Run 2to3. Convert our payload to bytes. Switch from tab to 4-space
indentation as described in PEP8, which fixes a "TabError" message.
Change-Id: Ic20b6bc1fc1a945758c8be1bb54435f3326fb605
Reviewed-on: https://code.wireshark.org/review/26744
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Replace the GPLv2+ blurbs in the doc and docbook directories with SPDX
headers as appropriate. This includes example code such as
packet-PROTOABBREV.c.
Remove dfilter2pod.pl and dfilter2xml.pl. We haven't used them since
2010.
Change-Id: I4adec02a9a4bc3e71e32bdf89f2754edaf696938
Reviewed-on: https://code.wireshark.org/review/24343
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for extcap control pipes on Windows.
Improved read loop in InterfaceToolbarReader.
Delay opening control pipes until extcap has opened the fifo pipe.
Make extcap_example.py work on Windows.
Bug: 13833
Change-Id: I4b47d25452637759b8a3be53be48eee5365bc0e4
Reviewed-on: https://code.wireshark.org/review/23211
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
- Select one of the capturing interfaces when start capture
- Only send user changed control values when start capture
- Don't show hidden interfaces
- Allow a toolbar with no interfaces
- Renamed button role "reset" to "restore"
- Improved control number validation
- Updated documentation
Change-Id: Icc8d04043c95c1f3ef8d7cdc3b251be4471cba0a
Reviewed-on: https://code.wireshark.org/review/21445
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
An extcap utility can provide configuration for controls to use in a
GUI interface toolbar. This controls are bidirectional and can be
used to control the extcap utility while capturing.
This is useful in scenarios where configuration can be done based on
findings in the capture process, setting temporary values or give other
inputs without restarting current capture.
Todo:
- Add support for Windows
Change-Id: Ie15fa67f92eb27d8b73df6bb36f66b9a7d81932d
Reviewed-on: https://code.wireshark.org/review/19982
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
get enabled if the user had selected a file (and mustexist=true wasn't specified).
This commit also contains minor fixes to doc/README.extcap, it's now more aligned to the
actual implementation.
Added example usage of fileselect, radio and multiselect to doc/extcap_example.py.
Change-Id: Ibfe40a35a26f49322fbe64c0594506a2163f7e20
Reviewed-on: https://code.wireshark.org/review/20274
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Added a parameter to set placeholder text in textBox.
Change-Id: Iccf92fe60abc78be8f0fa112c0c9eb78890674b5
Reviewed-on: https://code.wireshark.org/review/12463
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
I guess that when SIGINT is intercepted, then the writes are restarted
and the doExit condition is never checked. Remove this racy check in
favor of catching the KeyboardInterrupt exception.
Test: tshark -i example1; kill tshark; check process list for python.
Bug: 11657
Change-Id: Ia8b1ee560b9dcd31dd91df27fbfb8e91237581c9
Reviewed-on: https://code.wireshark.org/review/18218
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Fixes trivial syntax error in try/except, ensure that the message are
bytes instead of a string and remove unnecessary use of an append_bytes
function.
Did not try to fix the other Python issues, at least it runs now.
Change-Id: Ib24f6116bc9d3cf177bc940da9f89aff90695a93
Reviewed-on: https://code.wireshark.org/review/18212
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Allow the tool to provide a link to a helppage, displayed
by clicking on help in the configuration dialog.
The URL will be opened using an URL based service, therefore local
as well as remote URLs are possible.
Change-Id: I58b30244e97919d5cf6892faf96536ddc30fb5a7
Reviewed-on: https://code.wireshark.org/review/17549
Reviewed-by: Roland Knall <rknall@gmail.com>
This patch reads out the stderr messages from an extcap
utility and displays it to an user. It was tested on Qt
but not on GTK, but should work their as well.
On Mac OS/X and Windows the child_watch does not behave
as it was intended. Therefore in extcap_cleanup, the callbacks
are called manually, if and only if, they have not been
called already.
The reason why it displays two error messages is, that
by the time the first one is being displayed, glib has not
returned from the spawned process on Linux yet. So there
is no way to add the stderr correctly, and putting a handler
to stderr into interface_opts will lead to memory errors,
cause then the code tries to access memory outside of its
protection.
Bug: 11892
Change-Id: I2db60dd480fed3e01428b91a705057e4f088bd15
Reviewed-on: https://code.wireshark.org/review/12954
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This patch creates the functionality of saving all parameters
for extcap devices in the general preference section.
For now, multiselect and fileselect do not save their values
but patches for this will be provided in the future
Also, all preferences are stored as strings to make handling
easier. This might change in the future, but for the first version
it will stick.
Restore to Defaults is not implemented as of yet, and will be
in a future version, once the preference storing is finalized
Bug: 11666
Change-Id: I178346405146d2e43f4f3481c05c92c0b3595af5
Reviewed-on: https://code.wireshark.org/review/13451
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Cleanup handling of complex data types and use only
glib defined datatypes while handling argument values.
Add a save parameter, which (additionally) can set, that
a parameter is not saved in a configuration file. Passwords
are by default not saved, which may be overwritten using
this parameter
Change-Id: I67eff0f3286170f082d532e806a39511c40df647
Reviewed-on: https://code.wireshark.org/review/13573
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
Adds the list of available extcaps to the plugin list in the
About dialog of Wireshark (Qt only). To do this, and additional
sentence is provided in the extcap arguments list, which allows
for additional information to be passed (as of right now, just
version and display is used)
Additionally, cleans up the code when using g_free.
Bug: 11683
Change-Id: I04a958e2b73c9a707ab1cb4f2fc8345833a854a9
Reviewed-on: https://code.wireshark.org/review/13224
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Regular expressions follow the Qt Regex syntax, which is
formulated after the Perl Regex syntax. A more detailed
overview of the possible rules can be found at:
http://doc.qt.io/qt-4.8/qregexp.html
If a required option is present, even the double-click on
the interface will first start the options dialog (Qt only)
Required fields are marked bold and put first in the dialog.
Additionally if validation failes (which it will if a required
field is kept empty, but also if a non-required textfield is
violating the defined regex), the label of the field is marked
with red.
Change-Id: If04a1146d0dfa778332ab2a39122c7a6ee1e93d2
Reviewed-on: https://code.wireshark.org/review/12914
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Added the option --extcap-capture-filter to extcap to send the capture filter
from the main screen to the extcap binary.
Change-Id: I75f0d7dbec810551225377f9221053298488cdd5
Reviewed-on: https://code.wireshark.org/review/11423
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
- If boolflags are being used, an extra space is added
to the call of the extcap filter. This leads to the
argumentparser of python to exit with an error-code,
and the extcap filter will not start. This patch instead
catches the unknown arguments and prints them on stdout,
as well as running the dissection with the rest of the
arguments list.
Basically this is a work-around, for a behaviour not
yet fixed in extcap, but it stabilizes the usage of the demo
Change-Id: I7589292692b0b3c839909fd09d62a4714cbe869e
Reviewed-on: https://code.wireshark.org/review/4638
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Tomasz Moń <desowin@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
There is regular expression that extracts only the number from
--extcap-interface argument and only that number (as string) is being
passed to extcap_dlts().
Change-Id: I5159f9405a766c1edff792213b2aef72b9a29ba4
Reviewed-on: https://code.wireshark.org/review/4550
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
(This change needs to be approved Roland Knall--by the file's author--in
Gerrit.)
Change-Id: I58285cb1d773a57fe7d087799bf6d2ffbd962364
Reviewed-on: https://code.wireshark.org/review/3773
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Extcap is a plugin interface, which allows for the usage
of external capture interfaces via pipes using a predefined
configuration language which results in a graphical gui.
This implementation seeks for a generic implementation,
which results in a seamless integration with the current
system, and does add all external interfaces as simple
interfaces.
Windows Note: Due to limitations with GTK and Windows,
a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe
is needed, which is part of any GTK windows installation.
The default installation directory from the build is an extcap
subdirectory underneath the run directory. The folder used by
extcap may be viewed in the folders tab of the about dialog.
The default installation directory for extcap plugins with
a pre-build or installer version of wireshark is the extcap
subdirectory underneath the main wireshark directory.
For more information see:
http://youtu.be/Nn84T506SwU
bug #9009
Also take a look in doc/extcap_example.py for a Python-example
and in extcap.pod for the arguments grammer.
Todo:
- Integrate with Qt - currently no GUI is generated, but
the interfaces are still usable
Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f
Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net>
Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net>
Signed-off-by: Roland Knall <rknall@gmail.com>
Reviewed-on: https://code.wireshark.org/review/359
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Gerald Combs