Add a file parser and dissector that can handle the output of
`journalctl -o export`. From here we can add a systemd journal extcap
and possibly support for the JSON and binary formats.
Change-Id: I01576959b2c347ce7ac9aa57cdb5c119c81d61e9
Reviewed-on: https://code.wireshark.org/review/29311
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We call that dissector even for zero-length PSDUs, so the radio
information is shown. We also show the zero-length PSDU type.
We don't call the 802.11 dissector for zero-length PSDU frames.
That way, you don't have to open up the radiotap information to find out
about zero-length PSDU frames, we can support zero-length PSDU
information for other pseudo-headers and file types if they support it,
and taps using the radio information can get zero-length PSDU frame
information.
Change-Id: I7d5da4ea978d8ca4889fc76160f11e3416b4d036
Reviewed-on: https://code.wireshark.org/review/29034
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Do some renaming.
Change-Id: If8fa85370014f9618df38d97048dd1c52a4c389f
Reviewed-on: https://code.wireshark.org/review/28918
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have the Wiretap code just do a heuristic test to see if the file looks
like a RFC 7468 file and just had the entire blob of raw file data to
the caller, with an encapsulation type of WTAP_ENCAP_RFC7468.
Have a file-rfc7468.c dissector that processes the lines of the file,
displaying all of them. Have it extract the label from the
pre-encapsulation boundary line, and, after it's decoded the
base64-encoded data lines into a blob of data, try handing the tvbuff
with the blob to dissectors that have registered in the
"pem.preeb_label" dissector table with the appropriate label value, and
hand it to the raw BER dissector only if that fails.
This allows some files to have the content dissected as more than just a
raw blob of BER-encoded data.
Change-Id: I98db9f0beb86e5694fb8e886005a2df4fc96ba71
Reviewed-on: https://code.wireshark.org/review/28914
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Strip off only extensions that correspond to file types we know about;
QFileInfo::baseName() strips off *all* extensions, where "extension" is
"anything preceded by a .", so it turns foo.bar.pcap.gz into foo, not
foo.bar. We don't want that; instead, we strip off only those
extensions that correspond to file types we know how to read, so we'd
strip off .pcap.gz in foo.bar.pcap.gz, and strip off .pcap in
foo.bar.pcap, leaving foo.bar in both cases.
Change-Id: I5385921ad2f0fef815d52e9902fef15735fd9dae
Reviewed-on: https://code.wireshark.org/review/28636
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This should squelch warnings from Ida7b98af8c44a52ddac2c4ab0702db2519a0c4af.
Change-Id: I6803001981c63ddf76a735341ab2cc8dccdb8ab0
Reviewed-on: https://code.wireshark.org/review/28573
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Fix indentation, and note that the comment "description" (contents) are
RTF (as opposed to plain text).
Change-Id: I668a08c06e39a32318454d2ee73933083c5cb516
Reviewed-on: https://code.wireshark.org/review/28279
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Dissector for the VESA DisplayPort AUX channel protocol.
Bug: 14651
Change-Id: I5c0c7668bda969086d9d6e5069aad87e929f6340
Reviewed-on: https://code.wireshark.org/review/27311
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit dfd6eb5d68.
This change cannot be submitted without change I5c0c7668bda969086d9d6e5069aad87e929f6340.
Change-Id: Ieb22f4e9afa1742db861a291202a2790a4784e1b
Reviewed-on: https://code.wireshark.org/review/27387
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Wiretap support for reading the Unigraf DPA-400 DisplayPort
AUX channel monitor logfiles.
Bug: 14651
Change-Id: I8d3c50575c9806dd04b40053db45564404bad103
Reviewed-on: https://code.wireshark.org/review/27312
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's only being used as a working buffer to hold the raw options data we
read in.
Change-Id: I17b812e447f575ad92394b9f957658fc655cdf8e
Reviewed-on: https://code.wireshark.org/review/25701
Reviewed-by: Guy Harris <guy@alum.mit.edu>
No need for len, and call caplen event_filelen and move it after
event_len.
Change-Id: I8b3825d4022ee083ee52f83f7a69f22829ed9fc4
Reviewed-on: https://code.wireshark.org/review/25698
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Separate the stuff that any record could have from the stuff that only
particular record types have; put the latter into a union, and put all
that into a wtap_rec structure.
Add some record-type checks as necessary.
Change-Id: Id6b3486858f826fce4b096c59231f463e44bfaa2
Reviewed-on: https://code.wireshark.org/review/25696
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
There are events, there are reports, and there are "here's metadata that
doesn't correspond to something that happened at this point in the
capture"; IDBs and NRBs are the third type.
Change-Id: I89e4f9bf51dc1be5766e8df61c6337ed3e484577
Reviewed-on: https://code.wireshark.org/review/25587
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If we aren't built with libz, report a new "decompression not supported"
error if the file is gzipped; the problem isn't that it's a new capture
file format we don't support, it's that a *compressed* capture file, in
some format, but we don't support the *compression* format used.
This can be extended if we add support for other compression formats.
Change-Id: I19239525d4e02357e3ca7189996556839af8fce2
Reviewed-on: https://code.wireshark.org/review/25315
Reviewed-by: Guy Harris <guy@alum.mit.edu>
g995812c5f1 moved wiretap plugins registration from applications to
wiretap library init function.
As we do not want to load plugins for all users of libwiretap, let's
make it configurable.
Bug: 14314
Change-Id: Id8fdcc484e2d0d31d3ab0bd357d3a6678570f700
Reviewed-on: https://code.wireshark.org/review/25194
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
At one point, I remember a discussion resulting in the official name of
the next-generation replacement for pcap format being changed to
"pcapng", with no hyphen.
Make Wireshark reflect that.
Change-Id: Ie66fb13a0fe3a8682143106dab601952e9154e2a
Reviewed-on: https://code.wireshark.org/review/25214
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The check that the pcapng code does is "do we have a non-null
addrinfo_lists_t * and, if so, does it have a non-null ipv4_addr_list or
ipv6_addr_list"?
The check that the file-save code was using was just "do we have a
non-null addrinfo_lists_t *", so sometimes it'd think we couldn't do a
"quick save" even though we had no name resolution information to write
out to the capture file.
Make a routine that does that check, and use it in *both* places.
Change-Id: Id4720f4fe4940354320b2b7621ca5e37e45ec1f3
Reviewed-on: https://code.wireshark.org/review/25055
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Put different types of plugins (libwiretap, libwireshark) in different
subdirectories, give libwiretap and libwireshark init routines that
load the plugins, and have them scan the appropriate subdirectories
so that we don't even *try* to, for example, load libwireshark plugins
in programs that only use libwiretap.
Compiled plugins are stored in subfolders of the plugin folders, with
the subfolder name being the Wireshark minor version number (X.Y). There is
another hierarchical level for each Wireshark library (libwireshark, libwscodecs
and libwiretap).
The folder names are respectively plugins/X.Y/{epan,codecs,wiretap}.
Currently we only distribute "epan" (libwireshark) plugins.
Change-Id: I3438787a6f45820d64ba4ca91cbe3c8864708acb
Reviewed-on: https://code.wireshark.org/review/23983
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Bug: 14195
Change-Id: Ic6be8e1f8169968c48376984c0d1a1a69c67f32a
Reviewed-on: https://code.wireshark.org/review/24415
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
For a sane plugin build environment. Include config.h as the first
header in the .c file instead.
Fix by moving required compiler attribute macros to a new
"ws_attributes.h" API header.
Change-Id: I34f58a927f68c1a0e59686c14d214825149749e1
Reviewed-on: https://code.wireshark.org/review/23400
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Normally a .cap file contains a network type that when masked with 0xFFF
will convert to a pcap LINKTYPE_ value. However, Microsoft Analyzer
used 0xE080-0xE08A for their own purposes within a .cap file.
Add support for the WPFCapture formats and give a "not supported" error
message to the few left unsupported.
Bug: 10556
Change-Id: I321a75ce769fdec75bdc6b595936c25932950a97
Reviewed-on: https://code.wireshark.org/review/23386
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug: 4221
Change-Id: I59aff777c364af1a064e1e99ea9ac6692a4cedfa
Reviewed-on: https://code.wireshark.org/review/23333
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The NetMon wiretap reads the title and description comment fields from a
NetMon file and saves it in the wiretap private structure. Then when
it's time to make a frame, the comment fields are added to a NetMon
pseudoheader with a new WTAP ENCAP type, with the potential for netmon
pseudoheader to contain pseudoheader data from "base" wiretap. Then the
netmon_header dissector displays the comment fields and passes any "base"
wiretap pseudoheader data when calling the wtap_encap dissector table
that the frame dissector normally calls.
Bug: 4225
Change-Id: I8f772bc9494364c98434c78b61eb5a64012ff3b9
Reviewed-on: https://code.wireshark.org/review/23210
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Assigned a WTAP_ENCAP value (WTAP_ENCAP_NETMON_NET_NETEVENT) for the
dissection of Event Tracing records inside a NetworkMonitor file.
Ping-Bug: 6520
Ping-Bug: 6694
Change-Id: Ib100f3779095842e78f9b7741e80258aa866d818
Reviewed-on: https://code.wireshark.org/review/23278
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Use this for nordic_ble dissection.
Change-Id: I5323cbd8c244c4e3b645825c60d040e1ae8f3b81
Reviewed-on: https://code.wireshark.org/review/23219
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Support per-packet comments in ERF_TYPE_META through a new Anchor ID
extension header with per-Host unique 48-bit Anchor ID which links an
ERF_TYPE_META record with a packet record. There may be more than one
Anchor ID associated with a packet, where they are grouped by Host ID
extension header in the extension header list. Like other ERF_TYPE_META
existing comments should not be overwritten and instead a new record
generated. See erf_write_anchor_meta_update_phdr() for detailed comments
on the extension header stack required.
As Wireshark only supports one comment currently, use the one one with
the latest metadata generation time (gen_time). Do this for capture
comment too.
Write various wtap metadata in periodic per-second ERF_TYPE_META records
if non-WTAP_ENCAP_ERF or we have an updated capture comment.
Refactor erf_dump to create fake ERF header first then follow common
pseudoheadr and payload write code rather than two separate code paths.
Support an ERF_HOST_ID environment variable to define Wireshark's Host
ID when writing. Defaults to 0 for now.
ERF dissector updates to support Anchor ID extension header with basic
frame linking.
Update ERF_TYPE_META naming and descriptions to official name
(Provenance)
Core changes:
Add has_comment_changed to wtap_pkthdr, TRUE when a packet
opt_comment has unsaved changes by the user.
Add needs_reload to wtap_dumper which forces a full reload of the file
on save, otherwise wireshark gets confused by additional packets being
written.
Change-Id: I0bb04411548c7bcd2d6ed82af689fbeed104546c
Ping-Bug: 12303
Reviewed-on: https://code.wireshark.org/review/21873
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stephen Donnelly <stephen.donnelly@endace.com>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
A linktype was recently assigned to Linux vsock in libpcap commit
cfdded36ddcf5d01e1ed9f5d4db596b744a6cda5 ("added DLT_VSOCK for
http://qemu-project.org/Features/VirtioVsock").
The Wireshark vsock dissector can now be automatically applied when
wtap_encap matches the new WTAP_ENCAP_VSOCK constant.
This patch makes Wireshark dissect vsock packet captures without
manually specifying the dissector.
Change-Id: If252071499a61554f624c9ce0ce45a0ccfa88d7a
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-on: https://code.wireshark.org/review/22611
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
It needed to be done:
https://github.com/shirriff/pup-wireshark
(And, yes, there really *is* a DLT_/LINKTYPE_ for it! The original DLT_
values were ARP hardware types, and 3MB Ethernet was assigned an ARP
hardware type of 2.)
Change-Id: I60d96c28e67854adcb28c7e3579ae5dd1f07df4b
Reviewed-on: https://code.wireshark.org/review/22336
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add support for handling LoRaTap (https://github.com/eriknl/LoRaTap) DLT in
wiretap and add dissector for LoRaTap headers.
Exposes Syncword for subdissectors to dissect frame payload.
Change-Id: Ie4ba2189964376938f45eb3da93f2c3376042e85
Reviewed-on: https://code.wireshark.org/review/21915
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Either 1) it can be determined from the libwiretap encapsulation type,
in which case it's redundant information or 2) there *is* no pcap/pcapng
link-layer header type for that encapsulation type, in which case you
need to check for the attempt to determine it failing and handle that
failure appropriately.
Change-Id: Ie9557b513365c1fc8c6df74b9c8239e29aad46bc
Reviewed-on: https://code.wireshark.org/review/21924
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: Idad8f7eeed968eeed9f553fef98d58453f328afb
Reviewed-on: https://code.wireshark.org/review/21421
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Tested-by: Michael Mann <mmann78@netscape.net>
The cleanup routine has been added to exit section of the applications.
Those which required a exit restyle have been patched as well.
Change-Id: I3a8787f0718ac7fef00dc58176869c7510fda7b1
Reviewed-on: https://code.wireshark.org/review/19949
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Have programs that use libwiretap call that routine rather than
separately calling some or all of init_open_routines(),
wtap_register_plugin_types(), and wtap_opttypes_initialize().
Also don't have routines internal to libwiretap call those. Yes, this
means doing some initialization work when it isn't necessary, but
scattering on-demand calls throughout the code is a great way to forget
to make those calls.
Change-Id: I5828e1c5591c9d94fbb3eb0a0e54591e8fc61710
Reviewed-on: https://code.wireshark.org/review/19069
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Mirrors the behavior of wtap_close.
Change-Id: I1a04878fdd0409fa74931737332f9b8a1ae77fb1
Reviewed-on: https://code.wireshark.org/review/17620
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
We support reading some types of files that aren't capture files, in
case we have a dissector for that file format (because, for example,
it's often transported over HTTP). Don't include them in the set of
files "All Capture Files" matches; you can still look for them as they
have individual entries in the drop-down menu of file type patterns.
Ultimately, there should be Fileshark/TFileshark programs to read those
files - and other file types, and even capture files if the goal is to
look at the file structure rather than at the packets - and *that's* the
program that should offer the ability to load JPEGs and so on.
(No, this does not reduce the "All Capture Files" list down to a level
that makes the problem in bug 12837 go away. The right way to fix
*that* is to arrange, somehow, that the "All Capture Files" entry not
actually list all the suffixes it matches.)
Change-Id: I705bff5fcd0694c6c6a11892621a195aa7cd0264
Reviewed-on: https://code.wireshark.org/review/17619
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Libpcap just backed out the "host-endian" SocketCAN LINKTYPE_ value; we
don't need it any more.
Change-Id: I33a7dc21207a0009e20b4abaefe1119eb649c39a
Reviewed-on: https://code.wireshark.org/review/17327
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Gerald Combs