The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Have the routines that create them take a pointer to a struct
packet_provider_data, store that in the tvbuff data, and use it to get
the wtap from which packets are being read.
While we're at it, don't include globals.h in any header files, and
include it in source files iff the source file actually uses cfile. Add
whatever includes that requires.
Change-Id: I9f1ee391f951dc427ff62c80f67aa4877a37c229
Reviewed-on: https://code.wireshark.org/review/24733
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make sure each ui/*.[ch] file uses identical (4-space) indentation.
Remove ui/.editorconfig. Fix up other formatting where needed.
SPDX-abbreviate the license blurb in the files we modify.
Change-Id: I5faa1c1eae9a4b6220422ad8e4ba7a341c7deb1f
Reviewed-on: https://code.wireshark.org/review/24632
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Set STAT_FLAG_WRONG_TIMESTAMP for RTP sequence when newer packet has lower timestamp than previous one.
Change-Id: Ib18830eea33ddb3dbbdf3beba279131c0fc5a948
Reviewed-on: https://code.wireshark.org/review/19292
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
- spaghetti code for save was split into separate functions
- code saves G.711 only, all other codecs are saved as silence with correct duration
- code is ready to include other codecs
- code supports 8000 Hz sampling rate only, other rates are rejected with warning
- bidirectional stream (forward and reverse) creates stereo .au file
- output is based on timestamps in RTP streams
- save operation is slower than before because it is set of seek() - one per each codec sample
- code allows align of save audio:
- as it is - each stream is saved from its beginning, no aling
- to start of each other - later stream is prepended with silence
- align saved audio to beginning of capture file - each stream is prepended with silence
- save to raw works correctly now - only payload is saved
- old code was inserting G.711 silence time to time to raw data
Bug: 13242
Change-Id: I74d02a1cc1c75acf9ffe930d078c00a0555cbfb6
Reviewed-on: https://code.wireshark.org/review/19245
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Dialog shows time (relative to capture start) and packet number when forward and reverse stream starts. It shows difference in such values on bottom of dialog too.
Bug: 13239
Change-Id: If807b8a56723df17ed131b1aac053cf8f985bb7b
Reviewed-on: https://code.wireshark.org/review/19239
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It's not tied to the frame_data structure any more, so it belongs by
itself.
Clean up some #includes while we're at it; in particular, frame_data.h
doesn't use anything related to tvbuffs, so don't have it gratuitiously
include tvbuff.h.
Change-Id: Ic32922d4a3840bac47007c5d4c546b8842245e0c
Reviewed-on: https://code.wireshark.org/review/13518
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That removes most of the uses of the frame number field in the
frame_data structure.
Change-Id: Ie22e4533e87f8360d7c0a61ca6ffb796cc233f22
Reviewed-on: https://code.wireshark.org/review/13509
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Don't return allocated memory as a const pointer.
Fixes multiple [-Wcast-qual] warnings.
Change-Id: Ie9ceac27fa2a5eba41a5392ac983ff28c3939239
Reviewed-on: https://code.wireshark.org/review/12267
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Replace CMP_ADDRESS, COPY_ADDRESS, et al with their lower-case
equivalents in the ui directory.
Change-Id: I10e95e66c8da5b880133452ebc484c53046e87ba
Reviewed-on: https://code.wireshark.org/review/11199
Reviewed-by: Michael Mann <mmann78@netscape.net>
The data that describes RTP streams become invalid when packets are
re-dissected. This results in a crash in GTK when the "RTP Analyse"
option is used and and a crash in Qt when the display filter is changed
while the RTP Streams dialog is open.
Fix this by adding a tap_reset callback (modelled after mcaststream) to
the RTP tap listener that allows the GTK+ and Qt dialogs to clear the
displayed list of RTP streams.
Bug: 10016
Change-Id: I7478678db63d7ac8110c44c163844e9f66fad9e9
Reviewed-on: https://code.wireshark.org/review/10728
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Rename ui/gtk/iax2_analysis.h to ui/tap-iax2-analysis.h. Move
iax2_packet_analyse to ui/tap-iax2-analysis.c.
Rename rtp_analysis.h to tap-rtp-analysis.h to match IAX2.
Change-Id: Ice7e9ad0d7bf62d631850089c880ec09a3e101dd
Reviewed-on: https://code.wireshark.org/review/10375
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the UDP multicast stream dialog. Abuse TapParameterDialog a bit more
so that we can edit parameters.
Remove some unused struct members and an unused function.
Change-Id: I962c70344e792f0959527e4bcba8a20bd7e8acf9
Reviewed-on: https://code.wireshark.org/review/10084
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Combine the GTK+ RTP Stream Analysis and RTP Graph Analysis dialogs into
one. Yell at the user less. Disable the Analyze RTP Stream menu item if
we don't have an RTP stream selected.
There are a *lot* of moving parts in this dialog. I've tested with the
few RTP captures I have but it's by no means complete.
"To do" items are listed at the top of rtp_analysis.cpp.
Change-Id: Id503977f069bebc46cc68bc749f0c9cbf4d37bf6
Reviewed-on: https://code.wireshark.org/review/9650
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Merge rtp_sample_header_t into rtp_sample_t. That's the only place it
was used. Note that rtp_sample_t is used for writing rtpdump files.
Move the rtp_sample_t definition to tap-rtp-common.c. Rename it to
rtpdump_info_t. Make rtp_write_sample static.
Change-Id: I04e7428f634efa87a98e5d6c82a354f94ab1765d
Reviewed-on: https://code.wireshark.org/review/9629
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add keyboard shortcuts. Note that not all of the buttons made it from
GTK+. Add a "Go to setup frame" option.
Move rtp_streams.c from ui/gtk to ui.
Add a help URL for RTP analysis (which needs to be split into streams +
analysis).
Fix RTP stream packet marking.
Change-Id: Ifb8192ff701a933422509233d76461a46e459f4f
Reviewed-on: https://code.wireshark.org/review/6852
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Almost all instances require using "manual" memory management, but it gets some ep_ calls out of the GUI.
Change-Id: Ifa7303766b08d09442ccf3d7063cbe061578ecd9
Reviewed-on: https://code.wireshark.org/review/6318
Reviewed-by: Michael Mann <mmann78@netscape.net>
Consolidate the three different RTP stream structs in ui/rtp_stream.h,
ui/gtk/rtp_player.c, and ui/voip_calls.c into one. Make the member names
a bit more consistent. Document what each GList contains. Use nstime_t
for timestamps since that's what we get from the frame data. Use g_new0
to initialize our structs.
Change-Id: I2b3f8f2051394a6a98a5c7bc49c117f07161d031
Reviewed-on: https://code.wireshark.org/review/5843
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
"get_addr_name()" -> "ep_address_to_display()", to 1) indicate that it
returns a string with ephemeral scope and 2) indicate that it maps an
address to a "displayable" form - a name if possible, an address string
if not.
"se_get_addr_name()" -> "get_addr_name()", to indicate that its strings
have the same scope as "get_ether_name()", "get_hostname()", and
"get_hostname6()".
Change-Id: If2ab776395c7a4a163fef031d92b7757b5d23838
Reviewed-on: https://code.wireshark.org/review/1216
Reviewed-by: Guy Harris <guy@alum.mit.edu>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
I'm not sold on the name or module the proto_data functions live in, but I believe the function arguments are solid and gives us the most flexibility for the future. And search/replace of a function name is easy enough to do.
The big driving force for getting this in sooner rather than later is the saved memory on ethernet packets (and IP packets soon), that used to have file_scope() proto data when all it needed was packet_scope() data (technically packet_info->pool scoped), strictly for Decode As.
All dissectors that use p_add_proto_data() only for Decode As functionality have been converted to using packet_scope(). All other dissectors were converted to using file_scope() which was the original scope for "proto" data.
svn path=/trunk/; revision=53520