Allow user to specify time resolutions as fine as 1 nanosecond for the
start and stop times (-A and -B options) for editcap. Uses `nstime_t`
for the user options and `nstime_cmp()` to compare with packet
timestamps.
Change-Id: I2340bc4830c7d9a6b17a5e53fa4e8837e231bcb6
Reviewed-on: https://code.wireshark.org/review/38057
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The sshdump command is typically not invoked directly, and I need a
place to refer people to for configuring Wireshark.
Change-Id: I10fb3d88dbb3aea0bfcaf22aac90b36a7a8dc814
Reviewed-on: https://code.wireshark.org/review/37897
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
sshdump can now be copied in multiple instances. Each instance will
show up a different interface and will have its own profile.
This will help users connecting to different hosts. Instead of changing
profiles, sshdump can be cloned, and each instance will be used for a
single host.
Change-Id: If4fb42cf78021c6f16213ae91cbf41ec7f61ca77
Reviewed-on: https://code.wireshark.org/review/37883
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We aren't using them now; stick to libpcap APIs (including Windows-only
libpcap APIs).
Change-Id: I812eaa31ba1e6e611418853105d3e00c9130a420
Reviewed-on: https://code.wireshark.org/review/37852
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
Our authors lists and man pages are encoded as UTF-8 and have been for
quite a while. Remove perlnoutf.pl and ensure that standard I/O uses
UTF-8 as described at
https://www.perl.com/pub/2012/05/perlunicook-make-all-io-default-to-utf-8.html/
Change-Id: I7016ec5e3a12934463b43bcfdde2c424069c20ac
Reviewed-on: https://code.wireshark.org/review/37817
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In each of our executables we were calling "setlocale(LC_ALL, "")" at
startup. This told Windows that output was encoded using the current
system code page. Unless the code page was 65001 (UTF-8), this was a lie.
We write UTF-8 to stdout and stderr, so call "setlocale(LC_ALL, ".UTF-8)"
at startup on Windows. This lets the CRT translate our output correctly
in more cases.
Clarify and expand the OUTPUT section in the tshark man page.
Bug: 16649
Change-Id: If93231fe5b332c292946c7f8e5e813e2f543e799
Reviewed-on: https://code.wireshark.org/review/37560
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The static arrays are supposed to be arrays of const pointers to int,
not arrays of non-const pointers to const int.
Fixing that means some bugs (scribbling on what's *supposed* to be a
const array) will be caught (see packet-ieee80211-radiotap.c for
examples, the first of which inspired this change and the second of
which was discovered while testing compiles with this change), and
removes the need for some annoying casts.
Also make some of those arrays static while we're at it.
Update documentation and dissector-generator tools.
Change-Id: I789da5fc60aadc15797cefecfd9a9fbe9a130ccc
Reviewed-on: https://code.wireshark.org/review/37517
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add some ENC_ values for various flavors of packed BCD, and use that
instead of explicitly calling tvb_bcd_dig_to_wmem_packet_str() and
adding the result.
Change-Id: I07511d9d09c9231b610c121cd6ffb3b16fb017a9
Reviewed-on: https://code.wireshark.org/review/36952
Reviewed-by: Guy Harris <gharris@sonic.net>
They were added in the code, but weren't documented.
Change-Id: Iaa12e2d33aa4a4b889c00a7f10b12b4c9b6e8197
Reviewed-on: https://code.wireshark.org/review/36953
Reviewed-by: Guy Harris <gharris@sonic.net>
Support for the -m (monospace font) flag was removed from Wireshark in
2.3/2.4 in g37252634c4. Remove it from the man page and help output.
Change-Id: Idaafeb6cd30d7deea6086a065168c91affd6f0ad
Reviewed-on: https://code.wireshark.org/review/36926
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Check is enabled by #ifdef ENABLE_CHECK_FILTER
Remaining issues found by this check are fixed here,
along with a documentation note that the entries
are checked in order and the first match is used.
The only issue not yet fixed is in packet-isup.c,
where the spec was not available to me.
Change-Id: Ife747cda9b91a265bc2b81ce0a53f55f3389919e
Reviewed-on: https://code.wireshark.org/review/36708
Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
Commit 3398c2898d duplicated the '-i'
option in the synopsis. Remove this again.
Change-Id: I85fb78515910b11e9dff9b3aa876746b2ff11fa4
Reviewed-on: https://code.wireshark.org/review/36678
Reviewed-by: Anders Broman <a.broman58@gmail.com>
As I said in
https://ask.wireshark.org/question/10361/how-to-properly-use-heuristic-dissector-for-tcp/?answer=10363#post-id-10363
"Should" has multiple meanings; there's "Used to indicate obligation,
duty, or correctness, typically when criticizing someone's actions.", as
in "I think we should trust our people more", and there's "Used to
indicate what is probable.", as in "the bus should arrive in a few
minutes". You're reading it in the latter sense; it was intended in the
former sense.
That sentence should probably be changed to "Wireshark must be then set
up..." to avoid the ambiguity.
Make it so (over half a year later, sigh), and change another case where
"should" is meant in the first sense while we're at it.
Change-Id: I90198d1616619c75802deeeb703ceee0c8bac1bf
Reviewed-on: https://code.wireshark.org/review/36155
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In the README.plugins file there is still mention of autotools related items.
This change removes those lingering references.
Change-Id: I1fc7c6d478a6fc8bbe9481178d9f673aaebcad9f
Reviewed-on: https://code.wireshark.org/review/35843
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Update the Expert Information section of the User's Guide. Use the term
"Expert Information" to describe the dialog and "expert information
item" to describe each generated item. Update related text elsewhere.
Update the expert icon and other parts of the status bar docs.
Change-Id: I0c2cba0cbb3c74a1f6e3a37d4a2a592faccb350f
Reviewed-on: https://code.wireshark.org/review/35462
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Update the minimum version in various documents. Remove some
no-longer-needed code from scripts that call windeployqt.
Change-Id: I16da4bced9780c9f1b1969aae7c52e2fce1968aa
Reviewed-on: https://code.wireshark.org/review/35391
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Documentation of the Tshark and dumpcap command line options between
help text, manual page and user's guide diverged over time. One aspect
of this is the implementation of more long options. This change tries to
update all documentation to be complete and in sync again.
Change-Id: Ie8bee013df8d209080fcf288072774f18f9ff51f
Reviewed-on: https://code.wireshark.org/review/35261
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Generate a dissector based on doc/packet-PROTOABBREV.c.
Change-Id: I9233c1212acb30f7166ba91e39d98bc3fb123731
Reviewed-on: https://code.wireshark.org/review/35062
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Documentation of the Wireshark command line options between help text,
manual page and user's guide diverged over time. One aspect of this is
the implementation of more long options. This change tries to update
all documentation to be complete and in sync again.
Bug: 16168
Change-Id: Id833fbeb14fdb7b3dbc1564504a25d96f4367c91
Reviewed-on: https://code.wireshark.org/review/35047
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
This reverts commit f1285fcf06.
NSIS package is broken with this commit.
Change-Id: Ief22a308edad188fa2d5fab79355f19493359fa6
Reviewed-on: https://code.wireshark.org/review/34758
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
HTML docs are installed to both $docdir and $pkgdatadir. Fix that
to install to $docdir only.
Change-Id: I115158585b6df9170d9a01249adbc8548df91f14
Reviewed-on: https://code.wireshark.org/review/34640
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
The QUIC transport protocol provides a stream, similar to HTTP/2. Make
it possible to look at the stream contents. This can be helpful while
HTTP/3 support is not yet complete.
Known issues that will be addressed in the future:
- If a single packet contains multiple streams, then Follow QUIC Stream
will wrongly include data from streams other than the selected one.
This is tracked by bug 16093 and affects HTTP/2 as well.
- The Substream index menu does not properly filter for available
stream numbers. If a non-existing stream is selected, then changing
to another (potentially valid) index results in the "Capture file
invalid." error. As workaround, clear the display filter first.
- Follow Stream always selects Stream ID 0 instead of the first or
currently selected stream field in a packet. Users should manually
update the stream index as needed.
Change-Id: I5866be380d58c96f0a71a29abdbd1be20ae3534a
Ping-Bug: 13881
Reviewed-on: https://code.wireshark.org/review/34694
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The HTTP/2 protocol multiplexes a single TCP connection into multiple
independent streams. The Follow TCP output can interleave multiple
HTTP/2 streams, making it harder to analyze a single HTTP/2 stream.
Add the ability to select HTTP/2 Streams within a TCP stream.
Internally, the HTTP/2 dissector now stores the known Stream IDs in a
set for every TCP session which allows an amortized O(n) lookup time for
the previous/next/max Stream ID.
[Peter: make the dissector responsible for clamping the HTTP/2 Stream ID
instead of the Qt code, that should permit future optimizations.]
Change-Id: I5d78f29904ae8f227ae36e1a883155c0ed719200
Reviewed-on: https://code.wireshark.org/review/32221
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexander Gryanko <xpahos@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
proto_tree_add_bitmask_len also expects an expert information field
to display in the event that the decodeable length is less than the
specified length.
Bug: 16061
Change-Id: If8061b0754cd6862799ab76bf9c10e16ed5d8f38
Reviewed-on: https://code.wireshark.org/review/34567
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Make it consistent with -z conv,ip and -z endpoints,ip
Bug: 15660
Change-Id: I9a3d2e95fed47231c0bab20e6cf069987eed142f
Reviewed-on: https://code.wireshark.org/review/34426
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add '-J' option to synopsis and reshuffle '-j' to correct place.
Change-Id: I351b3ce464fca3b52a75614e1e8f8c91f9a30df2
Reviewed-on: https://code.wireshark.org/review/34352
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
WIRESHARK_CONFIG_DIR was introduced with Wireshark 3.0 and is more
cross-platform than WIRESHARK_APPDATA. The latter was presumably created
for use by PortableApps. Let's consider that an internal, undocumented
detail that might be change, and document WIRESHARK_CONFIG_DIR instead.
Change-Id: I0042d607b282cc6dee4b017b1e80b44087bd62e9
Reviewed-on: https://code.wireshark.org/review/34113
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Remove some dead links or point them to archive.org while at it. All
updated links have been verified.
Change-Id: Icf02167a13d5fe9dfce39ea57525b3f185554c9d
Reviewed-on: https://code.wireshark.org/review/34028
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This new tap collects credentials (username and paassword)
from the dissectors.
So far, few dissectors have been instrumented:
- http (basic auth)
- http (header auth)
- ftp
Others can be instrumented as well using the same technique.
Tshark has a new option (-z credentials) and Wireshark a new
"tools" menu: the documentation has been updated accordingly.
Change-Id: I2d0d96598c85bb3ea4fb5ec090dd8dc28b481fc9
Reviewed-on: https://code.wireshark.org/review/33453
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Dario Lombardo <lomato@gmail.com>
We removed the "title" member from decode_as_t.
Update the sample code snippet accordingly.
Change-Id: I5d4ba979c955de50287f5b4deea7c64bf96f7d9b
Reviewed-on: https://code.wireshark.org/review/33574
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 15591
Change-Id: Icb8246ba196df026736ce1e54eb2ace2c7cd49b0
Reviewed-on: https://code.wireshark.org/review/33530
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
David Perry