This can be used by dissectors that need to parse out-of-band
configuration.
Change-Id: I13c0a2f408fb5c21bad7ab3d7971e0fa8ed7d783
Reviewed-on: https://code.wireshark.org/review/20912
Reviewed-by: Roland Knall <rknall@gmail.com>
This makes sure that postdissectors that indicate that they need certain
fields in the first pass will get them.
While we're at it:
Fix the field-fetching code in TRANSUM not to assume it got any
instances of the field being fetched.
Rename process_packet_first_pass() in sharkd to process_packet(), as
it's the only routine in sharkd that processes packets.
Rename process_packet() in tshark and tfshark to
process_packet_single_pass(), as it's what's used if we're only doing
one-pass analysis.
Clean up comments and whitespace.
Change-Id: I3769af952c66f5ca4b68002ad6213858ab9cab9b
Reviewed-on: https://code.wireshark.org/review/21063
Reviewed-by: Guy Harris <guy@alum.mit.edu>
XXX_prime_with_YYY makes it a bit clearer than does XXX_prime_YYY that
we're not priming YYY, we're priming XXX *using* YYY.
Change-Id: I1686b8b5469bc0f0bd6db8551fb6301776a1b133
Reviewed-on: https://code.wireshark.org/review/21031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way, nothing using libwireshark needs to know what settings need to
be loaded, they just call epan_load_settings().
Change-Id: I9390e259e286fc4f5acaeaac2767e4c3c4b656af
Reviewed-on: https://code.wireshark.org/review/20983
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's identical in the GTK+ and Qt UIs, and it should just be done in
libwireshark.
Rename some routines to just speak of enabled_and_disabled_lists, so we
don't have to say enabled_and_disabled_protos_and_heuristic_dissectors
or something such as that.
Clean up indentation.
Change-Id: Ief2e612d9e1b60d8d0123b6bd3409dce5faf6495
Reviewed-on: https://code.wireshark.org/review/20970
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a "report a warning message" routine to the "report_err" code in
libwsutil, and rename files and routines appropriately, as they don't
only handle errors any more.
Have a routine read_enabled_and_disabled_protos() that reads all the
files that enable or disable protocols or heuristic dissectors, enables
and disables them based on the contents of those files, and reports
errors itself (as warnings) using the new "report a warning message"
routine. Fix that error reporting to report separately on the disabled
protocols, enabled protocols, and heuristic dissectors files.
Have a routine to set up the enabled and disabled protocols and
heuristic dissectors from the command-line arguments, so it's done the
same way in all programs.
If we try to enable or disable an unknown heuristic dissector via a
command-line argument, report an error.
Update a bunch of comments.
Update the name of disabled_protos_cleanup(), as it cleans up
information for disabled *and* enabled protocols and for heuristic
dissectors.
Support the command-line flags to enable and disable protocols and
heuristic dissectors in tfshark.
Change-Id: I9b8bd29947cccdf6dc34a0540b5509ef941391df
Reviewed-on: https://code.wireshark.org/review/20966
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: Ifaf25ca5a7974f1d398ceebbb4c6733d4d3e001a
Reviewed-on: https://code.wireshark.org/review/20006
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Removed all guards for HAVE_LIBGCRYPT, change autotools and CMake to
error out if it is not available. Update release notes, developer
documentation and README with the new status. Clarify relation with
GnuTLS in macosx-setup.sh. Install Libgcrypt via brew script.
Motivation for this change is that many dissectors depend on Libgcrypt
and having it optional increases the maintenance burden (there have been
several compile issues in the past due to the optional status).
Furthermore, wsutil has crypto code that can be replaced by Libgcrypt.
Change-Id: Idf0021b8c4cd5db70b8766f7dcc2a8b3acbf042f
Link: https://www.wireshark.org/lists/wireshark-dev/201702/msg00011.html
Reviewed-on: https://code.wireshark.org/review/20030
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Simplifies cleanup because wmem can handle the memory cleanup.
Change-Id: Idc6a9bfe5f23c83b59a5278a64b9fb706862342d
Reviewed-on: https://code.wireshark.org/review/20042
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This patch introduces the frame.interface_description field.
While testing this new functionality it became obvious that we have
a non-optimal interaction between the existing cfile.c's
cap_file_get_interface_name(), the recently added frame.interface_name
field and this new frame.interface_description field.
The string returned from cap_file_get_interface_name() may in fact
come from one of three different sources: the idb's interface name
(if it exists) or the idb's interface description (if that exists)
or a default text of "unknown". The string ultimately becomes the
rame.interface_name whether or not the idb had an interface name
option to begin with. This behavior does not allow one to test for
the simple presence of frame.interface_name. The new peer function
cap_file_get_interface_description() added by this patch returns
NULL instead of "unknown" if the idb does not have an interface
description. Should cap_file_get_interface_name() be similarly
modified to return NULL if the idb does not have an interface name?
Bug: 9781
Change-Id: Ie479f373c5080c004dd22bd88919838feca71e95
Reviewed-on: https://code.wireshark.org/review/19861
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I172167eb20793113562b69d1e0e93a4882200404
Reviewed-on: https://code.wireshark.org/review/20019
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Register all reassembly tables with a central unit, allowing the
central unit to have the callback that initializes and destroys
the reassembly tables, rather than have dissectors do it individually.
Change-Id: Ic92619c06fb5ba6f1c3012f613cae14982e101d4
Reviewed-on: https://code.wireshark.org/review/19834
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I9694a8e817e357061a60c425fb5881d525ed8143
Reviewed-on: https://code.wireshark.org/review/19695
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I7d585404463691946e2aa67e14e53edb813d9be8
Reviewed-on: https://code.wireshark.org/review/19681
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Change-Id: Icfe7de118bc49da57f537601c2f256e4a028b4e2
Reviewed-on: https://code.wireshark.org/review/19680
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I0275a6e0d5d151f086d96c6388b9fa647ea0085c
Reviewed-on: https://code.wireshark.org/review/19654
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Change-Id: If4c35d18db1dc982e981004838e0eabbf4479e78
Reviewed-on: https://code.wireshark.org/review/19653
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: Iafc9f1c4b2a0210d8098b37eefc095e740182258
Reviewed-on: https://code.wireshark.org/review/19648
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Libgcrypt prints all log messages to stderr by default. On Windows the
slow_gatherer routine logs
NOTE: you should run 'diskperf -y' to enable the disk statistics
if DeviceIoControl(..., IOCTL_DISK_PERFORMANCE, ...) fails. We don't
depend on cryptographically secure random numbers and the message is
needlessly confusing. Add a log handler that ignores less-severe messages.
Change-Id: If40a691ea380364457dfdf126b9bf33ac2672d3a
Reviewed-on: https://code.wireshark.org/review/19155
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
We do not use the STARTUP negotiation since a stream
can be captured in its middle but try to decompress
if the flag is present and fallback if it fails.
Change-Id: Iecbf49a45220b04be7808869c9884548eb1e7694
Signed-off-by: Benoît Canet <benoit@scylladb.com>
Reviewed-on: https://code.wireshark.org/review/17952
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
It allows to have more info on the version used (for ex 5.2.4 instead of 5.2)
Change-Id: I24a5b83f0a7a72fbb131e9ddc3e735ffea689ee6
Reviewed-on: https://code.wireshark.org/review/16977
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
1. Create ws_g_warning for legitimate uses of g_warning
2. Use proto_tree_add_debug_text
3. Comment some out
Change-Id: Ida044bf40286b955fdd529c4f9907c8e09b3d7c5
Reviewed-on: https://code.wireshark.org/review/16678
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The formatting of the address type is determined by a preference in
packet-mtp3.c, so just make MTP3 register the address type.
Use address_type_get_by_name in other dissectors (and export_pdu)
to use the address type.
Change-Id: Ifb32d7de27aeaa23cee8e803e25ffb3c905547b5
Reviewed-on: https://code.wireshark.org/review/15856
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Instead, prime the epan_dissect_t's tree to look for rtp.ssrc, and
extract that value with proto_get_finfo_ptr_array().
Also, have the filter used to check whether the packet is a candidate
for RTP analysis to check for RTPv2 (and add a check for IPv4 or IPv6
back to the Qt version), and get rid of an unnecessary extra level of
indirection for that string.
In the Qt version, if findStreams() set the error string, don't
overwrite it with a "No streams found." indication, and fix error
handling for the "filter didn't compile" case.
Change-Id: I09d0ea37ccd4806d99e3b6394f2a8a376e974705
Reviewed-on: https://code.wireshark.org/review/13045
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Capture dissectors could be architected like dissection dissectors, with tables and subtables and possibly using tvbs to pass there data instead of raw byte arrays. This is a first step towards that by refactoring capture_info_packet() to work off of a "capture dissector table"
Registering the capture dissection functions instead of calling them directly also clears up a bunch of dissector header files who sole purpose was providing the capture dissection function definition.
Change-Id: I10e9b79e061f32d2572f009823601d4f048d37aa
Reviewed-on: https://code.wireshark.org/review/12581
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
we can #include <wsutils/wsgcrypt.h> without doing the check ourselves
Change-Id: I248431bdb6cfa1bd85b794ec04ce1e4fcd3a7d2d
Reviewed-on: https://code.wireshark.org/review/11483
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Have epan_init() return a success/failure Boolean indication. Catch
exceptions when calling the dissector registration routines and, if we
get one, report the error and return a failure indication.
If epan_init() fails, quit, but first make sure the reported error is
displayed.
Change-Id: I0300cbb1f66a5644f857a205235124909d684c50
Reviewed-on: https://code.wireshark.org/review/11340
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I4ec48067e9ca2cbe88e1cf2e6c9dc1e382379221
Reviewed-on: https://code.wireshark.org/review/7767
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Iddd1200e62bf3200cb1a68408378dd9d47120b77
Reviewed-on: https://code.wireshark.org/review/6939
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
You can now add column with Custom type with more than one field
by using OR "||" splitter.
Bug: 9695
Change-Id: Ia82a91e7a35b867647d36cb9626e3870f46c0d85
Reviewed-on: https://code.wireshark.org/review/5804
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
That way, the code that constructs the runtime version string doesn't
itself have to call libpcap and libz, and could be usable in programs
that don't call them.
While we're at it, add "with" to the run-time version information for
GnuTLS and libgcrypt, to match the compile-time version information, and
add the version information from libwireshark to TShark.
Change-Id: I3726a027d032270b032292da9314c1cec535dcd2
Reviewed-on: https://code.wireshark.org/review/2587
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a dissector table indexed by the file type, and, for the
file-type-specific records, have the frame dissector skip the usual
pseudo-header processing, as the pseudo-header has a file-type-specific
record subtype in it, and call the dissector for that file type's
records.
Change-Id: Ibe97cf6340ffb0dabc08f355891bc346391b91f9
Reviewed-on: https://code.wireshark.org/review/1782
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Ahmad Fatoum