There isn't anything "filter expression" specific about it and
there are a few other things that could take advantage of a
UatFrame.
Change-Id: I0d04d176caebf0c2d8043c3bf89a81668580eae8
Reviewed-on: https://code.wireshark.org/review/22570
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add a convenience function for the displayfilter combobox
and clean up some code. On Linux, the AltModifier does not work
as it is being used by xDMs to move the window around. Setting
it to Shift.
Change-Id: I1ee9638c1cf37f40dc21f19c4e0860adc4629d4e
Reviewed-on: https://code.wireshark.org/review/22529
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Allow the ordering of the filter buttons via drag/drop in
the toolbar
Change-Id: Id8793d6514bae36066a7a23d6890985665e753bd
Reviewed-on: https://code.wireshark.org/review/22422
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
taken from the timing analysis done in the wlan_radio dissector. QT only.
The timeline background is light gray, white for packets displayed in the packetlist,
and blue for the currently selected packet. Packets are coloured according to the
colouring rules foreground colour. The timeline can be zoomed with controls on the
toolbar.
At higher zoom levels the duration (NAV) field is plotted as a horizontal line to the
right of a packet.
The height of a packet in the timeline is proportional to the RSSI.
The bottom half of the packet is only shown if it matches the display filter.
Todo:
Auto detect TSF timing reference point (start/end of packet)
Add a scrollbar
Add a ruler showing time
Improve handling of focus.
Do not display NAV for packets with bad FCS.
Show related packets graphically
Different Y axis modes
- bandwidth/channel use display
- different transmitters per line
- background color from coloring rules
Live capture support
Change-Id: Ic31fffb0d6854966361ade7abb5c0be50db9a247
Reviewed-on: https://code.wireshark.org/review/20043
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
An extcap utility can provide configuration for controls to use in a
GUI interface toolbar. This controls are bidirectional and can be
used to control the extcap utility while capturing.
This is useful in scenarios where configuration can be done based on
findings in the capture process, setting temporary values or give other
inputs without restarting current capture.
Todo:
- Add support for Windows
Change-Id: Ie15fa67f92eb27d8b73df6bb36f66b9a7d81932d
Reviewed-on: https://code.wireshark.org/review/19982
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
When a capture file is reloaded, the information stored in
VoipCallsInfoModel is invalidated. Add another cache layer to fix this:
VoipCallsInfoModel wraps around raw data (invalid on close)
CacheProxyModel NEW: use prev. data or cache on close
VoipCallsInfoSortedModel provided sorting, etc.
VoipCallsDialog actual user of model (callTreeView)
This also fixes a UAF after a file was closed, and when a call is
selected (that got worse with the last model/view patch and is "fixed"
in this patch with the caching layer. Note that the Flow sequence and
Play Streams dialog are not that useful when the file is closed).
Change-Id: Ib4daff9dc01a54863fe1d943bdbdb876418924ee
Reviewed-on: https://code.wireshark.org/review/20574
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Functional improvements:
- "Time of day" option is now propagated to the CSV/YAML export.
- The sorting order is preserved in the CSV/YAML export.
Other changes:
- Convert column name identifiers to enum.
- CSV output will now always be quoted (previously numbers like packet
count were not quoted, but since CSV has no numeric type it should
be OK to add quotes). Side-effect of model design decision.
- Instead of clearing the widgets and re-adding all calls, now it will
add new calls to the model. Not tested with a live capture, if the
column data can change, maybe a dataChanged signal is needed.
Due to this patch, it should be easier to add a filter for finding calls
easier (e.g. by From, IP, etc.).
Note: extra QList is used in the model to ensure a O(1) lookup of calls
(rather than O(n) for GQueue).
Change-Id: Ie08462aae038d9c3daf1cc7a152b948724689017
Reviewed-on: https://code.wireshark.org/review/20084
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Creates an interface for plugins and other parts of the code, to
add a new toolbar to the system and have various widget types interact
with this toolbar.
All toolbars added via this interface, will be added to an additional
submenu called "Additional Toolbars" within Wireshark.
Also a demo plugin is being provided, demonstrating various features
of the toolbar, including updating the gui elements. It also demonstrates
how to update toolbar items.
Change-Id: I8d0351224b3d7f4b90220d58970b51695551d7e3
Reviewed-on: https://code.wireshark.org/review/19803
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Implement the custom cmake calls analog to the gtk version
Change-Id: I426d2a2df5a4bfb6fc385b970e3944415d3c8afd
Reviewed-on: https://code.wireshark.org/review/19563
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
A new "--export-object <protocol>,<destdir>" option is added to tshark.
This required refactoring Export Object behavior in all GUIs to give the
export object handling to the dissector, rather than the ui layer.
Included in the refactoring was fixing some serious memory leaks in Qt
Export Object dialog, crash due to memory scope issues in GTK Export
Object dialog, and addition sorting column feature in Qt dialog (set
up by creating a widget to manage the items that were previously
leaking memory)
Bug: 9319
Ping-Bug: 13174
Change-Id: I515d7662fa1f150f672b1476716f347ec27deb9b
Reviewed-on: https://code.wireshark.org/review/18927
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This moves the handling of pipes to the new InterfaceTreeModel as well.
It also includes a new PathChooserDelegate and cache handling for adding
data to an interface list without putting it into storage
Change-Id: Id255a81161b4da517e26127abe8ea7f5eb36d55a
Reviewed-on: https://code.wireshark.org/review/18497
Reviewed-by: Roland Knall <rknall@gmail.com>
In preparation for moving to the new interface list, adding all
necessary editors and changes to allow all columns, which are being
handled by CaptureInterfacesDialog or ManageInterfacesDialog to be
edited correctly
Change-Id: I8bfabff92a07950c74a4d7243dadd99ecd2024f4
Reviewed-on: https://code.wireshark.org/review/18446
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Make the texts "Open" and "Capture" clickable, and have them open
the FileOpen and CaptureOptions dialogs respectively
Change-Id: I2a3efbc4cdf160aa0b4efc6496d09228affbff46
Reviewed-on: https://code.wireshark.org/review/18303
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Implement the same interface view/data model as used for
the interface_tree selection in this dialog, to encapsulate
all access to global_capture_devices from the dialog.
Change-Id: I0e568fe236d077befa2a79765638db8bb3ed1a3f
Reviewed-on: https://code.wireshark.org/review/18062
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Fixes:
- Fix crash (heap-use-after-free) on removing a record while editing.
- Mark a record as invalid if any of the fields fail the validation.
(Fixes crash in at least the ISAKMP dissector.)
- Prevent saving of invalid UAT entries (e.g. empty UATs).
- Do not close the dialog on pressing Enter/Escape while editing,
close the editor instead.
- Fix HTML injection in the error messages.
Improvements:
- Tab-navigation now works between fields.
- The field editor is now closed once the focus is lost.
- Fields that fail validation are marked (currently with a pink color).
- The error hint selection has become smarter (see comments in
UatDialog::checkForErrorHint).
- Properly recognizes PT_TXTMOD_HEXBYTES formats like "aa:bb"
(previously it would not expect the ":" and report a bad length).
A validator prevents invalid strings from being entered.
- The OK button is disabled when new/edited records are bad. Notably,
existing (possibly invalid) records are skipped. (Bug 7471).
Live validation (while typing in the editor) was dropped during
conversion, but it can be added later if desired.
Drag and drop reordering still needs to be implemented.
Bug: 11714
Bug: 7471
Change-Id: Ic0b6a177f90503fbd65b5001d8a87a10e38f4d64
Reviewed-on: https://code.wireshark.org/review/17994
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This changes the underlying model of the main interface tree.
Because of that, we can resort to a view/model approach, enlisting
the global interfaces list as only data source.
The interface list works identical to the old list, but allows
for filtering of the displayed interfaces by type. Only types, which
are present and whose interfaces are not hidden, are being displayed
for selection.
Change-Id: If8475b227daa026dc0ad3d25bc7fe050d5bf2ac3
Reviewed-on: https://code.wireshark.org/review/17940
Reviewed-by: Roland Knall <rknall@gmail.com>
Instead of checking for the boolean "FALSE", just set an empty string.
This avoids the need to check for WERROR_COMMON_FLAGS before using it.
The transformation is the same for all files, remove
"if (WERROR_COMMON_FLAGS)" and "endif()", reindent and add quotes (since
we have a string here and not a list).
Modelines have been added where missing.
Change-Id: I0ab05ae507c51fa77336d49a99a226399cc81b92
Reviewed-on: https://code.wireshark.org/review/17997
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Dario Lombardo <lomato@gmail.com>
Add a timeline indicator to the Start and Duration columns in the
Conversations dialog. Add tooltips to the columns that explain what's
going on.
Round the timeline rect corners and do the same for Prototocol Hierarchy
Statistics. This should hopefully differentiate the graph bars from a
text selection and IMHO it looks better.
Update the PHS and Conversations images in the User's Guide.
Change-Id: I61d6c25843be522cc444e01ba77cb5b1e991fa36
Reviewed-on: https://code.wireshark.org/review/17396
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Setting our compiler warning flags in CMAKE_C_FLAGS does not allow
using different flags per target.
Allow for that possibility by setting the internal WS_WARNINGS_{C,CXX}_FLAGS
and using the COMPILE_OPTIONS property to set them.
This change is just setting mechanism and there should be no difference
in generated warnings.
The check_X_compiler_flag cmake test is changed to test each flag individually.
We need a list, not a space separated string, and the aggregate test is not
significant.
Change-Id: I59fc5cd7e130c7a5e001c598e3df3e13f83a6a25
Reviewed-on: https://code.wireshark.org/review/17150
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Change-Id: Ia2ee723227e1b331eeec0f0463654f35a4c9f37b
Reviewed-on: https://code.wireshark.org/review/14508
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Device dialog appears when user double clicks on device in
Devices dialog (Bluetooth->Devices). It provides
summary of device, like BD_ADDR, name, timeouts, etc.
Base on information from HCI layer, so this feature is more interesting
for local devices (capturing on its side). Each field has changes counter,
what mean that value at specified field changes in time, for example:
user change device name 3 times. Please note that initial change
is not counted. It means that you can see fielkd without any value
then change occur and counter is not increased. It will be increased
next time. Reason for that is in most cases field value is unknown
at start.
Change-Id: Ife0a6bd454eac00a28f8eb2906e1b395695b0307
Reviewed-on: https://code.wireshark.org/review/15793
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Add the Firewall ACL Rules dialog. Try showing all valid rules for a
given product instead of making the user select from a combobox. We can
add the combo back easily enough if that's desired.
Add a rule hint field and use it in the Qt and GTK+ UIs.
Bug: 12469
Change-Id: I39dd840e9838f96d7c5e2b4c34662811c21d0386
Reviewed-on: https://code.wireshark.org/review/15689
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
DisplayFilterEdit deals with entire filters and some edit boxes just need a
single protocol field. This control will do the trick.
Bug: 12321
Change-Id: I8e5837ea9a6955ada29b7e516ea022ab1dd46f0d
Reviewed-on: https://code.wireshark.org/review/15595
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add a ConversationAction and ColorizeAction classes which respectively
handle conversation filtering and colorization.
Move conversation menu initialization to initConversationMenus and call
it once at startup. This keeps us from leaking quite a bit of memory
each time we select a packet or proto tree item.
Bug: 12044
Change-Id: I32e8cedaba08a419d5da6a7a9db31c910909f450
Reviewed-on: https://code.wireshark.org/review/14516
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add GeometryStateDialog class to handle load and save dialog geometry.
The QDialog class name will be used as window name. For shared
classes the UAT name or the statistics title or abbr will be used.
Change-Id: I5a019598307fb3861518f41e733de834788184d8
Reviewed-on: https://code.wireshark.org/review/14139
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add settings to the QLineEdit context menu to use textual or regular
expression search. Use this in Follow Stream and Show Packet Bytes.
Change-Id: I3a9f5a923f616629aa40a334921871f98b518f30
Reviewed-on: https://code.wireshark.org/review/13942
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Show selected packet bytes as ASCII, HTML, Image, ISO 8859-1, Raw or UTF-8.
Images supported are what's supported by QImage, and HTML supported
is what's supported by QTextEdit.
Change-Id: I96fc5c5d222c5389078576463cf78d82cf55528d
Reviewed-on: https://code.wireshark.org/review/13807
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
An option may now use the "required=true" argument (see sshdump.c)
which will ensure, that the capture can only be started via the
dialog, if the option has been provided. To ensure, that this is
working properly, multiselect has been moved to a separate source
file.
Renamed one method so it may not interfere with a future save
functionality, and cleaned up the interface to use only default
buttons and roles
ONLY the Qt interface is being supported.
Change-Id: Ie1c9a63c1bba2e557d55b1de6f4775d8b9fce515
Reviewed-on: https://code.wireshark.org/review/12912
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a "+" icon to the display filter toolbar which allows the addition
of a new filter expression button. (Hopefully this will be the last main
window UI change before 2.0.)
Change-Id: I52bf56bf699dddb7b387b9f4de1bf8b35eb3c4ce
Reviewed-on: https://code.wireshark.org/review/11375
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add "/WX" to the Visual C++ compiler flags if DISABLE_WERROR is off,
similar to config.nmake.
We haven't compiled C++ code with -Wshorten-64-to-32 for quite
some time so there's no need to add -Wno-shorten-64-to-32 in
ui/qt/CMakeLists.txt.
Additionally, squelch
----
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3050) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3065) : see reference to function template instantiation 'void std::_Median<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3127) : see reference to function template instantiation 'std::pair<_RanIt,_RanIt> std::_Unguarded_partition<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3157) : see reference to function template instantiation 'void std::_Sort<_Iter,int,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Diff,_Pr)' being compiled
with
[
_Iter=QList<QString>::iterator
, _RanIt=QList<QString>::iterator
, _Diff=int
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
.\rpc_service_response_time_dialog.cpp(130) : see reference to function template instantiation 'void std::sort<QList<QString>::iterator,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3051) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3052) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3053) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
----
in both rpc_service_response_time_dialog.cpp and wireshark_application.cpp
so that we'll compile successfully.
Change-Id: I457bcede99dcb1f3c1001f1f559c4901bb000357
Reviewed-on: https://code.wireshark.org/review/10533
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Use QToolButtons to display the expert indicator and comment icons in
the main status bar. Use the same style sheet hack we use in
ProgressFrame to un-style the buttons.
Make sure we specify the @2x comment icon in our .qrc file so that it's
loaded and used on retina displays. Move the comment and expert .pngs to
the stock icon directory and use StockIcon to load them. Remove
status.qrc since it's no longer used.
Change-Id: I84485b22656f8f9af29ad3c02446ffefb6657ed5
Reviewed-on: https://code.wireshark.org/review/11048
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Note the "initial". This is woefully incomplete. See the "to do" lists
below and in the code.
This differs a bit from the GTK+ version in that you specify one or more
streams to be decoded.
Instead of showing waveforms in individual widgets, add them all to a
single QCustomPlot. This conserves screen real estate and lets us more
easily take advantage of the QCP API. It also looks better IMHO.
Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We
probably won't use the widgets until we make 5.0 our minimum Qt
version and plain old QtMultimedia lets us support Qt 4 more easily
(in theory at least).
Add resampling code from libspeex. I initially used this to resample
each packet to match the preferred rate of our output device, but this
resulted in poorer audio quality than expected. Leave it in and use to
create visual samples for QCP and to match rates any time the rate
changes. The latter is currently untested.
Add some debugging macros.
Note that both the RTP player and RTP analysis dialogs decode audio data
using different code.
Note that voip_calls_packet and voip_calls_init_tap appear to be dead
code.
To do:
- Add silence frames where needed.
- Implement the jitter buffer.
- Implement the playback timing controls.
- Tapping / scanning streams might be too slow.
Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4
Bug: 9007
Reviewed-on: https://code.wireshark.org/review/10458
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The GTK+ version dumps "new" and "old" hash values. It looks like
neither are valid since the code in conversation.c and
conversation_hashtables_dlg.c have diverged.
For now just dump the addresses and ports for each hash table in the Qt
UI.
Change-Id: I832522dff06da769bd4ad3ead3d541206f283a90
Reviewed-on: https://code.wireshark.org/review/10713
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the "Internals" menu under the View menu instead of at the top level
for now at least. Add the Dissector Tables dialog there.
Change-Id: Ieb23b0015591bac196e4ef94e3443832288333f9
Reviewed-on: https://code.wireshark.org/review/10654
Reviewed-by: Gerald Combs <gerald@wireshark.org>
A recent set of changes replaced the "dfilter_erase_" images with an
"x-filter-clear" stock icon set.
Move StockIconToolButton to its own compilation unit. Use it in
CaptureFilterEdit and ProgressFrame to load the "x-filter-clear" icon.
Bug: 11516
Change-Id: I5d5864d089fb56827d130d493d53e7de6a7c03b5
Reviewed-on: https://code.wireshark.org/review/10475
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Copied from the RTP Analysis dialog, just like the GTK+ version.
Change-Id: I111020bc4073a3a3ba583bdace51a91ee5fef300
Reviewed-on: https://code.wireshark.org/review/10447
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Have the bookmark button operate on saved display filters, similar to
the "Filter:" button in the GTK+ UI. Expose the saved display filter
list via a popup menu.
Update the display filter icons. Make the "Apply" button wider. Remove
the old icon assets.
Add a StockIconToolButton class along with note explaining why it's
necessary.
Rename the "Filter Bookmarks" preference to "Filter Shortcuts".
Suggestion for a better name are welcome.
Change-Id: I0082d3f01b017253fa75e51cbff9beb17c41a209
Reviewed-on: https://code.wireshark.org/review/10390
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Convert both the MTP3 statistics and summary. As with the GSM stats this
is mostly untested.
Change-Id: I7af8d5f21c8161dc95f7f2c710f32364b6f6a431
Reviewed-on: https://code.wireshark.org/review/10338
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Instead of splitting the stats into two lists as with the GTK+ UI, add
everything to an expandable tree. This allows viewing nodes on more than
one network.
Rename the top-level Bluetooth menu item to Wireless and put the WLAN
stats dialog there.
The Qt UI matches SSIDs (WlanNetworkTreeWidgetItem::isMatch) a bit
differently than the GTK+ UI. Try to make the logic as plain as possible
since we'll likely have to update it in the future.
The addition of a custom BSSID address types means that we can't assume
that everything is AT_ETHER. Add routines for checking for broadcast
BSSIDs and comparing only the data portions of addresses.
Move PercentBarDelegate into its own module. Use it in
WlanStatisticsDialog.
Change-Id: Ie4214eb00671a890871380c4a07213ebfb7585c6
Reviewed-on: https://code.wireshark.org/review/10171
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the UDP multicast stream dialog. Abuse TapParameterDialog a bit more
so that we can edit parameters.
Remove some unused struct members and an unused function.
Change-Id: I962c70344e792f0959527e4bcba8a20bd7e8acf9
Reviewed-on: https://code.wireshark.org/review/10084
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make sure we run make-tap-reg.py on files that register tap
listeners. Make sure Qt-specific registration routines start with
register_tap_listener_qt_.
Change-Id: Idca382180f475db71e4d1965a70ae4cc2fa4f9d5
Reviewed-on: https://code.wireshark.org/review/10074
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add RpcServiceResponseTimeDialog, which handles DCE-RPC and ONC-RPC
service response time statistics. Try to make it as lightweight as
possible, since we might want to pull this into the RPC dissectors
similar to the other SRT statistics.
Allow program names on the command line in place of numbers or UUIDs. Make
matches case-insensitive. E.g. the following are equivalent:
-z rpc,srt,100003,3
-z rpc,srt,nfs,3
-z rpc,srt,NFS,3
as are the following:
-z dcerpc,srt,f5cc5a18-4264-101a-8c59-08002b2f8426,56
-z dcerpc,srt,nspi,56
-z dcerpc,srt,NSPI,56
Change-Id: Ie451c64bf6fbc776f27d81e3bc248435c5cbc9e4
Reviewed-on: https://code.wireshark.org/review/9981
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Convert both the MAP statistics and summary. As with the GSM A stats
this are mostly untested.
Change-Id: Ibd3a7346b09d1401e78724c0197ec2a38deb97a3
Reviewed-on: https://code.wireshark.org/review/9883
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This dialog combines the "protocols" and heuristic dissectors (from GTK) into a single tree view where heuristic dissectors are children of their protocol.
Change-Id: I107656afd079c1d1c8a98161b736e4b4ad84f813
Reviewed-on: https://code.wireshark.org/review/9739
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make it an editor frame instead of a dialog similar to the column editor
and prototocol preference editor.
Change-Id: If1a0cdf02dcab0eca98e8d39c94a3c2fe236df5a
Reviewed-on: https://code.wireshark.org/review/9743
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Rename CaptureFileProgressFrame to ProgressFrame. It's not limited to
capture files. Add "busy" routines there and in MainStatusBar. Show a
busy indicator while sorting columns.
Use toByteArray().constData instead of .data. I'm not sure if it matters
in our case but it's more correct.
Change-Id: Ibe35fee9b9dd3fabb5ff8ddcc21f6bf59dec4af6
Reviewed-on: https://code.wireshark.org/review/9720
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
HCI Summary dialogue collect HCI Opcodes, HCI Events, Hardware Errors,
Statuses and Reasons. Also show occurrence of them. The top level item
is group of items (by OGF or types), the second level item is in real
command, event, hardware error, status or reason. The third level items
are direct link to packet that contains second level item type.
Change-Id: I6b6bd02533c4605a2dd2c1f5dfee46f72a0f3fdc
Reviewed-on: https://code.wireshark.org/review/9676
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Inspired by (but not as fancy as) Packet Fence, an enhancement written
for Ethereal a loooong time ago by Martin Visser:
https://www.wireshark.org/lists/ethereal-dev/200011/msg00122.html
Several text editors call this a "minimap".
Color each scrollbar raster line to match the color of up to 7 packets.
Note in the comments why this number was chosen.
If we have any flagged frames (marked, ignored, time ref) indicate them
on either side of the scrolbar.
Handle HiDPI (retina) displays. This means that your window size depends
on the height of your scrollbar *and* your monitor resolution.
Qt's idea of the slider rect doesn't match up with the slider on OS X.
This might be local to my build -- I can replicate it Qt Creator.
Change-Id: Ia089d2d766ce37bab11e22d1a5721b4908935304
Reviewed-on: https://code.wireshark.org/review/8982
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
Combine the GTK+ RTP Stream Analysis and RTP Graph Analysis dialogs into
one. Yell at the user less. Disable the Analyze RTP Stream menu item if
we don't have an RTP stream selected.
There are a *lot* of moving parts in this dialog. I've tested with the
few RTP captures I have but it's by no means complete.
"To do" items are listed at the top of rtp_analysis.cpp.
Change-Id: Id503977f069bebc46cc68bc749f0c9cbf4d37bf6
Reviewed-on: https://code.wireshark.org/review/9650
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The GTK+ equivalent is named "Address Resolution" but "Resolved
Addresses" seemed (to me at least) to be more clear.
Change-Id: I1806354d91bb5ce8af11d20568b92a04c78d4d73
Reviewed-on: https://code.wireshark.org/review/9580
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a FunnelStatistics class, which is the main interface between the Qt
UI and the Funnel API.
Add FunnelTextDialog, which implements the text_window, ProgDlg, menu,
and other routines. Add FunnelStringDialog, which implements dlg_new.
We currently only support "Tools" menu items (MENU_TOOLS_UNSORTED, aka
REGISTER_TOOLS_GROUP_UNSORTED). Add a disabled placeholder to the
"Tools" menu in case we don't load any scripts.
Use "struct progdlg" instead of needlessly casting to
funnel_progress_window_t.
To do:
- Add support for MENU_STAT_UNSORTED, MENU_STAT_GENERIC, etc.
- Make the firewall config generator a Lua script?
- Add FunnelGraphDialog? It seems like it would be useful to
make QCustomPlot accessible to Lua scripts.
Ping-Bug: 9845
Change-Id: Iefff02e9032ed1853666f7902509ed08b431e7a7
Reviewed-on: https://code.wireshark.org/review/9523
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add ServiceResponseTimeDialog as a subclass of TapParameterDialog,
similar to StatsTreeDialog. Add initial plumbing for statistics menu
items and command line invocation.
Don't append "..." to menu item names. Don't add menu icons. In each
case this avoids repetitive UI clutter.
Change-Id: I463b95c93090160bb81d2e80b16aad389dc0bd6c
Reviewed-on: https://code.wireshark.org/review/8864
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
this should prevent Visual Studio from picking up generated include
files which may be lying around in the source tree (as leftovers from
previous in-tree builds)
Change-Id: I2406c31bc0638eb13ed4b539ddc607512051033d
Reviewed-on: https://code.wireshark.org/review/9130
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Switch from a plain QProgressBar to a QFrame with a QProgressBar and a
stop button.
Add a stop_flag boolean to the capture_file struct.
To do:
- Start adding the progress bar to dialogs.
- Don't complain so loudly when the user stops a capture.
Change-Id: Iedd1d7d79f2044f1a53e4fb22186d25930a3ef03
Reviewed-on: https://code.wireshark.org/review/9029
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This replaces the single preference editor dialog in the GTK+ UI.
Change-Id: I10e030981e9f7d1ec121811593586b65cf0797c5
Reviewed-on: https://code.wireshark.org/review/8966
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add protocol preferences in the packet list and packet detail context
menus. Note that we need a PreferencesEditorFrame in the main window for
editing numeric and string preferences. For now we just show the prefs
dialog.
Change-Id: Ice0cc8e9bc25963cc14aa47698f042f2a73088d8
Reviewed-on: https://code.wireshark.org/review/8957
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the wireless toolbar to the Qt UI.
Start adding AirPcap support to ui/80211_utils. Add FCS validation
routines to ws80211_utils.
Move a bunch of AirPcap routines that require epan from caputils to
ui/gtk. They were required for driver key management, which we'll
leave to the AirPcap Control Panel in the Qt UI.
Move frequency-utils to wsutil.
Change-Id: I44446758046621d183f5c2ba9f6526bf01e084f1
Reviewed-on: https://code.wireshark.org/review/8910
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Please found it under Bluetooth menu. It shows all devices found
in logs, not only connected, all that its address can be found in
logs. Show if device is local (in most cases: capturing on it side)
and manufacturer and LMP version what should answer the question what
version of Bluetooth is used by Bluetooth device chip.
Also firmware version.
Change-Id: I32e3b7100cdebcaa850b6541de0ab89dff41c0e1
Reviewed-on: https://code.wireshark.org/review/8901
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Split StatsTreeDialog into StatsTreeDialog and TapParameterDialog (its
base class). This more closely matches the GTK+ UI and paves the way for
more statistics dialogs.
Change-Id: I2630385534e829d99724673ade372fcb33200d07
Reviewed-on: https://code.wireshark.org/review/8842
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Use a single overloaded dialog, similar to the GTK+ UI.
Change-Id: If85db14a7101770f115bef725f5145e0010c518d
Reviewed-on: https://code.wireshark.org/review/8776
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Changes from the GTK+ UI:
- The display filter is built on the fly with immediate syntax feedback.
- Slightly different layout.
- You can search for fields.
Make the plain SyntaxLineEdit a bit more plain.
Bug: 11128
Change-Id: I06a48cd7b9ba7b9dc193b0199540aede4eb62fa7
Reviewed-on: https://code.wireshark.org/review/8742
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Show all expert messages in a combined view. Group top-level items by a
(severity, group, protocol) tuple.
Let the user enable and disable messages via a check menu.
Add ProtoTree::goToField and expert_info_t.hf_index. Use them to jump to
what we hope is the afflicted item.
Enable the context menu only if the user has selected a packet item.
Add a free-form search field that matches expert summaries.
This differs from the GTK+ version but hopefully provides a smoother
workflow.
Bug: 10931
Change-Id: Ia12cb7c27cdea1634fa2798fb7e4c1b23bd16ad2
Reviewed-on: https://code.wireshark.org/review/8294
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Implementing a button in the interface list, to bring up
the extcap options dialog, as well as a dialog, which will
be generated depending on the selected extcap options.
Change-Id: I1733dc6a8c1a121089a9c353aff10bc4a53e86de
Reviewed-on: https://code.wireshark.org/review/8224
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Add the ability to set frame number types: none, request, or response.
Use the types to draw different related packet indicators in the packet
list.
Track the conversation in PacketListRecord. Use it to draw dashed lines
for unrelated frames.
Set frame number types for DNS and ICMP.
Instead of drawing a transparent QImage, alpha blend our foreground
color and draw directly in our painter. Blend more toward the foreground
color.
Add FRAMENUM_TYPE to checkAPIs.
Change-Id: I2495945bb436413e05d6ec697184a0b4fd5ad214
Reviewed-on: https://code.wireshark.org/review/7436
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We don't want to encourage people to add to those lists, we want to
encourage people to subtract *from* those lists (either by fixing
warnings or, if an infelicitous API, or an infelicitous declaration of
an API on some platforms, or a program generator that doesn't take
sufficient care to avoid warnings - I'm looking at *you*, Flex - makes
it impossible to fix without introducing other problems, using the
DIAG_OFF()/DIAG_ON() macros if possible). Eliminate the empty lists, to
make it harder to fill them up again.
Change-Id: I298d07952c0cb1842a4ea71ba7e07c68e94a04e9
Reviewed-on: https://code.wireshark.org/review/7229
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Allow persistence across files. Preserve the use of "window" even
though we're really a dialog.
Update ByteViewTab and ProtoTree to support multiple instances.
Remove the need for a cast in frame_data.
Add more forward declarations.
Change-Id: I50d3d9d1455b8ecc158a37218f9e41fe696d5ae2
Reviewed-on: https://code.wireshark.org/review/7086
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
It is a GUI+QT feature that introduce Bluetooth menu and
"ATT Server Attributes" that present all handle+UUID pairs
as table. User may copy cell value, row, selected rows or whole
table within header. On activate user will go to packet that
introduce UUID for specified handle.
Change-Id: If17e53aff5feb89ededc740a595ba5882b90be5e
Reviewed-on: https://code.wireshark.org/review/6911
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Merge in the old ColorDialog which was a placeholder for
color_filter_add_cb.
Change-Id: I48d188509f480b8514122b4011ac9d8790fcca10
Reviewed-on: https://code.wireshark.org/review/6996
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add keyboard shortcuts. Note that not all of the buttons made it from
GTK+. Add a "Go to setup frame" option.
Move rtp_streams.c from ui/gtk to ui.
Add a help URL for RTP analysis (which needs to be split into streams +
analysis).
Fix RTP stream packet marking.
Change-Id: Ifb8192ff701a933422509233d76461a46e459f4f
Reviewed-on: https://code.wireshark.org/review/6852
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Don't carry over the sort items from the GTK+ UI (for now, at least).
Update some names. Add a column editor frame similar to the "Go to
Packet" and "Search" frames.
Change-Id: I1bd3834a26994de96894d2b7512bce2c19915c77
Reviewed-on: https://code.wireshark.org/review/6277
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add WiresharkDialog, a common base class for dialogs centered around
capture files. Make it a parent of Capture File Properties, Traffic
Table, Conversations, and Endpoints.
Rename CaptureFile::read_only_ to file_closed_. Add methods to
WiresharkApplication for generating consistent window titles.
Change-Id: Idc771556d8192e60f85dddc08fc4757698dee257
Reviewed-on: https://code.wireshark.org/review/6097
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Wrap the capture_file struct in a QObject which translates cf_cb_* and
capture_cb_* events into signals. Move the global cfile to
capture_file.cpp.
Don't use a void pointer for the capture file struct.
Change-Id: Ic5d5efb4bb1db64aa0247245890e5669b1da723a
Reviewed-on: https://code.wireshark.org/review/5885
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add Telephony menu items for VoIP Calls and SIP Flows. Put VoIP Calls at
the top, since that seems to be the primary item.
Add configure-time checks for QtMultimediaWidgets in anticipation of
adding a VoIP playback dialog.
Add an icon for the playback button. (Yes, I've been avoiding
GNOME-level gratuitous icons so far but this is one of the rare
occiasions where it makes sense.)
Add a help link define for the VoIP calls dialog.
Change-Id: I5d0799685c598ad9af76fe9667f8ea7d14b66050
Reviewed-on: https://code.wireshark.org/review/5674
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Go back to a single view similar to the GTK+ UI. Apply layouts using Qt
Designer.
Rename the menu item and class to "Capture File Properties". It's not
really a summary if it contains details such as "marked average bits
per second". We might want to move this to a "Properties" item under
the "File" menu similar to other applications.
Add the GTK+ summary icon (for now) to the toolbar and open the
properties dialog on clicking.
Singleton dialogs delenda est[1]. Let the user open as many summaries on
as many capture files as he or she wishes. Also, global cfile delenda
est[2].
Don't blindly include QtGui. Add specific components instead.
Use consistent method names, variable names, and patterns. Try to
document what "consistent" means.
Adjust the way we display some statistics to match the summary bar, e.g.
displayed = captured if we don't have a filter applied.
[1] Not really.
[2] Yes, really.
Change-Id: I11793b1d79dd0c3f70414ac8592b86181da59916
Reviewed-on: https://code.wireshark.org/review/5274
Reviewed-by: Gerald Combs <gerald@wireshark.org>
- get language as soon as possible (before creating any Qt objects) to make all
translations working
- dynamic list of supported languages
- runtime change of GUI language (no need to restart application)
- add flags icons support
- search for *.qm languages in buildin resources, then
data dir called "languages" (main directory in sources or
/usr/share/wireshark/languages), then user directory
(UNIX: ~/.wireshark/languages); "languages" directory should contains
files wireshark_xx.qm where xx is language code (en, en_GB, etc.),
and optional xx.svg for flag icon
- try to fix some untranslated manually-created UI items
(need manual reset text of those components)
Change-Id: I62ca8a8cddce47cec9dbcad6b0bd68b6cfd92229
Reviewed-on: https://code.wireshark.org/review/5041
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Rename simple_dialog_qt.{cpp,h} to simple_dialog.{cpp,h}. Make it a
subclass of QMessageBox. Queue messages at startup similar to GTK+.
Move the GTK+-specific simple_dialog declarations to
gtk/simple_dialog.h.
Don't yell at the user so much. Replace exclamation points with periods.
Change-Id: I1cc771106222d5e06f1f52d67ac29d6dc367cce4
Reviewed-on: https://code.wireshark.org/review/4288
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Set the main window icon to the "wsiconcap" version while we're capturing
similar to the GTK+ version. Verified on Windows. Not sure if this will
do anything on other platforms.
Change-Id: I9b082601a2c47e5f52cc38ac8d9b4d9f5fb9a4d9
Reviewed-on: https://code.wireshark.org/review/4230
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
In my version of XCode ranlib complains bitterly and returns an error if
a module has no symbols. Make the AirPcap, RTP player, and remote
capture code conditional. We could also try passing
"-no_warning_for_no_symbols" to ranlib but we probably shouldn't try to
comple the code in the first place.
Change-Id: Ide4f3d649eac354d54f0dde27dbc8e9cb270c65f
Reviewed-on: https://code.wireshark.org/review/4220
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
The new icons are patterned after the existing capture icons. They could
probably benefit from some adjustments here and there.
Start moving toward icon names and a directory layout compliant with
freedesktop.org's Icon Naming Specification and Icon Theme
Specification. We aren't fully compliant and might never be but anyone
with exposure to FDO icon themes should at least know where everything
is.
Make Capture Start (x-capture-start) the first icon in the toolbar.
Define the Colorize Packets, Auto Scroll, and zoom icons even though the
Qt UI doesn't use them yet.
Leave the Capture Filter, Display Filter, Coloring Rules, Preferences,
and Help icons off for now. The GTK+ toolbar is overly cluttered and I'm
not sure they're necessary.
Try not to break ui/gtk/toolbar_icons.h.
Remove welcome.qrc. I initially added it in case we needed to overlay
the welcome screen with translucent .pngs but that never happened.
To do:
- Move the old GTK+ icons to their own directory.
- Find a better name for the "toolbar" directory. "stock"?
- Make the toolbar configurable.
Change-Id: Ie07592113d307b8db786aedace672312a870fe38
Reviewed-on: https://code.wireshark.org/review/4182
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Create a TrafficTableDialog (for lack of a better name) parent class
from the general parts of ConversationDialog. Use it to create
EndpointsDialog.
Move the contents of conversation_tree_widget.{cpp,h} to
conversation_dialog.{cpp,h} to match endpoint_dialog and
traffic_table_dialog.
Fill in GeoIP columns dynamically instead of using a hard-coded limit.
Use "endp_" and "ENDP_" prefixes for a lot of endpoint variables and
defines.
Try to make geoip_db_lookup_ipv4 and geoip_db_lookup_ipv6 more robust.
Clean up some includes. Fix a shadowed variable.
Change-Id: I23054816ac7f8c6edb3b1f01c8536db37ba4122d
Reviewed-on: https://code.wireshark.org/review/3462
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make sure the Qt UI is named "Wireshark" and its executable is named
"wireshark" or "wireshark.exe". Make sure the GTK+ UI is named
"Wireshark 1" or "Wireshark (GTK+)" depending on how much the target
audience is likely to care about UI toolkits. Make sure the GTK+
executable is named "wireshark-gtk" or "wireshark-gtk.exe".
It looks like moving to Qt 5.3 (g978faf3) broke the PortableApps
package. It's likely even more broken now.
Autotools out-of-tree builds also broke on Ubuntu 12.02 (automake
1.11.3) at some point. The first attempt to compile in ui/qt returns
"error: source_file.cpp: No such file or directory". The second attempt
works. Out-of-tree builds work fine on Ubuntu 14.04 (automake 1.14.1).
Tested:
- Nmake builds
- NSIS packaging
- CMake builds (Windows, OS X)
- Autotools build and distcheck
- RPM packaging
To do:
- Test Debian packaging
- Fix PortableApps
Change-Id: I66429870e05fd2d6fc901942477959ed6164fce2
Reviewed-on: https://code.wireshark.org/review/3919
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add remote interfaces to capture from a remote host.
Change-Id: I34e31d865304f3c6dd972ab9ab1c23829d564665
Reviewed-on: https://code.wireshark.org/review/3405
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Items are sorted by value.
Move common conversation code to ui/conversation_hash.[ch]. Add a
conversation_type_e enum along with convenience functions for fetching
titles, tap names, etc.
We have a single main dialog instead of a main dialog + individual
protocol dialogs. It de-clutters the statistics menu and results in
simpler code. Conversation type tabs can be added and removed within the
dialog itself. The tab list is sticky and saved with the current profile
when the dialog closes. Data can be copied as CSV or YAML.
Add a FilterAction class and a corresponding filterAction slot to
MainWindow. Use it for the Conversations context menu.
Add an addressResolutionChanged signal and related plumbing.
Get rid of the iterator members in the conversation item struct. Update
the GTK+ code accordingly.
Excercise for the reader:
- Update TShark to use the common hash code.
Ping-Bug: 9231
Ping-Bug: 8703
Ping-Bug: 6727
Change-Id: I8728d771fc5b1a85937bed9d898e53c3ecc3a544
Reviewed-on: https://code.wireshark.org/review/2987
Reviewed-by: Michael Mann <mmann78@netscape.net>
just the framework and some simple translations
Change-Id: I7653a9c6ab26b391bfe2942d088d233996030576
Reviewed-on: https://code.wireshark.org/review/3134
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Martin Kaiser <wireshark@kaiser.cx>
Trigger dialog creation by passing a method name to
QMetaObject::invokeMethod. I'm not entirely sure this is sane but it
seems to work OK. Move getopt processing further down in the main initialization sequence
to more closely match GTK+ and allow for stat command registration.
Change-Id: I5cd5375fa71dbadac69d528b2ba3bb13598dc3f6
Reviewed-on: https://code.wireshark.org/review/2964
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Move the GTK files necessary for managing the recnet remote host from capture_dlg.c to recent.c in order to use them in QT, too.
Change-Id: I3f3fd31ce928162de08c6db7309ef2a9b1e97760
Reviewed-on: https://code.wireshark.org/review/2955
Reviewed-by: Anders Broman <a.broman58@gmail.com>
- allow to change the interface options in the table
- save the options to preferences when the dialog is left
- add a field for setting a capture filter for all selected interfaces
- add a "Compile BPF" button and a window to show the compiled filter output
- try to address Alexis' and Evan's comments
Change-Id: Ic1272e29183ec80e2d2f4b3e494c79dabe2c3b6f
Reviewed-on: https://code.wireshark.org/review/1946
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
bug:9718
Change-Id: I05330d8a2475ad0d238723d444f3d98bdbd7be39
Reviewed-on: https://code.wireshark.org/review/1041
Reviewed-by: Michael Mann <mmann78@netscape.net>
For each graph you can set:
- Its visibility
- A name
- A display filter
- Color, from a fixed list
- Plot style: Line, Impulse, Bar, Stacked Bar, Dot, Square, Diamond
- Basic Y Axes (packets/s, bytes/s, bits/s)
- Computed Y Axes (SUM, MIN, AVG, MAX)
- Smoothing
You can pan and zoom using the mouse and keyboard. Clicking on a graph
selects the last packet for that interval. If all graphs have the same Y
axis a single label is shown, otherwise a legend is shown.
The time scale (X axis) can be toggled between relative seconds and the
time of day.
Graphs can be saved as PDF, PNG, BMP, and JPEG. Settings are "sticky"
via the io_graphs UAT.
To do:
- Minimize graph drawing delays.
- Figure out why smoothing differs from GTK+
- Everything else at the top of io_graph_dialog.cpp
- Fix empty resets.
A fair amount of code was copied from TCPStreamDialog. We might want to
subclass QCustomPlot and place the shared code there.
Move common syntax checking to SyntaxLineEdit.
Move some common code from ui/gtk/io_stat.c to ui/io_graph_item.[ch] and
use it in both GTK+ and Qt.
Make the io_graph_item_t array allocation in io_stat.c static. The
behavior should be identical and this gives us additional compile-time
checks.
Change-Id: I9a3d544469b7048f0761fdbf7bcf20f44ae76577
Reviewed-on: https://code.wireshark.org/review/435
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
(Using sed : sed -i '/^\# \$Id\$/,+1 d') (start with dash)
Change-Id: Ia4b5a6c2302f6a531f6a86c1ec3a2f8205c8c2dd
Reviewed-on: https://code.wireshark.org/review/881
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Rebase with last change and add Logcat export
Change-Id: Idc9b444b1bf14b95ff60e8466e94f7eecd875b47
Reviewed-on: https://code.wireshark.org/review/14
Reviewed-by: Anders Broman <a.broman58@gmail.com>
* Reuse sparkline from welcome
* Split settings in tab (!= GTK)
* No all feature work (Work In Progress...)
* ...
Comments (and review) are welcome !
svn path=/trunk/; revision=53563
Add menu items for each corresponding item in gtk/main_menubar.c that
calls gtk_stats_tree_cb(). Hopefully that's everything. Note that we use
quite a bit less code than the GTK+ flavor and why we might not want to
do that. Change a few things in ui/qt/CMakeLists.txt to more closely
match the GTK+ version. Add plumbing for tap registrations in
CMakeLists.txt and Makefile.am. Add the ability to copy text as CSV or
YAML.
svn path=/trunk/; revision=53464
Collect packet numbers when following streams so that we can correlate
text positions with packets. Add a FollowStreamText class so that we can
track mouse events. Add a hint label that shows the packet under the
cursor along with packet counts and the number of "turns".
Add the packet number to the C array dump. Note that dumping to YAML
might be useful for Scapy users.
svn path=/trunk/; revision=53314
Copy common code from ui/gtk/flow_graph.c and ui/gtk/graph_analysis.[ch]
to ui/tap-sequence-analysis.[ch]. Start using the name "sequence" in
places.
svn path=/trunk/; revision=52824
Add TCP/UDP/SSL Follow feature to QtShark
Known issue :
* Duplicate code with GTK (function need follow_info_t struct but in GTK there is some GWidget variable in struct)
* Sometimes TCP Follow fail...
svn path=/trunk/; revision=51883
Add the QCustomPlot widget. Thanks to Emanuel Eichhammer for granting a
license change. Move some common code from ui/gtk/tcp_graph.c to
ui/tap-tcp-stream.[ch]. Get rid of tcp_graph_selected_packet_enabled().
It was only used in the menu code and didn't match what we were doing
elsewhere.
Still quite a bit of work to do but it's a promising start.
svn path=/trunk/; revision=51538
Add CaptureFilterCombo and CaptureFilterEdit classes, similar to their
display filter counterparts. Add a CaptureFilterSyntaxWorker class which
runs a syntax check in a background thread similar to the threaded code
in capture_dlg.c. Add a bunch of related signal and slot plumbing. Other
minor fixups.
svn path=/trunk/; revision=51200
C++-ize the UAT headers.
Add an ElidedLabel widget. Use it in the File Set, Profile, and UAT
dialogs.
Update the Qt README.
svn path=/trunk/; revision=50896
CLEAN_FILES
DIRTY_FILES
and move packet_list_record.cpp to DIRTY.
Now I finally have a compiling qtshark again (clang and Qt5)
svn path=/trunk/; revision=50832
Add Summary Statistics to qtshark (Statistics => Summary)
Now, use tabs to split summary display (File Capture details, Capture Statistics)
Add also Comment Summary tab (to replace Statistics => Comments Summary)
From me :
Fix order of summary files in Qtshark.pro
svn path=/trunk/; revision=50470
column. Conversation spans (setup frame to last frame) are shown with a
square bracket. Linked frames are shown with a circle.
Use correct column justifications in Qt. Move common
justification-related packet list code to ui/packet_list_utils.[ch].
Add a last_frame element to conversation_t.
svn path=/trunk/; revision=50447
picker widget so we're back to popping up dialogs. Move the contents of
monospace_font.{cpp,h} to wireshark_application.{cpp,h}.
Pango and Qt use completely different string representations for fonts.
Add a separate gui.qt.font_name preference so that they don't clobber
each other.
svn path=/trunk/; revision=47240
representations, and default status out of write_prefs and into their
own routines. Split the corresponding custom preference write callbacks.
Fix an apparent memory leak in the hidden column callback.
Add an initial preferences dialog to the Qt port. Use the new preference
routines to implement an "Adavanced" page similar to the "about:config"
page available in many web browsers. Standard pages will hopefully follow
soon.
Remove some QDebug includes and make sure our QTreeWidgets have uniform
row heights set.
svn path=/trunk/; revision=46942
GTK+: Shorten the packet comment menu item name. Remove a couple of
unneeded includes.
Both: Add an arbitrary 20 MB limit when fetching all packet comments.
Use a color from the Tango palette for comments.
svn path=/trunk/; revision=46709
when we detect a remote connection). Use it for the "go to" and search
frames. Properly detect remote connections in the splash overlay.
svn path=/trunk/; revision=46591
actually doing and what users are likely to want to do. Rename the
search enum values and functions to reflect what we're actually doing
and add a comment explaining why making searches more correct might make
searching worse. Add a search bar to the Qt main window, thus
continuing the War On Gratuitous Dialogs.
Clear out any previous temporary label stack items before adding a new one.
svn path=/trunk/; revision=46541
Michael Mann