A vlans file in the personal preference directory add an option to resolve
VLAN IDs to a describing name.
Format of vlan file is
123\tName of VLAN
To enable the resolving the preference nameres.vlan_name must be set
to TRUE.
Bug: 11209
Change-Id: I3f00b4897aace89c03c57b68b6c4b6c8b7d4685a
Reviewed-on: https://code.wireshark.org/review/14471
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
If we aren't changing the resolved name, it's not new.
This prevents us from perpetually "resolving" the address. If we have
ARP packets that cause us to map a MAC address to a host name, based on
the ARP packet saying the MAC address corresponds to a given resolved IP
address, then each time we dissect the packet, the address will be
"resolved" - and each time we have new resolved addresses as a result of
that, we'll redissect the displayed packets so that they show the
resolved address, and we'll forever be redissecting.
Change-Id: I445e92f407d52a4ed5986721ffcc472f86e99431
Reviewed-on: https://code.wireshark.org/review/14236
Reviewed-by: Guy Harris <guy@alum.mit.edu>
No need for platform-specific system header boilerplate.
Change-Id: I5387a0005ddb0d7aab3c5b9f28d6282053c1b0fd
Reviewed-on: https://code.wireshark.org/review/13865
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Have a flag for addresses indicating whether the address is resolved to
a name or whether its "name" is just a printable version of the address.
If the name corresponding to an IP address isn't really a name, don't
assign it to a MAC address.
Clean up some code a bit (have a fill_dummy_ip6() corresponding to
fill_dummy_ip4()).
Bug: 10212
Change-Id: I9d0ffa2706be17842f832c64cea7acc5c1dc6536
Reviewed-on: https://code.wireshark.org/review/13412
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I8512cfa1d424f82a873a0e0e1d22c7b075fdd7f3
Reviewed-on: https://code.wireshark.org/review/13069
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
By analogy to ipv4.h.
Change-Id: I147565b332024b1bb88e9cd15889255773d04524
Reviewed-on: https://code.wireshark.org/review/13034
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's an ancient obsolete option with a confusing name.
Change-Id: Ib10330cf859cdea18fed2077c6539e56350ef380
Reviewed-on: https://code.wireshark.org/review/11967
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Have wsutil/file_util.h include them on UN*X, just as it includes io.h
on Windows, so we can have a rule of "if you do file operations, include
<wsutil/file_util.h> and use the routines in it".
Remove includes of unistd.h, fcntl.h, and sys/stat.h that aren't
necessary (whether because of the addition of them to wsutil/file_util.h
or because they weren't needed in the first place).
Change-Id: Ie241dd74deff284e39a5f690a297dbb6e1dc485f
Reviewed-on: https://code.wireshark.org/review/11619
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Move the definitions of hashipv4_t and hashipv6_t to wiretap/wtap.h, as
that's the main place they're used. Change them a bit not to depend on
other stuff from libwireshark, and change the code as required by those
changes.
This should fix the Solaris build; apparently, the Sun^WOracle compiler
is generating code for static inline functions even if they're never
called, so that libwiretap ends up including code that calls tvbuff and
wmem functions.
There's probably further cleanup that could be done here, but this
should at least fix the build, as well as getting rid of a dependency
between two libraries that are at least somewhat independent (libwiretap
should *not* depend on libwireshark, as some programs use libwiretap but
not libwireshark, and, ultimately, we probably want it to be possible to
use libwireshark without libwiretap but that'd be more work).
Change-Id: I91c745282f17d7c8bff7809aa277eab2b3cf47c1
Reviewed-on: https://code.wireshark.org/review/11537
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Replace CMP_ADDRESS, COPY_ADDRESS, et al with their lower-case
equivalents in the asn1 and epan directories.
Change-Id: I4043b0931d4353d60cffbd829e30269eb8d08cf4
Reviewed-on: https://code.wireshark.org/review/11200
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Platform file '/etc/services' is the same as Wireshark's
'/usr/share/wireshark/services', only Wireshark's is more recent
(on my system, same goes for other platforms I assume).
Use only Wireshark's IANA services files.
Other benefits would be removing some platform specific #ifdefs and making
service names more consistent.
Also respect user services settings by parsing $PERSCONFIG_DIR/services
after $SYSCONFIG_DIR/services.
Change-Id: I9890473af92763e02dabd2386eaa767aed2f2899
Reviewed-on: https://code.wireshark.org/review/10941
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Don't display duplicate ports if transport name resolution is not
enabled (for UDP/TCP/DCCP).
Also introduce col_append_port() to handle info column port display
with name resolution in a uniform format.
Change-Id: Icb8ac45f726b7c539b4534c62061473e9b582753
Reviewed-on: https://code.wireshark.org/review/10804
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Avoid displaying duplicate port numbers with transport name resolution disabled and
make some dissector code simpler.
Introduces port_with_resolution_to_str_buf() function and amends UDP/TCP/DCCP/SCTP to
use the new field display type.
Change-Id: Ifb97810b9c669ccbb1a310a2c0ffd6e2b63af210
Reviewed-on: https://code.wireshark.org/review/10625
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Move the boolean flag for using captured DNS packet info for name resolution
to the Name Resolution preferences settings, as it was rather surprising to
disable Name Resolution preferences and still have names being resolved. Also
disble them all if the '-n' command line switch is used, and re-enable it for
a 'd' character in the '-N' option.
Bug: 10337
Change-Id: Ie4d47bab0100db3360cc447cd3e446b2e39aa917
Reviewed-on: https://code.wireshark.org/review/9786
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Have address_to_name() be a routine that takes an address and returns a
string with a "sufficiently long" lifetime for use in columns, using the
address type's addr_name_res_str routine for most address types, rather
than having a too-small set of address types wired into it. It replaces
both the internal solve_address_to_name() routine and get_addr_name(),
and can, for example, handle the special WLAN address types rather than
leaving them unresolved even with an ethers file.
Change-Id: Id09bc412adf5d2752155650a14a77c5378af2e42
Reviewed-on: https://code.wireshark.org/review/9475
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The scope that is passed in should only be used for the return value - other
temporary buffers we must alloc/free ourselves, since if the scope is NULL they
will not be managed automatically.
Bug: 11293
Change-Id: I27be856f1c5cdf47f78e766192a29523664a543e
Reviewed-on: https://code.wireshark.org/review/9007
Reviewed-by: Evan Huus <eapache@gmail.com>
Petri-Dish: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
It was added (presumably by accident) in 41ac67c.
Change-Id: If9c2daae6d9f6a0f09fc04c5332faeaa69d355c2
Reviewed-on: https://code.wireshark.org/review/8855
Reviewed-by: Evan Huus <eapache@gmail.com>
the list.
The patch ensures that non-duplicate subnets are appended to the end of the
list rather than as the second element, which if there had been a second
element previously, the memory for it was effectively leaked.
It also allows /32 "subnets", even though arguably the hosts file should be
used instead, but now the test in read_subnets_file() matches the assert in
subnet_entry_set().
Bug: 11247
Change-Id: I54bf1cbb34edfcf410aa634043a377c27091df51
Reviewed-on: https://code.wireshark.org/review/8802
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In the Qt UI redrawing the packet list redissects our visible packets,
which might call add_ipv{4,6}_name, which sets new_resolved_objects =
TRUE, which emits the addressResolutionChanged signal, which redraws the
packet list, which ...
Break out of the loop by checking to see if we've already cached an IPv4
or IPv6 hostname.
Change-Id: Icb2841e3453fb98d4cf0ea06a0f49737e2b8f25e
Reviewed-on: https://code.wireshark.org/review/7738
Reviewed-by: Gerald Combs <gerald@wireshark.org>
configure if we can't find any name resolver (autotools only).
This puts back the gethostbyname()/gethostbyname2() code removed in
I3348179626e97daaddfbc89e3ed21e39915e3de4 and
If59ce8a038776eadd6cd1794ed0e2dad8bf8a22c but as a last-resort option (only
if we don't have a better or more modern name resolver).
As suggested/requested by Guy in https://code.wireshark.org/review/#/c/7423/
Change-Id: I706dbbd65135f47c67d3d8d88a61ad7273914c47
Reviewed-on: https://code.wireshark.org/review/7447
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
This is mostly to reduce tvb_get_ptr calls that were used to pass into get_ether_name.
Some optimizations were made to packet-ieee80211.c in the process of conversion.
Change-Id: I81d3c65d4c09a15237fc287c2e989eb6e6936b1f
Reviewed-on: https://code.wireshark.org/review/7492
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We only store the last name added (i.e., the last alias) which is the
opposite of what the name resolver does (it returns the first name in the
hosts file).
Just comment the code out for now with a comment explaining why. Maybe some
day we'll have a reason to store the aliases.
Change-Id: I560ac05868a429d31e9d41f3a34af36c4fca1f6c
Reviewed-on: https://code.wireshark.org/review/7466
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Also fix up some formatting.
Change-Id: I3348179626e97daaddfbc89e3ed21e39915e3de4
Reviewed-on: https://code.wireshark.org/review/7423
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
These gethostbyaddr() calls should be changed to getaddrinfo() but only in
master.
Change-Id: I7e2d31ceb0e072beb7f324336d7b145c3adbe3a0
Reviewed-on: https://code.wireshark.org/review/7402
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
One spot was missing the check.
Change-Id: I72d1d3d2dec2cc71b02861ace59dc9e189721cfb
Reviewed-on: https://code.wireshark.org/review/7401
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Add address_with_resolution_to_str API that returns address string + name resolution in the format %s (%s), first string is resolved name (if available) and second string is raw address string.
Convert AT_FCWWN to using proper name resolution format
First use of address_with_resolution_to_str with field types in proto.c
Change-Id: I2ae77c29a4ffc30bb919fbec00f06629830898c2
Reviewed-on: https://code.wireshark.org/review/7196
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I0913337a29efac5c39e30897cad7e90195fa984a
Reviewed-on: https://code.wireshark.org/review/7198
Reviewed-by: Michael Mann <mmann78@netscape.net>
Model get_manuf_name after get_ether_name so that a string (either name resolved or colon-separated bytes) is always stored in a hash table. This will make name resolution of addresses perform a little better because it doesn't have to worry about the wmem_allocator.
Change-Id: If976fe7b0c3f9cd053225096c2ac05418f061af6
Reviewed-on: https://code.wireshark.org/review/7081
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
One use in a GUI function isn't really enough to justify making the structure public.
Change-Id: Ic7dee275ba0a2bd4e19c06702a867417c5624c27
Reviewed-on: https://code.wireshark.org/review/7080
Reviewed-by: Michael Mann <mmann78@netscape.net>
Model get_manuf_name after get_ether_name so that a string (either name resolved or colon-separated bytes) is always stored in a hash table. This will make name resolution of addresses perform a little better because it doesn't have to work about the wmem_allocator.
Change-Id: I80f465ae0845290255a659ab63310ac3cc35506e
Reviewed-on: https://code.wireshark.org/review/7075
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
One use in a GUI function isn't really enough to justify making the structure public.
Change-Id: I6d70b9bacbc0fa1898150f59c0c69779a6cd5d51
Reviewed-on: https://code.wireshark.org/review/7074
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This allows for even more cleanup with respect to how address types are handled, including removing address_to_str.c. Most of the functionality was folded into address_types.c, but the remainder was just dispersed because it didn't make sense to keep the file.
Change-Id: Id4e9391f0c3c26eff8c27b362e4f7a1970d718b4
Reviewed-on: https://code.wireshark.org/review/7038
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
They've been deprecated for a very long time. Replace them with
getaddrinfo. Note that we might not want to do synchronous name
resolution at all.
Add HAVE_GETADDRINFO to the KfW win-mac.h collision list.
Change-Id: If59ce8a038776eadd6cd1794ed0e2dad8bf8a22c
Reviewed-on: https://code.wireshark.org/review/6958
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
*_port_to_display functions take an allocator scope, so the memory they return
must be allocated from that scope, which means we must strdup the result of
serv_name_lookup.
Bug: 10901
Change-Id: I337c8b6f9dfece966964c09023679b3e24648e48
Reviewed-on: https://code.wireshark.org/review/6842
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Evan Huus <eapache@gmail.com>
Get rid of references to ep_ and se_ allocation in code that now uses
wmem allocation instead.
Fix API documentation of conversation_table.h routines to reflect that
as well - some APIs changed to pass wmem scopes.
Also, zbee_sec_key_hash() now takes the output buffer as an argument and
just returns it, and nobody actually uses the return value, so change it
to return void.
Change-Id: Ife1ec675a9322fd0f0be306a9d639ec17aad1c7a
Reviewed-on: https://code.wireshark.org/review/6636
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is the last remaining use of se_ memory APIs.
Change-Id: Ic0508a830bc5460bc743d21eb33ffdd7f4ce2eb5
Reviewed-on: https://code.wireshark.org/review/6574
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I973c672e9d573ad67e9b9fd82a5610aaf8a74efa
Reviewed-on: https://code.wireshark.org/review/6605
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Uli Heilmeier