Add ability to jumps to connect or disconnect frame from any frame
binded to specific PSM session, what should improves analyse by user.
Change-Id: Icdf6634bf128ba83721d39cf8986cf16bfb4e7a4
Reviewed-on: https://code.wireshark.org/review/7470
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Also start decoding next two profile attribute groups in SDP
(MPS and CTN) and add new two fields in EIR/AD.
Change-Id: I4dc13df2b3b13e8c2a2a5c4af2cabae9ee83d539
Reviewed-on: https://code.wireshark.org/review/6409
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Specifically:
- Set packet.h to be the first wireshark #include after
config.h and "system" #includes.
packet.h added as an #include in some cases when missing.
- Remove some #includes included (directly/indirectly) in
packet.h. E.g., glib.h.
(Done only for those files including packet.h).
- As needed, move "system" #includes to be after config.h and
before wireshark #includes.
- Rework various #include file specifications for consistency.
- Misc.
Change-Id: Ifaa1a14b50b69fbad38ea4838a49dfe595c54c95
Reviewed-on: https://code.wireshark.org/review/5923
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Bill Meier <wmeier@newsguy.com>
Bluetooth dissector is used to add ability to filter all bluetooth
payload from capture files (there are many transport like:
hci_h4, hci_h1, hci_usb, hci_mon, btle). Also it is used to placeholder for
all data tree used to store additional informations like bd_addrs, names, etc.
Finally it is used to be one point for Bluetooth
Endpoints/Conversation filtering what is enabled now.
Also add Master/Slave Role and Connection Mode tracking.
Change-Id: I67048080fb8ee16fa0f4ec429c1257de81ddd737
Reviewed-on: https://code.wireshark.org/review/5771
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
On every configuration request clean options before setting anything.
Then if configuration will be rejected options will not be set to
something that is not set in next configure request.
Change-Id: I5acedde96f7ff720e916256d683937acbcd13a48
Reviewed-on: https://code.wireshark.org/review/3765
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
There are two cases:
1. btl2cap -> btrfcomm -> btobex
2. btl2cap -> btobex
Case 2 is rare, so according to its name and to avoid confusion
I based on it.
Bug:10316
Change-Id: Ibeabeaf2f8376425460c56bad8fb980b460dd940
Reviewed-on: https://code.wireshark.org/review/3225
Reviewed-by: Evan Huus <eapache@gmail.com>
Some interfaces support multiple Bluetooth adapters with events like
add/remove. We must support that to distinquish adapters streams
in case that new adapter has the same id that old one.
Next one is create session for "Connection Handle", so
next layer will now when it is connected and disconnected.
This is also used to distinguish streams.
Change-Id: I9e062c8e4cc9c033b75f1a596e8351a215169843
Reviewed-on: https://code.wireshark.org/review/2548
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Session should be finished too on HCI Disconnect and Adapter disappear.
Change-Id: I0823872e60ec932fc0831975e54dc33d49fb5dbc
Reviewed-on: https://code.wireshark.org/review/1882
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Fix warnings and try to inform user about unknown values in
"Decode As".
Also use define instead of magic number for Unknown L2CAP CIDs.
Change-Id: Ie6f26a9e3330b84cef14bbf8861ffbdbdb789225
Reviewed-on: https://code.wireshark.org/review/1880
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Example: if there is Connection Request than field with CID always
is called SCID. If we Sent this packet, it is okay, but if we Receive
it, then it is not SCID for us, but DCID. If we receive
Connection Request (DCID) and than we want to make disconnection,
so we send Disconnection Request with DCID that is SCID in
Connection Request... etc.
I try to clarify this, so rename stored SCID to Local CID
and DCID to Remote CID.
Change-Id: Idde0939a03955d8f4a10d8c9f7c43fd364254460
Reviewed-on: https://code.wireshark.org/review/1879
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
To correctly resolve connections single "ID" value
like L2CAP PSM, is not enough, because next connection may use
the same PSM value. Solution is save frame number of frame that
make disconnection.
Conclusion:
Any session key values should be updated to pair:
{ID_1, disconnect_in_frame}, {ID_2, disconnect_in_frame}...
then we should check if "disconnect_in_frame" is greater then
current frame number, otherwise it is not valid session.
Change-Id: I3d760112b6e53358a93c994f4aae455ac1bf5de6
Reviewed-on: https://code.wireshark.org/review/1878
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
The Stream is defined here as media stream that beginning on
AVDTP Start (ResponseAccept).
Also fix recognizing Channel streams by AVDTP according to the
specification that says:
1. First channel is always Signaling.
2. Second may be Media.
3. Third may be Reporting.
4. Fourth may be Recovery.
First and second will be supported right now.
Change-Id: Id6d4dae6be1b9df68382288c2d520b7ed3661237
Reviewed-on: https://code.wireshark.org/review/1053
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
CID has two roles: Source CID and Destination CID. This two roles
have another two different meanings: one if frame is received, another if frame
is sent (SCID is "DCID", etc). Then using information that PDU is "request"
or "response" we can correctly recognize CID.
This should fix unrecognized L2CAP payload while there were no valid
Disconnection Request.
Change-Id: Ibcbbb9e6966873b6af12c1e3c65c6a3983aa4163
Reviewed-on: https://code.wireshark.org/review/807
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add some command codes seen in Core 4.1 specification.
Also add some missing fields.
Change-Id: If3761744b1ada185027a560bceb66804d7eea8ec
Reviewed-on: https://code.wireshark.org/review/806
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Source/Destination BD_ADDRs and name are filterable.
Also simplify code around wmem trees, and enable commented "data"
field in unreassembled case and fix btl2cap offsets
(discovered by enabling "data" field).
Change-Id: Ic28c9bf19bcd6281b652be538b221da74df4bb76
Reviewed-on: https://code.wireshark.org/review/471
Reviewed-by: Evan Huus <eapache@gmail.com>
Interface ID should correspond to the Wireshark Interface Id
to avoid mixing data from various interfaces in dissectors.
Change-Id: Ibaa3ddab7f0ebd0985efea74439b94a5881145a7
Reviewed-on: https://code.wireshark.org/review/472
Reviewed-by: Evan Huus <eapache@gmail.com>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
From Michal Labedzki
1. Bluetooth: Implement the rest of fields in Low Energy Link Layer dissector
2. Bluetooth: Merge all UUIDs together
3. Bluetooth: Extract LE Channel MAP to separate dissector
4. Ubertooth: Dissect CC2400 registers
svn path=/trunk/; revision=54700
USB: Add support for Bluetooth Ubertooth with initial version of Low Energy Link Layer protocol and NFC ACR122
Bluetooth: L2CAP: Clarify constant
BTL2CAP_FIXED_CID_MAX should not be 0x40 because this is first
dynamic CID, so rename to BTL2CAP_FIXED_CID_LAST and set to
last fixed CID value.
svn path=/trunk/; revision=54404
Bluetooth: SCO: Add Source/Destination addresses
Bluetooth: HCRP: Use information from SDP to decoding PSM payload
From Michal Labedzki
svn path=/trunk/; revision=53816
I'm not sold on the name or module the proto_data functions live in, but I believe the function arguments are solid and gives us the most flexibility for the future. And search/replace of a function name is easy enough to do.
The big driving force for getting this in sooner rather than later is the saved memory on ethernet packets (and IP packets soon), that used to have file_scope() proto data when all it needed was packet_scope() data (technically packet_info->pool scoped), strictly for Decode As.
All dissectors that use p_add_proto_data() only for Decode As functionality have been converted to using packet_scope(). All other dissectors were converted to using file_scope() which was the original scope for "proto" data.
svn path=/trunk/; revision=53520
The basic idea behind this design is to have dissectors register with a "decode as list" with their name and dissector table. When "Decode As" dialog is launched, any "registered" dissector found in the packet will cause a tab to be created in the dialog.
This patch includes just the dissector portion of the functionality (minus packet-dcerpc.[ch] because it has hooks to the current GUI)
svn path=/trunk/; revision=53445
- when the text parameter is constant col_add_str() and col_set_str() are equivalent but col_set_str() is faster.
- same for replace col_append_fstr and col_append_str
- remove col_clear() when it's redundant:
+ before a col_set/col_add if the dissector can't throw an exception.
- replace col_append() after a col_clear() with faster col_add... or col_set
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9344
svn path=/trunk/; revision=52948
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8824
Convert bluetooth emem trees to wmem trees.
Add modelines and fix indentation.
Correct typo in wmem_tree.h that still referred to emem.
svn path=/trunk/; revision=50076
Round 2 of Bluetooth SDP updates:
- replace a lot of proto_tree_add_text with named fields
- dissect more of the protocol
- misc fixes
svn path=/trunk/; revision=48655