plugns path
For example /usr/local/lib/wireshark/extcap
Change-Id: I8f4a9f274b1cec897ed45de9e05679ac3f230301
Reviewed-on: https://code.wireshark.org/review/8161
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Tested-by: Balint Reczey <balint@balintreczey.hu>
Fix up generation messages for Windows build
Remove some superfluous Lua messages
Change-Id: I405e7edfcb043fc842fe4f0cca8d23d5755527f9
Reviewed-on: https://code.wireshark.org/review/8138
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Make sure the target location for extcap executables and extcap_dir
match on OS X.
Set the extcap directory to Contents/MacOS/extcap. The Mac Developer
Library documentation doesn't explicitly define "Resources", but
examples include data files and not executables. It does state that
executables shouldn't go into PlugIns.
Make sure we rpathify androiddump.
Change-Id: If36c762e2a1991c26e5c01a870deaf191bcf9f94
Reviewed-on: https://code.wireshark.org/review/8093
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Newer versions of CMake generate warnings about the use of
@variable@ references, replace @CPACK_PACKAGE_NAME@ with
${CPACK_PACKAGE_NAME}
Set the policy for CMP0026 to be old to squelch warnings about the
use of target LOCATION
Change-Id: I424083260c51875dde80f98a23d6528c31ff0aec
Reviewed-on: https://code.wireshark.org/review/7977
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
androiddump should be put in extcat directory.
Change-Id: I360eef2d5a68178c73181949b0fe3346585f5190
Reviewed-on: https://code.wireshark.org/review/8083
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Try not to overwrite gspawn*.exe between signing them and packaging
them. (Second try.)
Change-Id: I717f5fca6dc6afbc146927d06e6f74ae6a0a87c8
Reviewed-on: https://code.wireshark.org/review/8082
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This accidentally reverted code from g40ce324. Will try again shortly.
This reverts commit 8d9fdda991.
Change-Id: I0bf7f351b926f1ce4b0c9e19fe0367add1dfee1e
Reviewed-on: https://code.wireshark.org/review/8081
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Try not to overwrite gspawn*.exe between signing them and packaging them.
Change-Id: I9f224b64537c3b0dd6f7f8b94a8837bd427ad2ca
Reviewed-on: https://code.wireshark.org/review/8080
Reviewed-by: Gerald Combs <gerald@wireshark.org>
On Windows, prepend the main program directory to %Path% when spawning
extcap processes. This lets us place androiddump in extcap while allowing
it to locate its DLLs.
Change-Id: I406c47ce71323266d5f14fb596931398464e452d
Reviewed-on: https://code.wireshark.org/review/8057
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add win-setup.ps1, which duplicates the following tasks performed by
config.nmake + Makefile.nmake + win-setup.sh:
- Create the windows library directory.
- Download files.
- Download and unpack zip files.
- Check and set current-tag.txt
Don't verify applications or libraries. CMakeLists.txt does that.
Update the Developer's Guide.
Have POWERSHELL_COMMAND use dot sourcing instead of "-File", which
appears to be a synonym for "-IgnoreTheExitStatusReturnedByThisScript".
This removes our dependencies on unzip and wget and reduces our dependency
on bash.
Change-Id: Ia9def24acbe183d81b9d477fa42e655e4a3a6614
Reviewed-on: https://code.wireshark.org/review/7990
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The Visual Studio solution files created by CMake list "Debug" as the
first configuration, which means that we end up with zlibd1.dll by
default. Many of the OpenSUSE DLLs depend on zlib1.dll. Add the OBS
version in that case.
Change-Id: Ia98490f1a192802d1482e0749bbd2b550e916bc5
Reviewed-on: https://code.wireshark.org/review/8051
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add missing androiddump stuff like:
- release notes
- documentation
- Windows nmake support
- running androiddump as a windows application instead of console on Windows
- addition of androiddump to the Windows installer
Change-Id: I3bc6cc70e4dc96c0cd776f3d965dd2aa0309995d
Reviewed-on: https://code.wireshark.org/review/7981
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
If we're building on Windows and %Platform% is "x64" or undefined,
check it against our generator's target platform.
Update the "${CMAKE_GENERATOR} MATCHES" regexes to match what CMake
uses internally.
Change-Id: I33996344978855cbdf7c1ee9e55b7340efea5b5c
Reviewed-on: https://code.wireshark.org/review/7994
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
The change to zlib 1.28 requires the variable BUILD_SHARED_LIBS
to be set and true to build the correct zlib dll on Windows.
Change-Id: I0f46b832726834a4e99d7d7d0637112da9c0c531
Reviewed-on: https://code.wireshark.org/review/7982
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
androiddump is extcap program that can be used with Android devices
(need Android SDK in system PATH). Supported is Logcat/Logger logs and
Bluetooth interfaces for all Android to this day (Lollipop).
Please note that it will work also for FirefoxOS.
Interfaces:
1. Logcat Main (binary or text)
2. Logcat System (binary or text)
3. Logcat Events (binary or text)
4. Logcat Radio (binary or text)
5. Logcat Crash (text; Lollipop)
6. Bluetooth Hcidump (<Kitkat)
7. Bluetooth Bluedroid External Parser (Kitkat)
8. Bluetooth BtsnoopNet (Lollipop)
Change-Id: I26e4cd1a37a6af805f8b932399b4aa44ee7b5a80
Reviewed-on: https://code.wireshark.org/review/7475
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Modify CMake to compile zlib, removing need for an nmake compilation
of zlib before running CMake.
Change-Id: I63cead55b14d6a2e22b1b6a8536eaf9260e21231
Reviewed-on: https://code.wireshark.org/review/7864
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Removed the redundant setpath batch file and associated macro
and updated docs.
Change-Id: I5ddab6bad2d14ed3443194d7269f1890e4aa608e
Reviewed-on: https://code.wireshark.org/review/7826
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Add FOLDER properties to targets to tidy up the VS solution
Change-Id: Ia42e0e89fb490cd3dcd33b7c5f59eb0a27b74c7a
Reviewed-on: https://code.wireshark.org/review/7822
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
A recent commit broke compilation with Python 3. The original author of
html2text.py is deceased and the fork has increased the number of files
for this "simple" helper.
The html2text.py script in this patch was rewritten and its output
matches with lynx (except for a few newlines around lists). This means
that indentation has been added for headings, paragraphs and lists.
Also, since it was written from scratch, a new license could be chosen
that matches Wireshark.
Since now the in-tree html2text.py script provides nicer output, remove
detection of the alternative programs (elinks, links). lynx/w3m is
somehow still necessary for asciidoc though.
(I also looked into reusing html2text.py for the release notes to
replace asciidoc, but the --format=html output produces different output
(HTML adds a ToC and section numbers). For now still require lynx for
release notes)
Tested with Python 2.6.6, 2.7.9, 3.2.6 and 3.4.3 under LC_ALL=C and
LC_ALL=en_US.UTF-8 on Linux. Tested reading from stdin and file, writing
to file, pipe and tty. Tested with cmake (Ninja) and autotools on Arch
Linux x86_64. Test:
# For each $PATH per python version, execute (with varying LC_ALL)
help/faq.py -b | tools/html2text.py /dev/stdin | md5sum
help/faq.py -b | tools/html2text.py | md5sum
help/faq.py -b | tools/html2text.py
help/faq.py -b | tools/html2text.py >/dev/null
Change-Id: I6409450a3e6c8b010ca082251f9db7358b0cc2fd
Reviewed-on: https://code.wireshark.org/review/7779
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Graham Bloice