Add dumpcap support for configuring 80MHz, 80+80MHz, 160MHz monitor
modes via nl80211.
Change-Id: I2ae8955670c2a9b5051e2223d45ce522459f2c5f
Reviewed-on: https://code.wireshark.org/review/13964
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
It's an ancient obsolete option with a confusing name.
Change-Id: Ib10330cf859cdea18fed2077c6539e56350ef380
Reviewed-on: https://code.wireshark.org/review/11967
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
sshdump is an extcap module that allows dumping from a remote host using an ssh connection.
It goes with the existing extcap plugin interface.
Change-Id: I8987614fdd817b8173a50130812bc643a4833bca
Reviewed-on: https://code.wireshark.org/review/11402
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
A build with the gold linker broke with:
run/libwireshark.so.0.0.0: error: undefined reference to 'krb5_c_decrypt'
Fix this my restructuring the FindKERBEROS module to use the libraries
found by pkg-config.
While at it, check for MIT and Heimdal instead of assuming MIT. Remove
HAVE_KEYTYPE_ARCFOUR_56 as this macro is not used.
Change-Id: Iab23d79bc3f25e9c0fd7203b6f050f875fb4a2b5
Reviewed-on: https://code.wireshark.org/review/10907
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Note the "initial". This is woefully incomplete. See the "to do" lists
below and in the code.
This differs a bit from the GTK+ version in that you specify one or more
streams to be decoded.
Instead of showing waveforms in individual widgets, add them all to a
single QCustomPlot. This conserves screen real estate and lets us more
easily take advantage of the QCP API. It also looks better IMHO.
Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We
probably won't use the widgets until we make 5.0 our minimum Qt
version and plain old QtMultimedia lets us support Qt 4 more easily
(in theory at least).
Add resampling code from libspeex. I initially used this to resample
each packet to match the preferred rate of our output device, but this
resulted in poorer audio quality than expected. Leave it in and use to
create visual samples for QCP and to match rates any time the rate
changes. The latter is currently untested.
Add some debugging macros.
Note that both the RTP player and RTP analysis dialogs decode audio data
using different code.
Note that voip_calls_packet and voip_calls_init_tap appear to be dead
code.
To do:
- Add silence frames where needed.
- Implement the jitter buffer.
- Implement the playback timing controls.
- Tapping / scanning streams might be too slow.
Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4
Bug: 9007
Reviewed-on: https://code.wireshark.org/review/10458
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Changed path from "share" to one based on plugns path
For example /usr/local/lib/wireshark/extcap
Change-Id: I8f4a9f274b1cec897ed45de9e05679ac3f230301
Reviewed-on: https://code.wireshark.org/review/8161
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Tested-by: Balint Reczey <balint@balintreczey.hu>
androiddump is extcap program that can be used with Android devices
(need Android SDK in system PATH). Supported is Logcat/Logger logs and
Bluetooth interfaces for all Android to this day (Lollipop).
Please note that it will work also for FirefoxOS.
Interfaces:
1. Logcat Main (binary or text)
2. Logcat System (binary or text)
3. Logcat Events (binary or text)
4. Logcat Radio (binary or text)
5. Logcat Crash (text; Lollipop)
6. Bluetooth Hcidump (<Kitkat)
7. Bluetooth Bluedroid External Parser (Kitkat)
8. Bluetooth BtsnoopNet (Lollipop)
Change-Id: I26e4cd1a37a6af805f8b932399b4aa44ee7b5a80
Reviewed-on: https://code.wireshark.org/review/7475
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Unlike autoconf, which can generate config.h.in based on the contents of
the configure script, CMake requires that cmakeconfig.h.in be updated
separately.
Change-Id: I78ead3bae41667bd7c452329485a819ac34bce5e
Reviewed-on: https://code.wireshark.org/review/7859
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It can be set if either 1) this is Windows (where we're assumed to be
using WinPcap, which includes calls to set the buffer size) or 2) we
have pcap_create() (in which case we also have pcap_set_buffer_size(),
at least in a normal libpcap release).
Use that rather than testing "defined(_WIN32) ||
defined(HAVE_PCAP_CREATE)"; that makes it a bit more obvious what's
being tested.
Change-Id: Id9f8455019d19206b04dd6820a748cb97ae5ad12
Reviewed-on: https://code.wireshark.org/review/7816
Reviewed-by: Guy Harris <guy@alum.mit.edu>
configure if we can't find any name resolver (autotools only).
This puts back the gethostbyname()/gethostbyname2() code removed in
I3348179626e97daaddfbc89e3ed21e39915e3de4 and
If59ce8a038776eadd6cd1794ed0e2dad8bf8a22c but as a last-resort option (only
if we don't have a better or more modern name resolver).
As suggested/requested by Guy in https://code.wireshark.org/review/#/c/7423/
Change-Id: I706dbbd65135f47c67d3d8d88a61ad7273914c47
Reviewed-on: https://code.wireshark.org/review/7447
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Add a "flavor" (for lack of a better word) banner, which can be set at
build time via WIRESHARK_VERSION_FLAVOR / VERSION_FLAVOR. Set it to
"Development Build" by default. This effectively migrates the
"DEVELOPMENT VERSION" logo image text from the GTK+ UI.
Add full release and automatic update information at the bottom.
Remove the short version from the welcome banner (top left).
To do:
- Add back support for gui_version_placement.
- Move the version and repository branch to the flavor label?
- Add update links as appropriate to the bottom.
- Clean up layout and spacing.
Change-Id: I28af33e6c2beb855f803a2dfedef49f3e8389057
Reviewed-on: https://code.wireshark.org/review/7071
Reviewed-by: Gerald Combs <gerald@wireshark.org>
1988 called, they want their lack of a C standard back. We don't need
to check whether we have stdarg.h, stddef.h, stdlib.h, or string.h, as
they're specified by C89 and I don't think there are any platforms we
care about that don't have a C89 environment in which we could be built.
Change-Id: I447551181284fab7722354b62774625ed8ee94bc
Reviewed-on: https://code.wireshark.org/review/7110
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
They've been deprecated for a very long time. Replace them with
getaddrinfo. Note that we might not want to do synchronous name
resolution at all.
Add HAVE_GETADDRINFO to the KfW win-mac.h collision list.
Change-Id: If59ce8a038776eadd6cd1794ed0e2dad8bf8a22c
Reviewed-on: https://code.wireshark.org/review/6958
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
CMake now generates local copies of .rc files for all the Windows
components and uses the files in the build of the components.
The .rc.in files that include an icon were modified to allow the icon
path to be set by CMake. The path is removed for nmake builds.
Updated build architecture detection, required for wireshark.manifest.in
Change-Id: I7b1ff43050e9b0efb861d1041636fb4aef49a4f8
Reviewed-on: https://code.wireshark.org/review/6482
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
We do that with the autotools; do it with CMake as well.
We could, in theory, handle thosands-grouping ourselves, on all
platforms supporting ANSI C (for which read "all platforms we care
about") by using localeconv()'s thousands_sep and grouping items, but
that's a bit more work.
Fix autotools' comment for that item while we're at it (it checks the
GLib printf routines, not the system printf routines).
Change-Id: I000f0f3b955d9b192ade15e3fabc46d6b48a052e
Reviewed-on: https://code.wireshark.org/review/6317
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Just as we check for it in autotools, check for it in CMake.
Change-Id: I342a3fcde6a5f8190dac67260f25c070b6f5430f
Reviewed-on: https://code.wireshark.org/review/6314
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We wire it on, so we don't need a commented out wiring-it-on on Windows.
Explain *why* we're wiring it on rather than doing checks for IPv6
support.
Change-Id: I205ba2456160f9dad48041f27c63a09cdcdc12d3
Reviewed-on: https://code.wireshark.org/review/6313
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We don't check it (we don't support Python as an extension language -
the experimental support was dropped).
Change-Id: Iedbe1dc5095614676c7eb3026d02f421bdba0d1d
Reviewed-on: https://code.wireshark.org/review/6312
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We support three types of platforms:
1) UN*Xes that have both getopt() and getopt_long();
2) UN*Xes that have getopt() but not getopt_long();
3) Windows, which has neither.
Checking for getopt_long() lets us distinguish between 1) and 2) and
build getopt_long() for them.
Change-Id: Iaf0f142f9bebaa2eed2128d544ec9786711def45
Reviewed-on: https://code.wireshark.org/review/6045
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also, we don't use NEED_STRPTIME_H, we use HAVE_STRPTIME.
Change-Id: I330e8ce408c05b74c50f3369691283e35e68505c
Reviewed-on: https://code.wireshark.org/review/5910
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add Telephony menu items for VoIP Calls and SIP Flows. Put VoIP Calls at
the top, since that seems to be the primary item.
Add configure-time checks for QtMultimediaWidgets in anticipation of
adding a VoIP playback dialog.
Add an icon for the playback button. (Yes, I've been avoiding
GNOME-level gratuitous icons so far but this is one of the rare
occiasions where it makes sense.)
Add a help link define for the VoIP calls dialog.
Change-Id: I5d0799685c598ad9af76fe9667f8ea7d14b66050
Reviewed-on: https://code.wireshark.org/review/5674
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
CFPropertyListCreateFromStream() has been deprecated in Yosemite, in favor of CFPropertyListCreateWithStream(). The autotools
build checks for the existence of the new function, but the cmake build does not. So, add a check for it to CMakeLists.txt, and
update cmakeconfig.h.in to provide the "template" for HAVE_CFPROPERTYLISTCREATEWITHSTREAM.
Change-Id: I1a4e3e1ce83092ecf7725527b921eeca80b18d4b
Note: CFPropertyListCreateWithStream() works under Mavericks as well.
Reviewed-on: https://code.wireshark.org/review/5226
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Stig Bjørlykke <stig@bjorlykke.org>
Just as we do with autotools and nmake, define it in config.h, so it's
defined the same for every single file, rather than defining it in one
particular directory's Makefiles, so that it's defined for some code but
not all.
Change-Id: Ic41cd10f2b502e0be76c134cbeaad94dff7623f8
Reviewed-on: https://code.wireshark.org/review/4891
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If we have pcap_set_tstamp_precision(), use it to request nanosecond
time stamp resolution *if* we're writing a pcap-ng file; any code that
reads those files and can't handle nanosecond time stamp resolution is
broken and needs to be fixed.
If we're writing a pcap file, don't ask for nanosecond resolution time
stamps, as that requires a different magic number for pcap files, and
not all code that reads pcap files can handle that. (Unlike pcap-ng,
where the ability to have non-microsecond time stamp resolution was
present from Day One, it's a relatively recent addition to pcap.) We
could add a command-line option/GUI option for that, like the option
recent versions of tcpdump have, if it matters.
Change-Id: I8fa464eb929feecb9a70be70712502c9f0cc5270
Reviewed-on: https://code.wireshark.org/review/4355
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: If55498167d5e357258841f2194962749c0dfc81e
Reviewed-on: https://code.wireshark.org/review/3787
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Extcap is a plugin interface, which allows for the usage
of external capture interfaces via pipes using a predefined
configuration language which results in a graphical gui.
This implementation seeks for a generic implementation,
which results in a seamless integration with the current
system, and does add all external interfaces as simple
interfaces.
Windows Note: Due to limitations with GTK and Windows,
a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe
is needed, which is part of any GTK windows installation.
The default installation directory from the build is an extcap
subdirectory underneath the run directory. The folder used by
extcap may be viewed in the folders tab of the about dialog.
The default installation directory for extcap plugins with
a pre-build or installer version of wireshark is the extcap
subdirectory underneath the main wireshark directory.
For more information see:
http://youtu.be/Nn84T506SwU
bug #9009
Also take a look in doc/extcap_example.py for a Python-example
and in extcap.pod for the arguments grammer.
Todo:
- Integrate with Qt - currently no GUI is generated, but
the interfaces are still usable
Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f
Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net>
Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net>
Signed-off-by: Roland Knall <rknall@gmail.com>
Reviewed-on: https://code.wireshark.org/review/359
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This doesn't preclude use on < XP but does potentially allow
use of API's that don't exist on Win2K, and doing so would then
stop the exe from running on 2K.
Change-Id: I08b58bd510b832ddabbb717dd73eb7a89264048e
Reviewed-on: https://code.wireshark.org/review/2504
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Protecting HAVE_PCAP_CREATE was not enough for the moc run in qt,
maybe it doesn't have _WIN32 set? Don't even try to detect this
function on WIN32 for now.
Change-Id: I0d8a8b5b110cec164f86fe11f26a7add558eee1b
Reviewed-on: https://code.wireshark.org/review/2370
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Show the addresses as a tooltip in capture interfaces.
Change-Id: I911784e09ed9479229a7d6f8a7f1476e2e1e6224
Reviewed-on: https://code.wireshark.org/review/2155
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
SBC Codec can be optionally linked with Wireshark to provide
ability to playing RTP/SBC stream by RTP Player.
Change-Id: Iffbae16a741ffbfd0fb55a300064739d2c27c2e5
Reviewed-on: https://code.wireshark.org/review/223
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
check whether we have Lua or not. Get rid of the cmakedefines for those
two headers. (The autoconf script should perhaps do the check
differently.)
svn path=/trunk/; revision=52533
equivalent location in config.h.in, to simplify comparing the two files.
Add some tests from the autoconf script to CMake:
check for setresgid() and setresuid();
check for struct stat having an st_flags member.
Get rid of INTTYPES_H_DEFINES_FORMATS; we don't appear to check for it,
and we don't use it (we're using GLib's formatting functions, which have
their own way of handling 64-bit integers).
Get rid of STDC_HEADERS; it's in autoconf because autoconf was
originally developed back when you couldn't rely in ANSI C and has never
been removed, and something we're using for other purposes checks for
it, not because we explicitly test for it, but we don't test it in the
code, and CMake doesn't even check for it.
svn path=/trunk/; revision=52522
Sort the #cmakedefines in cmakeconfig.h.in to more closely match the
order in config.h.in, to make it easier to make sure CMake and autofoo
are doing the same checks. Remove some #cmakedefines that don't
correspond to check that are being done either by CMake or autofoo.
svn path=/trunk/; revision=52515
Mikael Kanstrup