Instead of subclassing QTextEdit and filling it with the entire contents
of our tvbuff, subclass QAbstractScrollArea and draw text by hand only
when needed. The new code should be *much* faster.
Some code based on QHexView by Even Teran
(https://code.google.com/p/qhexview/).
To do:
- Finish the bit view implementation.
Change-Id: Ie44de6870d80711cd44324521a17ab76bcefe5e5
Reviewed-on: https://code.wireshark.org/review/4922
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Include new Couchbase Server 3.0 DCP support
Change-Id: I38d0edd7d135a92c130a60dab650aef0ab1205be
Reviewed-on: https://code.wireshark.org/review/2956
Reviewed-by: Michael Mann <mmann78@netscape.net>
Previoulsy added "adb_cs" is only for adb client <-> adb daemon communication
by loopback interface (by TCP). But there is also communication between
adb daemon and device (by TCP or USB). This transport protocol is different, but
now support is done.
ADB services are shared between ADB and ADB_CS so put them into "adb_service"
dissector. There is still some services to be added.
Change-Id: I754331d3dc6ccf3c17445f5563d01cf2fe1489c7
Reviewed-on: https://code.wireshark.org/review/4651
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
This was reported by Emre Baris.
Change-Id: Ia37527e2a612fcbabd3ce7c6d8faf33905bbe52d
Reviewed-on: https://code.wireshark.org/review/4701
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Bug: 10534
Change-Id: Id56008da0c21a5f3a0309cdf21aff287c7820dcf
Reviewed-on: https://code.wireshark.org/review/4372
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug: 8673
Change-Id: I4e8270c76291d6ea0e0187f00a342804275f2c11
Reviewed-on: https://code.wireshark.org/review/4547
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
draft-kouvelas-lisp-rloc-membership-00 specifies 9 new LISP control
message types using TCP transport instead of UDP (which is used by all
existing messages). These new messages are related to each other and
are used to exchange RLOC membership information between a tunnel router
and a map server.
Bug: 10494
Change-Id: I129f0d6344693092bd5d0efb06b025e89fd26bf2
Signed-off-by: Lorand Jakab <ljakab@ac.upc.edu>
Reviewed-on: https://code.wireshark.org/review/4253
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The Bug Fixes section is empty, which creates an empty Docbook section,
which isn't allowed. Comment out its header for now.
AsciiDoc interprets single quoted text as emphasized, which probably
isn't what was intended. Use curly quote markup instead.
Add a link to the AsciiDoc cheat sheet.
Change-Id: Ib9746ea714f90a28a2f1204e97e9e185aaef3df6
Reviewed-on: https://code.wireshark.org/review/4429
Reviewed-by: Gerald Combs <gerald@wireshark.org>
- Don't list bugs which were fixed in 1.12 as being fixed in 1.99. (We probably
should add some bugs to the bugs-fixed list.)
- Remove new-features list for everything prior to 1.12 (so we only list
improvements since 1.12).
- Fix bug link to bug 1814.
- Fix the wiki's URL (the wiki doesn't appear to support https today).
- Remove bugs 4445 and 9242 from the Known Problems list: they've been fixed.
Change-Id: Ideb9ddf24e429ee00c19ac975370aa4fe81e652b
Reviewed-on: https://code.wireshark.org/review/4403
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
As Pascal discovered in
https://www.wireshark.org/lists/wireshark-dev/201409/msg00045.html
Wireshark-gtk.exe crashes at startup on Windows 8.1 x64 when compiled
with the GTK+ 2.24.23-1.1 bundle and Visual C++ 2013. Revert to the
Win64 build to the prior GTK+ bundle, which works on my test system.
Update the release notes. Make sure we use a libintl-8.dll that's
compatible with GnuTLS.
Ideally we'd just upgrade or rebuild the GTK+ bundle but so far that
hasn't worked. Prior to this I tried:
Updating the gtk2 package at build.opensuse.org to 2.24.24. This fails with
[ 187s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/gtk+-2.24.24/gtk'
[ 187s] /usr/bin/gtk-update-icon-cache --force --ignore-theme-index \
[ 187s] --include-image-data \
[ 187s] --source builtin_icons stock-icons > gtkbuiltincache.h.tmp && \
[ 187s] mv gtkbuiltincache.h.tmp gtkbuiltincache.h
[ 187s] gtk-update-icon-cache: No theme index file.
[ 187s] make[2]: *** [gtkbuiltincache.h] Error 1
Switching to the OBS GTK+ 3.14 package. It looks like a lot of our GTK+ code is
deprecated, including GtkAction and GtkAttachOptions.
Change-Id: I1548c84022f02895e5d424cd61e0fed7b57b2e75
Ping-Bug: 9914
Reviewed-on: https://code.wireshark.org/review/4379
Reviewed-by: Gerald Combs <gerald@wireshark.org>
author to AUTHORS.
Also mention support of nanosecond timestamps in PCAP-NG files.
Change-Id: I31666de845240a311a8332cff42120d78d2d1474
Reviewed-on: https://code.wireshark.org/review/4367
Reviewed-by: Evan Huus <eapache@gmail.com>
documents referring to the split out sections.
Remove trailing whitespace while at this.
Change-Id: I36cfe0ac55e8f653bffbf850e01f582aacf85557
Reviewed-on: https://code.wireshark.org/review/4094
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Also add the S7 Communication dissector's author to AUTHORS.
Mention that the Qt UI is now the default.
Change-Id: Ie2629333fd48bbe1ce95052292336a4f8608ea17
Reviewed-on: https://code.wireshark.org/review/3988
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
All credit for development should go Qiaoyin Yang
CP2179 protocol is a serial based protocol. The 2179 protocol is implemented with minor variations between vendors.
The RTAC implemented the 2179 client supporting a limited function codes and command codes. The RTAC doesn't support
multiple function codes in a single request and the dissector also doesn't support decoding these or corresponding responses.
Bug:10285
Change-Id: I217bf4185c52b0b183f69b3b5aa84613340d3944
Reviewed-on: https://code.wireshark.org/review/3089
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Our Windows portable packaging environment has a lot of cruft which is
no longer relevant. We removed support for U3 packages and the method
we use to generate PortableApps packages has been deprecated for a while.
Create PortableApps packages using current file formats (AppInfo v3.0)
and tools. Generate the PA launcher using the PortableApps.com Launcher
generator. Copy files and directories from the top level instead of using
a manifest derived from the NSIS installer.
The manifest is a good idea, but we should create a central manifest
and use that to generate the NSIS and PortableApps packages instead of
trying to parse wireshark.nsi.
The new package still needs a bit of work but it installs and runs in
the current version of the PA Platform.
Remove the define for MAKENSIS_UNICODE. It doesn't look like we were
using it.
Start tearing down makefiles and scripts that we no longer use.
Ping-Bug: 4191
Change-Id: Ib7173eec887d0abf69bb176a1e3f943a5a63bee4
Reviewed-on: https://code.wireshark.org/review/3962
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: Ia6e3f8c567159fc2cf19a8d427a29c5c6dcdf038
Reviewed-on: https://code.wireshark.org/review/3942
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Leave most of the content intact for now.
Change-Id: I21aad681194d1bb1841e29f4ac41be4677fcb909
Reviewed-on: https://code.wireshark.org/review/3939
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Leave most of the content intact for now.
Change-Id: Ie91fda8a3fe6ea2eb4c47acf7c41d7e6979235b0
Reviewed-on: https://code.wireshark.org/review/3938
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Leave most of the content intact for now.
Change-Id: Ic264814aa8e442df100ae8533098843ef6a2e6c9
Reviewed-on: https://code.wireshark.org/review/3937
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Leave most of the content intact for now. Remove images for
no-longer-supported versions of GTK+. Add an example for building the
Guides to README.cmake.
Change-Id: Id9e6a308c91b594d1fb7f107d7b9b28074a92a8b
Reviewed-on: https://code.wireshark.org/review/3931
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Fix broken download URLs in the introduction. Update some macros to use
https:// URLs.
Change-Id: I145e74e14ec04ce5fcf94a65cd5623059875c6e1
Reviewed-on: https://code.wireshark.org/review/3932
Reviewed-by: Gerald Combs <gerald@wireshark.org>
capture chapter from xml to asciidoc either.
Change-Id: Ia48d4e0e4b445aedabd29a8483bcc19f12c13b20
Reviewed-on: https://code.wireshark.org/review/3857
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
into an xml file.
Change-Id: I43ae59d14cbdcf460250cf62005aea4a2772d11f
Reviewed-on: https://code.wireshark.org/review/3846
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
because of different timezones.
Change-Id: I93809447db29c2cc5f848edb438ee16372b57453
Reviewed-on: https://code.wireshark.org/review/3824
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Leave most of the content intact for now. Add a section on markup
conventions to README.txt. Remove the .mediaobject border.
Change-Id: I06cfd482a4c8ea63c90b9f59fcdf2afaf636a4a2
Reviewed-on: https://code.wireshark.org/review/3821
Reviewed-by: Gerald Combs <gerald@wireshark.org>
In config.nmake search for multiple versions of fop in a couple of places, preferring fop 1.1
In Makefile.nmake remove any PYTHONPATH env var (as that's probably for Windows)
and not the Cygwin python used in asciidoc
In Readme.txt update some Cygwin package info
Change-Id: I117ec6bbdabc34829b421fd514508383b925090f
Reviewed-on: https://code.wireshark.org/review/3816
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Fix --asciidoc-opts in Makefile.am.
Add borders around menu and keycap markup. I like the latter but the
former could probably use more work.
Change-Id: If02e3d00875106d6b8f8bcf01cd52b1df4f9b6c8
Reviewed-on: https://code.wireshark.org/review/3817
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a custom stylesheet that inserts
<meta http-equiv="X-UA-Compatible" content="IE=9" >
at the top of our HTML Help output. This *should* convince the
WebBrowser control to draw our new SVG images.
Change-Id: Iae491128195d3738951f3d19e2f82dd3fc73d1d8
Reviewed-on: https://code.wireshark.org/review/3814
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Use a common set of SVG files for AsciiDoc / DocBook admonition
graphics. Put them in a common directory. According to
http://caniuse.com/svg all common browsers have had SVG support for
a while now.
The graphics themselves were created with Inkscape. If you would like
to refine them further you are more than welcome.
Use variables to assemble xsltproc commands in Autotools and Nmake
while we're here.
Try to update Debian rules to reflect ga92c3fb.
Change-Id: If82647af27a60117c517125dff0aca81c033be72
Reviewed-on: https://code.wireshark.org/review/3206
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Fix a quotation warning. Use the menu:[] and button:[] macros. Other
minor changes. Clean up whitespace.
Change-Id: I3ae98ddcbd90c8d22284a9ef467268dabee8f829
Reviewed-on: https://code.wireshark.org/review/3806
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Create graphics directories and copy files into them similar
to Autotools and Nmake. Adjust some xsltproc arguments. Fix the
--asciidoc-opts flag.
Note: Admon graphics are broken pending change 3206.
Change-Id: I94d498de36150a7cb4ffd080581523300b222bd4
Reviewed-on: https://code.wireshark.org/review/3805
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The "quotes" section of the Asciidoctor compatibility file appears to
be incompatible with Cygwin's version of AsciiDoc (8.6.3).
Change-Id: Ifd08095effa07bc7277a2fff9de322dda51a8d47
Reviewed-on: https://code.wireshark.org/review/3804
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the "asciidoc.conf" compatibility configuration file from
Asciidoctor. Although we don't use Asciidoctor it gives us macros that
keep us from losing some useful DocBook elements. Update various CMake
files to support multiple AsciiDoc configuration files.
Leave most of the content intact for now. Hopefully the other chapters
aren't as laden with markup.
Change-Id: Id69757342b86abb2b3130cb61e90f5695a26ea8a
Reviewed-on: https://code.wireshark.org/review/3680
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Fix a typo in the generation of top_srcdir NEWS.
Change-Id: I20a140a68b9afca5096d33d99a3ea5d24e776f05
Reviewed-on: https://code.wireshark.org/review/3626
Tested-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Convert textify.sh to PowerShell. Use PowerShell's built-in line ending
conversion so that we don't depend on unix2dos.
Only copy the help toc and text files to the staging directory.
Add PowerShell to the Developer's Guide. Fixup some other content.
(asn1/Makefile.inc.nmake contains a call to u2d. Hopefully that's not
a problem.)
Change-Id: I61a92aa54820d01015abb9ffa65815558ae31c71
Reviewed-on: https://code.wireshark.org/review/3487
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Copy the built file into the source directory (since it's generated but checked
in). Don't fail to build, though, if we can't do that copy.
Change-Id: Ia94a19b6f813ee78b191cd09d51198462f95b223
Reviewed-on: https://code.wireshark.org/review/3425
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
This is the first version of a Ceph dissector. It is not complete but
is far enough along to be helpful to many people working with Ceph.
Currently the dissector can fully dissect the Ceph protocol and has
support for full dissection of most common messages. For the other
messages for which full dissection is not available their metadata is
parsed and shown along with the raw data of the different message
sections.
Change-Id: Ic7917a3d01148c6fe2f9ea2c13ecd09ecc06c2d7
Reviewed-on: https://code.wireshark.org/review/1889
Reviewed-by: Bill Meier <wmeier@newsguy.com>
Jeff Morriss