Clean up a comment and indentation while we're at it.
Change-Id: Ia2b0a3f642849dcd464e04cdca13ff05c2fbe2e6
Reviewed-on: https://code.wireshark.org/review/4717
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Nothing from the SHB gets stored in the interfaces array - it's filled
in from IDBs - so it doesn't need to exist when we read the first SHB,
and thus doesn't need to be freed if the attempt to read the SHB gets an
error or a "this isn't a pcap-ng file" indication.
Update a comment while we're at it.
Change-Id: Ie67edb52dcf13c974607e95e290661bf48be68ae
Reviewed-on: https://code.wireshark.org/review/4711
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The block read routines don't need to return a "bytes read" amount any
more.
Have pcapng_read_block() just return an indication:
PCAPNG_BLOCK_OK - the read succeeded;
PCAPNG_BLOCK_NOT_SHB - the read failed in a fashion that
indicates that we might just not be reading a pcap-ng file;
PCAPNG_BLOCK_ERROR - the read failed in some other fashion
(i.e., we already have concluded that the file is a pcap-ng
file, or we got an I/O error).
In the cases where it needs to know whether it's reading the first block
for an open, have it check the shb_read flag, rather than being passed a
separate Boolean argument.
This means that pcapng_read_section_header_block() should return such an
indication as well.
Make the other block-reading routines return a Boolean success/failure
indication.
Change-Id: Id371457018a008ece9058d6042da44d631e51889
Reviewed-on: https://code.wireshark.org/review/4710
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Don't check a possibly-byte-swapped length against the minimum SHB size;
it'll probably look huge if it's byte-swapped, so the test won't fail
even if it is too small, and a really huge SHB's length could look too
small if it's byte-swapped.
Do the check *after* we've read the fixed-length portion of the block;
yes, that means we've read past the purported size of the block at that
point, but if that read succeeds, that doesn't matter, and if that read
fails, it just means we'll report "file cut short" rather than "bad SHB
length", *both* of which are problems with the file.
Change-Id: Ie3b5700662f2a6da40d373a84f00a8fc2cf0ce1b
Reviewed-on: https://code.wireshark.org/review/4692
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Recent changes must have made it not do so in some cases, and
our current version of file_tell(), unlike ftell() around which the
older file_tell() was a wrapper, is known to be cheap (ftell() would
make a system call to get the position). Just use file_tell() before
each read.
(Further cleanup is called for.)
Bug: 10568
Change-Id: Ib92057b2b87ec6eb16fd612bc91baeb668d1e1c7
Reviewed-on: https://code.wireshark.org/review/4691
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Check whether the block-type hash table exists before trynig to look
up anything in it.
Change-Id: I0aeb7f6454903bfcbdd0716909a0b72851d87233
Reviewed-on: https://code.wireshark.org/review/4689
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Clean up some things we ran across while making those changes.
Change-Id: Ic0d8943d36e6e120d7af0a6148fad98015d1e83e
Reviewed-on: https://code.wireshark.org/review/4581
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Unlike the standard I/O routines, the code we introduced that supports
fast random seeking on gzipped files will always supply some specific
error code for read errors, so we don't need WTAP_ERR_CANT_READ.
Add WTAP_ERR_CANT_WRITE for writing, as we're still using the standard
I/O routines for that. Set errno to WTAP_ERR_CANT_WRITE before calling
fwrite() in wtap_dump_file_write(), so that it's used if fwrite() fails
without setting errno.
Change-Id: I6bf066a6838284a532737aa65fd0c9bb3639ad63
Reviewed-on: https://code.wireshark.org/review/4540
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add wtap_read_bytes(), which takes a FILE_T, a pointer, a byte count, an
error number pointer, and an error string pointer as arguments, and that
treats a short read of any sort, including a read that returns 0 bytes,
as a WTAP_ERR_SHORT_READ error, and that returns the error number and
string through its last two arguments.
Add wtap_read_bytes_or_eof(), which is similar, but that treats a read
that returns 0 bytes as an EOF, supplying an error number of 0 as an EOF
indication.
Use those in file readers; that simplifies the code and makes it less
likely that somebody will fail to supply the error number and error
string on a file read error.
Change-Id: Ia5dba2a6f81151e87b614461349d611cffc16210
Reviewed-on: https://code.wireshark.org/review/4512
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Pcap-ng files don't have a per-file time stamp resolution, they have a
per-interface time stamp resolution. Add new time stamp resolution
types of "unknown" and "per-packet", add the time stamp resolution to
struct wtap_pkthdr, have the libwiretap core initialize it to the
per-file time stamp resolution, and have pcap-ng do the same thing with
the resolution that it does with the packet encapsulation.
Get rid of the TS_PREC_AUTO_XXX values; just have TS_PREC_AUTO, which
means "use the packet's resolution to determine how many significant
digits to display". Rename all the WTAP_FILE_TSPREC_XXX values to
WTAP_TSPREC_XXX, as they're also used for per-packet values.
Change-Id: If9fd8f799b19836a5104aaa0870a951498886c69
Reviewed-on: https://code.wireshark.org/review/4349
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The dump of the address info list must be differed to the end of the processing so as to know which host name was actually used in the capture
Bug: 10507
Change-Id: I44dbfae918d4ae92f9740c309804c7ff21bb4e1b
Reviewed-on: https://code.wireshark.org/review/4327
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Make sure to zero the *entire* thing, and only access it as a given type when
that's the type indicated by the (non-union) type field.
Bug: 10498
Change-Id: I3e94a9c5d399d3ee4aedcd49f1aa2d7678ecf7ce
Reviewed-on: https://code.wireshark.org/review/4273
Petri-Dish: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
Should fix the remaining test suite failures.
Change-Id: I50a6cb1bf57bd6a973d4777349708b75aeb41620
Reviewed-on: https://code.wireshark.org/review/4264
Reviewed-by: Evan Huus <eapache@gmail.com>
I *think* I got all the cases; I got most of them, at any rate, and enough to
shut up valgrind in all the test cases I ran.
Change-Id: I393bac0756f577b65e400b792f6719fa6ec4056a
Reviewed-on: https://code.wireshark.org/review/4244
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Evan Huus <eapache@gmail.com>
The only place where a short read should be treated as an EOF is if the
read of the block header reads 0 bytes. All other short reads,
including reads of the block header returning at least 1 byte but not
enough for a complete block header, and any reads of the stuff
*following* the block header even if they return 0 bytes, should be
treated as "short read" errors.
If the option length is bigger than the option buffer size, treat that
as a bad file (I'm not sure that can happen, so maybe it should be
treated as an internal error instead).
Use file_skip() rather than file_seek() when skipping forward N bytes.
If it fails, treat that as an error under all circumstances.
When reading the first section header block in the open routine, have
pcap_read_block() return -2 if it doesn't look like an SHB (too short,
wrong block type, bad block length, unknown byte-order magic number), as
that means the file isn't a pcap-ng file and the open should return 0.
Return -1, not 0, for all errors in various block-reading routines.
file_seek() returning 0 is *not* an error. file_seek() returning -1 (or
any other negative number *is* an error; its return value is signed, so
don't assign it to an unsigned variable.
This might fix the test errors for the Lua file format handler tests.
Change-Id: Ifa7d9834c38bf238461c9cc9625a2aa761cb6ff2
Reviewed-on: https://code.wireshark.org/review/4238
Reviewed-by: Guy Harris <guy@alum.mit.edu>
pcap_read_block() takes err and err_info arguments, and sets them on
error; no need to call file_error() if pcap_read_block() fails.
Change-Id: I33b96d31395bf7d66abdecbebd5cf775e8662004
Reviewed-on: https://code.wireshark.org/review/4209
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In particular, epan/wslua/lrexlib.c has its own buffer_ routines,
causing some linker warnings on some platforms, as reported in bug
10332.
(Not to be backported to 1.12, as that would change the API and ABI of
libwsutil and libwiretap. We should also make the buffer_ routines in
epan/wslua/lrexlib.c static, which should also address this problem, but
the name change avoids other potential namespace collisions.)
Change-Id: I1d42c7d1778c7e4c019deb2608d476c52001ce28
Reviewed-on: https://code.wireshark.org/review/3351
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Otherwise, if you link with both libwiretap and libfiletap, it's
anybody's guess which one you get. That means you're wasting memory
with two copies of its routines if they're identical, and means
surprising behavior if they're not (which showed up when I was debugging
a double-free crash - fixing libwiretap's buffer_free() didn't fix the
problem, because Wireshark happened to be calling libfiletap' unfixed
buffer_free()).
There's nothing *tap-specific about Buffers, anyway, so it really
belongs in wsutil.
Change-Id: I91537e46917e91277981f8f3365a2c0873152870
Reviewed-on: https://code.wireshark.org/review/3066
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have two different classes of file-type-specific records - "events" and
"reports". An "event" indicates something that happened in the capture
process, such as a status transition on the network; a "report" just
gives information not corresponding to something happening in the
capture process, such as capture statistics.
Note that both of those should be dissected and displayed like packets,
and leave open the possibility of file-type-specific records whose
contents should be processed and saved but not displayed in the packet
list.
Shorten "file_type_specific" to "ft_specific".
Change-Id: I2342d82ef992c794b76f354c057823dd5eb371e6
Reviewed-on: https://code.wireshark.org/review/1779
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We rename "file format" plugins to "libwiretap" plugins, as they can
register as read handlers for a new file type, read/write handlers for a
pcap-ng block type (or both).
To register as a pcap-ng block type handler, in the
register_wtap_module() routine of your plugin, call
register_pcapng_block_type_handler() with the pcap-ng block type and
pointers to your routines to read and write those blocks. Those
routines should read and write REC_TYPE_FILE_TYPE_SPECIFIC records, with
the block type in the pseudo-header for the record in the struct
wtap_pkthdr structure, with time stamps stored in that structure, and
with a blob of data for the rest of the record.
This is for bug 8590.
Change-Id: I71847d834854a29ceb85894fd094c2ae91a04273
Reviewed-on: https://code.wireshark.org/review/1775
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a "record type" field to "struct wtap_pkthdr"; currently, it can be
REC_TYPE_PACKET, for a record containing a packet, or
REC_TYPE_FILE_TYPE_SPECIFIC, for records containing file-type-specific
data.
Modify code that reads packets to be able to handle non-packet records,
even if that just means ignoring them.
Rename some routines to indicate that they handle more than just
packets.
We don't yet have any libwiretap code that supplies records other than
REC_TYPE_PACKET or that supporting writing records other than
REC_TYPE_PACKET, or any code to support plugins for handling
REC_TYPE_FILE_TYPE_SPECIFIC records; this is just the first step for bug
8590.
Change-Id: Idb40b78f17c2c3aea72031bcd252abf9bc11c813
Reviewed-on: https://code.wireshark.org/review/1773
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit c0c480d08c.
A better way to do this is to have the record type be part of struct wtap_pkthdr; that keeps the metadata for the record together and requires fewer API changes. That is in-progress.
Change-Id: Ic558f163a48e2c6d0df7f55e81a35a5e24b53bc6
Reviewed-on: https://code.wireshark.org/review/1741
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is the first step towards implementing the mechanisms requestd in
bug 8590; currently, we don't return any records other than packet
records from libwiretap, and just ignore non-packet records in the rest
of Wireshark, but this at least gets the ball rolling.
Change-Id: I34a45b54dd361f69fdad1a758d8ca4f42d67d574
Reviewed-on: https://code.wireshark.org/review/1736
Reviewed-by: Guy Harris <guy@alum.mit.edu>
While investigating an ASAN issue (fixed in
commit dcdd076ab0), I got greatly confused
by three different types having the same "interface_data" field name:
* pcapng_t *pn stores an array of interface_data_t objects.
* wtap *wth stores an array of wtapng_if_descr_t objects.
* pcapng_dump_t should store an array of interface_data_t objects.
pcapng_dump_t and friends are unused since
commit c7f1a431d2, so drop it.
To fix the confusion, rename the interface_data_t type to
interface_info_t type and use the local variable "iface_info"
everywhere. Rename interface_data of pcapng_t to "interfaces" and
add a comment what this exactly means (interfaces listed in the capture
file).
Drop the number_of_interfaces field for interfaces as the array
length is already available from GArray. Now interface_data is always
initialized for wth (which also gets copied to idb).
s/int/guint/g and replace cast at some places.
There are no regressions for the in-tree test suite.
Change-Id: I2d5985c9f1e43f8230dbb4a73bd1e243c4858170
Reviewed-on: https://code.wireshark.org/review/1656
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This reverts commit 1abeb277f5.
This isn't building, and looks as if it requires significant work to fix.
Change-Id: I622b1bb243e353e874883a302ab419532b7601f2
Reviewed-on: https://code.wireshark.org/review/1568
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Start of refactoring Wiretap and breaking structures down into "generally useful fields for dissection" and "capture specific". Since this in intended as a "base" for Wiretap and Filetap, the "wft" prefix is used for "common" functionality.
The "architectural" changes can be found in cfile.h, wtap.h, wtap-int.h and (new file) wftap-int.h. Most of the other (painstaking) changes were really just the result of compiling those new architecture changes.
bug:9607
Change-Id: Ife858a61760d7a8a03be073546c0e7e582cab2ae
Reviewed-on: https://code.wireshark.org/review/1485
Reviewed-by: Michael Mann <mmann78@netscape.net>
We don't fail for other file types; there's no point in failing for
pcap-NG. wtap_read() will ensure that caplen <= len.
Make wtap_seek_read() ensure that caplen <= len as well.
Fixes bug 10037.
Change-Id: I41fbcf54341ea0429cef875442ea1f1377177a5f
Reviewed-on: https://code.wireshark.org/review/1353
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This patch causes Wireshark/tshark to segfault if the file is reread(open a file and press reload).
The test suite also fails on
2.1.1 Step: Exit status for existing file: "/home/wireshark/builders/trunk/sol10sparc/build/test/captures/dhcp.pcap" must be 0/home/wireshark/builders/trunk/sol10sparc/build/test/suite-clopts.sh: line 149: 6646 Segmentation Fault (core dumped) $TSHARK -r "${CAPTURE_DIR}dhcp.pcap" > ./testout.txt 2>&1
OSX build bot chokes on
pcapng.c: In function 'pcapng_destroy_option_value':
pcapng.c:377: warning: implicit declaration of function 'g_byte_array_unref'
pcapng.c:379: warning: implicit declaration of function 'g_array_unref'
pcapng.c: In function 'pcapng_collect_block_option':
pcapng.c:419: warning: implicit declaration of function 'g_byte_array_new_take'
pcapng.c:419: warning: initialization makes pointer from integer without a cast
these functions are glib 2.22
This reverts commit 7b13a3b0f6.
Change-Id: Ia82fdb2d08287bc2cd2841e1e941ae68cbc2e009
Reviewed-on: https://code.wireshark.org/review/749
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Interface options[1], and more generally pcapng options[2], are useful
information that can provide improved dissector output.
Prior to this change, only certain pcapng interface options were interpreted
and made available to dissectors, e.g. the interface name or description.
This change augments the situation by providing epan_get_interface_option( ),
which returns an array of byte arrays if the option code exists
(otherwise NULL). Each element of the array is a byte buffer containing
the raw data of the option. An array-of-buffers is used because pcapng
allows for multiple instances of the same option to be present in the file.
All interface options found in a pcapng file are thus made available to the
dissector.
The implementation also provides infrastructure to collect options from
other pcapng blocks such as the section header. Currently these options
are discarded, but could be retained in the future to support more features.
[1] http://www.winpcap.org/ntar/draft/PCAP-DumpFileFormat.html#sectionidb
[2] http://www.winpcap.org/ntar/draft/PCAP-DumpFileFormat.html#sectionopt
Change-Id: I944b6f0f03dde9b8e7d1348b76acde6f9d312f37
Reviewed-on: https://code.wireshark.org/review/331
Reviewed-by: Anders Broman <a.broman58@gmail.com>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
For some routines that take multiple arguments that come from a struct
wtap_pkthdr, pass a pointer to the struct wtap_pkthdr in question,
rather than the separate arguments. Do this even if we're passing
expressions that were earlier assigned to the struct wtap_pkthdr fields
in question. This simplifies the calling sequences and ensures that the
right values are picked up by the called routine; in at least one case
we were *not* passing the right values (the code to handle Simple Packet
Blocks in pcap-ng files).
Also, call the byte-swapping routines for pseudo-header fields only if
we need to do byte-swapping.
Change-Id: I3a8badfcfeb0237dfc1d1014185a67f18c0f2ebe
Reviewed-on: https://code.wireshark.org/review/119
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
willing to read or that's bigger than will fit in the file format;
instead, report an error.
For the "I can't write a packet of that type in that file type" error,
report the file type in question.
svn path=/trunk/; revision=54882
XXX, people are not aware that expression of this macros might be evaluated multiple times, like:
- BSWAP16(tvb_get_letohs(tvb, off)) : \
+ GUINT16_SWAP_LE_BE(tvb_get_letohs(tvb, off)) : \
Should be tvb_get_ntohs() called?
svn path=/trunk/; revision=53653
subtypes, e.g. Network Monitor version 1 and Network Monitor version 2
are separate "file types", even though they both come from Network
Monitor.
Rename various functions, #defines, and variables appropriately.
svn path=/trunk/; revision=53166
whether the (zero-based) interface ID is < the number of interface IDs,
so we don't need to do so in pcapng_read().
Unions are tricky - if the compiler doesn't ensure that the right
component of the union is being used at any given time, various problems
can happen.
Remove some members from the "data" union in the wtapng_block_t
structure, and use a local variable of the specified type.
svn path=/trunk/; revision=52262
