This change allows you to add a new packet-*.c file and not cause a
recompilation of everything that #include's packet.h
Add the plugin_api.[ch] files ot the plugins/Makefile.am packaging list.
Add #define YY_NO_UNPUT 1 to the lex source so that the yyunput symbol
is not defined, squelching a compiler complaint when compiling the generated
C file.
svn path=/trunk/; revision=1637
value in the length field not only the Ethernet MAC header size, but
also the offset in the frame of the Ethernet MAC header, so that, if the
802.3 frame is encapsulated in some other type of frame, the total frame
length includes the header for that frame as well.
svn path=/trunk/; revision=1526
whether we're building a protocol tree or not.
Make "dissect_eth()" use "BYTES_ARE_IN_FRAME()" to see if we have a full
Ethernet header - it can be called with a non-zero offset, if Ethernet
frames are encapsulated inside other frames (e.g., ATM LANE).
Make capture routines take an "offset" argument if the corresponding
dissect routine takes one (for symmetry, and for Cisco ISL or any other
protocol that encapsulates Ethernet or Token-Ring frames inside other
frames).
Pass the frame lengths to capture routines via the "pi" structure,
rather than as an in-line argument, so that they can macros such as
"BYTES_ARE_IN_FRAME()" the way the corresponding dissect routines do.
Make capture routines update "pi.len" and "pi.captured_len" the same way
the corresponding diseect routines do, if the capture routines then call
other capture routines.
Make "capture_vlan()" count as "other" frames that are too short, the
way other capture routines do.
svn path=/trunk/; revision=1525
eth.length were being pulled put into the proto_tree (logical and GUI),
but the fields were highlighted in the hex dump w/o adding offset.
svn path=/trunk/; revision=1062
dynamically-assigned "ett_" integer values, assigned by
"proto_register_subtree_array()"; this:
obviates the need to update "packet.h" whenever you add a new
subtree type - you only have to add a call to
"proto_register_subtree_array()" to a "register" routine and an
array of pointers to "ett_", if they're not already there, and
add a pointer to the new "ett_" variable to the array, if they
are there;
would allow run-time-loaded dissectors to allocate subtree types
when they're loaded.
svn path=/trunk/; revision=1043
structure to "dl_src"/"dl_dst", "net_src"/"net_dst", and "src"/"dst"
addresses, where an address is an address type, an address length in
bytes, and a pointer to that many bytes.
"dl_{src,dst}" are the link-layer source/destination; "net_{src,dst}"
are the network-layer source/destination; "{src,dst}" are the
source/destination from the highest of those two layers that we have in
the packet.
Add a port type to "packet_info" as well, specifying whether it's a TCP
or UDP port.
Don't set the address and port columns in the dissector functions; just
set the address and port members of the "packet_info" structure. Set
the columns in "fill_in_columns()"; this means that if we're showing
COL_{DEF,RES,UNRES}_SRC" or "COL_{DEF,RES,UNRES}_DST", we only generate
the string from "src" or "dst", we don't generate a string for the
link-layer address and then overwrite it with a string for the
network-layer address (generating those strings costs CPU).
Add support for "conversations", where a "conversation" is (at present)
a source and destination address and a source and destination port. (In
the future, we may support "conversations" above the transport layer,
e.g. a TFTP conversation, where the first packet goes from the client to
the TFTP server port, but the reply comes back from a different port,
and all subsequent packets go between the client address/port and the
server address/new port, or an NFS conversation, which might include
lock manager, status monitor, and mount packets, as well as NFS
packets.)
Currently, all we support is a call that takes the source and
destination address/port pairs, looks them up in a hash table, and:
if nothing is found, creates a new entry in the hash table, and
assigns it a unique 32-bit conversation ID, and returns that
conversation ID;
if an entry is found, returns its conversation ID.
Use that in the SMB and AFS code to keep track of individual SMB or AFS
conversations. We need to match up requests and replies, as, for
certain replies, the operation code for the request to which it's a
reply doesn't show up in the reply - you have to find the request with a
matching transaction ID. Transaction IDs are per-conversation, so the
hash table for requests should include a conversation ID and transaction
ID as the key.
This allows SMB and AFS decoders to handle IPv4 or IPv6 addresses
transparently (and should allow the SMB decoder to handle NetBIOS atop
other protocols as well, if the source and destination address and port
values in the "packet_info" structure are set appropriately).
In the "Follow TCP Connection" code, check to make sure that the
addresses are IPv4 addressses; ultimately, that code should be changed
to use the conversation code instead, which will let it handle IPv6
transparently.
svn path=/trunk/; revision=909
the base for numbers to be displayed in, bitmasks for bitfields, and blurbs
(which are one or two sentences describing the field).
proto_tree_add*() routines now automatically handle bitfields. You tell
it which header field you are adding, and just pass it the value of the
entire field, and the proto_tree routines will do the masking and shifting
for you.
This means that bitfields are more naturally filtered via dfilter now.
Added Phil Techau's support for signed integers in dfilters/proto_tree.
Added the beginning of the SNA dissector. It's not complete, but I'm
committing it now because it has example after example of how to use
bitfields with the new header_field_info struct and proto_tree routines.
It was the impetus to change how header_field_info works.
svn path=/trunk/; revision=815
and the info field an indication of whether it's Ethernet II, raw 802.3,
or (LLC-atop) 802.3 (which will be overridden by other protocols, if we
know the protocol inside the frame).
svn path=/trunk/; revision=559
and in different capture files; throw in some heuristics to try to
figure out whether the 4-byte header is:
1) PPP-over-HDLC (some version of ISDN4BSD?);
2) big-endian AF_ value (BSD on big-endian platforms);
3) little-endian AF_ value (BSD on little-endian platforms);
4) two octets of 0 followed by an Ethernet type (Linux, at least
on little-endian platforms, as mutated by "libpcap").
Make a separate Wiretap encapsulation type, WTAP_ENCAP_NULL,
corresponding to DLT_NULL.
Have the PPP code dissect the frame if it's PPP-over-HDLC, and have
"ethertype()" dissect the Ethernet type and the rest of the packet if
it's a Linux-style header; dissect it ourselves only if it's an AF_
value.
Have Wiretap impose a maximum packet size of 65535 bytes, so that it
fails more gracefully when handed a corrupt "libpcap" capture file
(other capture file formats with more than a 16-bit capture length
field, if any, will have that check added later), and put that size in
"wtap.h" and have Ethereal use it as its notion of a maximum packet
size.
Have Ethereal put up a "this file appears to be damaged or corrupt"
message box if Wiretap returns a WTAP_ERR_BAD_RECORD error when opening
or reading a capture file.
Include loopback interfaces in the list of interfaces offered by the
"Capture" dialog box, but put them at the end of the list so that it
doesn't default to a loopback interface unless there are no other
interfaces. Also, don't require that an interface in the list have an
IP address associated with it, and only put one entry in the list for a
given interface (SIOCGIFCONF returns one entry per interface *address*,
not per *interface* - and even if you were to use only IP addresses, an
interface could conceivably have more than one IP address).
Exclusively use Wiretap encapsulation types internally, even when
capturing; don't use DLT_ types.
svn path=/trunk/; revision=540
file, instead of throwing out all but LANE or RFC 1483 data frames and
pretending that the former are just Ethernet or Token-Ring frames.
Add some level of decoding for ATM LANE, but not all of it; the rest,
including decoding non-LANE frames, is left as an exercise for somebody
who has captures they want to decode, an interest in decoding them, ATM
expertise, and time....
svn path=/trunk/; revision=523
bunch of source files.
Replace the "payload" field of a "packet_info" structure with "len" and
"captured_len" fields, which contain the total packet length and total
captured packet length (including all headers) at the current protocol
layer (i.e., if a given layer has a length field, and that length field
says its shorter than the length we got from the capture, reduce the
"pi.len" and "pi.captured_len" values appropriately). Those fields can
be used in the future if we add checks to make sure a field we're
extracting from a packet doesn't go past the end of the packet, or past
the captured part of the packet.
Get rid of the additional payload argument to some dissection functions;
use "pi.captured_len - offset" instead.
Have the END_OF_FRAME macro use "pi.captured_len" rather than
"fd->cap_len", so that "dissect the rest of the frame" becomes "dissect
the rest of the packet", and doesn't dissect end-of-frame padding such
as padding added to make an Ethernet frame 60 or more octets long. (We
might want to rename it END_OF_PACKET; if we ever want to label the
end-of-frame padding for the benefit of people curious what that extra
gunk is, we could have a separate END_OF_FRAME macro that uses
"fd->cap_len".)
svn path=/trunk/; revision=506
as it standed depends on your lex being flex, but that only matters if you're
a developer. The distribution will include the dfilter-scanner.c file, so
that if the user doesn't modify dfilter-scanner.l, he won't need flex to
re-create the *.c file.
The new lex scanner gives me better syntax checking for ether addresses. I
thought I could get by using GScanner, but it simply wasn't powerful enough.
All operands have English-like abbreviations and C-like syntax:
and, && ; or, || ; eq, == ; ne, != ; , etc.
I removed the ETHER_VENDOR type in favor of letting the user use the [x:y]
notation: ether.src[0:3] == 0:6:29 instead of ether.srcvendor == 00:06:29
I implemented the IPXNET field type; it had been there before, but was
not implemented. I chose to make it use integer values rather than byte
ranges, since an IPX Network is 4 bytes. So a display filter looks like this:
ipx.srcnet == 0xc0a82c00
rather than this:
ipx.srcnet == c0:a8:2c:00
I can supposrt the byte-range type IPXNET in the future, very trivially.
I still have more work to do on the parser though. It needs to check ranges
when extracting byte ranges ([x:y]) from packets. And I need to get rid
of those reduce/reduce errors from yacc!
svn path=/trunk/; revision=414
suggestion, this new method using a static array should use less memory
and be faster. It also has a nice side-effect of making the source-code
more readble, IMHO.
Changed the print routines to look for protocol proto_data instead of
looking at the text label as they did before, hoping that the data hex
dump field item starts with "Data (".
Added the -G keyword to ethereal to make it dump a glossary of display
filter keywords to stdout and exit. This data is then formatted with
the doc/dfilter2pod perl program to pod format, which is combined
with doc/ethereal.pod.template to create doc/ethereal.pod, from which
the ethereal manpage is created. This way we can keep the manpage up-to-date
with a list of fields that can be filtered on.
svn path=/trunk/; revision=364
mechanism that is built into ethereal. Wiretap is now used to read all
file formats. Libpcap is used only for capturing.
svn path=/trunk/; revision=342
reference the protocol tree with struct proto_tree and struct proto_item
objects. That way, the packet decoding source code file can be used with
non-gtk packet decoders, like a curses-based ethereal, e.g. I also re-arranged
some of the information in packet.h to more appropriate places (like other
packet-*.[ch] files).
svn path=/trunk/; revision=223
because it is still in its infancy, but it can be compiled in optionally.
The library exists in its own subdirectory ethereal/wiretap. This patch also
edits all the packet-*.c files to remove the #include <pcap.h> line which is
unnecessary in these files. In the ethereal code, file.c is the most heavily
modified with #ifdef WITH_WIRETAP lines for the optional library.
svn path=/trunk/; revision=82
generalizes the column printing code, adds a "frame" tree item to
the tree view, and fixes a bunch of miscellaneous coding bugs.
svn path=/trunk/; revision=31
Gilbert Ramirez