equivalents for the toplevel directory. The removal of winsock2.h will
hopefully not cause any problems under MSVC++, as those files using
struct timeval still include wtap.h, which still includes winsock2.h.
svn path=/trunk/; revision=5932
padding when printing text and use "putline" when printing PostScript.
Eliminate "hexdump", as it's just a special case of "putline".
Have "proto_tree_print_node()" just call "print_line()".
Get rid of "print_ps_hex()" - the font used for the hex dump and the
protocol tree are the same, so there's no need to switch fonts.
svn path=/trunk/; revision=5798
routines; instead, rename "print_hex_data_common()" to
"print_hex_data_buffer()" as it prints a buffer in hex and ASCII (or
EBCDIC), and have it take the print format as an argument.
Have it use "print_line()" to print lines, and fix "print_line()" so
that it prints a buffer *without* a newline at the end, printing the
newline itself.
svn path=/trunk/; revision=5729
common code, rather than in print-format-specific code, and have
"print_hex_data_common()" put out the blank line before the dump itself
rather than relying on the print-format-specific "start printing the hex
dump" code to do it.
svn path=/trunk/; revision=5728
in the "packet_info" structure instead, as we don't need a pointer for
every single frame in the capture file, just for each frame for which we
currently have an open "epan_dissect_t".
svn path=/trunk/; revision=5614
static, and add a new "packet-data.h" to declare "proto_data".
Display escape sequences in octal in the IAPP dissector, as is now done
in the RADIUS dissector.
svn path=/trunk/; revision=5441
ETT_NONE entry.
Initialize the "tree_type" field of a "field_info" structure to -1,
meaning "this has not been given a subtree". Add checks before using
that field that it's in range. That way, you have to create a subtree
before putting protocol tree items under another item.
We allocate the "tree_is_expanded" array when we've registered all
dissectors; there's no need to allocate it while we're registering
dissectors and, in fact, doing so means we leak memory (the memory for
the version we allocated while registering dissectors).
svn path=/trunk/; revision=5068
be eliminated (because the function is called through a pointer, and
other functions called through the same pointer *do* use the argument)
as unused.
svn path=/trunk/; revision=5050
"data source" has a name and a top-level tvbuff, and frames can have a
list of data sources associated with them.
Use the tvbuff pointer to determine which data source is the data source
for a given field; this means we don't have to worry about multiple data
sources with the same name - the only thing the name does is label the
notebook tab for the display of the data source, and label the hex dump
of the data source in print/Tethereal output.
Clean up a bunch of things discovered in the process of doing the above.
svn path=/trunk/; revision=4749
"epan/..." pathnames, so as to avoid collisions with header files in any
of the directories in which we look (e.g., "proto.h", as some other
package has its own "proto.h" file which it installs in the top-level
include directory).
Don't add "-I" flags to search "epan", as that's no longer necessary
(and we want includes of "epan" headers to fail if the "epan/" is left
out, so that we don't re-introduce includes lacking "epan/").
svn path=/trunk/; revision=4586
files. See text2pcap.1 (built from doc/text2pcap.pod) for details.
Changed 'tethereal -x' output to match hex dump format of text2pcap,
Ethereal and others.
svn path=/trunk/; revision=3421
it in SOCKS dissector.
(Okay, how many times am I going to modify packet.h today, forcing you
to re-compile everything? :-)
svn path=/trunk/; revision=1850
summary.c now provides a struct of info (see summary.h)
Changed the name of the summary dialogue callback (hence the change
in menu.c), and added a close button to the dialogue.
Moved #include <gtk/gtk.h> out of print.c and into prefs.h where it
was needed for GdkColor.
svn path=/trunk/; revision=1273
of SNA in a packet changes the character encoding from the default ASCII
to EBCDIC.
The hex-printing routines in the GUI code and in the printing code convert
to EBCDIC if appropriate.
svn path=/trunk/; revision=1089
of the packet be printed (this is only done if "Print detail" is
selected; it should be grayed out of "Print summary" is selected).
If that item is selected, suppress the hex printing of uninterpreted
data items in the protocol tree.
Move some GTK+ keys not used outside of "gtk/print_dlg.c" from
"gtk/keys.h" into "gtk/print_dlg.c".
svn path=/trunk/; revision=736
the "File/Print" dialog box; "Expand all levels" means that all levels
of the protocol tree should be printed, while "Print as displayed" means
that only those levels shown in the display should be printed.
Free the table of column widths once printing is done.
svn path=/trunk/; revision=671
prints the protocol tree, and summary prints the fields in the summary
clist, with a header line at the beginning of the printout.
Print only packets selected by the current packet filter.
Just have "ARP" and "RARP" in the "Protocol" field for ARP packets;
whether it's a request or a reply can be seen in the "Info" field.
Add to the "Frame" section of the protocol tree the time between the
current packet and the previous displayed packet, and the packet number.
Have FT_RELATIVE_TIME fields be a "struct timeval", and display them as
seconds and fractional seconds (we didn't have any fields of that type,
and that type of time fits the delta time above).
Add an FT_DOUBLE field type (although we don't yet have anything using
it).
svn path=/trunk/; revision=666
think I may have to worry about page boundaries and the like - so, for
now, we make the "File/Print..." stuff print only as text. ("Print
Packet" can still print PostScript, as always.)
We clean up a few text vs. PostScript things for printing multiple
frames, but it's still not ready for prime time.
svn path=/trunk/; revision=383
capture to a file or printer. This should eventually get the ability to
print either all the packets or only the packets selected by the display
filter, and possibly also the ability to print only packets M through N.
Get rid of "cur" member of "capture_file" structure; nobody used it.
There's no need to pass a pointer to a "dialog_button" variable to
"simple_dialog()" for the error boxes displayed if a file copy or move
fails; that dialog box is just a message box and has only an "OK"
button.
Put the declaration of "prefs" into "prefs.h".
svn path=/trunk/; revision=378
suggestion, this new method using a static array should use less memory
and be faster. It also has a nice side-effect of making the source-code
more readble, IMHO.
Changed the print routines to look for protocol proto_data instead of
looking at the text label as they did before, hoping that the data hex
dump field item starts with "Data (".
Added the -G keyword to ethereal to make it dump a glossary of display
filter keywords to stdout and exit. This data is then formatted with
the doc/dfilter2pod perl program to pod format, which is combined
with doc/ethereal.pod.template to create doc/ethereal.pod, from which
the ethereal manpage is created. This way we can keep the manpage up-to-date
with a list of fields that can be filtered on.
svn path=/trunk/; revision=364
tree constructed from the protocol tree:
1) The value of "level" field of GTK+ tree items appears to
depend on various random things - see a change I made to
"packet-dns.c" a while ago, to change the order in which
items were put in the tree, so that DNS trees printed with
correct indentation - and, right now, we appear to be doing
*something* wrong, as some packets I printed from one file
here had randomly bogus indentation; I could probably track
the problem down and fix it, but that might just hold us
until we accidentally do something *else* wrong by GTK+'s
lights.
The new code provides its own tree level as it goes.
2) The new code is independent of GTK+, so it could be used with
other toolkits, or with non-GUI variants of Ethereal.
3) This may make it easier to add a "Print..." menu item to let
the user print packets other than the currently selected
packet.
Make the internal routines used to print the packet static.
For the "Print Packet" menu item, put up a message box if they haven't
yet selected a packet.
svn path=/trunk/; revision=362
mechanism that is built into ethereal. Wiretap is now used to read all
file formats. Libpcap is used only for capturing.
svn path=/trunk/; revision=342
why I had to swap fields (data = w) in some of the callback functions when
I added support for gtk+-1.1. Because of the use of gtk_signal_connect_object,
the wrong value was being sent to the callback function. We were just lucky
that with gtk+-1.0 it worked.
gtk_signal_connect_object is for use with callbacks that take one argument.
gtk_signal_connect is for use with callbacks that take two arguments.
svn path=/trunk/; revision=324
reference the protocol tree with struct proto_tree and struct proto_item
objects. That way, the packet decoding source code file can be used with
non-gtk packet decoders, like a curses-based ethereal, e.g. I also re-arranged
some of the information in packet.h to more appropriate places (like other
packet-*.[ch] files).
svn path=/trunk/; revision=223