Change-Id: I5de4c34e2acafbe47a8ca3f07040a774e72d0d3e
Reviewed-on: https://code.wireshark.org/review/6787
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: Ifa96dc38a277b86c28f762489251dcc595afae67
Reviewed-on: https://code.wireshark.org/review/6603
Reviewed-by: Michael Mann <mmann78@netscape.net>
Not all changes were able to remove their corresponding tvb_get_ptr, because there are other API dependent on the (tvb_get)pointer, but future iterations optimizing those other APIs will then be able to remove it.
Change-Id: Id7cefd440b81834de1d1aace7cd0789b1c871a22
Reviewed-on: https://code.wireshark.org/review/6358
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
"stat name" has been official changed to "endpoints" for all dissectors, rather than a mixture of "host"/"endpoints" based on dissector.
Change-Id: If34bcb5165b493948e784ba038ab202803a59843
Reviewed-on: https://code.wireshark.org/review/6154
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
packet-ip.c: In function 'dissect_ip':
packet-ip.c:2297: warning: 'cur_rt' may be used uninitialized in this function
packet-ip.c:2297: note: 'cur_rt' was declared here
Change-Id: I97fe33d2a01e982f057cce6d68f64378727be2da
Reviewed-on: https://code.wireshark.org/review/6073
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Packet scoped memory cannot be used here; let's use the pinfo pool
Change-Id: If76605f7a3021f5900fd46ce7d1c642a518c902f
Reviewed-on: https://code.wireshark.org/review/6061
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Change-Id: I40d0c8253743183aecef252040b7dd6742ae5c71
Reviewed-on: https://code.wireshark.org/review/5934
Reviewed-by: Michael Mann <mmann78@netscape.net>
Third batch (packet-icmpv6.c -> packet-mac-lte.c).
Will look at cleaning up and committing script afterwards.
Change-Id: Ib91e36ad200db01c3000605f6a7a21125b96a640
Reviewed-on: https://code.wireshark.org/review/6018
Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com>
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
Specifically:
- Set packet.h to be the first wireshark #include after
config.h and "system" #includes.
packet.h added as an #include in some cases when missing.
- Remove some #includes included (directly/indirectly) in
packet.h. E.g., glib.h.
(Done only for those files including packet.h).
- As needed, move "system" #includes to be after config.h and
before wireshark #includes.
- Rework various #include file specifications for consistency.
- Misc.
Change-Id: Ifaa1a14b50b69fbad38ea4838a49dfe595c54c95
Reviewed-on: https://code.wireshark.org/review/5923
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Bill Meier <wmeier@newsguy.com>
This allows dissector lists to be looked up by name, so they can be
shared by multiple dissectors.
(This means that there's no "udplite" heuristic dissector list, but
there shouldn't be one - protocols can run atop UDP or UDPLite equally
well, and they share a port namespace and uint dissector table, so they
should share a heuristic dissector table as well.)
Change-Id: Ifb2d2c294938c06d348a159adea7a57db8d770a7
Reviewed-on: https://code.wireshark.org/review/5936
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I5868a40b71a989a3a1522cb091064bb0aaec6daf
Reviewed-on: https://code.wireshark.org/review/5828
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Have dissectors register their desire to be part of "color" conversation filters and have the GUI use that registered list. GUI actually using API will come in a separate commit.
Change-Id: I5ffe922d97894fe7bf3182056b76ab5839a9461a
Reviewed-on: https://code.wireshark.org/review/5658
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
All situations can be handled with "shimmed" dissector functions.
Change-Id: Ic85483b32d99d3270b193c9f6b29574d8fad46a8
Reviewed-on: https://code.wireshark.org/review/5327
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Change-Id: I189a5b2d5f769395fa5e387f8be49b81903fb252
Reviewed-on: https://code.wireshark.org/review/5262
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Id72fcbe74b91b4eb25fb4d3f3d47a1d53c2857b2
Reviewed-on: https://code.wireshark.org/review/5212
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I60fd9c6c486b9b3b90e32fb9ccce3973569cc2ee
Reviewed-on: https://code.wireshark.org/review/5204
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
Change-Id: I81fc364cbff3c5b305d61b2d444bf8599fbd19e7
Reviewed-on: https://code.wireshark.org/review/4631
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
For:
- FT_BYTES: Always use just ENC_NA
- integral/floating (other than FT_[U]INT8): Do ENC_NA --> ENC_BIG_ENDIAN
Also:
- FT_UINT... --> FT_UINT8 in a few cases (to match proto_tree_add_item...)
- Change one case of incorrect '||' to '|'
Change-Id: I427e0e61618ff8faf55691c8a695930f67d455b0
Reviewed-on: https://code.wireshark.org/review/4184
Reviewed-by: Bill Meier <wmeier@newsguy.com>
1- removed unnecessary include <wiretap/erf.h>
2- used fall through in protocol switch case instead of calling same
function with same params.
fixes/changes after review with Evan Huus, changes ETH/IPv4/IPv6/Infiniband/InfinibandLink
to use dissector table instead of direct function calls.
other protocols should be called in the same way, we'll do it when have
the time.
instead of calling subdissector directly from packet-erf.c code it's
easier to declare this and each time we need to register a new
protocol over erf format we sould easily extend it from the protcol module
instead using "dissector_add_uint()" function.
the change is still backward compatible, if no upper protocol is
registered for the specifc type an old fasion direct function call
is performed.
Change-Id: I3ae1ccfdd49ab8f90667185296cc950dc2184475
Reviewed-on: https://code.wireshark.org/review/3670
Petri-Dish: Evan Huus <eapache@gmail.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This is very similar in architecture to the changes made to the Conversation table functionality. Since all conversations have endpoints/hostlists, the "registered" list is shared for both.
Change-Id: Ie8c6910a68a1b3f27c5b18c4494f49b9404a7b31
Reviewed-on: https://code.wireshark.org/review/3214
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add macros to set entries of a vec_t, one for use when you have a
pointer to private data, and one for use when you have data in a tvbuff.
The latter wraps the use of tvb_get_ptr(), so that you're not directly
calling it in a dissector.
Move ip_checksum() to epan/in_cksum.c, and add an ip_checksum_tvb() that
wraps the use of tvb_get_ptr().
In the CARP dissector, give the length variable an unsigned type -
there's no benefit to it being signed, and that requires some casts to
be thrown around.
In the DCCP dissector, check only against the coverage length to see if
we have enough data, combine the "should we check the checksum?" check
with the "*can* we check the checksum?" check in a single if, and throw
a dissector assertion if the source network address type isn't IPv4 or
IPv6.
Get rid of inclues of <epan/in_cksum.h> in dissectors that don't use any
of the Internet checksum routines.
In the HIP dissector, make sure we have the data to calculate the
checksum before doing so.
Change-Id: I2f9674775dbb54c533d33082632809f7d32ec8ae
Reviewed-on: https://code.wireshark.org/review/3517
Reviewed-by: Guy Harris <guy@alum.mit.edu>
I intentionally left the fields displayed alone (so they don't exactly match Wireshark GUI), because as Guy points out in bug 6310, not sure its A Bug or A Feature. But at least all types of conversations allowed are in sync with Wireshark GUI.
Bug:6310
Change-Id: I722837df510a39dadc1f9a07a99275509516698c
Reviewed-on: https://code.wireshark.org/review/3212
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Refactor (non-GUI) conversation table functionality from gtk/Qt to epan. Also refactor "common GUI" conversation table functionality.
The idea is to not have to modify the GUI when a dissector adds a new "conversation type"
Change-Id: I11f08d0d7edd631218663ba4b902c4a4c849acda
Reviewed-on: https://code.wireshark.org/review/3113
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Hopefully that name makes it clear what the routiner's purpose is, and
will encourage people to use it rather than using dissector_add_uint()
with a bogus integer value.
Change-Id: Ic5be456d0ad40b176aab01712ab7b13aed5de2a8
Reviewed-on: https://code.wireshark.org/review/2483
Reviewed-by: Guy Harris <guy@alum.mit.edu>
bit decoding for these values.
Change-Id: I7ab6c4badf5b66d6f434a47523e2b35730ecb65d
Reviewed-on: https://code.wireshark.org/review/2338
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
which can be used to call the found heuristic dissector on the next pass.
Introduce call_heur_dissector_direct() to be used to call a heuristic
dissector which accepted the frame on the first pass.
Change-Id: I524edd717b7d92b510bd60acfeea686d5f2b4582
Reviewed-on: https://code.wireshark.org/review/1697
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This patch adds a new "ip.checksum_calculated" field that can be used
for display in a column.
Based on d7c4bde279 ("tcp: display
calculated checksum").
Change-Id: Ide5eb6640d51ded88b1df309092a0a3aaf482b03
Reviewed-on: https://code.wireshark.org/review/1676
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
This cleans up the implementation of the extension header, but also allows Decode As functionality for Next Header fields. This allows "old" SHIM6 IP protocol number (not IANA registered) to still be dissected.
bug:9995
Change-Id: I6f29a1f7db144478c5b6416d27da2c9c5a7a1de1
Reviewed-on: https://code.wireshark.org/review/1378
Reviewed-by: Michael Mann <mmann78@netscape.net>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Offloading seems to be very common nowadays and having this option
enabled by default generates a lot of false positives. Suggested by
Laura Chappell.
Change-Id: I285f218efb3c9f164d8ad7a6d6de8270e442ffff
Reviewed-on: https://code.wireshark.org/review/426
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Part of the fix includes having the IPv6 dissector populate as much of a ws_ip structure as possible to pass to subdissectors of the "ip.proto" table, so the ttl value can be picked up.
svn path=/trunk/; revision=53522
The basic idea behind this design is to have dissectors register with a "decode as list" with their name and dissector table. When "Decode As" dialog is launched, any "registered" dissector found in the packet will cause a tab to be created in the dialog.
This patch includes just the dissector portion of the functionality (minus packet-dcerpc.[ch] because it has hooks to the current GUI)
svn path=/trunk/; revision=53445
protocol IDs. This is substantially more efficient, which means we can build it
all the time rather than only if tree (in my benchmarks the extra time taken is
not large enough to be statistically significant even over tens of thousands of
packets).
This fixes what was probably a bug in btobex that relied on layer_names for
non-tree dissection. It also enables a much simpler fix for
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9303
svn path=/trunk/; revision=53089
1. Case sensitivity differences between hf_ field name and formatted string.
2. Unnecessary whitespace between hf_ field name and colon in formatted string
There are cases where the hf_ field name doesn't quite match the proto_tree_add_uint_format, but it's close enough that one of them should be "right", I'm just not sure which is, I just know the string in proto_tree_add_uint_format is the one displayed.
svn path=/trunk/; revision=52098
The script didn't catch as many as I would have liked, but it's a start.
The most common (ab)use of proto_tree_add_uint_format was for appending strings to CRC/checksum values to note good or bad CRC/checksum.
svn path=/trunk/; revision=52045
Michael Mann