All files:
- Replace types from sys/types.h by those from glib.h
- Replace ntoh family of macros from netinet/in.h and winsock2.h
by g_ntoh family from glib.h
- Remove now unneeded includes of sys/types.h, netinet/in.h and
winsock2.h
wtap.h
Move includes to the top
svn path=/trunk/; revision=5909
Allow "-" as the output file name in Wiretap, referring to the
standard error.
Optimize the capture loop.
Fix some of the error-message printing code in Ethereal and Tethereal.
Have Wiretap check whether it can seek on a file descriptor, and pass
the results of that test to the file-type-specific "open for output"
routine. Have the "open for output" routines for files where we need to
seek when writing the file return an error if seeks don't work.
svn path=/trunk/; revision=5884
the internal z_err value for the stream if an "fseek()" call it makes
fails, so that if "gzerror()" is subsequently called, it returns Z_OK
rather than an error.
To work around this, we pass "file_seek()" an "int *err", and have the
with-zlib version of "file_seek()" check, if "gzseek()" fails, whether
the return value of "file_error()" is 0 and, if so, have it return
"errno" instead.
svn path=/trunk/; revision=5642
into Wiretap, so that if you read a frame from Wiretap you have what
traffic type information could be gleaned from the information in the
capture file, and can write the frame out to a capture file where the
file contains some or all of that information without having to
determine it outside of Wiretap.
svn path=/trunk/; revision=5314
just an image of the ATM Sniffer data. This means that Ethereal doesn't
have to know any ATM Sniffer-specific details (that's all hidden in
Wiretap), and allows us to add to that pseudo-header fields, traffic
types, etc. unknown to ATM Sniffers.
Have Wiretap map VPI 0/VCI 5 to the signalling AAL - for some capture
files, this might not be necessary, as they may mark all signalling
traffic as such, but, on other platforms, we don't know the AAL, so we
assume AAL5 except for 0/5 traffic. Doing it in Wiretap lets us hide
those details from Ethereal (and lets Ethereal interpret 0/5 traffic as
non-signalling traffic, in case that happens to be what it is).
We may know that traffic is LANE, but not whether it's LE Control or
emulated 802.3/802.5; handle that case.
svn path=/trunk/; revision=5302
an "err" argument that points to an "int" into which to put an error
code if it fails.
Check for errors in one call to it, and note that we should do so in
other places.
In the "wtap_seek_read()" call in the TCP graphing code, don't overwrite
"cfile.pseudo_header", and make the buffer into which we read the data
WTAP_MAX_PACKET_SIZE bytes, as it should be.
In some of the file readers for text files, check for errors from the
"parse the record header" and "parse the hex dump" routines when reading
sequentially.
In "csids_seek_read()", fix some calls to "file_error()" to check the
error on the random stream (that being what we're reading).
svn path=/trunk/; revision=4874
scripts, and check in changes to add _U_ to some unused arguments (some
other should perhaps be used, so we leave the _U_ out so that the
warnings serve as a reminder to check those).
svn path=/trunk/; revision=4847
non-existent functions.
Remove the "filetype" argument from the "can_write_encap" functions for
particular capture file types - the argument value is implicit, in that
the routine being called is the routine for that particular file type.
svn path=/trunk/; revision=4823
reading the capture file. Have callers of "wtap_snapshot_length()"
treat a value of 0 as "unknown", and default to WTAP_MAX_PACKET_SIZE (so
that, when writing a capture file in a format that *does* store the
snapshot length, we can at least put *something* in the file).
If we don't know the snapshot length of the current capture file, don't
display a value in the summary window.
Don't use "cfile.snap" as the snapshot length option when capturing -
doing so causes Ethereal to default, when capturing, to the snapshot
length of the last capture file that you read in, rather than to the
snapshot length of the last capture you did (or the initial default of
"no snapshot length").
Redo the "Capture Options" dialog box to group options into sections
with frames around them, and add units to the snapshot length, maximum
file size, and capture duration options, as per a suggestion by Ulf
Lamping. Also add units to the capture count option.
Make the snapshot length, capture count, maximum file size, and capture
duration options into a combination of a check box and a spin button.
If the check box is not checked, the limit in question is inactive
(snapshot length of 65535, no max packet count, no max file size, no max
capture duration); if it's checked, the spinbox specifies the limit.
Default all of the check boxes to "not checked" and all of the spin
boxes to small values.
Use "gtk_toggle_button_get_active()" rather than directly fetching the
state of a check box.
svn path=/trunk/; revision=4709
which we store it a "size_t", and then fix up the bugs that were
revealed by the compiler warnings that produced - "fwrite()" returns 0,
not a negative number, on an I/O error.
Fix up some other items to have type "size_t", or to have various
unsigned types, while we're at it, to squelch compiler warnings.
svn path=/trunk/; revision=3867
were just DLPI data link types, and didn't know that the list had
expanded at some point and that Sun *used* some of the new types (e.g.,
in atmsnoop), or decided on their own to go beyond those types to encode
an Oh-So-Useful link speed indication, or just didn't *care* that they
were just DLPI data link types.
Therefore, we have to map Shomiti link types to wiretap types using a
different mapping table. For now, we assume files with a version number
of 2 are snoop files, and version numbers of 3, 4, and 5 are Shomiti
files; Shomiti claims to use a version number of 2 as well, but to
determine whether a file with a version number of 2 is a snoop file or a
Shomiti file requires that we look at the header of the first packet and
assume that if there's more than 3 bytes of padding it's a Shomiti file.
The return value from "fwrite()" is a "size_t"; make the variable into
which we store it a "size_t", and then fix up the bugs that were
revealed by the compiler warnings that produced - "fwrite()" returns 0,
not a negative number, on an I/O error.
svn path=/trunk/; revision=3866
beginning of the file before reading anything from the file is bogus -
do that in the loop that tries each of the open routines, instead.
(They may have to reset the seek pointer later if, for example, the
capture file begins with the first packet, and the "open()" routine
looks at that packet to try to guess whether the packet is in the file
format in question.)
Set "wth->data_offset" to 0 while you're at it, so capture file readers
don't have to do that, either.
svn path=/trunk/; revision=3123
pseudo_header.
Use generic "p2p_phdr" instead of "lapd_phdr". Modify toshiba.c and
packet-lapd.c to take that into account.
Add frame.p2p_dir, a filterable field, 0=sent, 1=recvd
Make p2p_dir available in packe_info, as I think it will be needed
in VJ COMP and UNCOMP dissection.
Rename WTAP_ENCAP_TR to WTAP_ENCAP_TOKEN_RING.
Mention pppd-log support in man page.
Mention atmsnoop in README.
svn path=/trunk/; revision=2455
file header to 4; fortunately, as they appear to put their extensions to
snoop into the padding at the end of the record, all their capture files
look alike to programs such as snoop and Ethereal that ignore the
padding, so we can just treat version 4 just like version 2 (unless and
until Brent decides a new snoop format is called for, changes the record
header, and picks a version number that's the same as one used by
Shomiti).
svn path=/trunk/; revision=2447
a "keep reading" boolean value is returned from the function.
This avoids having to hack around the fact that some file formats truly
do have records that start at offset 0. (i4btrace and csids have no
file header. Neither does the pppdump-style file that I'm looking at right now).
svn path=/trunk/; revision=2392
to that file, leave public definitions in wtap.h.
Rename "union pseudo_header" to "union wtap_pseudo_header".
Make the wtap_pseudo_header pointer available in packet_info struct.
svn path=/trunk/; revision=1989
"FILE_T" is either a "gzFile" or a "FILE *", depending on whether zlib
support is enabled or not). Fix various function declarations and
definitions.
svn path=/trunk/; revision=1984
there's no need to keep it around in memory - when the frame data is
read in when handing a frame, read in the information, if any, necessary
to reconstruct the frame header, and reconstruct it. This saves some
memory.
This requires that the seek-and-read function be implemented inside
Wiretap, and that the Wiretap handle remain open even after we've
finished reading the file sequentially.
This also points out that we can't really do X.25-over-Ethernet
correctly, as we don't know where the direction (DTE->DCE or DCE->DTE)
flag is stored; it's not clear how the Ethernet type 0x0805 for X.25
Layer 3 is supposed to be handled in any case. We eliminate
X.25-over-Ethernet support (until we find out what we're supposed to
do).
svn path=/trunk/; revision=1975
capture file for an unsupported link-layer encapsulation type (as the
nettl reader does), and report it correctly if it occurs on an open or
read attempt rather than a save attempt.
svn path=/trunk/; revision=1647
hideous problem on FreeBSD 3.[23] (and perhaps other BSDs) if
HAVE_UNISTD_H is defined before "zlib.h" is included, turn "file_seek()"
into a subroutine defined in a file that *undefines* HAVE_UNISTD_H
before including "zlib.h", so that the *only* call to "gzseek()" is made
from a file that does not have HAVE_UNISTD_H defined when it includes
"zlib.h".
Move "file_error()" to that file while you're at it, so it holds all the
wrappers that hide the presence or absence of zlib from routines to read
capture files.
Turn "file.h", which declared those wrapper functions as well as wrapper
macros, into "file_wrapper.h" - it belongs with the "file_wrapper.c"
file that defines the wrapper functions, not with "file.c" which handles
higher-layer file access functions.
Remove the comment in "configure.in" that explained why defining
HAVE_UNISTD_H was a bad idea, as we're not obliged to define it and work
around the problem. (The comment in "file_wrapper.c" explains the
workaround.)
svn path=/trunk/; revision=1463
of all the file types in which a file can be saved.
Giving each dumpable file type a routine that checks whether a file of a
given file type and encapsulation can be written lets us hoist some
checks into common code from out of the open routines.
If the "dump close" routine for a dump stream is NULL, have that mean
that there's no action that needs to be taken on a close by the code to
handle that file type; some file types don't need that, as they can be
written purely sequentially.
svn path=/trunk/; revision=1200
files.
Make the return type of a number of routines that return 1 (for "true")
on success and 0 (for "false") on failure to "gboolean", and make the 1's
and 0's TRUEs and FALSEs.
svn path=/trunk/; revision=1194
dissector; I don't think it's guaranteed that even a Sniffer will tell
you that (there may be situations where it can't figure it out, and
where the user didn't tell it), we may need it for "atmsnoop" traffic
and other types of ATM traffic as well, we will probably want to add to
it the ability to let the user specify "virtual circuit X.Y is this kind
of traffic", and we may also have Ethereal try to intuit it based on
previous traffic in the capture (Q.2931 call setup, LANE traffic, etc.).
Don't show the cell count if it's zero - assume that means we don't know
how many cells made up the packet. Also don't show the AAL5 trailer if
the cell count is zero - the ATM Sniffer *might* sometimes supply a cell
count of 0 even if it has the AAL5 trailer, I guess, and we *might* see
some other capture file format that has the AAL5 trailer but no cell
count, but we'll cross that bridge when we come to it.
Add support for "atmsnoop" captures to the code to handle "snoop"
captures.
Use the field in "iptrace" headers that appears to be, in ATM captures,
a direction indicator - we may have the direction backwards, but, as an
STP packet was tagged as a DCE->DTE packet, and as the capturing
machine, which also was presumably the recipient of the packet, was an
AIX box, not a switch or bridge or some piece of networking equipment
such as that, it *probably* wasn't sending the STP packet, it was
probably receiving it.
svn path=/trunk/; revision=1120
Assign a range of Wiretap errors for zlib errors, and have
"wtap_strerror()" use "zError()" to get an error message for
them.
Have the internal "file_error()" routine return 0 for no error
and a Wiretap error code for an error.
svn path=/trunk/; revision=769
same (which raises the question "so why the heck are there two types?" -
note that the way you're supposed to tell Ethernet from 802.3 packets is
by looking at the value of the type/length field; both of them can be
transmitted on the same wire), so we'll treat them the same.
svn path=/trunk/; revision=733
The "fh" member of a "wtap" structure points to something constructed
from the "fd" member of that structure, so that closing the stream
referred to by "fh" also closes the underlying file descriptor; get rid
of an unnecessary close of "wth->fd".
svn path=/trunk/; revision=720
gzip. The zLib library is used for this purpose. If zLib is not available
(or it's use is disabled by the --disable-zlib option to configure), you
can still compile Ethereal but it will be unable to read compressed capture
files.
IMPORTANT:
Now all file accesses to capture files should be done through special macros.
Specifically, for any use of the following functions on capture files, replace them.
The arguments for the right-side functions are exactly the same as for the
original stdio functions.
fopen file_open
fdopen filed_open
fread file_read
fwrite file_write
fseek file_seek
fclose file_close
ferror file_error
svn path=/trunk/; revision=695
don't seek around it - some implementations of the standard I/O library
routines (e.g., the ones in Solaris 2.5.1, at least) appear not to be
clever enough to handle seeks that occur within the buffer by moving the
current buffer position; instead, they do a seek on the underlying file
descriptor *and* appear to throw out the buffer, forcing them to do
another read.
Instead, read it into a buffer.
svn path=/trunk/; revision=626
read, and maintain it ourselves as we read through the file, rather than
calling "ftell()" for every packet we read - "ftell()" may involve an
"lseek()" call, which could add a noticeable CPU overhead when reading a
large file.
svn path=/trunk/; revision=596
"FDDI with the MAC addresses bit-swapped"; whether the MAC addresses are
bit-swapped is a property of the machine on which the capture was taken,
not of the machine on which the capture is being read - right now, none
of the capture file formats we read indicate whether FDDI MAC addresses
are bit-swapped, but this does let us treat non-"libpcap" captures as
being bit-swapped or not bit-swapped independent of the machine on which
they're being read (and of the machine on which they were captured, but
I have the impression they're bit-swapped on most platforms), and allows
us to, if, as, and when we implement packet capture in Wiretap, mark
packets in a capture file written in Wiretap-native format based on the
machine on which they are captured (assuming the rule "Ultrix, Alpha,
and BSD/OS are the only platforms that don't bit-swap", or some other
compile-time rule, gets the right answer, or that some platform has
drivers that can tell us whether the addresses are bit-swapped).
(NOTE: if, for any of the capture file formats used only on one
platform, FDDI MAC addresses aren't bit-swapped, the code to read that
capture file format should be fixed to flag them as not bit-swapped.)
Use the encapsulation type to decide whether to bit-swap addresses in
"dissect_fddi()".
svn path=/trunk/; revision=557
Get rid of WTAP_ENCAP_NONE; replace it with WTAP_ENCAP_UNKNOWN, which
means "I can't handle that file, it's using an encapsulation I don't
support".
Check for encapsulations we don't support, and return an error (as is
already done in "libpcap.c").
Check for too-large packet sizes, and return an error (as is already
done in "libpcap.c").
Print unsigned quantities in Wiretap messages with "%u", not "%d".
svn path=/trunk/; revision=544
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
but does not link. Perhaps someone who understands the MS tools can help
out. I made it link a few months ago, but with different version of glib/gtk+.
I can't remember how I made it link.
Most of the compatibility issues were resolved with adding
#ifdef HAVE_UNISTD_H the the source code. Please be sure to add this to all
future code.
svn path=/trunk/; revision=359
That requires that, in the packet-reading loop, we pass to the callback
routine the offset in the file of a packet's data, because we can no
longer compute that offset by subtracting the size of the captured
packet data from the offset in the file after the data was read -
"snoop" may stick padding in after the packet data to align packet
headers on 4-byte boundaries.
Doing that required that we arrange that we do that for "libpcap"
capture files as well; the cleanest way to do that was to write our own
code for reading "libpcap" capture files, rather than using the
"libpcap" code to do it.
Make "wtap_dispatch_cb()" and "pcap_dispatch_cb()" static to "file.c",
as they're not used elsewhere.
If we're using wiretap, don't define in "file.h" stuff used only when
we're not using wiretap.
Update the wiretap README to reflect Gilbert's and my recent changes.
Clean up some memory leaks in "wiretap/lanalyzer.c" and
"wiretap/ngsniffer.c", where the capture-file-format-specific data
wasn't freed if the open failed.
svn path=/trunk/; revision=91