Make the time stamp precision a 4-bit bitfield, so, when combined with
the other bitfields, we have 32 bits. That means we put the flags at
the same structure level as the time stamp precision, so they can be
combined; that gets rid of an extra "flags." for references to the flags.
Put the two pointers next to each other, and after a multiple of 8 bytes
worth of other fields, so that there's no padding before or between them.
It's still not down to 64 bytes, which is the next lower power of 2, so
there's more work to do.
Change-Id: I6f3e9d9f6f48137bbee8f100c152d2c42adb8fbe
Reviewed-on: https://code.wireshark.org/review/31213
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is a breaking change.
prefs_register_filename_preference hasn't been differentiating
between files to be saved and ones to be opened.
On GTK, a neutral dialog is used, so no problems there.
On Qt, a save dialog has been always used, even in dissectors that
were reading configuration files without modification.
prefs_register_filename_preference now takes an argument to indicate
whether UI could be a save dialog with a warning on overwriting
a file, or whether it's a general purpose open file dialog.
Qt now does this. Previously no warning was shown on overwriting a file,
so it may be used for opening files too without irritating the user.
This has been changed, as non-destructive reads should now use
the open dialog.
Dissectors were changed accordingly.
Change-Id: I9087fefa5ee7ca58de0775d4fe2c0fdcfa3a3018
Reviewed-on: https://code.wireshark.org/review/21086
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add a "report a warning message" routine to the "report_err" code in
libwsutil, and rename files and routines appropriately, as they don't
only handle errors any more.
Have a routine read_enabled_and_disabled_protos() that reads all the
files that enable or disable protocols or heuristic dissectors, enables
and disables them based on the contents of those files, and reports
errors itself (as warnings) using the new "report a warning message"
routine. Fix that error reporting to report separately on the disabled
protocols, enabled protocols, and heuristic dissectors files.
Have a routine to set up the enabled and disabled protocols and
heuristic dissectors from the command-line arguments, so it's done the
same way in all programs.
If we try to enable or disable an unknown heuristic dissector via a
command-line argument, report an error.
Update a bunch of comments.
Update the name of disabled_protos_cleanup(), as it cleans up
information for disabled *and* enabled protocols and for heuristic
dissectors.
Support the command-line flags to enable and disable protocols and
heuristic dissectors in tfshark.
Change-Id: I9b8bd29947cccdf6dc34a0540b5509ef941391df
Reviewed-on: https://code.wireshark.org/review/20966
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Bug: 13488
Change-Id: If4717dee805fdb3e910e2ea8ef16352294b305c6
Reviewed-on: https://code.wireshark.org/review/20575
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: Iba6238988ded675cba328ab512232d1919d93b4a
Reviewed-on: https://code.wireshark.org/review/20415
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
All cases of the "original" format_text have been handled to add the
proper wmem allocator scope. Remove the "original" format_text
and replace it with one that has a wmem allocator as a parameter.
Change-Id: I278b93bcb4a17ff396413b75cd332f5fc2666719
Reviewed-on: https://code.wireshark.org/review/19884
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This allows for a wmem_allocator for users of format_text who want
it (dissectors for wmem_packet_scope()). This lessens the role of
current format_text functionality in hopes that it will eventually
be replaced.
Change-Id: I970557a65e32aa79634a3fcc654ab641b871178e
Reviewed-on: https://code.wireshark.org/review/19855
Reviewed-by: Michael Mann <mmann78@netscape.net>
Register all reassembly tables with a central unit, allowing the
central unit to have the callback that initializes and destroys
the reassembly tables, rather than have dissectors do it individually.
Change-Id: Ic92619c06fb5ba6f1c3012f613cae14982e101d4
Reviewed-on: https://code.wireshark.org/review/19834
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I3a6c43f617f7634ce0007bc75aa6293eb5e1cad6
Reviewed-on: https://code.wireshark.org/review/18302
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Tested-by: Michael Mann <mmann78@netscape.net>
This patch introduces new APIs to allow dissectors to have a preference for
a (TCP) port, but the underlying data is actually part of Decode As functionality.
For now the APIs are intentionally separate from the regular APIs that register a
dissector within a dissector table. It may be possible to eventually combine the
two so that all dissectors that register with a dissector table have an opportunity
to "automatically" have a preference to adjust the "table value" through the
preferences dialog.
The tcp.port dissector table was used as the guinea pig. This will eventually be
expanded to other dissector tables as well (most notably UDP ports). Some
dissectors that "shared" a TCP/UDP port preference were also converted. It also
removed the need for some preference callback functions (mostly when the callback
function was the proto_reg_handoff function) so there is cleanup around that.
Dissectors that has a port preference whose default was 0 were switched to using
the dissector_add_for_decode_as_with_preference API rather than dissector_add_uint_with_preference
Also added comments for TCP ports used that aren't IANA registered.
Change-Id: I99604f95d426ad345f4b494598d94178b886eb67
Reviewed-on: https://code.wireshark.org/review/17724
Reviewed-by: Michael Mann <mmann78@netscape.net>
Many of the complaints from checkAPI.pl for use of printf are when its embedded
in an #ifdef and checkAPI isn't smart enough to figure that out.
The other (non-ifdef) use is dumping internal structures (which is a type of
debug functionality)
Add a "ws_debug_printf" macro for printf to pacify the warnings.
Change-Id: I63610e1adbbaf2feffb4ec9d4f817247d833f7fd
Reviewed-on: https://code.wireshark.org/review/16623
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I351f6c9a6d81ca8c1122d8400ea8f6a388c48450
Reviewed-on: https://code.wireshark.org/review/14929
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This saves many dissectors the need to find the data dissector and store a handle to it.
There were also some that were finding it, but not using it.
For others this was the only reason for their handoff function, so it could be eliminated.
Change-Id: I5d3f951ee1daa3d30c060d21bd12bbc881a8027b
Reviewed-on: https://code.wireshark.org/review/14530
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
That removes most of the uses of the frame number field in the
frame_data structure.
Change-Id: Ie22e4533e87f8360d7c0a61ca6ffb796cc233f22
Reviewed-on: https://code.wireshark.org/review/13509
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: Ie39ef054a4a942687bd079f3a4d8c2cc55d5f22c
Reviewed-on: https://code.wireshark.org/review/12485
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Added IP address and port number to the comp_req_list_entry so
get_mfn_from_fn_and_reqid can check for matching IP and port number
when searching for the reply to a request.
Change-Id: Iad00bca5c1104cf8c335001f84264fe55d2e45fc
Reviewed-on: https://code.wireshark.org/review/11599
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
btw the exception was thrown only if tree!=NULL...
Change-Id: I3a0d46de715df6ada5fda3db126ade210a6201c1
Reviewed-on: https://code.wireshark.org/review/11122
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Also make it configurable through preferences
Bug: 11508
Change-Id: Ic2cc085376d61892996b33ed45f906e4b3ff19da
Reviewed-on: https://code.wireshark.org/review/10449
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
The preferences are still supported for backwards compatibility, but the heuristic_protos file has final say on the "preference" to enable/disable a heuristic dissector.
Also add parameter to heur_dissector_add() for the "default" enable/disable of a heuristic dissector. With this parameter, a few more (presumably weak) heuristic dissectors have been "registered" but of course default to being disabled.
Change-Id: I51bebb2146ef3fbb8418d4f5c7f2cb2b58003a22
Reviewed-on: https://code.wireshark.org/review/9610
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This allows better presentation of heuristic dissectors to the end user.
Change-Id: I2ff3985ab914e83c2989880cc0c7b9904045b3f6
Reviewed-on: https://code.wireshark.org/review/9602
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Three of them are trivial movements, the smb-sidsnooping is an odd one.
Ronnie Sahlberg disabled the sid_name_snooping feature on 9 July 2007.
There is a preference to override it though... For now add a TODO
marker and ensure that the hash tables are always initialized.
Change-Id: I61f5e215c9fa72a6785fb48eaa2d50c1975d7483
Reviewed-on: https://code.wireshark.org/review/9227
Reviewed-by: Michael Mann <mmann78@netscape.net>
*seq[slength - 1] means *(seq[slength - 1]), where seq points to a
"const gchar *", so it fetches the pointer at an offset of slength - 1
from the pointer to which seq points, and dereferences that pointer.
What's wanted is (*seq)[slength - 1], i.e. fetch the pointer to which
seq points, and fetch the byte at an offset of slength - 1 from the byte
to which said pointer points.
Change-Id: I7246f5e6093d035bad59be530893f3fc54dad97e
Reviewed-on: https://code.wireshark.org/review/8441
Reviewed-by: Guy Harris <guy@alum.mit.edu>
CDR strings appear to be both counted *and* NULL-terminated in many cases,
which is rather weird, so if we see a NULL-terminator, ignore it in the count;
otherwise we print a trailing '\000' on all the strings we put in the tree.
Bug: 11126
Change-Id: I45b6b414683a6f646d37c2e2001b7319d5c80be5
Reviewed-on: https://code.wireshark.org/review/8390
Reviewed-by: Anders Broman <a.broman58@gmail.com>
One structure and one hash table with very simple uses. Fixes a memory leak.
Change-Id: I727b7d5b0b17c2fcfaaad57797d11090e392253b
Ping-Bug: 11123
Reviewed-on: https://code.wireshark.org/review/8088
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Evan Huus <eapache@gmail.com>
Move the req_id field to the "message-dependent data" section of the header
struct, since in the spec I found it is not specified in the common GIOP header
(even though it appears to be present in all message types). Regardless, this
better reflects the fact that it is not initialized by the primary tvb_memcpy,
only the independent fields are.
Initialize it and use it rather than creating a local for no reason; fixes the
possibility of using it uninitialized.
Bug: 11123
Change-Id: I3bae1df5123fbb1f2b86f7c42cee392b5b045c4f
Reviewed-on: https://code.wireshark.org/review/8087
Reviewed-by: Evan Huus <eapache@gmail.com>
Support for the reassembly of GIOP Fragment message types.
A new bool preference (giop.reassemble) is introduced to control reassembly
and it is enabled by default.
Change-Id: I10ca51f745710dca3b57a03cc89126f7b1dc06b4
Reviewed-on: https://code.wireshark.org/review/7966
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Provide a way for Lua-based dissectors to invoke tcp_dissect_pdus()
to make TCP-based dissection easier.
Bug: 9851
Change-Id: I91630ebf1f1fc1964118b6750cc34238e18a8ad3
Reviewed-on: https://code.wireshark.org/review/6778
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Hadriel Kaplan <hadrielk@yahoo.com>
Also replaced comments mentioning se_alloc memory with wmem_file_scope, since it's more accurate.
It seems that many of the TShark stat taps may be leaking memory, because the hash tables created by the taps don't get a chance to be freed. Somewhat academic since TShark exits shortly after displaying any stats, but a leak none the less.
Change-Id: I8ceecbd00d65b3442dc02d720b39c2e15aa0c8a6
Reviewed-on: https://code.wireshark.org/review/6557
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
- Use report_...failure() (in most cases).
- Also: Do some misc fixes in certain disectors
- re-arrange order of #includes
- Fixup preferences help text
Change-Id: I385f6f97257f365f53ce611df02f57f9257dc5f9
Reviewed-on: https://code.wireshark.org/review/6039
Petri-Dish: Bill Meier <wmeier@newsguy.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Make the GIOP TCP-based dissector correctly handle multiple GIOP
messages in a TCP segment, and when the second is malformed.
Bug: 10760
Change-Id: Ie82a1d72a43218e50c6856028a5ef25ad1f0c340
Reviewed-on: https://code.wireshark.org/review/6025
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Second batch (packet-eth.c -> packet-icmpv6.d).
Will look at cleaning up and committing script afterwards.
Change-Id: I14295758b81a59115d8c88899f166cc3d5d17594
Reviewed-on: https://code.wireshark.org/review/6013
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
Specifically:
- Set packet.h to be the first wireshark #include after
config.h and "system" #includes.
packet.h added as an #include in some cases when missing.
- Remove some #includes included (directly/indirectly) in
packet.h. E.g., glib.h.
(Done only for those files including packet.h).
- As needed, move "system" #includes to be after config.h and
before wireshark #includes.
- Rework various #include file specifications for consistency.
- Misc.
Change-Id: Ifaa1a14b50b69fbad38ea4838a49dfe595c54c95
Reviewed-on: https://code.wireshark.org/review/5923
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Bill Meier <wmeier@newsguy.com>
(for some dissectors which fetch all other integral fields using
ENC_BIG_ENDIAN).
Change-Id: Ic18e3172aad76af12b12d6732c88497be22aed56
Reviewed-on: https://code.wireshark.org/review/5748
Reviewed-by: Bill Meier <wmeier@newsguy.com>
They don't handle values outside the range -1 to 127, and their behavior
is locale-dependent. Use g_ascii_isXXX() and g_ascii_toXXX() instead of
isXXX() and toXXX().
If you're checking for printable ASCII, don't use isascii() and don't
use iscntrl(), use g_ascii_isprint(). If you're checking for graphical
ASCII, i.e. printable ASCII except for a space, use g_ascii_isgraph().
Use ws_xton() to convert a hex digit character to the corresponding
numeric value.
Change-Id: Id3039bc586fbf66d8736c2df248c790c0d7a2330
Reviewed-on: https://code.wireshark.org/review/4851
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I6f1710a093fc548c718defa9b40ab68877ede977
Reviewed-on: https://code.wireshark.org/review/3470
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: If110de1e0555637264f86f1508858d569871a9c7
Reviewed-on: https://code.wireshark.org/review/2675
Reviewed-by: Michael Mann <mmann78@netscape.net>
Hopefully that name makes it clear what the routiner's purpose is, and
will encourage people to use it rather than using dissector_add_uint()
with a bogus integer value.
Change-Id: Ic5be456d0ad40b176aab01712ab7b13aed5de2a8
Reviewed-on: https://code.wireshark.org/review/2483
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Guy Harris