Add some ENC_ values for various flavors of packed BCD, and use that
instead of explicitly calling tvb_bcd_dig_to_wmem_packet_str() and
adding the result.
Change-Id: I07511d9d09c9231b610c121cd6ffb3b16fb017a9
Reviewed-on: https://code.wireshark.org/review/36952
Reviewed-by: Guy Harris <gharris@sonic.net>
Fixed a few instances where fix were obvious, others are
less clear.
The check in proto.c is protected by ENABLE_CHECK_FILTER.
Change-Id: I4edee4e67bd53bbf2eb809d68c87983a7c5a66f3
Reviewed-on: https://code.wireshark.org/review/36645
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This allows taps that can fail to report an error and fail; a failed
tap's packet routine won't be called again, so they don't have to keep
track of whether they've failed themselves.
We make the return value from the packet routine an enum.
Don't have a separate type for the per-packet routine for "follow" taps;
they're expected to act like tap packet routines, so just use the type
for tap packet routines.
One tap packet routine returned -1; that's not a valid return value, and
wasn't one before this change (the return value was a boolean), so
presume the intent was "don't redraw".
Another tap routine's early return, without doing any work, returned
TRUE; this is presumably an error (no work done, no need to redraw), so
presumably it should be "don't redraw".
Clean up some white space while we're at it.
Change-Id: Ia7d2b717b2cace4b13c2b886e699aa4d79cc82c8
Reviewed-on: https://code.wireshark.org/review/31283
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make the time stamp precision a 4-bit bitfield, so, when combined with
the other bitfields, we have 32 bits. That means we put the flags at
the same structure level as the time stamp precision, so they can be
combined; that gets rid of an extra "flags." for references to the flags.
Put the two pointers next to each other, and after a multiple of 8 bytes
worth of other fields, so that there's no padding before or between them.
It's still not down to 64 bytes, which is the next lower power of 2, so
there's more work to do.
Change-Id: I6f3e9d9f6f48137bbee8f100c152d2c42adb8fbe
Reviewed-on: https://code.wireshark.org/review/31213
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It has been replaced by cmake.
Change-Id: I83a5eddb8645dbbf6bca9f026066d2e995d8e87a
Reviewed-on: https://code.wireshark.org/review/26969
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
There are no "old" versions of them that we're keeping around.
Change-Id: I3c76a14d0ec1a06df39c547da37f4dea9987df4d
Reviewed-on: https://code.wireshark.org/review/25892
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Rename range_foreach_r() to range_foreach(), getting rid of the old
range_foreach().
If your callback doesn't require an additional argument, just pass NULL
when calling range_foreach(), and declare the argument as unused.
Change-Id: I49a56f90610e39cf2ddc398c9e30ed11a6ca90db
Reviewed-on: https://code.wireshark.org/review/23025
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: Id749c41947c6300f2c82ed947352c336f9e45b72
Reviewed-on: https://code.wireshark.org/review/19838
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This is mostly to address memory leaks in range preferences (the biggest
user of range functionality) on shutdown.
Now range preferences must use epan scoped memory when referencing
internal preference structures to keep consistency.
Change-Id: Idc644f59b5b42fa1d46891542b53ff13ea754157
Reviewed-on: https://code.wireshark.org/review/19387
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Have all dissector tables have a "supports Decode As" flag, which
defaults to FALSE, and which is set to TRUE if a register_decode_as()
refers to it.
When adding a dissector to a dissector table with a given key, only add
it for Decode As if the dissector table supports it.
For non-FT_STRING dissector tables, always check for multiple entries
for the same protocol with different dissectors, and report an error if
we found them.
This means there's no need for the creator of a dissector table to
specify whether duplicates of that sort should be allowed - we always do
the check when registering something for "Decode As" (in a non-FT_STRING
dissector table), and just don't bother registering anything for "Decode
As" if the dissector table doesn't support "Decode As", so there's no
check done for those dissector tables.
Change-Id: I4a1fdea3bddc2af27a65cfbca23edc99b26c0eed
Reviewed-on: https://code.wireshark.org/review/17402
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If an ASN.1 dissector is calling register_dissector for itself in its proto_register_xxx
function and then calling find_dissector for itself in its proto_reg_handoff_xxx
function then just create a static handle for that dissector and use the return
value of register_dissector, so the find isn't necessary.
Change-Id: I911bdadc2fb4259601c141b955e741a2369cc447
Reviewed-on: https://code.wireshark.org/review/16233
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Now that nmake build system has been removed they are not needed anymore.
Change-Id: I88075f955bb4349185859c1af4be22e53de5850f
Reviewed-on: https://code.wireshark.org/review/16050
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Also some other tricks to remove unnecessary tvb_get_string_enc calls.
Change-Id: I2f40d9175b6c0bb0b1364b4089bfaa287edf0914
Reviewed-on: https://code.wireshark.org/review/16158
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Add a reference count to stat_tap_table_ui to prevent bad deallocations.
Bug: 12437
Change-Id: Ib9b1f929d08a574c306dc755ec416ab94a3fd6d3
Reviewed-on: https://code.wireshark.org/review/15920
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This will make it easier to determine protocol dependencies.
Some LLC OUI dissector tables didn't have an associated protocol, so they were left without one (-1 used)
Change-Id: I6339f16476510ef3f393d6fb5d8946419bfb4b7d
Reviewed-on: https://code.wireshark.org/review/14446
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add missing newline or remove extra newlines at the end of the file.
Trim trailing whitespace.
Change-Id: I73b7a4e20969bc13f72bf97e981fd5de89d8bb17
Reviewed-on: https://code.wireshark.org/review/14400
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Guy Harris