Support reloading a Lua FileHandler when this is in use for a
loaded capture file. Prompt to save the file if having unsaved
changes because the file must be reloaded.
Fixes#17615
Use compute_options_size() to get the total size of all the options, and
use write_options() to write out the options for those blocks, as we do
for other blocks.
Get rid of wtap_block_option_get_value_size() and
wtap_block_get_options_size_padded(); they're no longer needed, and
their notion of an option's "size" is "size in a pcapng file", so that
doesn't belong in code that's intended to support all file types.
That way, add-on modules to handle block types not handled by the core
pcapng code can use pcap_process_options() to process a block's options
and can use the routines to handle the "standard" option value types to
handle particular options.
Also, allow both everything-is-little-endian and
everything-is-big-endian Custom Block types in pcap_process_options().
Bug 17478 was caused by `wtap_rec.block` being allocated for each
packet, but not freed when it was done being used -- typically at the
end of a loop.
Rather than requiring each caller of `wtap_read()` to know to free a
member of `rec`, I added a new function `wtap_rec_reset()` for a
slightly cleaner API. Added calls to it everywhere that seemed to make
sense.
Fixes#17478
Mostly functioning proof of concept for #14329. This work is intended to
allow Wireshark to support multiple packet comments per packet.
Uses and expands upon the `wtap_block` API in `wiretap/wtap_opttypes.h`.
It attaches a `wtap_block` structure to `wtap_rec` in place of its
current `opt_comment` and `packet_verdict` members to hold OPT_COMMENT
and OPT_PKT_VERDICT option values.
Only a tiny amount of code outside libwiretap needs to know about
pcap/pcapng LINKTYPE_ values, and all that code needs to know is, for a
given LINKTYPE_ value, what the corresponding WTAP_ENCAP_ value is.
Nothing should need to know, for a given WTAP_ENCAP_ value, what its
LINKTYPE_ value is.
Make it the case that nothing *does* need to know, for a given
WTAP_ENCAP_ value, what its LINKTYPE_ value is. Export
wtap_dump_can_write_encap() and use *that*, in the "import hex dump"
code, what formats can be written to a pcap file.
It's *not* for use by plugins, it's *only* for use by existing built-in
file type/subtype modules to provide support for an old deprecated
mechanism in Lua code.
It only registers one file type/subtype, so rename it to
wtap_register_file_type_subtype().
That will also force plugins to be recompiled; that will produce compile
errors for some plugins that didn't change to match the new contents of
the file_type_subtype_info structure.
Also check to make sure that the registered file type/subtype supports
at least one type of block; a file type/subtype that doesn't return
*any* blocks and doesn't permit *any* block types to be written is not
very useful. That should also catch most if not all other plugins that
didn't change to match the new contents of the file_type_subtype_info
structure.
Don't make errors registering a file type/subtype fatal; just complain,
don't register the bogus file type/subtype, and drive on.
Register the pcap and pcapng file types/subtypes rather than hardwiring
them into the table.
Call the registration routines for them directly, rather than through a
generated table; they're always supposed to be there, as some code in
Wireshark either writes only one of those formats or defaults to writing
one of those formats. Don't run their source code through the
registration-routine-finder script.
Have the file type/subtype codes for them be directly exported to the
libwiretap core, and provide routines to return each of them, to be used
by the aforementioned code.
When reporting errors with cfile_write_failure_message(), use
wtap_dump_file_type_subtype() to get the file type/subtype value for the
wtap_dumper to which we're writing, rather than hardcoding it.
Have the "export PDU" code capable of supporting arbitrary file
types/subtypes, although we currently only use pcapng.
Get rid of declarations of now-static can_write_encap and
dump_open routines in various headers.
Instead of a "supports name resolution" Boolean and bitflags for types of
comments supported, provide a list of block types that the file
type/subtype supports, with each block type having a list of options
supported. Indicate whether "supported" means "one instance" or
"multiple instances".
"Supports" doesn't just mean "can be written", it also means "could be
read".
Rename WTAP_BLOCK_IF_DESCRIPTION to WTAP_BLOCK_IF_ID_AND_INFO, to
indicate that it provides, in addition to information about the
interface, an ID (implicitly, in pcapng files, by its ordinal number)
that is associated with every packet in the file. Emphasize that in
comments - just because your capture file format can list the interfaces
on which a capture was done, that doesn't mean it supports this; it
doesn't do so if the file doesn't indicate, for every packet, on which
of those interfaces it was captured (I'm looking at *you*, Microsoft
Network Monitor...).
Use APIs to query that information to do what the "does this file
type/subtype support name resolution information", "does this file
type/subtype support all of these comment types", and "does this file
type/subtype support - and require - interface IDs" APIs did.
Provide backwards compatibility for Lua.
This allows us to eliminate the WTAP_FILE_TYPE_SUBTYPE_ values for IBM's
iptrace; do so.
Provide a wiretap routine to get an array of all savable file
type/subtypes, sorted with pcap and pcapng at the top, followed by the
other types, sorted either by the name or the description.
Use that routine to list options for the -F flag for various commands
Rename wtap_get_savable_file_types_subtypes() to
wtap_get_savable_file_types_subtypes_for_file(), to indicate that it
provides an array of all file type/subtypes in which a given file can be
saved. Have it sort all types, other than the default type/subtype and,
if there is one, the "other" type (both of which are put at the top), by
the name or the description.
Don't allow wtap_register_file_type_subtypes() to override any existing
registrations; have them always register a new type. In that routine,
if there are any emply slots in the table, due to an entry being
unregistered, use it rather than allocating a new slot.
Don't allow unregistration of built-in types.
Rename the "dump open table" to the "file type/subtype table", as it has
entries for all types/subtypes, even if we can't write them.
Initialize that table in a routine that pre-allocates the GArray before
filling it with built-in types/subtypes, so it doesn't keep getting
reallocated.
Get rid of wtap_num_file_types_subtypes - it's just a copy of the size
of the GArray.
Don't have wtap_file_type_subtype_description() crash if handed an
file type/subtype that isn't a valid array index - just return NULL, as
we do with wtap_file_type_subtype_name().
In wtap_name_to_file_type_subtype(), don't use WTAP_FILE_TYPE_SUBTYPE_
names for the backwards-compatibility names - map those names to the
current names, and then look them up. This reduces the number of
uses of hardwired WTAP_FILE_TYPE_SUBTYPE_ values.
Clean up the type of wtap_module_count - it has no need to be a gulong.
Have built-in wiretap file handlers register names to be used for their
file type/subtypes, rather than building the table in init.lua.
Add a new Lua C function get_wtap_filetypes() to construct the
wtap_filetypes table, based on the registered names, and use it in
init.lua.
Add a #define WSLUA_INTERNAL_FUNCTION to register functions intended
only for internal use in init.lua, so they can be made available from
Lua without being documented.
Get rid of WTAP_NUM_FILE_TYPES_SUBTYPES - most code has no need to use
it, as it can just request arrays of types, and the space of
type/subtype codes can be sparse due to registration in any case, so
code has to be careful using it.
wtap_get_num_file_types_subtypes() is no longer used, so remove it. It
returns the number of elements in the file type/subtype array, which is
not necessarily the name of known file type/subtypes, as there may have
been some deregistered types, and those types do *not* get removed from
the array, they just get cleared so that they're available for future
allocation (we don't want the indices of any registered types to changes
if another type is deregistered, as those indicates are the type/subtype
values, so we can't shrink the array).
Clean up white space and remove some comments that shouldn't have been
added.
The "short name" is really just the name, used to look it up. The
"name" is really a description intended solely for human consumption.
Rename the fields, and the functions that access them, to match.
The "description" maintained by Lua for file type handlers is used
*only* for one debugging message; we should probably just eliminate it.
Call it an "internal description" for now.
For most file types, blocks for which we don't have a wtap_block_type_t
aren't "custom", they're just "file-type specific". Add
WTAP_BLOCK_FT_SPECIFIC_REPORT and WTAP_BLOCK_FT_SPECIFIC_EVENT block
types; the "mandatory" part of those blocks includes a
file-type-specific block type value, with specific values assigned to
specific block types (either as part of the file type's definition, or
by us if necessary).
For pcapng files, blocks for which we don't have a wtap_block_type_t are
either "local" (block type has the high-order bit set), are defined in
the current spec but aren't supported yet (which we should fix), or are
*not* defined in the current spec and are *not* "local" (in which case
whoever's using the block number should submit a pull request to the
spec to register the block type *and* give it a specification, so we can
add support). For "local" block types and for not-yet-supported
non-"local" block types, they should be handled as file-type-specific
blocks with the file-type-specific block value being the pcapng block
type code, with plugin support in the pcapng code to read *and* write
those blocks.
Move the structures for the "mandatory" parts of blocks to
wiretap/wtap_opttypes.h, right after the definition of
wtap_block_type_t.
When registering a custom block type, set the block type field of the
wtap_blocktype_t structure. (We may do custom blocks differently, so
this is just for now.)
When registering a standard block type, don't pass in the block type, as
we can just use the type in the wtap_blocktype_t structure.
Instead *_register_plugin() is turned into a noop (with a warning).
The test suit is failing with ENABLE_PLUGINS=Off (it was already failing
before and this patch didn't affect that).
Closes#17202.
Change the data structure for that option to have a type field,
indicating that it's either a pcap filter string or a BPF program,
followed by a union with a string-pointer member for pcap filter strings
and an instruction-count-and-pointer-to-instructions structure for BPF
programs.
Have routines to add, set, and fetch that option that handle that
structure; discard the "generic structured option" routines. That means
there's more type checking possible at compile time.
Add more code to handle BPF programs.
When writing pcapng files, check, both for that option and for string
options, whether the option length is too big for the data to fit in a
pcapng option, and don't write it if it is. (XXX - truncate the data?
Report an error?)
We have wtap_block_set_string_option_value(),
wtap_block_set_string_option_value_format(), and
wtap_block_set_nth_string_option_value(); complete the collection and
win valuable prizes.
Instead of grabbing the set of IDBs found at open time, have a loop
using wtap_get_next_interface_description() to read all unread IDBs run
after opening the input file, after reading a packet from the input
file, and after getting an EOF on the input file.
Add a routine wtap_uses_interface_ids() to check whether the file type
and subtype for a dump file uses interface IDs and requires IDBs. If
so, in the aforementioned loop, add the IDBs to the dump stream.
Add a routine wtap_dump_add_idb() to add IDBs to a dump stream. Have it
call a file-format-specific routine to add the IDBs; the only file type
that supports it is pcapng, and it 1) writes out the IDB and 2) adds it
to the set of IDBs for the stream.
Add a wtap_dump_params_init_no_idbs() routine that prevents the IDBs
from the input file from being used to initialize the output file; use
it in cases where we're using the aforementioned loop to copy over IDBs.
Don't require any IDBs to be present when opening a pcapng file for
writing; 1) the simplest pcapng file has just an SHB in it, 2) that
requirement causes dumps that don't provide IDBs at open time to fail,
and 3) the real issue is that we don't want packets with an interface ID
not corresponding to a known IDB, and we already have a check for that.
(There are some hacks here; eventually, when everything processes the
IDBs in such a loop, we may be able to get rid of the "two favors of
dump parameter initialization" hack.)
Fixes#15844.
Addresses the same issue in #15502, but there are other issues there
that also need to be addressed.
In addition, the merge code also needs to be changed to handle this.
It currently wraps wtap_block_create() and wtap_block_copy(); if there
are no remaining use cases for wtap_block_copy() at some point, it can
just *replace* wtap_block_copy().
In a wtap, keep track of the first interface description not yet fetched
with wtap_get_next_interface_description() and, when
wtap_get_next_interface_description() is called, have it return that
description, as a wtap_block_t for its IDB. If there are no
as-yet-unfetched interface descriptions, return NULL; there may, in the
future, be more interface descriptions for the file, so this should be
called:
* after the file is opened;
* after wtap_read() returns TRUE, indicating that it's returned a
record (and *before* you process the record that wtap_read()
returns, as it might be the interface description for the
interface on which the packet in that record arrived);
* after wtap_read() returns FALSE, indicating an EOF or an error
return (as there might have been interfaces at the end of the
file or before the error point).
At each of those points, the caller should loop until
wtap_get_next_interface_description() returns NULL.
Not used yet (but tested with capinfos, which found a reason why you
have to wait until the end of the file before processing the interface
information - there's now a comment in the code giving that reason).
This will probably be used in the future.
Currently, the only file types that use them are pcapng and IBM's
iptrace; we don't support writing the latter, so this is mainly of
interest for pcapng.
This makes it a bit more obvious what some "is this pcapng?" tests are
really trying to determine, and allows them to automatically support any
new file types that use them.
(With regard to interface descriptions, tere are three types of file:
1) files that contain no interface information;
2) files that contain "just FYI" interface information but that don't
tie packets or other records to particular interfaces;
3) files that contain interface information and tie all packets (and
possibly other records) to an interface.
This tests for files of type 3.)
It generates a fake IDB for files that don't have interface information
and that have a per-file encapsulation type, snapshot length, and time
stamp precision, and adds it to the file's list of IDBs.
Use it for libpcap.
We will use it later for other file formats, so that code such as the
mergecap code to merge into a pcapng file can handle input files that
don't have interface information.
(We should have a way to indicate whether the IDBs are real or fake, so
that capinfos and Statistics > Capture File Properties don't report
meaningless IDB information and make it look as if it's known that the
capture was done on one interface with the properties in question.)
Change-Id: Iec124bf3c7cbd4c69ec2ac7d0dd776e5287f8576
Reviewed-on: https://code.wireshark.org/review/37982
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
Make wtap_file_get_shb() take a section number argument, and update code
that called it. In most cases, we convert the code to iterate over
sections; in cases where a big code change would be required, we
temporarily pass it 0 and mark the code as "needs to be updated for
multiple sections".
Eliminate cf_read_section_comment(); in calls outside file.c, other code
directly calls the libwiretap routines it calls and, inside file.c, we
just transplant the code and then fix it not to assume a single SHB.
Change-Id: I85e94d0a4fc878e9d937088759be04cb004e019b
Reviewed-on: https://code.wireshark.org/review/37000
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
That makes it - and the routines that implement it - work more like the
seek-read routine.
Change-Id: I0cace2d0e4c9ebfc21ac98fd1af1ec70f60a240d
Reviewed-on: https://code.wireshark.org/review/32727
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a new secrets API to the core, one that can outlive the lifetime of
a single capture file. Expose decryption secrets from wiretap through a
callback and let the secrets API route it to a dissector.
Bug: 15252
Change-Id: Ie2f1867bdfd265bad11fc58f1e8d8e7295c0d1e7
Reviewed-on: https://code.wireshark.org/review/30705
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This:
1) means that we don't have to flag the compression argument with a
comment to indicate what it means (FALSE doesn't obviously say "not
compressed", WTAP_UNCOMPRESSED does);
2) leaves space in the interfaces in question for additional compression
types.
(No, this is not part 1 of an implementation of additional compression
types, it's just an API cleanup. Implementing additional compression
types involves significant work in libwiretap, as well as UI changes to
replace "compress the file" checkboxes with something to indicate *how*
to compress the file, or to always use some other form of compression).
Change-Id: I1d23dc720be10158e6b34f97baa247ba8a537abf
Reviewed-on: https://code.wireshark.org/review/30660
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have the routines always take a parameters pointer; pass either null or
a pointer to an initialized-to-nothing structure in cases where we were
calling the non-_ng versions.
Change-Id: I23b779d87f3fbd29306ebe1df568852be113d3b2
Reviewed-on: https://code.wireshark.org/review/30590
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Four variants of wtap_dump_open_ng exists, each of them take the same
three parameters for the SHB, IDB and NRB blocks that has to be written
before packets are even written. Similarly, a lot of tools always create
these arguments based on an existing capture file session (wth).
Address the former duplication by creating a new data structure to hold
the arguments. Address the second issue by creating new helper functions
to initialize the parameters based on a wth. This refactoring should
make it easier to add the new Decryption Secrets Block (DSB).
No functional change intended.
Change-Id: I42c019dc1d48a476773459212ca213de91a55684
Reviewed-on: https://code.wireshark.org/review/30578
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Strip off only extensions that correspond to file types we know about;
QFileInfo::baseName() strips off *all* extensions, where "extension" is
"anything preceded by a .", so it turns foo.bar.pcap.gz into foo, not
foo.bar. We don't want that; instead, we strip off only those
extensions that correspond to file types we know how to read, so we'd
strip off .pcap.gz in foo.bar.pcap.gz, and strip off .pcap in
foo.bar.pcap, leaving foo.bar in both cases.
Change-Id: I5385921ad2f0fef815d52e9902fef15735fd9dae
Reviewed-on: https://code.wireshark.org/review/28636
Reviewed-by: Guy Harris <guy@alum.mit.edu>
wtap_addrinfo_list_empty added by 9bf40d
Change-Id: I461560afe2dcf7da33c5730562d18c15fae9959e
Reviewed-on: https://code.wireshark.org/review/25087
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Put different types of plugins (libwiretap, libwireshark) in different
subdirectories, give libwiretap and libwireshark init routines that
load the plugins, and have them scan the appropriate subdirectories
so that we don't even *try* to, for example, load libwireshark plugins
in programs that only use libwiretap.
Compiled plugins are stored in subfolders of the plugin folders, with
the subfolder name being the Wireshark minor version number (X.Y). There is
another hierarchical level for each Wireshark library (libwireshark, libwscodecs
and libwiretap).
The folder names are respectively plugins/X.Y/{epan,codecs,wiretap}.
Currently we only distribute "epan" (libwireshark) plugins.
Change-Id: I3438787a6f45820d64ba4ca91cbe3c8864708acb
Reviewed-on: https://code.wireshark.org/review/23983
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
The cleanup routine has been added to exit section of the applications.
Those which required a exit restyle have been patched as well.
Change-Id: I3a8787f0718ac7fef00dc58176869c7510fda7b1
Reviewed-on: https://code.wireshark.org/review/19949
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
This is similar to what we have for opening a dump file - one API that
uses the file name as specified, one that creates a temporary file and
provides the file name, and one that uses the standard output.
All of those APIs handle closing the output file.
Change-Id: I56beea7be347402773460b9148ab31a8f8bc51e1
Reviewed-on: https://code.wireshark.org/review/19059
Reviewed-by: Guy Harris <guy@alum.mit.edu>
wtap_get_all_file_extensions_list was renamed in v2.3.0rc0-621-g4a6dde1
ws_strtou* functions were introduced in v2.3.0rc0-544-gba981ac
get_guint32 and get_nonzero_guint32 were added in v2.3.0rc0-595-ge09b03e
Change-Id: I9aea9c48f2da03590952b995fd21cddb17532af0
Reviewed-on: https://code.wireshark.org/review/17629
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Some symbols are marked as appearing in 2.2 intentionally,
because they are cherry-picked to master-2.2.
Change-Id: Ia7807b3bddab0a069812f56c1be2eca8bf7d1cd4
Reviewed-on: https://code.wireshark.org/review/17232
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Petri-Dish: Balint Reczey <balint@balintreczey.hu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Also add a length parameter to wtap_optionblock_set_option_string
Change-Id: I8c7bbc48aa96b5c2a91ab9a17980928d6894f1ee
Reviewed-on: https://code.wireshark.org/review/15505
Reviewed-by: Anthony Coddington <anthony.coddington@endace.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This was inspired by https://code.wireshark.org/review/9729/, but takes it in a different direction where all options are put into an array, regardless of whether they are "standard" or "custom". It should be easier to add "custom" options in this design. Some, but not all blocks have been converted.
Descriptions of some of the block options have been moved from wtap.h to pcapng.h as it seems to be the one that implements the description of the blocks.
Also what could be added/refactored is registering block behavior.
Change-Id: I3dffa38f0bb088f98749a4f97a3b7655baa4aa6a
Reviewed-on: https://code.wireshark.org/review/13667
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Stig Bjørlykke