Added support for Solaris IPNET layer
From me:
Some code cleanup in packet-ipnet.c
Added packet-ipnet.c to CMakeFiles.txt
Added WTAP_ENCAP_IPNET to encap_table_base[]
svn path=/trunk/; revision=31159
This patch adds protocol dissection support for the Assa Abloy R3 protocol.
R3 is an electronic lock management protocol for configuring operational
parameters, adding/removing/altering users, dumping log files, etc.
svn path=/trunk/; revision=31105
This is a patch for a new dissector that decodes Nokia Siemens Networks'
proprietary Flow Layer Internal Protocol (Ethertype 0x8901).
svn path=/trunk/; revision=31069
- packet-bacapp.h eliminated and included in packet-bacapp.c
- dissection of recipient-list and client-cov-increment added
svn path=/trunk/; revision=30955
NetPerfMeter is an Open Source TCP/UDP/SCTP/DCCP network performance metering
application for Linux, FreeBSD and MacOS X. It can be downloaded here:
http://www.exp-math.uni-essen.de/~dreibh/netperfmeter/ . The protocol used by
this application for the transport of control and data is called NetPerfMeter
protocol. The attached patch is a dissector to decode its packets.
svn path=/trunk/; revision=30943
This patch adds support for PacketBB (RFC 5444) to Wireshark.
PacketBB is a generic message format for mesh networks.
Both OLSR version 2 and DYMO will use packetbb.
svn path=/trunk/; revision=30942
I have built and tested a new Wireshark dissector which decodes a mirrored
packet that has an additional prepended UDP header attached to it. The packet
format was designed by Juniper Networks.
svn path=/trunk/; revision=30777
The attached patch adds a dissector for IPv6 over IEEE 802.15.4 (aka 6LoWPAN).
The protocol is specified in RFC 4944. This dissector also processes the
6LoWPAN draft header compression scheme in draft-ietf-6lowpan-hc-05.
svn path=/trunk/; revision=30268
This patch adds support to Wireshark for dissecting UDP packets used by
collectd's network plugin in order to transmit data from ones host to another
host (e.g. centralized storage of statistics while data is collectd on
individual systems)
The current dissector understands the part types supported by collectd-4.5
series and gracefully processes future part types (flagging them as unknown).
In regard to protocol errors or bad packets checks are based on the various
length fields used, parts are marked with warning when length is unexpected;
marked with error when length breaks minimal rules.
svn path=/trunk/; revision=29887
but (since the patch no longer applied cleanly) essentially manually
re-implemented by me:
Rename "stun" to "classic stun" and "stun2" to "stun", to follow the usage
defined in draft-ietf-behave-rfc3489bis-18 section 2.
svn path=/trunk/; revision=29884
Add a target ("x11-dissector") to build the X11 dissector.
Put the X11-related files (back) in the source distribution.
svn path=/trunk/; revision=29871
This patch adds extension support to the X11 dissector.
I've removed the perl script from the make file, since the new one depends on
perl 5.10, xcbproto (at least git as of today), and mesa (at least the
mesa/src/mesa/glapi directory). It seemed easier to just add the generated
header files to svn directly.
svn path=/trunk/; revision=29854
Add new protocol for 3GPP 29.414 (Nb interface RTP Mux).
- Don't use C++-style comments (comments beginning with "//")
- Don't declare variables in the middle of executable code; not all C
compilers support that.
- Dont register preferences when none present.
- Removed CHECK_COL
svn path=/trunk/; revision=29602
In that process, include the contents of packet-fmp_notify.h directly
in packet-fmp_notify.c - it wasn't used anywhere else.
svn path=/trunk/; revision=29512
Here is a patch against SVN that implements preliminary support for USB HID
devices. At the moment it only dissects the initial set up packets (which you
will see if you hotplug a keyboard or mouse.)
The patch also fixes a minor bug in the USB dissector code which reported
certain packets as malformed due to miscounting bytes, and it reports control
packet data and padding data in a more user-friendly manner.
svn path=/trunk/; revision=29256
Part 1:
Rename packet-gsm_abis_ip.c to packet-gsm_ipa.c.
Part 2:
Rename to the content to match the filename.
Part 3:
Add GSM A/SCCP support to the packet-gsm_ipa.c dissector
Adjusted patch to take laforge's comment into account. Use guint16 for the
length and use the ntohs routine to convert the length.
svn path=/trunk/; revision=29254
v5.2-User Adaptation Layer and V5.2 Interface.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3732
Me:
Removed check_col(), hf blurbs, removed global vars and regestering
SCTP port in packet-v52.c.
svn path=/trunk/; revision=29096
Within the attached diff file are two source files, packet-dtn.h and
packet-dtn.c. Their function is to decode Bundle Protocol PDUs sent using the
UDP or TCP Convergence Layers. These protocols have been released by the
Internet Research Task Force and are described in RFC 4838 and RFC 5050.
Detailed information on DTN can be obtained at www.dtnrg.org.
svn path=/trunk/; revision=29010
This patch protects against malformed Unique ID lengths (>= 252 bytes) and
defer all tvb_xxx related calls to when we actually need them. This allows us
to dissects as much as possible before bailing out (in case of a malformed
length).
From me:
Add a link to the protocol specification. Remove packet-miop.h along
with some struct definitions. (Don't tvb_memcpy over structs!) Remove
some more tvbuffs. Don't call proto_item_add_subtree if we're not going
to use the trees. Call proto_tree_add_item instead of
proto_tree_add_text Remove a bunch of unused ett_ variables. Add an
expert item for the protocol version. Register the field array with the
correct length.
svn path=/trunk/; revision=28963
The Bluetooth AMP Manager protocol was recently adopted by the Bluetooth SIG.
This protocol sits on top of L2CAP and requires a few changes in order to
accommodate the new move/create channel request.
This patch includes:
* a new Bluetooth AMP Manager Protocol dissector
* changes to L2CAP to handle the new move/create channel signals
* introduce a dissector table for fixed channel, allowing btamp dissector to
handle the BT AMP Manager Protocol channel
* Preliminary changes in L2CAP to support the new enhanced L2CAP modes
(enhanced retransmission/streaming mode)
svn path=/trunk/; revision=28819
Added support for Host Identity Protocol (HIP).
From me:
- Adjusted location of "Checksum" and "HIP Controls", as they seems to have
switched place in the bytes window
- Rewrote some proto_tree_add_uint -> proto_tree_add_item (some still remain)
- Rewrote to not use tvb_memcpy()
- Corrected some proto_tree_add_item's as the format seems to be big-endian
- Terminate ALL value_string's with { 0, NULL }
- No need to zero-terminate value_string strings.
- Removed call to check_col()
- Removed some prototypes
- Removed unused hf_hip_tlv_id, hf_hip_res and hf_hip_tlv_enc_iv (please check)
- Rewrote some C++ comments
svn path=/trunk/; revision=28596
Add support to read citrix netscaler capture file format.
From me:
- Renamed packet-ns.c to packet-nstrace.c
- Rewrote to not use "goto" in netscaler.c
- Moved dissecting of coreid
svn path=/trunk/; revision=28564
Add:
- FIX 4.0 to 4.4 fields, auto generated with XSLT stylesheets applied on
http://www.quickfixengine.org/ xml files (not included quickfixengine code is
BSD but xml files have no copyright).
- value_string functions for string keys, added to value_string.c.
- FIX desegmentation, it doesn't work well with malformed FIX PDU.
svn path=/trunk/; revision=28478