The RFtap protocol is a simple metadata header designed to provide
Radio Frequency (RF) metadata about frames.
For official specifications see: https://rftap.github.io/
Signed-off-by: Jonathan Brucker <jonathan.brucke@gmail.com>
Change-Id: I0d008b2baadcc5cc9577113e9795eef2691b961a
Reviewed-on: https://code.wireshark.org/review/17355
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Update to reflect current reality. Still needs a lot of work.
Change-Id: Id6bb12f5e8ca42bbadc237f148bb388b54a321e2
Reviewed-on: https://code.wireshark.org/review/17247
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Specifically, remove all the stuff that was listed as new in the 2.2 release
notes. Comment out some empty sections.
(Note that the "Encrypted UDP based FTP with multicast" protocol is removed
because that dissector was backported to master-2.2.)
Change-Id: I6663b1f4456b3d4f401696af764a275dfa39ad99
Reviewed-on: https://code.wireshark.org/review/17087
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
It was added in I86efa0c725667083cb252e5df3bfc69118df3059.
Change-Id: Ie7a80cac232bc2f763a5526bb3049fccbdc96e22
Reviewed-on: https://code.wireshark.org/review/17085
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
This module implements a dissector for the main table in a SCTE-35 message, a
splice_info_section. This payload is carried in a MPEG Section Table with a
table ID of 0xFC. PIDs carrying this sort of table are also noted in the PMT
with a stream type of 0x86, and a registration descriptor with fourcc 'CUEI'.
The various splice command types are implemented in separate modules, and are
linked to this dissector through the field scte35.splice_command_type. Field
names follow the conventions documented in the SCTE35 specification.
This dissector does not support encrypted SCTE35 messages, other than
indication through the scte35.encrypted_packet flag.
The SCTE-35 protocol is described by the Society of Cable Telecommunications
Engineers at <https://www.scte.org/documents/pdf/Standards/Top%20Ten/ANSI_SCTE%2035%202013.pdf>.
Bug: 12521
Change-Id: I3113e6e61a4e7f1a4a932a0128ca2846c7ce6e6f
Reviewed-on: https://code.wireshark.org/review/15562
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
--sort-and-group--
One
--sort-and-group--
used to be converted into
and One
Remove the leading and in this case.
Change-Id: I3332b316c4fcce164c94e36c3c7b4480947bdf68
Reviewed-on: https://code.wireshark.org/review/17003
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
See http://uftp-multicast.sourceforge.net/ for the original publication
of these dissectors. Both v3 and v4 protocols are dissected.
Bug: 12718
Change-Id: If691a573b9440c7cbe3b35711231b628cf3c8604
Reviewed-on: https://code.wireshark.org/review/16936
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Icc9b6c6bcaac1f3056fa83a4ae9ef66e1537b1a5
Reviewed-on: https://code.wireshark.org/review/16492
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 12657
Change-Id: Ib0d9e18b31c1252f63025b10f7a67de6a5e4462c
Reviewed-on: https://code.wireshark.org/review/16491
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Compress the source tarball using xz instead of bzip2. Other open source
projects (including many of our dependencies) have been using xz for a
while so hopefully this won't be too much of a shock.
Remove the patch-bzip2 Autotools target while we're here.
Change-Id: I456d27b6cd56a43aba829bd45938f98568eb7b1d
Reviewed-on: https://code.wireshark.org/review/16735
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Ericsson uses a vendor-specific packetized PCU-CCU interface on their
packetized A-bis, which can be encapsulated in their own variant of HDLC
on top of L2TP.
The new P-GSL dissector is called from packet-ehdlc.c, which in turn
integrates with packet-l2tp.c.
Change-Id: Ifca190577b1c9691209221d79e3ef034dc3ca650
Reviewed-on: https://code.wireshark.org/review/16510
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This dissector currently onl dissects the TFP header, treating the
payload (TRAU) as opaque data. Still, it is an improvement to see the
header information like timeslot, sequence number, delay and frame type.
The new TFP dissector is called from packet-ehdlc.c, which in turn is
used inside Ericsson-specific L2TP.
Change-Id: I8835c07e259ec9a324ec92aac39abbef2c902af3
Reviewed-on: https://code.wireshark.org/review/16509
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This is an attempt to standardize display/handling of checksum fields for all dissectors.
The main target is for dissectors that do validation, but dissectors that just report the
checksum were also included just to make them easier to find in the future.
Bug: 10620
Bug: 12058
Ping-Bug: 8859
Change-Id: Ia8abd86e42eaf8ed50de6b173409e914b17993bf
Reviewed-on: https://code.wireshark.org/review/16380
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Based on IEEE Std 802.1BR-2012
Bug: 12613
Change-Id: Ic5198471f67a1af728df40a09443a1cab2621169
Reviewed-on: https://code.wireshark.org/review/16402
Reviewed-by: Michael Mann <mmann78@netscape.net>
Generating LUA documentation source for the developer guide says that
it's generating XML, which it did before the switch to AsciiDoc. Fix
this statement.
Change-Id: Ib8625af84c74b5f6dc31c1e9e5ded80d9d7940ff
Reviewed-on: https://code.wireshark.org/review/16320
Reviewed-by: Michael Mann <mmann78@netscape.net>
Added info about debugging under Visual Studio.
Updated buildbot info.
Change-Id: I9a6a0a2b14e3616a35f652c99b04ee23ea642ba5
Reviewed-on: https://code.wireshark.org/review/16307
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Add actions to switch between ASCII and EBCDIC, similar to the hex and
bits items.
Bug: 5298
Change-Id: Ib601ac6e89411e6482f3e4172726e16a08fdbd2b
Reviewed-on: https://code.wireshark.org/review/16225
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Recompress PNGs using the current versions of various compressors:
optipng 0.7.6
advpng 1.20
advdef 1.20
pngcrush 1.8.1
Parallelize PNG compression. Note why we're not using a couple of other
compression utilities.
Change-Id: I52757d0bc2d424013e7f00b693a0f5378427cc31
Reviewed-on: https://code.wireshark.org/review/16209
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Now that nmake build system has been removed they are not needed anymore.
Change-Id: I88075f955bb4349185859c1af4be22e53de5850f
Reviewed-on: https://code.wireshark.org/review/16050
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Generate column text dynamically. This keeps us from having to iterate
over our tree items each time we receive updates.
Set the uniformRowHeights property.
Stop automatically resizing columns after 200 items.
Fixup name resolution behavior. Disable the checkbox if host name
resolution is disabled.
Change-Id: Ib2fef604d6ee9e39a8b1edd72d58d0cb02d3bb64
Reviewed-on: https://code.wireshark.org/review/16110
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
TShark has had the functionality for awhile. While the GUI version
still has ways to change and persist Decode As functionality, adding
command line functionality gives the Decode As from initial launch
of the GUI.
Was also an excuse to refactor a bunch of code out of tshark.c
Bug: 5143
Change-Id: Ie67007d75e897bc06cc9afd9b84372a96b93778c
Reviewed-on: https://code.wireshark.org/review/16008
Reviewed-by: Michael Mann <mmann78@netscape.net>
Should we call it the intelligenter scroll bar?
Change-Id: I67e76c1aabeb4b2e87e38815fe4ab120f0869b25
Reviewed-on: https://code.wireshark.org/review/15936
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Device dialog appears when user double clicks on device in
Devices dialog (Bluetooth->Devices). It provides
summary of device, like BD_ADDR, name, timeouts, etc.
Base on information from HCI layer, so this feature is more interesting
for local devices (capturing on its side). Each field has changes counter,
what mean that value at specified field changes in time, for example:
user change device name 3 times. Please note that initial change
is not counted. It means that you can see fielkd without any value
then change occur and counter is not increased. It will be increased
next time. Reason for that is in most cases field value is unknown
at start.
Change-Id: Ife0a6bd454eac00a28f8eb2906e1b395695b0307
Reviewed-on: https://code.wireshark.org/review/15793
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Many of our AsciiDoc "macros" are simple string replacements. Start
converting them to attributes.
Update the release notes.
Change-Id: I23d9ffd311f13a34c16cde3b4898b7f7bb8ba638
Reviewed-on: https://code.wireshark.org/review/15778
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add Follow, Firewall, and Flow updates.
Sort and group the new protocol list.
Remove some fixed bugs.
Change-Id: I76f92f746d0f695567cc411cd6c6cd8d59d923c4
Reviewed-on: https://code.wireshark.org/review/15712
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Showing 'if (tree)' constructions in code samples and then having to
explain these are no longer nessasery, or even wrong in many cases,
indicates that these shouldn't be in the code samples in the first
place.
Change-Id: I1a0ccc84ad24ff998548fa913bc00c0336bf1123
Reviewed-on: https://code.wireshark.org/review/15659
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I74cddcce3104da269e9587ee78ff29785734188f
Reviewed-on: https://code.wireshark.org/review/12479
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Update the graphic showing the functional blocks, incorporating the
changes which were listed as incorrect in the corresponding text.
Change-Id: Id962b4e31cb2912a4de75fc0a7e7ab97ff60d117
Reviewed-on: https://code.wireshark.org/review/15662
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 12455
Change-Id: I1c1fc4b2bff0e446d3eb8e1b3be4ea7669cec923
Reviewed-on: https://code.wireshark.org/review/15511
Reviewed-by: Michael Mann <mmann78@netscape.net>
We need to point xsltproc to the images directories.
The bigger images have scaling problems but at least they're
there now.
This is already done in cmake.
Change-Id: I260a8f3e335b9f5726811bcd6811f6c5b9f3a6b2
Reviewed-on: https://code.wireshark.org/review/15408
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
We neeed to set the build directory (because that's where the wslua stuff gets
put).
Also fix up wslua dependencies:
- It's needed (only) for the asciidoc->XML step
- It's not needed for the wsug any more
Change-Id: Ic1231a964b1edfb7d2eeacc5cc1c3fdda6969f21
Reviewed-on: https://code.wireshark.org/review/15407
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Let the make recipe fail if a dependency is missing. That is more user-friendly
(a2x: command not found) than an empty target and having to re-run configure.
Test for both w3m and lynx when generating text files. If neither is available
skip it.
Add an explicit target to build pdf documentation.
Change-Id: I760475acd7278f5ab5a782c1828a134c58cf7b42
Reviewed-on: https://code.wireshark.org/review/15229
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
