file to which to write the capture; if it's NULL, create a temporary
file and use that.
Have "-w" set a local variable, which starts out null, and, for "-k"
captures, call "do_capture()" and pass it that local variable as an
argument; this lets you do "-k" without "-w", which makes it use a
temporary file for the capture.
This means "run_capture()" no longer serves a useful purpose, as its
only caller is "do_capture()"; swallow it into "do_capture()".
svn path=/trunk/; revision=748
capture is done; make it do so, and don't bother passing it a "-Q" flag
to tell it to do so.
"capture()" is called in two places; in one place, it's in a child
process, and it shouldn't read in the capture file. Move the reading of
the capture file out of "capture()" itself to the place where we
*should* read in the capture file after it returns. Also, have it
return an indication of whether it succeeded or failed, so we know
whether we should read in the capture file.
svn path=/trunk/; revision=747
"quit_after_cap", and "capture_child" from "gtk/main.c" to "capture.c",
so that the definitions don't have to be duplicated in "main.c" for
other UIs if, as, and when we do versions of Ethereal with other UIs.
svn path=/trunk/; revision=746
process for a sync mode or fork mode capture.
Have that flag control whether we do things that *only* the parent or
*only* the child should do, rather than basing it solely on the setting
of "sync_mode" or "fork_mode" (or, in the case of stuff done in the
child process either in sync mode or fork mode, rather than basing it on
the setting of those flags at all).
Split "do_capture()" into a "run_capture()" routine that starts a
capture (possibly by forking off and execing a child process, if we're
supposed to do sync mode or fork mode captures), and that assumes the
file to which the capture is to write has already been opened and that
"cf.save_file_fd" is the file descriptor for that file, and a
"do_capture()" routine that creates a temporary file, getting an FD for
it, and calls "run_capture()".
Use "run_capture()", rather than "capture()", for "-k" captures, so that
it'll do the capture in a child process if "-S" or "-F" was specified
("do_capture()" won't do because "-k" captures should write to the file
specified by the "-w" flag, not some random temporary file).
For child process captures, however, just use "capture()" - the child
process shouldn't itself fork off a child if we're in sync or fork mode,
and should just write to the file whose file descriptor was specified by
the "-W" flag on the command line.
All this allows you to do "ethereal -S -w <file> -i <interface> -k" to
start a sync mode capture from the command line.
svn path=/trunk/; revision=740
popped up the top-level window (so that it looks like a capture
started from "Capture/Start");
initialized the colors (so that we don't dump core when reading
in the capture file);
popped up any message box for failure to read the preferences
file.
This means we start the capture in "main()", rather than in the realize
callback for the main window, so get rid of that callback.
If we're a child process that's just capturing to a file for our parent
to read, however, we shouldn't pop up the top-level window, because
that's our parent's job; when running that child, set its "argv[0]" to a
special name, so that
1) it shows up in a "ps" with a special name;
2) we don't have to invent Yet Another Flag to say "you're the
child".
(We may want to use the name to turn on *all* behaviors that the capture
child, and only the capture child, should exhibit.)
If "-w" and "-k" were both specified, attempt to open the file specified
by "-w" and, if that succeeds, set "cf.save_file_fd" to refer to it, so
that "-w" plus "-k" works again, rather than popping up a "The file to
which the capture would be saved ... could not be opened: Bad file
descriptor." message box.
svn path=/trunk/; revision=739
of the packet be printed (this is only done if "Print detail" is
selected; it should be grayed out of "Print summary" is selected).
If that item is selected, suppress the hex printing of uninterpreted
data items in the protocol tree.
Move some GTK+ keys not used outside of "gtk/print_dlg.c" from
"gtk/keys.h" into "gtk/print_dlg.c".
svn path=/trunk/; revision=736
- Capture->Start->"Active name resolution"
Allows the user to turn on/off name resolution
during a live capture.
- Display->Options->"Name resolution"
Turn on/off name resolution for the displayed
data (or during the -S mode).
E.g. clicking on a packet captured with
resolution disabled will resolve names in
the detailed list if this option is set.
And applying or resetting a display filter
allows the update of the packet list as well.
svn path=/trunk/; revision=726
current capture file if it's a temporary file, out of paranoia (so that
we don't get into a state where we have a capture file open but unlinked
- it's probably harmless to be in that state, as the file will remain
around until close, modulo NFS fun, and we may never be in that state
for very long, but I'd rather have it obviously stated in the code).
Remove the close in "capture()", and put one before the other call to
"capture()", in "main_realize_cb()" (is that call necessary, e.g. if you
pass "-r <filename>" *and* "-k", for some perverse reason, as
command-line arguments?).
If "cf.save_file" is non-null, free it before setting it, regardless of
whether it refers to a temporary file name or not.
svn path=/trunk/; revision=712
list of packets in real time" in the "Capture/Start" dialog box,
"ethereal -F" won't work - you get your choice of non-forked capture or
"-S".
Don't have "fork_mode" track "sync_mode"; instead, in those places where
we check for "fork_mode", check for "sync_mode" as well.
svn path=/trunk/; revision=711
and to fork off and run a separate copy of "ethereal" for "-S" and "-F"
captures or just call "capture()" otherwise, out of "gtk/capture_dlg.c"
and into a routine in "capture.c".
If the attempt to create said temporary capture file fails, pop up a
dialog box and don't do the capture.
Have the child capture process send a message upstream after it either
successfully starts the capture and syncs out the header of the capture
file, or fails to start the capture; the message indicates whether it
succeeded or failed, and, if it failed, includes a failure message.
This:
avoids the use of a signal, and thus means we don't have to
worry about whether to capture the signal, or whether to start
or stop capturing depending on whether this particular capture
is in sync mode or not;
lets us pop up the message box for the error in the parent
process if we're in sync mode, rather than doing it in the
child, which didn't work well.
Add a check button to the Capture/Start dialog box, so that we can
control, for each capture, whether it's to be done in sync mode or not.
svn path=/trunk/; revision=708
gzip. The zLib library is used for this purpose. If zLib is not available
(or it's use is disabled by the --disable-zlib option to configure), you
can still compile Ethereal but it will be unable to read compressed capture
files.
IMPORTANT:
Now all file accesses to capture files should be done through special macros.
Specifically, for any use of the following functions on capture files, replace them.
The arguments for the right-side functions are exactly the same as for the
original stdio functions.
fopen file_open
fdopen filed_open
fread file_read
fwrite file_write
fseek file_seek
fclose file_close
ferror file_error
svn path=/trunk/; revision=695
buttons insensitive if "Print summary" is selected, and make them
sensitive if "Print detail" is selected, as they apply only to the
"print detail" output.
svn path=/trunk/; revision=672
the "File/Print" dialog box; "Expand all levels" means that all levels
of the protocol tree should be printed, while "Print as displayed" means
that only those levels shown in the display should be printed.
Free the table of column widths once printing is done.
svn path=/trunk/; revision=671
prints the protocol tree, and summary prints the fields in the summary
clist, with a header line at the beginning of the printout.
Print only packets selected by the current packet filter.
Just have "ARP" and "RARP" in the "Protocol" field for ARP packets;
whether it's a request or a reply can be seen in the "Info" field.
Add to the "Frame" section of the protocol tree the time between the
current packet and the previous displayed packet, and the packet number.
Have FT_RELATIVE_TIME fields be a "struct timeval", and display them as
seconds and fractional seconds (we didn't have any fields of that type,
and that type of time fits the delta time above).
Add an FT_DOUBLE field type (although we don't yet have anything using
it).
svn path=/trunk/; revision=666
now in "gtk/capture_dlg.c" - so it doesn't need to include
<sys/sockio.h> on, for example, Solaris...
...but "gtk/capture_dlg.c" does need to include it.
"gtk/capture_dlg.c" also may need to include "snprintf.h", as it uses
"snprintf()".
svn path=/trunk/; revision=655
Move some defines that would be used even by a non-GTK+-based Ethereal
from "gtk/main.h" to "globals.h".
Remove the byte-order #defines from "packet.h", as they're now in
"globals.h" (having been moved there from "gtk/main.h").
Fix up some files that use those #defines to include "globals.h".
"resolv.c" doesn't use any GTK stuff, so it needn't include <gtk/gtk.h>
nor "gtk/main.h" - it only did so to get the byte-order #defines for the
benefit of "packet-ipv6.h", and "packet-ipv6.h" now includes them
itself.
svn path=/trunk/; revision=649
- that event happens if, say, you nuke the dialog box from a window
manager - and call "delete" routines for each of the preferences tabs,
so that, for preferences tabs that include list widgets, we can set a
flag on the preferences tab widget telling the selection callback for
the list widget that the buttons it would normally set the sensitivity
of, based on whether any row in the list is selected or not, have Joined
the Choir Invisible, and therefore that we shouldn't change their
sensitivity because GTK+ will whine at us if we do, just as is the case
if we press the "OK" or "Cancel" button (which also cause the window to
go away).
Can we just do this in the "window delete" handler? I.e., does that get
called if we explicitly destroy the widget? Or should we catch a
"destroy" event instead?
(There must be a better way to do this....)
svn path=/trunk/; revision=647
this causes "Makefile.in" to have two GPL notices - "Makefile.in" and
the "Makefile" generated from it are generated files, so maybe that's
OK).
svn path=/trunk/; revision=639
is pointed to by 'row_list_end', otherwise use 'g_list_nth()'" stuff
inside a macro.
Use that macro in place of an additional "g_list_nth()" call.
svn path=/trunk/; revision=603