At one point, I remember a discussion resulting in the official name of
the next-generation replacement for pcap format being changed to
"pcapng", with no hyphen.
Make Wireshark reflect that.
Change-Id: Ie66fb13a0fe3a8682143106dab601952e9154e2a
Reviewed-on: https://code.wireshark.org/review/25214
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add ENABLE_TSAN and enable-tsan options to CMake and Autotools
respectively which enable ThreadSanitizer, similar to AddressSanitizer
and UndefinedBehaviorSanitizer.
Change-Id: I79adf5c1516b0938f140bbf501c181bf14d7619b
Reviewed-on: https://code.wireshark.org/review/24515
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This sets the scope of the static build option to Wireshark support
libraries only.
Before the patch:
Static plugins don't work with CMake and autotools.
autotools static build is broken, and most likely will always be, as
building Wireshark all-static is difficult and time-consuming.
After the patch:
For CMake Wireshark will be built with static or shared libraries and
dynamic plugins. Everything just works. CMake apparently doesn't want
you building static and shared libraries at the same time.
For autotools Wireshark will be built with shared libraries by default.
--disable-shared and --enable-static options work as usual. Dlopened
plugins are not built if --disable-shared is given to configure (to
disable shared libraries). This is a limitations imposed by libtool.
Tested on Linux. This removes broken support for building plugins
statically.
Change-Id: Ib8e8176976f136eea93a2ce8f9857b6cf9bec64c
Reviewed-on: https://code.wireshark.org/review/24241
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Remove options that aren't supported on Windows
Don't use pkgconfig on Windows
Change-Id: I79718a1c43f56a9ec88f690490931b80b727dd68
Reviewed-on: https://code.wireshark.org/review/24481
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
In some editors (like Xcode) it's possible to turn on and off
ASAN and UBSAN independent of the settings in CMake.
This option will disable the -Wframe-larger-than= flag even if
ASAN or UBSAN are not turned on in CMake.
Change-Id: I70b1ae544fe87093d0f5ce7ceb191f33399191ea
Reviewed-on: https://code.wireshark.org/review/23567
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Allow nghttp2 to be disabled, similar to --without-nghttp2.
Change-Id: Id27ab12ef7c24a535824f762ce2feb20fba9e065
Reviewed-on: https://code.wireshark.org/review/23247
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Adjust the following CMake and Autotools behaviors in order to
synchronize their respective install behaviors:
- Disable tfshark by default in CMakeOptions.txt
- Add profiles/Bluetooth/preferences to Makefile.am
- Add missing captype and ciscodump entries to doc/Makefile.am
- Install help/faq.txt on all platforms in CMakeLists.txt
- Add BUILD_corbaidl2wrs, BUILD_dcerpcidl2wrs, and BUILD_xxx2deb
options to CMake and use them to adjust the corresponding parts
of the build.
- Pull the DCERPC idl2wrs build steps into the top-level
CMakeLists.txt.
This change doesn't sync everything. Some installed content still
diverges, including the following:
- CMake installs a bunch of modules into lib/wireshark:
FindGLIB2.cmake
FindWireshark.cmake
FindWSWinLibs.cmake
LocatePythonModule.cmake
UseAsn2Wrs.cmake
UseMakeDissectorReg.cmake
WiresharkConfig.cmake
WiresharkConfigVersion.cmake
Do we need any or all of these? If so, should the Autotools behavior
be synced accordingly?
- Autotools installs libtool .la files. It also installs
wireshark-gtk.desktop unconditionally.
Change-Id: I7846efe08f7139c31b6ceca6f08a1fa5168b3e22
Reviewed-on: https://code.wireshark.org/review/23041
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
UndefinedBehaviorSanitizer (UBSan) can catch a lot of issues
(out-of-bounds memory access, integer overflows, undefined shifts,
etc.) and is recommended during development using GCC or Clang. Add an
option for it (similar to ASAN support).
Change-Id: Ib0db50cee9eb5af0f5c4f06e07f3899a3a34702d
Reviewed-on: https://code.wireshark.org/review/21673
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This can be used by dissectors that need to parse out-of-band
configuration.
Change-Id: I13c0a2f408fb5c21bad7ab3d7971e0fa8ed7d783
Reviewed-on: https://code.wireshark.org/review/20912
Reviewed-by: Roland Knall <rknall@gmail.com>
Avoid anachronisms, however; there was no "macOS 10.0" or even "OS X
10.0", for example. It was "Mac OS X" until 10.8 (although 10.7 was
sometimes called "OS X" and sometimes called "Mac OS X"), and it was "OS
X" from 10.8 to 10.11.
Change-Id: Ie4a848997dcc6c45c2245c1fb84ec526032375c3
Reviewed-on: https://code.wireshark.org/review/20933
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It has been unsupported for some years and when talking about removing it
in the past I received some positive and no negative feedback.
There is one instance of echld left:
capchild/capture_sync.c: * echld might have already reaped the child.
Can that case be removed or should be comment be updated to something more
accurate? (left for a separate patch)
Change-Id: Idac397158dd86fd0728eb95379449ee4a463fc28
Reviewed-on: https://code.wireshark.org/review/20619
Petri-Dish: Jörg Mayer <jmayer@loplof.de>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Creates an interface for plugins and other parts of the code, to
add a new toolbar to the system and have various widget types interact
with this toolbar.
All toolbars added via this interface, will be added to an additional
submenu called "Additional Toolbars" within Wireshark.
Also a demo plugin is being provided, demonstrating various features
of the toolbar, including updating the gui elements. It also demonstrates
how to update toolbar items.
Change-Id: I8d0351224b3d7f4b90220d58970b51695551d7e3
Reviewed-on: https://code.wireshark.org/review/19803
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Removed all guards for HAVE_LIBGCRYPT, change autotools and CMake to
error out if it is not available. Update release notes, developer
documentation and README with the new status. Clarify relation with
GnuTLS in macosx-setup.sh. Install Libgcrypt via brew script.
Motivation for this change is that many dissectors depend on Libgcrypt
and having it optional increases the maintenance burden (there have been
several compile issues in the past due to the optional status).
Furthermore, wsutil has crypto code that can be replaced by Libgcrypt.
Change-Id: Idf0021b8c4cd5db70b8766f7dcc2a8b3acbf042f
Link: https://www.wireshark.org/lists/wireshark-dev/201702/msg00011.html
Reviewed-on: https://code.wireshark.org/review/20030
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Integrate the Spandsp library for G.722 and G.726 support. Adds support
for G.722 and all eight variants of G.726.
Note: this also fixes a crash in Qt (buffer overrun, reading too much
data) caused by confusion of the larger output buffer (resample_buff)
with the smaller input buffer (decode_buff). It was not triggered before
because the sample rate was always 8k, but with the addition of the new
codecs, a different sample rate became possible (16k).
Fix also a crash which occurs when the RTP_STREAM_DEBUG macro is enabled
and the VOIP Calls dialog is opened (the begin frame, start_fd, is not
yet known and therfore a NULL dereference could occur).
Passes testing (plays normally without bad RTP timing errors) with
SampleCaptures files: sip-rtp-g722.pcap and sip-rtp-g726.pcap. Tested
with cmake (Qt), autotools (Qt and GTK+) with ASAN enabled.
Bug: 5619
Change-Id: I5661908d193927bba50901079119eeff0c04991f
Reviewed-on: https://code.wireshark.org/review/18939
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add an option to check for and use ccache. Disable it by default.
Change-Id: Ifc928d22715b7e06e53115455b31dbeaf2ee8332
Reviewed-on: https://code.wireshark.org/review/18715
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
I suggested disabling GTK+ by default at Sharkfest EU and no one
objected, hence this patch.
Disable it by default in both Autotools and CMake. Make sure it's
enabled for Debian packaging. The RPM packaging enables GTK3 explicitly
so no change appears to be necessary there.
Change-Id: If5daeaef4bb26cf60006bc8883be15b2cf6c6ae4
Reviewed-on: https://code.wireshark.org/review/18256
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
We do not use the STARTUP negotiation since a stream
can be captured in its middle but try to decompress
if the flag is present and fallback if it fails.
Change-Id: Iecbf49a45220b04be7808869c9884548eb1e7694
Signed-off-by: Benoît Canet <benoit@scylladb.com>
Reviewed-on: https://code.wireshark.org/review/17952
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Udpdump is a generic UDP receiver that exports datagram in PCAP format.
Change-Id: I52620a92b12530b6f9b5449c43e692663acdfc14
Reviewed-on: https://code.wireshark.org/review/17195
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Add a callable target such that dissectors can be generated without the
AUTOGEN_dcerpc option.
Modelled after the pidl CMakeLists.txt file and target. This approach
has the advantage over the previous implementation such that the clean
target does not remove the packet-dcerpc-X.c files.
Change-Id: I3226937eaa76dffa253df9d4f989421d5faa3f3f
Reviewed-on: https://code.wireshark.org/review/15989
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The dissectors list is generated based on regex magic on pidl/Makefile.
A dssetup.cnf file is added because all other protocols already have
this file. The srvsvc and wkssvc protocols cannot be built for some
reason, so just disable it (this mirrors the original Makefile).
Add frsrpc and samr to PIDL_DISSECTOR_SRC list which was missing
compared to autotools.
Tested with an out-of-tree and in-tree build with cmake (make and ninja):
cmake -GNinja && ninja -v pidl-dissectors
touch epan/dissectors/pidl/dfs/dfs.idl && ninja generate_dissector-dcerpc-dfs
cmake . && make -C epan/dissectors/pidl generate_dissector-dcerpc-dfs
Change-Id: Id8bf34e76c20053a8a393024560d90a048473e03
Reviewed-on: https://code.wireshark.org/review/15962
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Also try to improve check hf description.
Change-Id: I7a1e5997dfc7a97cc62e2f2f9cc7c5026468451e
Reviewed-on: https://code.wireshark.org/review/14623
Reviewed-by: João Valverde <j@v6e.pt>
Ciscodump is a new extcap that allows packet capture
on Cisco routers (IOS 12.4 and later) through SSH.
Change-Id: Ic9c5be01d3bd0112116f7fc9fa10e26c1552b007
Reviewed-on: https://code.wireshark.org/review/13886
Reviewed-by: Roland Knall <rknall@gmail.com>
Set ENABLE_CHECK_FILTER to 1 for get list of display filter with conflict...
Ping-Bug:2402
Change-Id: I8d56b1573120d1a29d437aae1088be242e15e9a3
Reviewed-on: https://code.wireshark.org/review/13644
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
This new extcap is for testing and educational purpose.
It relies on rankpkt-core functions to generate random packets.
Change-Id: If6890f0673545682995a2079458108edc0913b30
Reviewed-on: https://code.wireshark.org/review/11764
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
sshdump is an extcap module that allows dumping from a remote host using an ssh connection.
It goes with the existing extcap plugin interface.
Change-Id: I8987614fdd817b8173a50130812bc643a4833bca
Reviewed-on: https://code.wireshark.org/review/11402
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
androiddump is extcap program that can be used with Android devices
(need Android SDK in system PATH). Supported is Logcat/Logger logs and
Bluetooth interfaces for all Android to this day (Lollipop).
Please note that it will work also for FirefoxOS.
Interfaces:
1. Logcat Main (binary or text)
2. Logcat System (binary or text)
3. Logcat Events (binary or text)
4. Logcat Radio (binary or text)
5. Logcat Crash (text; Lollipop)
6. Bluetooth Hcidump (<Kitkat)
7. Bluetooth Bluedroid External Parser (Kitkat)
8. Bluetooth BtsnoopNet (Lollipop)
Change-Id: I26e4cd1a37a6af805f8b932399b4aa44ee7b5a80
Reviewed-on: https://code.wireshark.org/review/7475
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Add a wrapper script and CMake macros which lets us run Cygwin's a2x
from Windows. Add *another* wrapper script that ignores the return value
of hhc.exe.
Move the ASCIIDOC2DOCBOOK macro to FindASCIIDOC.cmake. Add FindHHC.cmake.
Add hints to FindFOP.cmake.
Use unique file names in the HTML Help chain in an attempt to avoid a
race condition.
To do:
- Fix curly quote in HHC title.
Change-Id: I9b154b7fbd02703656e2ab380199ec0a6db4e36d
Reviewed-on: https://code.wireshark.org/review/6379
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Currently Visual Studio-only. Enabling it adds /analyze:WX- to
LOCAL_CFLAGS, similar to config.nmake.
Change-Id: Ida68831e85f5f04b9f84faa95a39fed24e5f490d
Reviewed-on: https://code.wireshark.org/review/6346
Reviewed-by: Gerald Combs <gerald@wireshark.org>
(Just as we note why we only check for it on Linux in autotools.)
Change-Id: I58c1f31fdf667ed554a4e911df13e5c864171ac0
Reviewed-on: https://code.wireshark.org/review/6315
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add convenience targets for generating the release notes and the NEWS
file. Make sure we don't run multiple instances of a2x + AsciiDoc at the
same time.
Add the docbook directory to the build by default unless we're running
Windows. Explain why we don't yet build docs on Windows. Make each
docbook makefile target optional.
Split the ENABLE_GUIDES option into ENABLE_HTML_GUIDES and
ENABLE_PDF_GUIDES. Add a default "all_guides" target if either is on.
Remove the Debian patch that hacked around the PDF requirement.
Copy ws.css to the docbook build directory. Don't build PDF release
notes. I'm not sure we ever used them and I don't want to install Java
and FOP just to make a release.
Change-Id: Ia2f710000c17f9e0b4b514fd373d9a5902889553
Reviewed-on: https://code.wireshark.org/review/5712
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add an ENABLE_APPLICATION_BUNDLE option which is enabled by default on
OS X and disabled elsewhere. The bundle is currently bare-bones and only
contains the main executables, Info.plist, and application icon.
Capitalize the main application name when ENABLE_APPLICATION_BUNDLE is
set and on Windows.
Start updating CPackConfig.txt for OS X packaging.
To do:
- Add supporting libraries and frameworks.
- Make the bundle standalone. I.e. call FIXUP_BUNDLE or
replicate the relevant parts of osx-app.sh
Change-Id: I4e25abd3b8cbe121ec8615b98706a15c58812cdb
Reviewed-on: https://code.wireshark.org/review/4577
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make sure the Qt UI is named "Wireshark" and its executable is named
"wireshark" or "wireshark.exe". Make sure the GTK+ UI is named
"Wireshark 1" or "Wireshark (GTK+)" depending on how much the target
audience is likely to care about UI toolkits. Make sure the GTK+
executable is named "wireshark-gtk" or "wireshark-gtk.exe".
It looks like moving to Qt 5.3 (g978faf3) broke the PortableApps
package. It's likely even more broken now.
Autotools out-of-tree builds also broke on Ubuntu 12.02 (automake
1.11.3) at some point. The first attempt to compile in ui/qt returns
"error: source_file.cpp: No such file or directory". The second attempt
works. Out-of-tree builds work fine on Ubuntu 14.04 (automake 1.14.1).
Tested:
- Nmake builds
- NSIS packaging
- CMake builds (Windows, OS X)
- Autotools build and distcheck
- RPM packaging
To do:
- Test Debian packaging
- Fix PortableApps
Change-Id: I66429870e05fd2d6fc901942477959ed6164fce2
Reviewed-on: https://code.wireshark.org/review/3919
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Extcap is a plugin interface, which allows for the usage
of external capture interfaces via pipes using a predefined
configuration language which results in a graphical gui.
This implementation seeks for a generic implementation,
which results in a seamless integration with the current
system, and does add all external interfaces as simple
interfaces.
Windows Note: Due to limitations with GTK and Windows,
a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe
is needed, which is part of any GTK windows installation.
The default installation directory from the build is an extcap
subdirectory underneath the run directory. The folder used by
extcap may be viewed in the folders tab of the about dialog.
The default installation directory for extcap plugins with
a pre-build or installer version of wireshark is the extcap
subdirectory underneath the main wireshark directory.
For more information see:
http://youtu.be/Nn84T506SwU
bug #9009
Also take a look in doc/extcap_example.py for a Python-example
and in extcap.pod for the arguments grammer.
Todo:
- Integrate with Qt - currently no GUI is generated, but
the interfaces are still usable
Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f
Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net>
Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net>
Signed-off-by: Roland Knall <rknall@gmail.com>
Reviewed-on: https://code.wireshark.org/review/359
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
- We don't expect to find all packages and it is normally OK for
some to fail.
Change-Id: I46c5edbf8ea3635fd703b222d4a9beb5ebb4745a
Reviewed-on: https://code.wireshark.org/review/2406
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Use GTK2 as per nmake.
Not to build the dumpabi executables.
Change-Id: Ia28cf1a80b81e10595f4af5bbd46da3b3675faf5
Reviewed-on: https://code.wireshark.org/review/1376
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>