In the attached patch, the K12 wiretap now saves the content of record
after captured packet data. The K12 dissector then could extract them and provide
useful information to properly dissect FP frames (user plane of UTRAN Iub
interface).
svn path=/trunk/; revision=20749
Kriang Lerdsuwanakij <lerdsuwa@users.sourceforge.net>
I discovered that Wireshark K12xx detects the type of input (E1 timeslot or ATM)
based on the extra information. My previous patch to enable Wireshark to open
K12xx files with no extra information (extra_len equals 0 in SRCDEST record)
failed to give later dissectors the input type.
Attached is the patch to correct this for ATM PVC. It adds VPI/VCI/CID information
for display in the dissected tree (in k12_open function). k12_read and k12_seek_read
are also made more robust. These are reverse engineered based on hexeditor
and constants found in tektronix configuration file. Please apply the patch.
svn path=/trunk/; revision=20705
Modified to support the header as a pseudo_header rather than as part of
the packet data.
Fixed some calls that fetch data from the USB packet to fetch it in
little-endian byte order.
Got rid of redundant code to get conversation-specific data (the
get_usb_conv_info() call already does that).
For control packets, only parse the setup information if setup_flag is
0.
Don't interpret a control packet as a standard request unless the setup
type is "Standard".
svn path=/trunk/; revision=20632
I found out the reason Wireshark refuses to read some .rf file I have.
Those files have zero extra_len in SRCDEST header structure. See the
attached file for example. It was created by selecting some frames from
a larger .rf5 file (within Tektronix's own reader) and save as a
separate file.
svn path=/trunk/; revision=20579
32-bit numbers. Separate signed and unsigned accessors have been
added and used where appropriate.
Definitely not for 0.99.5.
svn path=/trunk/; revision=20472
fix this, by providing required functions in the new file file_util.c - it's mostly copied from GLib (g_open alike - that take UTF8 as filename format but don't use msvcrt.dll V6 for this as the glib files do)
"link" to these functions in file_util.h: #define eth_open eth_stdio_open
revert changes (from SVN 20282) throughout the code related to these file functions which were introduced with the first tries of MSVC 2005 ...
Hopefully I've done everything right with the new file_util.c ...
svn path=/trunk/; revision=20402
Wiretap has its own configuration file. Do to its configuration file
what was done to the top-level configuration file.
svn path=/trunk/; revision=20326
used with shared libraries, to fix some error that shows up in some
cases; some Apple documentation recommends it for most shared libraries.
svn path=/trunk/; revision=20312
I posted a patch about 1.5 years ago for the formerly Ethereal to successfully compiled with Visual > 6. I have always successfully used this patched Ethereal/Wireshark compiled with VS 2003 and have just checked when compiled with Visual C++ 2005 Express
svn path=/trunk/; revision=20282
HP-UX 11.31 will add a new nettl trace subsystem, NS_LS_TELNET (ID=267).
NS_LS_TELNET is just raw telnet data. There is no layer 2/3/4 headers, so
there's just the HP-UX nettl record header followed directly by the TCP payload
for a telnet connection. Thus the need for a new wiretap encapsulation type...
svn path=/trunk/; revision=20253
This patch consists also the last issues. Additionally it solves:
- For the SSCOP frames the AAL5 decoding was not performed due to an earlier patch. This caused that no SSCOP message was properly decoded.
- As the detection between a LANE frame and a SSCOP frame is rather hard a switch within the atm dissector is included which enforce SSCOP dissecting over a LANE frame. At the moment I do not see a better solution for that.
svn path=/trunk/; revision=20013
- The characters between the timestamp and start of data are almost always " l ", optimise memory usage in this case
- Rename hash table for clarity
svn path=/trunk/; revision=19891
Check for an invalid channel frequency. Pass the channel, data rate,
and quality to the 802.11 dissector, so that they show up there
as well. Clean up whitespace.
svn path=/trunk/; revision=19878
the attached patch add support for the recently introduced pcap
bluetooth data link type. Yes, pcap is going to support also bluetooth
devices (at least on Linux) :-)
svn path=/trunk/; revision=19513
The patch addresses issues with higher precision packet
timings on top end iSeries hardware and should enable the iseries wiretap to handle timings in both micro and nano seconds.
svn path=/trunk/; revision=19428
- Indicate direction of DCH Data in info column
- Assume EDCH payload CRC if 2 bytes are left over (previous test was broken)
svn path=/trunk/; revision=19405
So far Wireshark complained about channel 129, now it gets a little further
and then complains about channel 128.
Solution: Open up all channel from 128 up.
svn path=/trunk/; revision=19358
I am the author of the eyesdn wiretap module. Recently we added ATM
support to our trace format. We used channel id 129 for that, so far
only 0 for D channel and 1-30 for bearer channels had been in use.
svn path=/trunk/; revision=19353
to use cmake as a build system. It's in no way complete, I'd
just like others to be able to participate in playing with cmake
and to document what I'm doing.
Please read the README.cmake for what can be done right now.
svn path=/trunk/; revision=19149
files, and to clean the code up a bit - and incorporate some fixes to
the rework, and other fixes, from Mark C. Brown.
svn path=/trunk/; revision=18945
Luis Ontanon