https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8824
Convert bluetooth emem trees to wmem trees.
Add modelines and fix indentation.
Correct typo in wmem_tree.h that still referred to emem.
svn path=/trunk/; revision=50076
1. Allow to DecodeBy payload over AVCTP
2. Fix L2CAP CID payload recognize after disc
3. Removed unneeded _U_
4. Fall back to control channel in AVRCP
5. Fix time-tracking for passthrough and capability AVRCP commands
From Michal Labedzki, bug 8367 (https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8367)
svn path=/trunk/; revision=47810
tvbuff and runs to the end of the tvbuff? Let me count the ways....
Replace a bunch of different ways of doing that (some incorrect, in that
they're not properly handling tvbuffs where the captured and reported
lengths are different) with tvb_new_subset_remaining().
svn path=/trunk/; revision=47751
Make a loop counter a full-width integer, just to be sure.
Do *NOT* assume that pinfo->private_data is non-null; I have at least
one capture where it is null when dissect_bthci_evt_command_complete()
is captured.
svn path=/trunk/; revision=46743
Bluetooth: Add support for source/destination addresses
Within resolving devices names. Also make header file more generic,
packet-hci_h4.h renamed to packet-bluetooth-hci.h.
Part of:
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5032
svn path=/trunk/; revision=46278
Add support for HCI 3.0+HS and v4.0, Bluetooth Low Energy. This includes
dissection of additional HCI commands and events, Attribute Protocol and
Security Manager Protocol.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=7872
svn path=/trunk/; revision=45709
The attached (trivial) patch adds some missing breaks in switch-case blocks.
This fixes coverity defects #445, #446, #1316 and #1380.
svn path=/trunk/; revision=41727
1. If there's no character encoding (ENC_ASCII, ...) specified
then use ENC_ASCII.
2. For all but FT_UINT_STRING, always use ENC_NA
(replacing any existing True/1/FALSE/0
/ENC_BIG_ENDIAN/ENC_LITTLE_ENDIAN).
svn path=/trunk/; revision=39426
FT_NONE
FT_BYTES
FT_IPV6
FT_IPXNET
FT_OID
Note: Encoding field set to ENC_NA only if the field was previously TRUE|FALSE|ENC_LITTLE_ENDIAN|ENC_BIG_ENDIAN
svn path=/trunk/; revision=39260
keys to have _uint in their names, to match the routines that handle
dissector tables with string keys. (Using _port can confuse people into
thinking they're intended solely for use with TCP/UDP/etc. ports when,
in fact, they work better for things such as Ethernet types, where the
binding of particular values to particular protocols are a lot
stronger.)
svn path=/trunk/; revision=35224
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
Added support for Symbian OS btsnoop.
The bluetooth HCI layer in Symbian OS can be configured to log all packets to a
file. The log format, "btsnoop" is based on the RFC1761 "snoop" format - but
differences in the header make it incompatible.
The btsnoop format supports logging of these formats:
"H1" (raw HCI packets without framing)
"H4" (HCI UART packets including packet type header)
"H5" (HCI 3 wire UART packets including framing)
"BCSP" (HCI bluecore serial protocol including framing)
"H1" and "H4" are section numbers in the original v1 bluetooth specifications,
but still used colloquially - wireshark's existing support for Linux bluez HCI
logs uses the "H4" name.
In practice, the "H1" format is used for H5,BCSP and USB HCI logs, as the HCI
packet logs are mainly useful for debugging higher layers, bluetooth profiles
and bluetooth applications.
From me:
Deleted some unused prototypes.
Mark an unused parameter.
svn path=/trunk/; revision=24263
Wireshark is only supporting a very old and deprecated version of the Bluetooth
specification (1.1). The Bluetooth SIG recently ratified version 2.1 of the
Bluetooth specification and a lot of enhancements have been added to the
specification. The HCI dissectors needs a major update to match these changes.
svn path=/trunk/; revision=22924