Follow gc7c33b0c8
Change-Id: I54d101f561d4f03dd6e972c8dda3cd6516128de5
Reviewed-on: https://code.wireshark.org/review/11553
Reviewed-by: Michael Mann <mmann78@netscape.net>
Diameter dictionary has been updated with the following AVP values:
1031 Rule-Failure-Code: adden new enum codes.
1082 Credit-Management-Status
1091 TDF-IP-Address
1098 Application-Detection-Information
Change-Id: I2c5c438fa48b9deda4bdc2a046c19b583b5c7763
Reviewed-on: https://code.wireshark.org/review/11524
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add decoding for MB2c specific AVPs according to 3GPP TS 29.468 Rel 12.1.0.
Change-Id: I0b50cacb5a3e7cb32de89b31da24e725361edf80
Reviewed-on: https://code.wireshark.org/review/9756
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use Session-ID as a place holder for grouped AVPs that can hold any AVP and
look up the contents of a couple grouped AVPs whose contents wasn't specified.
Also, update the DTD to allow vendors to not add any AVPs.
Change-Id: Id2852e31cecbcfaf64efb46918101b3a81ed5bdb
Reviewed-on: https://code.wireshark.org/review/8355
Reviewed-by: Anders Broman <a.broman58@gmail.com>
(For whatever reason the Diameter dictionary calls it IPAddress rather than
Address--the latter is what's in the RFCs.)
Change-Id: I5efcffc2a9bced6ba841b09fd83cb3dcd128d440
Reviewed-on: https://code.wireshark.org/review/8341
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The codes were there but the strings got messed up somewhere along the way.
Change-Id: I41cc581dba0c00936737ea77e789cac1aecadf0f
Reviewed-on: https://code.wireshark.org/review/8340
Reviewed-by: Anders Broman <a.broman58@gmail.com>
in base or applications.
(IOW update the DTD to reflect I5119f0dc7f8e3bbf59e2207046a8bb0f42ab0ca1.)
Change-Id: I459b3aac50ce4dabb552e674145d9097920e0a5d
Reviewed-on: https://code.wireshark.org/review/8338
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This also fixes a couple of applications that weren't properly terminated
(as a result of some of my recent changes).
Change-Id: I9662017a81c63aceeb950d3b29cb17dde16d4f0c
Reviewed-on: https://code.wireshark.org/review/8335
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Specifically we put Experimental-Result-Codes specified by 3GPP in the XML file
and let other vendors' codes be handled through a dissector table.
Change-Id: I2c3977fb959ad84faa5cb90aeb3d191c8b465ede
Reviewed-on: https://code.wireshark.org/review/8319
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
AVPs can be grouped by Vendor now (not just by Application).
Move a bunch of vendor-specific Application IDs to the vendor's XML file.
Delete the (basically empty) SKT.xml, ChinaTelecom.xml, and VerizonWireless.xml
files.
Fix a typo: 16777224 is 3GPP Gx, not 3GPP Cx.
Use (derived) type Enumerated (rather than Unsigned32 or Integer32) when the
AVP is of type Enumerated.
Change-Id: I7a9702c0c48dc3fe751ad74413d8ecc040984f1f
Reviewed-on: https://code.wireshark.org/review/8235
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
one (and only one) Application ID list.
This means we don't have to list all the Application IDs several times in the
XML file. Collapse those lists into one (much more complete, now) list while
also fixing URIs for several of the specifications (and making it clear for
others that we don't have access to the specification--by declaring their
URI to be "none").
Add a bunch more entries to the list of application IDs.
Change-Id: Ia5c96b1f6f1fe3a9521b3d70142889e3881fae5e
Reviewed-on: https://code.wireshark.org/review/8147
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Consistently used (derived) type Enumerated (rather than Unsigned32 or
Integer32) when the AVP is of type Enumerated.
Use a uri of "none" when we don't have access to the specification.
Update the URI of an Application or two.
Clean up white space and formatting.
Change-Id: Iad677db186469b7d8c4a23b7a7fca6c357dbc012
Reviewed-on: https://code.wireshark.org/review/8164
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
This allows for a more natural organization of AVP definitions: they can now
be grouped by application (including the base application) or vendor ID. This
means we can stop using the "workaround" (for those vendors who define AVPs
but don't have their own application ID) of finding some random application ID
to put in a vendor-specific xml file just to satisfy the parser.
Rework a couple of Vendor-specific xml files as an example.
Note: this does mean that vendor IDs can no longer be defined inside of the
base or other application. If that's a problem the parser could be made
(through some duplication of code) to understand the old format too.
Change-Id: I5119f0dc7f8e3bbf59e2207046a8bb0f42ab0ca1
Reviewed-on: https://code.wireshark.org/review/8141
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Untested; taken from the document 910-6828-001 Revision A (found on the web).
Change-Id: Ibf312a0a15c5c64ec16e636814febb0e996fe5f2
Reviewed-on: https://code.wireshark.org/review/8110
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Integer32) when the AVP is of type Enumerated.
Just for correctness.
Change-Id: Ia485d6e06ca16d6da82aa5d1b60025120e45242f
Reviewed-on: https://code.wireshark.org/review/8109
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
I4cd9bd7f7219e4d9ff1bb8a71fab32439a8a9a35).
(The nameless application was causing known applications to be reported as
unknown.)
Add code to the Diameter dissector to report such problems at startup (similar
code exists for other entities).
Tweak the parser debug slightly.
Change-Id: I6b28cda8660e6eb96648c7b3697d7fd85151ac96
Reviewed-on: https://code.wireshark.org/review/6927
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
(Later releases have a different AppID.)
Change-Id: I41d4a498461e777f570641936db64d0551e36186
Reviewed-on: https://code.wireshark.org/review/4070
Reviewed-by: Anders Broman <a.broman58@gmail.com>
(The 3GPP2 Ty trace in the menagerie wrongly marks several of these AVPs
as being 3GPP2.)
Change-Id: I27963fbf8e1da51e430c609784e0c8bb4575549d
Reviewed-on: https://code.wireshark.org/review/3912
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
The AVP is defined in 3GPP TS 29.214, Table 5.3.1: Rx specific Diameter AVPs.
Change-Id: Ib0a525f97206ff61bb0d390df81e3d6ebbef59bb
Reviewed-on: https://code.wireshark.org/review/3791
Reviewed-by: Anders Broman <a.broman58@gmail.com>
it was overiding the correct one from dictionary.xml
Change-Id: Ic6073a550a15f56584e214eec8bd79057673c25c
Reviewed-on: https://code.wireshark.org/review/3244
Reviewed-by: Anders Broman <a.broman58@gmail.com>
(Using sed : sed -i '/^\# \$Id\$/,+1 d') (start with dash)
Change-Id: Ia4b5a6c2302f6a531f6a86c1ec3a2f8205c8c2dd
Reviewed-on: https://code.wireshark.org/review/881
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Correct AVP codes 712 and 713, add 714-719.
Add and fix some enum codes.
Update specification version.
From me: Fix up indentation.
svn path=/trunk/; revision=50463
7.2.36 CG-Address AVP
The CG-Address AVP (AVP code 846) is of type Address and holds the IP-address of the charging gateway.
svn path=/trunk/; revision=47492
comment out the older, conflicting ETSI-specified values and use the more
modern ones.
Mark a couple of deprecated values as such (void).
svn path=/trunk/; revision=45251
Updated multiple enumerations (Event-Trigger, Reporting-Level, IP-CAN-Type,
Rule-Failure-Code and RAT-Type) to get them in sync with ETSI TS 129 212
V10.6.0 (2012-03).
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=7727
svn path=/trunk/; revision=44892
Add Ericsson-proprietary AVPs and Result-Codes for SCAP.
Add Huawei as a known vendor.
From me:
Reindent the Ericsson XML file; sort the new AVPs by number.
svn path=/trunk/; revision=43472
Massively reindent dictionary.xml to try to make it more readable
to us humans. Fix some typos too.
Set SVN properties on all the files.
svn path=/trunk/; revision=43160
In line 4722 of dictionary.xml file there is comment:
<-- Requesting-Node-Type is from old (v8.1.0 - v8.2.0) versions of 29.272. -->
This is not a valid XML comment and that line should read:
<!-- Requesting-Node-Type is from old (v8.1.0 - v8.2.0) versions of 29.272. -->
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6858
svn path=/trunk/; revision=41141
Cisco and Vodafone Diameter AVP:s
I have axtracted the relevant vendor AVP:s and separated them out in Vendor specific xml files.
Part of https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5972
svn path=/trunk/; revision=37627