That's a less gross hack to suppress load failures due to not having
libwiretap than providing a no-op failure-message routine, as it at
least allows other code using a failure-message routine, such as
cmdarg_err() and routines that call it, to be used.
We really should put libwiretap and libwireshark plugins into separate
subdirectories of the plugin directories, and avoid even looking at
libwireshark plugins in programs that don't use libwireshark.
Change-Id: I0a6ec01ecb4e718ed36233cfaf638a317f839a73
Reviewed-on: https://code.wireshark.org/review/17506
Reviewed-by: Guy Harris <guy@alum.mit.edu>
A string option, if present, always has a value; it might be a null
*string*, but you won't get a null pointer (if the option isn't present,
it simply isn't present).
Fix some comments while we're at it.
Change-Id: I9c1420f56998a7d04de5c5cc2e92631b181f303a
Reviewed-on: https://code.wireshark.org/review/16564
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I5669e2442582f899643fae4a9f86ab6d505dde07
Reviewed-on: https://code.wireshark.org/review/16505
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
A block can have zero or more instances of a given option. We
distinguish between "one instance only" options, where a block can have
zero or one instance, and "multiple instances allowed" options, where a
block can have zero or more instances.
For "one instance only" options:
"add" routines add an instance if there isn't one already
and fail if there is;
"set" routines add an instance if there isn't one already
and change the value of the existing instance if there is one;
"set nth" routines fail;
"get" routines return the value of the instance if there is one
and fail if there isn't;
"get nth" routines fail.
For "multiple instances allowed" options:
"add" routines add an instance;
"set" routines fail;
"set nth" routines set the value of the nth instance if there is
one and fail otherwise;
"get" routines fail;
"get nth" routines get the value if the nth instance if there is
one and fail otherwise.
Rename "optionblock" to just "block"; it describes the contents of a
block, including both mandatory items and options.
Add some support for NRB options, including IPv4 and IPv6 option types.
Change-Id: Iad184f668626c3d1498b2ed00c7f1672e4abf52e
Reviewed-on: https://code.wireshark.org/review/16444
Reviewed-by: Guy Harris <guy@alum.mit.edu>
editcap -r only sets max_packet_number to the earliest, instead of latest,
packet or end of range selection. This changes it to the proper test.
Bug: 12547
Change-Id: I81772962b00fc6566ccead4fb44c6626a47fff31
Reviewed-on: https://code.wireshark.org/review/16045
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This doesn't try to use any data from multiple Name Resolution blocks, it
just converts single Name Resolution block usage into a GArray, so the
potential is there to then use/support multiple Name Resolution blocks
within a file format (like pcapng)
Change-Id: Ib0b584af0bd263f183bd6d31ba18275ab0577d0c
Reviewed-on: https://code.wireshark.org/review/15684
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This doesn't try to use any data from multiple Section Header blocks, it
just converts single Section Header block usage into a GArray, so the
potential is there to then use/support multiple Section Header blocks
within a file format (like pcapng)
Change-Id: I6ad1f7b8daf4b1ad7ba0eb1ecf2e170421505486
Reviewed-on: https://code.wireshark.org/review/15636
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Also add a length parameter to wtap_optionblock_set_option_string
Change-Id: I8c7bbc48aa96b5c2a91ab9a17980928d6894f1ee
Reviewed-on: https://code.wireshark.org/review/15505
Reviewed-by: Anthony Coddington <anthony.coddington@endace.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This allows keeping the code-sharing with the static linking.
This "fixes" a hypothetical ABI mismatch with wsutil and avoids pulling more
external dependencies to wsutil than strictly necessary.
A nice side-effect is that libwsutil no longer depends on version.h.
Follow up to f95976eefc.
Change-Id: I8f0d6a557ab3f7ce6f0e2c269124c89f29d6ad23
Reviewed-on: https://code.wireshark.org/review/15002
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Replace some function calls with their non-deprecated equivalents so
that we can remove _CRT_NONSTDC_NO_DEPRECATE from CMakeLists.txt and
config.nmake.
Leave _CRT_SECURE_NO_DEPRECATE in place. Removing it failed with 145
warnings and 72 errors.
Note that we could probably improve startup performance by using wmem
in diam_dict.*.
Change-Id: I6e130003de838aebedbdd1aa78c50de8a339ddcb
Reviewed-on: https://code.wireshark.org/review/14883
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I0950f61e90af5bb21c0017204de0c0b509616e5c
Reviewed-on: https://code.wireshark.org/review/14747
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The preceding code takes every effort to make sure that the
frac and end pointers are relevant pointers. Don't go back and
check for NULL yet again.
Change-Id: If805aee5a77a8c23eac7b074bd11d3743c5e1a3b
Reviewed-on: https://code.wireshark.org/review/14398
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The ethertype is 16 bits and big-endian, so fetch it with pntoh16() to
convert it to host byte order (and to handle unaligned values).
Fixes Coverity CID 1355352.
Change-Id: I14980e2813c3ea19c6df01681f8ed7aaad5c3f59
Reviewed-on: https://code.wireshark.org/review/14359
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This was inspired by https://code.wireshark.org/review/9729/, but takes it in a different direction where all options are put into an array, regardless of whether they are "standard" or "custom". It should be easier to add "custom" options in this design. Some, but not all blocks have been converted.
Descriptions of some of the block options have been moved from wtap.h to pcapng.h as it seems to be the one that implements the description of the blocks.
Also what could be added/refactored is registering block behavior.
Change-Id: I3dffa38f0bb088f98749a4f97a3b7655baa4aa6a
Reviewed-on: https://code.wireshark.org/review/13667
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add additional --novlan flag for removing vlan tag info before checking for duplicates.
When capturing with -i any you could see packets more than once and some drivers include vlan info.
With the --novlan the vlan info is removed from the packet so that checksum duplication detection can be used,
if the rest of the packets are the same.
Change-Id: I5dca6e20259a0a396875919e9e60cc42291579d3
Reviewed-on: https://code.wireshark.org/review/13414
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
If the seconds value in a time stamp is 0, that says nothing whatsoever
about whether it's supported or not - it's the presence flag, which
we've already tested and found to be set, that indicates whether the
time stamp is supported.
Bug: 12116
Change-Id: I91354783af7b6356d9806c7559d35da44ea4567f
Reviewed-on: https://code.wireshark.org/review/13913
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I3ec3c4723d29d84b25419982712707126351a01c
Reviewed-on: https://code.wireshark.org/review/13301
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also allow for range to include "the rest" (ex 10- would include all the packets starting at number 10)
Bug: 9686
Change-Id: Ib02e52b22acf49b0e52df0a75fa4fa0d5f37aa31
Reviewed-on: https://code.wireshark.org/review/13291
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug: 12007
Change-Id: Icd31988ebbfe1e0bf4d29f32462c58c6c2c55547
Reviewed-on: https://code.wireshark.org/review/13277
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The "-Wwrite-strings" flag produces nuisance warnings. These warnings are
not useful, they're impossible to fix in a sane way and therefore are being
handled with casts of static strings to (char *).
This just moves the warning to [-Wcast-qual] and a compiler pragma is
in turn required (and used) to squelch that warning.
Remove the Wwrite-strings warning. Let that responsibility fall on the
programmer (as is done by casting).
Change-Id: I5a44dfd9decd6d80797a521a3373593074962fb5
Reviewed-on: https://code.wireshark.org/review/12162
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Have a "this is stdout" flag for a wtap_dumper, and have "open the
standard output for dumping" routines that set that flag. When closing
a wtap_dumper, do most of the work regardless of whether we're writing
to the standard output or not (so that everything gets written out) and
only skip the closing of the underlying file descriptor.
Change-Id: I9f7e4d142b3bd598055d806b7ded1cb4c378de8e
Reviewed-on: https://code.wireshark.org/review/11673
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That's a UI convention, and the GUI shouldn't honor that convention - a
user might get confused if they try to save to "-" and end up with
nothing (and with a ton of crap in a log file if programs launched from
the GUI end up with their standard output and error logged).
While we're at it, make randcap report write and close errors.
Change-Id: I9c450f0ca0320ce4c36d13d209b56d72edb43012
Reviewed-on: https://code.wireshark.org/review/11666
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It ends up dragging in libwireshark headers, which programs not linking
with libwireshark shouldn't do. In particular, including
<epan/address.h> causes some functions that refer to libwireshark
functions to be defined if the compiler doesn't handle "static inline"
the way GCC does, and you end up requiring libwireshark even though you
shouldn't require it.
Move plurality() to wsutil/str_util.h, so that non-libwireshark code can
get it without include epan/packet.h. Fix includes as necessary.
Change-Id: Ie4819719da4c2b349f61445112aa419e99b977d3
Reviewed-on: https://code.wireshark.org/review/11545
Reviewed-by: Guy Harris <guy@alum.mit.edu>
According to checkAPI.
Change-Id: Iddad6253fc4711ed7870eccadb91d94e5fecd24d
Reviewed-on: https://code.wireshark.org/review/10672
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
That way, when we check for read errors, we don't run the risk of
thinking we have a read error after we get a write error.
Change-Id: Idb79822d30989b2529433878798c577a76eacca7
Reviewed-on: https://code.wireshark.org/review/10295
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This option skips some bytes when fuzzing, that prevents some headers from being changed. This focuses fuzzer to a smaller part of the packet.
Change-Id: I1db83235e93f2774a9991e3af70f633487b816fa
Reviewed-on: https://code.wireshark.org/review/9982
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make pcapng decode options in an NRB during read, and store the comment
option, and write it back out as well. Also make it handle plugin handlers
for unknown options in received NRB(s).
Change-Id: I81863ef8d85cb1c8b5ba6673ba0e562efe77714f
Reviewed-on: https://code.wireshark.org/review/9723
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Squelch
warning: cast discards ‘__attribute__((const))’ qualifier from pointer target type [-Wcast-qual]
similar to g630f54f.
Change strtod to g_ascii_strtod to squelch a checkAPIs error.
Change-Id: Ib2d26ef89f08827a5adc07e35eaf876cd7b8d14e
Reviewed-on: https://code.wireshark.org/review/7269
Reviewed-by: Gerald Combs <gerald@wireshark.org>
dladdr() takes a void * as a code pointer; have init_progfile_dir() do
so, and do the casting in the calls. We don't care about the signature
of the function whose address we're passing, we just want to pass a
pointer to *something* in the main program.
Change-Id: I9372620a97b0eb53c2bb3c0c41a238b4408f3709
Reviewed-on: https://code.wireshark.org/review/7270
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have them start the string with "Compiled" or "Running on", and return
the string when done.
Change-Id: Ic4d290c963621fa0385dc5aab766fd4ad31d3810
Reviewed-on: https://code.wireshark.org/review/6155
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We support three types of platforms:
1) UN*Xes that have both getopt() and getopt_long();
2) UN*Xes that have getopt() but not getopt_long();
3) Windows, which has neither.
Checking for getopt_long() lets us distinguish between 1) and 2) and
build getopt_long() for them.
Change-Id: Iaf0f142f9bebaa2eed2128d544ec9786711def45
Reviewed-on: https://code.wireshark.org/review/6045
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Guy Harris