The COMPILE_OPTIONS source file property was introduced with CMake 3.11,
disable warnings via a target property instead (available since 2.8.12).
Disable some VS Code Analysis warnings. These flags seem to be accepted
since VS2015, so they can be added unconditionally.
Change-Id: Idfbf154caf8c1168f1f871a640a25b816a2cfab8
Fixes: v2.9.0rc0-2274-g7ce9081fdc ("lemon: sync with upstream (2018-09-08)")
Reviewed-on: https://code.wireshark.org/review/30298
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Changes:
- Drop the old basename modification that was present in the Wireshark
version of lemon.c. Use a new option available since 2018-04-20
("Add the -dDIRECTORY command-line option to LEMON.")
- Redo the static analyzer warning fixes, identifying the root causes
and adding assertions instead of hiding code with __clang_analyzer__.
- Ignore compiler warnings instead of adding config.h, _U_, extra const
keywords, unsigned/signed changes, etc.
- Remove lemon.html, it is out-of-date and external links are available.
In order to make future updates easier, document the exact steps that
were followed to create the lemon.c and lempar.c files. Future changes
SHOULD follow the same process.
My process to reach this updated lemon version:
1. Identify previous sync. Found v2.5.2rc0-147-g653af0f6d0 ("lemon: Sync
with latest trunk.") which seems based on sqlite commit 2b3d584ffe.
2. Check successive Wireshark patches. Identified many non-functional
changes to silence compiler warnings and static analyzer issues.
Found one feature (basename) that can be replaced with upstream -d.
3. Write minimal patches and document changes.
Upstream typos and coding style issues (other than trailing whitespace)
were deliberately not fixed to remain as close as possible to upstream.
Change-Id: I606f46dede86e34520f962a9e7163912392aad57
Reviewed-on: https://code.wireshark.org/review/30290
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Building without -DENABLE_ASAN=1 but with -fsanitize=address (as is done
by oss-fuzz) still triggers a memleak report. Closer inspection revealed
that two other members were leaked.
Change-Id: I3d022ac50c554891a73b9380b7879c1a60c3c798
Reviewed-on: https://code.wireshark.org/review/30289
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Using unregistered etts leads to an abort so check for them in checkAPIs.
This does slow down checkAPIs by about 15% but it seems a reasonable cost
for the benefit.
Note that finding ett registration blocks was fairly inaccurate so we
just check for whether ett variable addresses are used - on the assumption
that if someone's using the address they're probably using it to register
the ett.
Change-Id: Ifbac75c4a8a0fdb27d9c9d1584a2de791bfbc118
Reviewed-on: https://code.wireshark.org/review/30293
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The current fuzzshark target built by CMake is not usable for fuzzing.
Address this by adding a new ENABLE_FUZZER option that enables mandatory
instrumentation and libFuzzer linking options for the fuzzshark binary.
Create more CMake targets for specific fuzzing targets such as
fuzzshark_ip and fuzzshark_ip_proto-udp. These targets are not built by
default, either build individual targets or use the all-fuzzers target.
Now these binaries are not specific to oss-fuzz, so move them to a new
directory (perhaps the corpora can be added here in the future).
oss-fuzz build.sh is simplified and reuses the CMake targets.
When OSS_FUZZ is set, it will force static linking with external
libraries and limit parallel linker jobs (maybe not necessary for
Google's oss-fuzz builders, but my 8G/6c VM ran out of memory).
Change-Id: If3ba8f60ea1f5c3bd2131223050a81f9acbce05d
Reviewed-on: https://code.wireshark.org/review/30228
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The new pattern is from the Perl FAQ; it works better for me than the
old code. Of note is that it works with C++/C99-style comments
following a statement (as opposed to at the start of a line).
The new regex is only slightly slower than the old one: `make checkAPI`
goes from 3m30s of user time to 3m35s.
The big functional difference can be seen by looking at the
post-removal contents of packet-hl7.c.
Before:
struct msh { // typical/default values
char field_separator; //
char component_separator; //
char repetition_separator; //
char escape_character; // &\0\0MSH\0\0';
if (tree) {
(With the old regex we lost a lot of code!)
After:
struct msh {
char field_separator;
char component_separator;
char repetition_separator;
char escape_character;
char subcomponent_separator;
char message_type[4];
char trigger_event[4];
};
Change-Id: Iac35413d480cc7b05b820cb3b292f87ed30e6801
Reviewed-on: https://code.wireshark.org/review/30265
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
During review we might overlook issues with the commit messages. Some
commits somehow ended up IP addresses or local VM hostnames as author
address. Automate detecting such issues as well as other whitespace
issues with the commit message itself (detected by commit-msg).
Note: when installing as post-commit hook, it will also be executed when
doing things like 'git reset --hard'.
Change-Id: Ic638e7f51d89277ac359c04764effb69eb4f2fa1
Reviewed-on: https://code.wireshark.org/review/30225
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In the event that validation fails, the hard-coded temporary directory
would remain present. Use of a fixed hard-coded directory also prevents
concurrent runs.
Change-Id: I29f09dc004b1ab3578b4a9c51ea7e1a5b526159f
Reviewed-on: https://code.wireshark.org/review/30231
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
licensecheck.pl: by the time the second license is evaluated, the $2
variable was already invalidated. Fix that and make it possible for
checklicenses.py to check for multiple license choices.
Change-Id: I8e9e788c33ccd64e85839c82924e28a504f6ae8f
Reviewed-on: https://code.wireshark.org/review/30223
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Go for 2.37.6 for now; we may want to use a newer version.
Change-Id: Icce58716d5f7cb8367e7ff83cad070b2fcd7e1c2
Reviewed-on: https://code.wireshark.org/review/30213
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Check to see if xz supports threads and enable them if that's the case.
Change-Id: I8a0e7100fec98e5b7d7ccd9a987f7782bf7c7512
Reviewed-on: https://code.wireshark.org/review/30137
Reviewed-by: Anders Broman <a.broman58@gmail.com>
As documented in epan/exceptions.h, return/goto should never be used in
a TRY/CATCH/FINALLY block as ENDTRY must be executed first. Additionally
clamp the exit code since values larger than 255 will wrap around. Use a
small value as shells typically use 128+signal for termination signals.
Verified against packet-t125.c and ftype-protocol.c while they suffered
from the return bug. Tested against packet-gssapi.c for lack of false
positives (goto with labels within the function) and against:
int main() {
TRY {
goto bar;
goto omg;
goto bar;
goto barrie;
barrie: ;
} ENDTRY;
bar: meh;
}
Change-Id: I44484add34e238e07a84fc2c74b69f50ba6dc3f3
Ping-Bug: 15189
Reviewed-on: https://code.wireshark.org/review/30097
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Rename packet-ssl{,-utils}.[ch] to packet-tls{,-utils}.[ch].
Change-Id: I4732162ec131ddf0734b3dd191ccc9e48a76ce06
Reviewed-on: https://code.wireshark.org/review/29659
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove leading spaces early such that the regex in find_remove_ei_defs
can avoid (falsely) matching every line (saves 97% for packet-rrc.c).
Copy the improved remove_if0_code from checkAPIs.pl (saves 600ms).
packet-ieee80211.c used to spend 240ms and now completes in 165ms.
packet-rrc.c used to spend 53.7s and now completes in 0.85s.
Change-Id: I6469f7c11839fab2f33c49d3c839473f1d4902d2
Reviewed-on: https://code.wireshark.org/review/29795
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The initial execution time on packet-ieee80211.c was 940ms. Optimize:
- Assume that "static const value_string ... = { ... };" does not have
other preceding stuff (including optional whitespace). This speeds up
check_value_string_arrays and reduces runtime by 440ms to 500ms.
- Rewrite remove_if0_code to avoid invoking a substitution for every
line. This reduces runtime by 130ms to 370ms.
packet-rrc.c used to take 9.4s. The fixes improved it to 3.0s and 2.8s.
Change-Id: Ifc7efa447d64dccba3e211f0741099451b61b95a
Reviewed-on: https://code.wireshark.org/review/29794
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
"fix-encoding-args.pl epan/dissectors/packet-ieee80211.c" used to take
over 12 seconds to complete. After this change it is reduced to 400ms.
Profiling with Devel::NYTProf showed two issues:
- find_hf_array_entries (5 seconds): matching leading whitespace
triggers a candidate match against every line. Fix this by removing
whitespace prior to matching.
- fix_encoding_args_by_hf_type (7.5 seconds): executing 2131 different
substitution patterns is slow. Fix this by grouping field names and
execute the substitution only once afterwards (in total 6 calls).
packet-rrc.c is by far the largest file with 215k lines, this used to
take forever (321s) and now completes in 1.3s.
Regression tested by removing "ENC_ASCII" and "ENC_UTF_8" in
dissect_venue_name_info, the expected warnings are still visible.
Change-Id: I071038e8fcb56474ac41223568ce6724258c059d
Reviewed-on: https://code.wireshark.org/review/29789
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We no longer use red.libssh.org, so the file number isn't needed any
more.
Change-Id: I4cc6eb242eac51219742731cfa82a7bfe9fff2c3
Reviewed-on: https://code.wireshark.org/review/29771
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Downloading from red.libssh.org got "curl: (51) SSL: no alternative
certificate subject name matches target host name 'red.libssh.org'" on
my Mojave virtual machine.
Change-Id: Iab8016c4dc5200c80bff3c0cdc776bc922f4dd59
Reviewed-on: https://code.wireshark.org/review/29768
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use HTTP rather than FTP; the FTP server appears no longer to be
available.
Change-Id: I4446cc48818f419a341880da53db8670170794ae
Reviewed-on: https://code.wireshark.org/review/29765
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use of 32-bit value_string for 64-bit fields currently results in a
runtime error during use, better catch it earlier. Use of 64-bit
val64_string without BASE_VAL64_STRING will probably crash.
Since many dissectors use no macro for value_string_ext, accept both
VALS_EXT_PTR(x) and &x forms.
Change-Id: I59a3f67425e7c00bdd54cbffd91e498ee0b078cd
Reviewed-on: https://code.wireshark.org/review/29756
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Fields with display values such as "BASE_RANGE_STRING | BASE_DEC" used
to be ignored, make sure that the regex detects such fields.
Change-Id: I80d4331e3fb75092ffd768dabb85c5f13c9b5462
Reviewed-on: https://code.wireshark.org/review/29755
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Tested with dissectors like epan/dissectors/packet-netlink-sock_diag.c.
Change-Id: Icb43892d68896a8f61f4c0caf413327f0479f007
Reviewed-on: https://code.wireshark.org/review/29754
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Fixes checkAPIs error:
Error: the blurb for hf_skinny_callState ("CallState") matches the
field name ("callState") in epan/dissectors/packet-skinny.c
Change-Id: Id12396eb101bf66e148aed95d5c773b90d06ff34
Fixes: v1.99.0-rc1-1511-g276a697a6b ("[RFC] Skinny: Rewrite using automatic code generation")
Reviewed-on: https://code.wireshark.org/review/29747
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the ability to specify maximum function counts for each group to
checkAPIs. Add maximum counts for the "termoutput" and "abort" groups
where needed. Show summaries in various checkAPI targets.
Switch uses of ws_g_warning back to plain g_warning.
Change-Id: I5cbddc8c671729e424eed8551f69116d16491976
Reviewed-on: https://code.wireshark.org/review/29721
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add comments containing the resonse headers for the URLs we fetch.
standards-oui.ieee.org currently returns inconsistent results depending
on which host you happen to resolve.
Change-Id: I4adba7e51628d0350ba8e091523807ec85009700
Reviewed-on: https://code.wireshark.org/review/29729
Reviewed-by: Gerald Combs <gerald@wireshark.org>
LUPDATE_FILES is a string, not an array.
Change-Id: Ibeef6fd45805f82eeff8c26f7110779603d9d30a
Reviewed-on: https://code.wireshark.org/review/29724
Reviewed-by: Gerald Combs <gerald@wireshark.org>
If the PyICU module is available, use it to truncate manufacturer
names by grapheme clusters.
Change-Id: Ib7dcbb126809df496a534f44a47871a1b28dc539
Reviewed-on: https://code.wireshark.org/review/29660
Reviewed-by: Gerald Combs <gerald@wireshark.org>
It was setting EF_TYPE and then clearing it; it should set EF_TYPE and
clear EF_VALS.
Change-Id: Ie0a85a12646c0395e50abb34caf32367e4191da0
Reviewed-on: https://code.wireshark.org/review/29621
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Remove some entries from manuf.tmpl that are either redundant or less
informative that their corresponding IEEE entries. Add a missing '"' to
make-manuf.py.
Change-Id: Ia69f4529c5fa1b39f1662b94d072c65bd2d969ea
Reviewed-on: https://code.wireshark.org/review/29568
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The download links offered by the IEEE at
https://standards.ieee.org/products-services/regauth/ are CSV files.
Updating the Perl version to support CSV would have required rewriting a
significant portion of the script along with either adding a dependency
on Text::CSV or writing our own CSV parser.
Migrate it to Python, which has a built-in CSV module.
Change-Id: I39ba0ec873145f44374ab9f751e8bde51535ca4d
Reviewed-on: https://code.wireshark.org/review/29442
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Update docbook/wsug_src/*.txt using tools/update-tools-help.py. This
removes a lot of unwanted behavior that came with updating via a CMake
target.
Change-Id: I0a24f425e9673ef7bd074210d7047654c6755e79
Reviewed-on: https://code.wireshark.org/review/29416
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We no longer convert PNGs to GdkPixBufs.
Change-Id: I5ca9aceaf2dde5a36cdaa454e87e2bfea5a6aa0a
Reviewed-on: https://code.wireshark.org/review/29417
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add code to dissect:
- Top level nested attributes
- Top level nested array attributes
- Top level attributes with enum fields
- nl80211_band_attr sub attribute
- nl80211_bss sub attribute
- nl80211_sta_info sub attribute
- Attributes containing 802.11 information elements
Also update tools/generate-nl80211-fields.py to generate further
code blocks.
NOTE: This commit will not build alone as it does not contain the
generated definitions needed.
Depends-On: Ibd8c296c4a3d2f880f359f075271b89625367898
Change-Id: I23b87f41c6230d3fc1eb0f6b050b0d5209a9dd5c
Reviewed-on: https://code.wireshark.org/review/29317
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It's incorrectly binding to apt-get update and not install.
Change-Id: Iac2bc040063e56c9a9ddfe27ebfb816400f82206
Reviewed-on: https://code.wireshark.org/review/29381
Reviewed-by: João Valverde <j@v6e.pt>
Add support for aliasing one protocol name to another and for filtering
using aliased fields. Mark aliased fields as deprecated.
Rename the BOOTP dissector to DHCP and alias "bootp" to "dhcp". This
lets you use both "dhcp.type" and "bootp.type" as display filter fields
without having to duplicate all 500+ DHCP/BOOTP fields.
To do:
- Add checks to proto.c:check_valid_filter_name_or_fail?
- Transition SSL to TLS.
- Rename packet-bootp.c to packet-dhcp.c?
Change-Id: I29977859995e8347d80b8e83f1618db441b10279
Ping-Bug: 14922
Reviewed-on: https://code.wireshark.org/review/29327
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We are exporting a registration function from libwireshark just
to have it passed back as a callback. Seems unnecessary.
Change-Id: I7621005c9be11691d319102326824c5e3520a6f3
Reviewed-on: https://code.wireshark.org/review/29328
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Change the plugin compatibility check to make it more convenient to
define and check the major.minor Wireshark version.
Change-Id: I2a6d2a746682c29504311cce5c457e0a852c3daf
Reviewed-on: https://code.wireshark.org/review/29224
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
We use it elsewhere; use it here, as FreeBSD's /bin/sh doesn't support
[[ as a test operator.
Change-Id: I183b10cc6f4aceec9725027474848061e8ea4fd9
Reviewed-on: https://code.wireshark.org/review/29232
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Limit Valgrind to the first 10,000 packets in each file.
Change-Id: I27be212ddb437c643ffb413bb9d1c809dbe98a55
Reviewed-on: https://code.wireshark.org/review/29210
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>