Also make use of TRY_TO_FAKE_THIS_ITEM in proto_tree_add_text_node(), proto_tree_add_none_format() and proto_tree_add_protocol_format().
svn path=/trunk/; revision=29380
routines handled by epan/report_err.c.
Move copy_binary_file() in file.c to epan/filesystem.c, and rename it to
copy_file_binary_mode() (to clarify that it *can* copy text files;
arguably, *all* files are "binary" unless you're on, say, an IBM 1401
:-)). Have it use the report_err.c routines, so it works in
console-mode programs.
Clean up some comments while we're at it.
svn path=/trunk/; revision=27456
some functions to match.
Add GeoIP lookups to the IP dissector. Add a preference for GeoIP lookups,
which is disabled by default.
svn path=/trunk/; revision=27063
GeoIP can map IP addresses to Countries, Cities, AS numbers, ISPs,
etc. If any library paths are defined AND any database files are found,
corresponding columns are added to the endpoint tables in the GUI.
To do:
- Add columns to the conversation list
- Add GeoIP info to "-z conv,..."
- Create a default UAT file.
svn path=/trunk/; revision=26571
memory corruption in tshark (and Wireshark when exiting the program instead
of loading a new file?).
Why this wasn't always here I don't know.
This may give us a pile of buildbot fuzz failures but that's a Good Thing.
svn path=/trunk/; revision=25196
epan/filesystem.c
have get_plugin_dir() calling init_plugin_dir() if necessary
epan/epan.c and epan/report_err.c
move the report_failure family into the new report_err.c file, have epan_init() calling the initializer
epan/plugins.h and epan/proto.c
do not have init_plugins() calling the proto_reg functions instead do it in init_proto()
gtk/main.c and tshark.c
init_plugin_dir() has become suprefluous
capinfos.c and editcap.c
load the wiretap plugins
Makefiles
do what's needed to build withe the above changes.
svn path=/trunk/; revision=21935
The splash screen shows a progress bar and a percentage complete - like the progress dialog.
As dissectors are initialised and handed off the name is shown. However, the names of plugin dissectors are not shown.
The update to the make-dissector-reg shell script has been tested, though I think generally the python version is used.
svn path=/trunk/; revision=21716
if set, and if the program isn't running with additional privileges,
it'll treat the directory in which the program is found as the data
directory.
If, on Windows, the version-number subdirectory of {data
directory}\plugins doesn't exist (which is assumed to mean that the
program is being run from the build directory), or if, on UN*X,
WIRESHARK_RUN_FROM_BUILD_DIRECTORY is set, the plugin directory is the
"plugins" subdirectory of the data directory, and all subdirectories of
that directory are scanned for plugins, as the "plugins" subdirectory of
the build directory contains subdirectories for the plugins; this means
that if we're running from the build directory, we'll find the plugins
we built in the build tree.
When generating the wireshark-filter man page, run tshark with
WIRESHARK_RUN_FROM_BUILD_DIRECTORY set, so it uses the plugins from the
build to generate the list of filters.
svn path=/trunk/; revision=20261
including dftest - will get the GUID table initialized (which anything
that needs libwireshark needs to have happen, so dissectors can register
GUIDs in that table).
svn path=/trunk/; revision=19939
Please see: http://wiki.ethereal.com/Development/ExpertInfo for a complete overview of the intended feature and it's current state of implementation.
While I'm working on this, I've also added some more status result codes to the DCE/RPC and DCOM dissectors.
svn path=/trunk/; revision=15754
This offesr memory allocation with a packet scope making memory leaks less likely and memory management faster.
Add initialization calls for both tethereal and ethereal.
Convert the ip_to_str() function to use this and avoid doing the silly rotating buffers thing it previously did.
We also need an equivalent set of functions for allocation with capture file scope (free when next capture is loaded) but i dont know where to put the free_all call.
svn path=/trunk/; revision=14984
include of <resolv.h> in any system header file gets the system
<resolv.h> (needed for builds on Tru64 with GTK+ 1.2[.x]).
svn path=/trunk/; revision=11615
they have LF at the end of the line on UN*X and CR/LF on Windows;
hopefully this means that if a CR/LF version is checked in on Windows,
the CRs will be stripped so that they show up only when checked out on
Windows, not on UN*X.
svn path=/trunk/; revision=11400
errors to the user. Use that, rather than "g_warning()", in the
Diameter dissector to report errors reading the dictionary.
Make the format argument to "simple_dialog()" a "const" pointer.
Fix up the read-error message in Tethereal to end with a newline.
If a simple dialog is requested before the main window or the
capture-control window is popped up, queue it up and pop the queued
messages up once the main or capture-control window is displayed.
svn path=/trunk/; revision=10616
that dissectors should call to report file open and read errors, and
have "report_open_failure()" and "report_read_failure()" call through
those pointers, rather than being defined and exported by the
application using libethereal - instead, the application would define
those functions and pass pointers to them to 'epan_init()".
Move "report_err.h" to the epan directory, as the functions it declares
are now part of the libethereal API.
svn path=/trunk/; revision=10470
Support can be enabled at configure time by using "--with-adns=DIR".
If support is enabled, async queries happen whenever host name resolution
is enabled. Do we need a separate preference for async queries?
Currently, only IPv4 reverse queries are supported. I can add IPv4 forward
lookup support, but I don't have any way to test IPv6 queries.
svn path=/trunk/; revision=7640
protocols (where there's a virtual circuit ID of some sort in packets)
what conversations are for protocols ultimately running atop
connectionless network layers. Have circuit type and ID values in the
"packet_info" structure.
Have the Frame Relay dissector set the circuit type and ID values, and
have the Wellfleet compression protocol set up circuit information and
store compression information with the circuit.
svn path=/trunk/; revision=6469
it's handed a pointer, which means that "epan_dissect_prime_dfilter()"
doesn't do so either; make that argument a "const dfilter_t *" in both
cases.
svn path=/trunk/; revision=6239
One example extension is rpcstat.
Try -Z rpc,rtt,100003,3 as argument to tethereal when reading a capture
containing NFSv3 packets.
tap-rpcstat.[ch] is intended to demonstrate the api and can be used to
base other extensions on.
svn path=/trunk/; revision=6175
in the "packet_info" structure instead, as we don't need a pointer for
every single frame in the capture file, just for each frame for which we
currently have an open "epan_dissect_t".
svn path=/trunk/; revision=5614
A little work still needs to be done on the new NCP dissector -- make
some of the COL_INFO texts more useful, handle a Unicode issue, and
modify some of the cases that use "request conditions".
But the NCP dissector as it stands is very usable now.
Note: I didn't merge in the PROTO_LENGTH_UNTIL_END macro... I wanted
to think about the various possible macros and review an email conversation
I had with Guy on the subject.
svn path=/trunk/; revision=5432
"data source" has a name and a top-level tvbuff, and frames can have a
list of data sources associated with them.
Use the tvbuff pointer to determine which data source is the data source
for a given field; this means we don't have to worry about multiple data
sources with the same name - the only thing the name does is label the
notebook tab for the display of the data source, and label the hex dump
of the data source in print/Tethereal output.
Clean up a bunch of things discovered in the process of doing the above.
svn path=/trunk/; revision=4749
Put a hash-table of "interesting" fields in the per-proto-tree data.
The dfilter code records which fields/protocols are "interesting" (by which
I mean, their value or existence is checked). Thus, the proto_tree routines
can create special arrays of field_info*'s that are ready for the dfilter
engine to use during a filter operation.
Also store the "proto_tree_is_visible" boolean, renamed "visible", in
the per-proto-tree data.
Move epan_dissect_t to its own header file to make #include dependencies
easier to handle.
Provide epan_dissect_fill_in_columns(), which accepts just the epan_dissect_t*
as an argument.
epan_dissect_new() needs to be followed by epan_dissect_run() for the
dissection to actually take place. Between those two calls,
epan_dissect_prime_dfilter() can be run 0, 1, or multiple times in order to
prime the empty proto_tree with the "intersesting" fields from the dfilter_t.
svn path=/trunk/; revision=4422
display representation should be put into protocol tree items if a
protocol tree is to be constructed; have it set "proto_tree_is_visible"
from that argument.
svn path=/trunk/; revision=4408
structure to the "packet_info" structure; only stuff that's permanently
stored with each frame should be in the "frame_data" structure, and the
"column_info" structure is not guaranteed to hold the column values for
that frame at all times - it was only in the "frame_data" structure so
that it could be passed to dissectors, and, as all dissectors are now
passed a pointer to a "packet_info" structure, it could just as well be
put in the "packet_info" structure.
That saves memory, by shrinking the "frame_data" structure (there's one
of those per frame), and also lets us clean up the code a bit.
svn path=/trunk/; revision=4370
already contain a pointer to an epan_dissect_t, which contains
the proto_tree.
Routines calling epan_dissect_new() do not create their own
proto_tree via proto_tree_create_root(); instead, they pass a boolean
to epan_dissect_new() telling it whether it should create the root
proto_tree.
svn path=/trunk/; revision=4343
access their own "pinfo". A packet_info is stored in epan_dissect_t,
which is created for the dissection of a single packet.
GUI functions which need to access the packet_info of the currently
selected packet used to use "pi"; now they use cfile.edt->pi. cfile's
"edt" member is the epan_dissect_t of the currently-selected packet.
The functionality of blank_packetinfo() was moved into
dissect_packet(), as that's the only place that called blank_packetinfo(),
after a spurious call to blank_packetinfo() was removed from
packet_list_select_cb().
svn path=/trunk/; revision=4246
allow the passing of register_all_protocols() and
register_all_protocol_handoffs() through epan_init() to proto_init().
This allows the removal of the compile time dependence of proto.c
on register.h. Modified dftest.c, tethereal.c, and gtk/main.c to
use the new style epan_init() and depend on register.h.
svn path=/trunk/; revision=3237
dissector_handle in a static variable in packet.c. Changed dissect_packet
to call dissector from using the call_dissector() function and the cached
dissector_handle for frame_dissector. Changed the order of function
calls in epan_init() to allow for this change ( it sucks to look up
a dissector when none are registered ).
svn path=/trunk/; revision=3234
Kovarththanan Rajaratnam