If capture file was closed and we have some WiresharkDialogs opened,
then we still need to know filename of capture file
related to specific dialog.
Change-Id: I15f0e5176b87713bf747eead64021619d0bdf039
Reviewed-on: https://code.wireshark.org/review/11025
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I6298b3de5f0a1cb988014ff16082eaf8c2a3c3c0
Reviewed-on: https://code.wireshark.org/review/10786
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
When the user applies a display filter in TapParameterDialog we're about
to start tapping. We need to set the display filter in the main window
but we shouldn't apply it.
Change-Id: I08bed5c7f470f1dbf32817a7d999f09d2c52f168
Reviewed-on: https://code.wireshark.org/review/10287
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Disable the main file close and reload actions while we're retapping,
otherwise many of our dialogs will crash.
Disable the TapParameterDialog filter entry while we're retapping. This
keeps us from enabling the "Apply" button when we shouldn't.
Don't prematurely disconnect our signals in WiresharkDialog.
Change-Id: Iaf507eb4503b9c296766f109f2b8c71343263982
Reviewed-on: https://code.wireshark.org/review/10274
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add cf_cb_file_retap_started and cf_cb_file_retap_finished to file.[ch].
Add their associated signals to CaptureFile.
Add registerTapListener and removeTapListeners to WiresharkDialog, which
collect and automatically remove tap listeners. Add beginRetapPackets
and endRetapPackets, which can be used to wrap critical sections so that
we don't delete ourselves while tapping. Don't cancel tapping on close
in WiresharkDialog.
Use beginRetapPackets and endRetapPackets in WiresharkDialog and
FollowStreamDialog. We will likely need to add them elsewhere.
Update comments.
Change-Id: I1788a6ade0817c31aa3419216df96be5e36b2178
Reviewed-on: https://code.wireshark.org/review/10261
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add ProgressFame::addToButtonBox, which violates the UX guidelines on
every platform we support by inserting a ProgressFrame into a
QDialogButtonBox.
Call addToButtonBox in the constructors of a bunch of dialogs.
Change-Id: I33ac5fd7a976ee6e0527de569a5c4b528980dae1
Reviewed-on: https://code.wireshark.org/review/10242
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Pressing multiple apply while reloading the capture file will
give a crash.
Change-Id: I3587b9ab6b6b7f1437f3a7becb8c35277bb5c62c
Reviewed-on: https://code.wireshark.org/review/10161
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Fix the "retap on show" behavior in TapParameterDialog. It was filling
in the tree when it shouldn't have.
Set the capture stop flag when WiresharkDialog closes.
Change-Id: I5e85f11cab32e8b958deabb58186a855b5fcaa84
Reviewed-on: https://code.wireshark.org/review/10186
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
If we run into an error when trying to register a tap listener, return
instead of tapping packets. This should fix some (but likely not all)
double frees found by Stig. For now close each statistics dialog if we
find an error. Note that we might want to keep them open instead.
Add checks and cleanups to some of the stats table free routines.
Call fillTree once in TapParameterDialog's constructor instead of each
time it's shown. Make fillTree a slot which lets us use a delay timer so
that the dialog is visible when we retap packets.
Change-Id: Id49f2f2a99bc8e5b1d32990024986b3c8b1abe24
Reviewed-on: https://code.wireshark.org/review/10153
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the UDP multicast stream dialog. Abuse TapParameterDialog a bit more
so that we can edit parameters.
Remove some unused struct members and an unused function.
Change-Id: I962c70344e792f0959527e4bcba8a20bd7e8acf9
Reviewed-on: https://code.wireshark.org/review/10084
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
QString.toUtf8() returns a QByteArray object and .constData() returns
a pointer inside that object. It is not safe to store this pointer as
it will become invalid after the statement.
Change-Id: I8f54ede75577719008835038934e935cd5feba3f
Reviewed-on: https://code.wireshark.org/review/10067
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add RpcServiceResponseTimeDialog, which handles DCE-RPC and ONC-RPC
service response time statistics. Try to make it as lightweight as
possible, since we might want to pull this into the RPC dissectors
similar to the other SRT statistics.
Allow program names on the command line in place of numbers or UUIDs. Make
matches case-insensitive. E.g. the following are equivalent:
-z rpc,srt,100003,3
-z rpc,srt,nfs,3
-z rpc,srt,NFS,3
as are the following:
-z dcerpc,srt,f5cc5a18-4264-101a-8c59-08002b2f8426,56
-z dcerpc,srt,nspi,56
-z dcerpc,srt,NSPI,56
Change-Id: Ie451c64bf6fbc776f27d81e3bc248435c5cbc9e4
Reviewed-on: https://code.wireshark.org/review/9981
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The OS X Human Interface Guidelines at
https://developer.apple.com/library/mac/documentation/UserExperience/Conceptual/OSXHIGuidelines/TerminologyWording.html#//apple_ref/doc/uid/20000957-CH15-SW3
says:
"Be sure to create the ellipsis character using the key combination
Option-; (Option-semicolon). This ensures that an assistive app can
provide the correct interpretation of the character to a disabled user.
If you use three period characters to simulate an ellipsis, many
assistive apps will be unable to make sense of them. Also, three period
characters and an ellipsis don't look the same because the periods are
spaced differently than the points of an ellipsis."
The Windows desktop applications guidelines has a section on ellipses:
https://msdn.microsoft.com/en-us/library/windows/desktop/dn742478.aspx
but doesn't specify the a single glyph vs three dots.
The GNOME HIG at
https://developer.gnome.org/hig/stable/typography.html.en
says "Take Advantage of Unicode" then specifically says to use U+2026
HORIZONTAL ELLIPSIS.
Remove the ellipsis from "Find Next" and "Find Previous". Neither
requires user interaction.
Change-Id: I0e6c28bb8b3a84b242731e2ca96f1a6f6f42c303
Reviewed-on: https://code.wireshark.org/review/9833
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Generalize the dynamic menu code and make it possible to connect
multiple types of actions to their corresponding slots.
Change-Id: Ib915ad5a666310e2a6e366fada006336820d1653
Reviewed-on: https://code.wireshark.org/review/9568
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add ServiceResponseTimeDialog as a subclass of TapParameterDialog,
similar to StatsTreeDialog. Add initial plumbing for statistics menu
items and command line invocation.
Don't append "..." to menu item names. Don't add menu icons. In each
case this avoids repetitive UI clutter.
Change-Id: I463b95c93090160bb81d2e80b16aad389dc0bd6c
Reviewed-on: https://code.wireshark.org/review/8864
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
this should make Visual Studio pick up the generated include files
from the build directory instead of the source directory (which may
contain lefovers from an in-tree build)
Change-Id: Ie3de4cdd85a2865e203118a42ab10f443372f03b
Reviewed-on: https://code.wireshark.org/review/9129
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Split StatsTreeDialog into StatsTreeDialog and TapParameterDialog (its
base class). This more closely matches the GTK+ UI and paves the way for
more statistics dialogs.
Change-Id: I2630385534e829d99724673ade372fcb33200d07
Reviewed-on: https://code.wireshark.org/review/8842
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Michal Labedzki