Sorting behavior should be identical to GTK+.
Pass the correct position to beginInsertRows. Add a list of to-do items
to packet_list.cpp.
Change-Id: Ie6ab4b9f2d780a2af430d0f90529edca5485dada
Reviewed-on: https://code.wireshark.org/review/4481
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Fill in the capture-related mise en place so that -k and -i work. Get
rid of global_capture_session in ui/qt and make it a member of
MainWindow.
Copy over privilege checking from GTK+.
Move the global capture session struct to MainWindow.
Change-Id: Iab5ec683860a40255a7e1d82e3872ced24fd55cb
Reviewed-on: https://code.wireshark.org/review/4382
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Rename simple_dialog_qt.{cpp,h} to simple_dialog.{cpp,h}. Make it a
subclass of QMessageBox. Queue messages at startup similar to GTK+.
Move the GTK+-specific simple_dialog declarations to
gtk/simple_dialog.h.
Don't yell at the user so much. Replace exclamation points with periods.
Change-Id: I1cc771106222d5e06f1f52d67ac29d6dc367cce4
Reviewed-on: https://code.wireshark.org/review/4288
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Plumb signals and slots for changing the text size in the main window.
Remove the bold font code from WiresharkApplication. It was only used in
ByteViewText. Adjust the icons a bit.
Bug: When we change the font preferences the packet list stops drawing
cached strings. I haven't been able to track down the cause.
Change-Id: I609d740c9f26265628fa4b7de1b75b0e56651387
Reviewed-on: https://code.wireshark.org/review/4269
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The GNOME HIG says "Where a corresponding toolbar icon exists, a menu
icon should mirror its design." The Windows and OS X HIGs say that you
should use them for common or familiar actions but otherwise avoid
clutter. I think icons in the "File" menu look like crap. Try to strike
a balance.
Use the 16x16 application icon for both the main web site and the wiki
since that's the favicon used on both sites.
Assume that "Reload" isn't used very often and remove it from the
toolbar.
Don't use a menu icon for the about box.
Other minor fixups.
Change-Id: I855211c218d266c2e9ed5acbe05a08750ab6d157
Reviewed-on: https://code.wireshark.org/review/4246
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add ".on" versions of the x-capture-start icon along with corresponding
code in the StockIcon constructor to look for ".on" variants and add
them with the QIcon::On state.
Make the plain versions of x-capture-start blue to match the general
application icon. The goal is to make the toolbar and app icon fins blue
when Wireshark is "at rest" and green when it's capturing.
Change-Id: I31f4f9d910fc99c41d7c63bd9a722db1611760c7
Reviewed-on: https://code.wireshark.org/review/4225
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The new icons are patterned after the existing capture icons. They could
probably benefit from some adjustments here and there.
Start moving toward icon names and a directory layout compliant with
freedesktop.org's Icon Naming Specification and Icon Theme
Specification. We aren't fully compliant and might never be but anyone
with exposure to FDO icon themes should at least know where everything
is.
Make Capture Start (x-capture-start) the first icon in the toolbar.
Define the Colorize Packets, Auto Scroll, and zoom icons even though the
Qt UI doesn't use them yet.
Leave the Capture Filter, Display Filter, Coloring Rules, Preferences,
and Help icons off for now. The GTK+ toolbar is overly cluttered and I'm
not sure they're necessary.
Try not to break ui/gtk/toolbar_icons.h.
Remove welcome.qrc. I initially added it in case we needed to overlay
the welcome screen with translucent .pngs but that never happened.
To do:
- Move the old GTK+ icons to their own directory.
- Find a better name for the "toolbar" directory. "stock"?
- Make the toolbar configurable.
Change-Id: Ie07592113d307b8db786aedace672312a870fe38
Reviewed-on: https://code.wireshark.org/review/4182
Reviewed-by: Gerald Combs <gerald@wireshark.org>
That better indicates that it reflects changes to the list of local
interfaces on the system, as supplied by libpcap/WinPcap, not to any
other interface list we maintain, such as lists of remote interfaces, or
the list of non-hidden interfaces.
Change-Id: Idf79b365e07f2e3eaa83c105ae9cd7ace54c435e
Reviewed-on: https://code.wireshark.org/review/3154
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Trigger dialog creation by passing a method name to
QMetaObject::invokeMethod. I'm not entirely sure this is sane but it
seems to work OK. Move getopt processing further down in the main initialization sequence
to more closely match GTK+ and allow for stat command registration.
Change-Id: I5cd5375fa71dbadac69d528b2ba3bb13598dc3f6
Reviewed-on: https://code.wireshark.org/review/2964
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Some of those routines are used only in dumpcap; others are used in
TShark and Wireshark as well.
Change-Id: I9d92483f2fcff57a7d8b6bf6bdf2870505d19fb7
Reviewed-on: https://code.wireshark.org/review/2841
Reviewed-by: Guy Harris <guy@alum.mit.edu>
- allow to change the interface options in the table
- save the options to preferences when the dialog is left
- add a field for setting a capture filter for all selected interfaces
- add a "Compile BPF" button and a window to show the compiled filter output
- try to address Alexis' and Evan's comments
Change-Id: Ic1272e29183ec80e2d2f4b3e494c79dabe2c3b6f
Reviewed-on: https://code.wireshark.org/review/1946
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a "record type" field to "struct wtap_pkthdr"; currently, it can be
REC_TYPE_PACKET, for a record containing a packet, or
REC_TYPE_FILE_TYPE_SPECIFIC, for records containing file-type-specific
data.
Modify code that reads packets to be able to handle non-packet records,
even if that just means ignoring them.
Rename some routines to indicate that they handle more than just
packets.
We don't yet have any libwiretap code that supplies records other than
REC_TYPE_PACKET or that supporting writing records other than
REC_TYPE_PACKET, or any code to support plugins for handling
REC_TYPE_FILE_TYPE_SPECIFIC records; this is just the first step for bug
8590.
Change-Id: Idb40b78f17c2c3aea72031bcd252abf9bc11c813
Reviewed-on: https://code.wireshark.org/review/1773
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That variable is only defined if we HAVE_LIBPCAP. Should fix OSX10.5 buildbot.
Change-Id: I0bafc48955ef4af3c0b8d9d7a35b1e8b27577d31
Reviewed-on: https://code.wireshark.org/review/1669
Reviewed-by: Evan Huus <eapache@gmail.com>
For each graph you can set:
- Its visibility
- A name
- A display filter
- Color, from a fixed list
- Plot style: Line, Impulse, Bar, Stacked Bar, Dot, Square, Diamond
- Basic Y Axes (packets/s, bytes/s, bits/s)
- Computed Y Axes (SUM, MIN, AVG, MAX)
- Smoothing
You can pan and zoom using the mouse and keyboard. Clicking on a graph
selects the last packet for that interval. If all graphs have the same Y
axis a single label is shown, otherwise a legend is shown.
The time scale (X axis) can be toggled between relative seconds and the
time of day.
Graphs can be saved as PDF, PNG, BMP, and JPEG. Settings are "sticky"
via the io_graphs UAT.
To do:
- Minimize graph drawing delays.
- Figure out why smoothing differs from GTK+
- Everything else at the top of io_graph_dialog.cpp
- Fix empty resets.
A fair amount of code was copied from TCPStreamDialog. We might want to
subclass QCustomPlot and place the shared code there.
Move common syntax checking to SyntaxLineEdit.
Move some common code from ui/gtk/io_stat.c to ui/io_graph_item.[ch] and
use it in both GTK+ and Qt.
Make the io_graph_item_t array allocation in io_stat.c static. The
behavior should be identical and this gives us additional compile-time
checks.
Change-Id: I9a3d544469b7048f0761fdbf7bcf20f44ae76577
Reviewed-on: https://code.wireshark.org/review/435
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
Rebase with last change and add Logcat export
Change-Id: Idc9b444b1bf14b95ff60e8466e94f7eecd875b47
Reviewed-on: https://code.wireshark.org/review/14
Reviewed-by: Anders Broman <a.broman58@gmail.com>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The best heuristic can fail, so add possibility to manually choose
capture file format type, so not correctly recognize file format can be
loaded in Wireshark.
On the other side now it is possible to open capture file
as file format to be dissected.
Change-Id: I5a9f662b32ff7e042f753a92eaaa86c6e41f400a
Reviewed-on: https://code.wireshark.org/review/16
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Evan Huus <eapache@gmail.com>
From me : Add window title and fix missing text (Do you want to ....)
Change-Id: I1448d7b85ad9490a92dac7e89d9fd2fdb51a145e
Partial-Bug: 9003
Reviewed-on: https://code.wireshark.org/review/239
Reviewed-by: Evan Huus <eapache@gmail.com>
capture interfaces dialog code, *and* the code that calls it, under
HAVE_LIBPCAP.
Still more stuff to remove from the no-pcap UI, such as the Capture
menu, the capture filter in the main window, and the list of interfaces
in the main window.
svn path=/trunk/; revision=53582
* Reuse sparkline from welcome
* Split settings in tab (!= GTK)
* No all feature work (Work In Progress...)
* ...
Comments (and review) are welcome !
svn path=/trunk/; revision=53563
It looks like resetting the packet list model during freezing and
thawing disconnects the selection changed signal between the model and
the main window. Rename the packet list's setMenusFollowStream signal to
packetSelectionChanged and use it to trigger menu updates in the main
window.
svn path=/trunk/; revision=53516
I may eventually switch this to use proto_* values instead of strings, but just the addition of the loop is more jarring as compared to the simple comparing of ip or ethernet values. But it should lead to a smaller (less protocol specific) packet_info structure.
svn path=/trunk/; revision=53476
Create a new dialog each time the user follows a stream. A lot of the
follow code seems to assume one and only one dialog so there are likely
outstanding bugs.
Don't use the global cfile (should we deprecate its usage?). We want to
move closer to multiple documents, not further away.
Clean up after ourselves. Free our payload list and unlink our temp
file. Make a bunch of gchar*s QStrings. Make sure our destructor gets
called and use it.
Make member variable and method names more consistent.
svn path=/trunk/; revision=53306
In the current Qt startup sequence the main window + splash screen is
displayed before the main preferences are loaded which means we can't
immediately apply the correct geometry. For now, use an animation to
morph from the default to the saved geometry after the prefs are loaded.
Get rid of main_do_quit() (Qt) and main_window_exit() (Qt+GTK). It looks
like they were unused.
Add wsApp->isInitialized() and use it to see if we should exit() when
the main window is closed. Otherwise we won't shut the application down
and clean up properly.
svn path=/trunk/; revision=52988
time in order to fill in their respective context menus. R52386 broke
that. Fix it and add comments about handling reparenting. Fixes bug
9265.
svn path=/trunk/; revision=52600
Move the declaration of set_last_open_dir() to ui/util.h. It still
has separate GTK+ and Qt implemenations. We might want to move it to
ui/util.c at some point. Remove a lot of unnecessary GTK+ includes.
Remove most of the references to the global cfile while we're at it.
svn path=/trunk/; revision=52542
Make extra_split_ a member variable again. Make it and master_split_
full-on values. Set various parent/child relationships at startup
so that each widget is associated with a layout (which appears to be
the actual fix).
Make the throttled startup delay huge so that it's easier to browse
using GammaRay.
[1] https://github.com/KDAB/GammaRay
svn path=/trunk/; revision=52386
follow_stream_dialog.cpp. Remove the ones that we don't use. Use
QMessageBox in place of simple_dialog.
Move IP6OPT_HOME_ADDRESS and related definitions to packet-ipv6.c. It
looks like we only use it there and it conflicts with WinPcap.
Mark some items unused.
svn path=/trunk/; revision=51951
Add TCP/UDP/SSL Follow feature to QtShark
Known issue :
* Duplicate code with GTK (function need follow_info_t struct but in GTK there is some GWidget variable in struct)
* Sometimes TCP Follow fail...
svn path=/trunk/; revision=51883
QWidget::setWindowModified: The window title does not contain a '[*]' placeholder
a) Add [*] to the window title.
b) Also set the window title before calling setWindowModified
Not really understanding what I'm doing here, just following the hints
given in http://qt-project.org/forums/viewthread/2108
Original logmessages when closing Wireshark while running a capture.
17:23:39.652 Capture Msg Capture stopped!
17:23:39.653 Main Dbg Callback: capture update finished
QWidget::setWindowModified: The window title does not contain a '[*]' placeholder
FIX: packet list heading menu sensitivity
17:23:39.653 Dbg FIX: capture_info_ui_destroy
17:23:39.653 Main Dbg Callback: Closing
FIX: packet list heading menu sensitivity
17:23:39.655 Main Dbg Callback: Closed
svn path=/trunk/; revision=51722
splitters they're actually layed out in. This should let us reorganize the
splitters at will (when the prefs change) without reconstructing the panes.
svn path=/trunk/; revision=51718
panes, not yet which data goes in which pane).
You currently have to restart for the change to take effect. I also had to move
the preferences-reading (and thus the epan_init) call to before the main window
instantiation so that the preference was actually available for use. This means
that the progress-bar doesn't show up for very long any more, since most of the
work is already done by the time it appears.
I'm sure there is a way to delay just the layout setup until later, but I kept
getting slot errors I couldn't figure out...
svn path=/trunk/; revision=51647
deletes the interface list, which in turn kills off the dumpcap process
it may be running. This should hopefully keep us from leaving dumpcap
processes running in the background on Windows. (Am I the only one
running QtShark on that platform?)
svn path=/trunk/; revision=51485
Add CaptureFilterCombo and CaptureFilterEdit classes, similar to their
display filter counterparts. Add a CaptureFilterSyntaxWorker class which
runs a syntax check in a background thread similar to the threaded code
in capture_dlg.c. Add a bunch of related signal and slot plumbing. Other
minor fixups.
svn path=/trunk/; revision=51200
actionEditConfigurationProfiles. This keeps it from being converted to
the default preferences item on OS X.
Remove a hack where we stored the text for
actionEditConfigurationProfiles in its iconText in order to keep it from
clobbering actionEditPreferences. It doesn't seem to be necessary.
svn path=/trunk/; revision=50636
Add Summary Statistics to qtshark (Statistics => Summary)
Now, use tabs to split summary display (File Capture details, Capture Statistics)
Add also Comment Summary tab (to replace Statistics => Comments Summary)
From me :
Fix order of summary files in Qtshark.pro
svn path=/trunk/; revision=50470
When trying to close the QtShark application during its initialization process
(by hitting the "close" button), the processes "qtshark.exe" and "dumpcap.exe" don't terminate properly
The patch contains fix to:
1. QtShark doesn't quit properly after closing the main window during initialization
2. User is not prompted to save the capture to file when user chooses to exit
the program during capturing.
3. Bug exists in function MainWindow::testCaptureFileClose(bool from_quit, QString &before_what),
which prevent it from behaving correctly when from_quit == true.
svn path=/trunk/; revision=49454
Detail about this issue :
Bug is reproduced when accessing Preferences Dialog before QtShark start-up is finished,
specifically before preferences loading is completed which comes very late in the initialization process.
Fix from Richard Turner :
Patch to fix problems arising from users interacting with main interface before initialization is complete
Introduced a new slot function in main window for the locking of features before
init complete and for the unlocking of features after all systems good to go.
svn path=/trunk/; revision=49453
at least on OS X, to set the "proxy icon" - we need to clear the window
title *and* the file path before we set it, otherwise the set doesn't
happen.
While we're at it, clear the file path whenever we're *not* using a
path. For temporary files, don't set the file path.
The file path is, in fact, the *full path*, not just the last component.
svn path=/trunk/; revision=48715
indicates. (Note: "unsaved data" is more than just "unsaved changes";
it could also mean "temporary file that hasn't been saved anywhere".)
svn path=/trunk/; revision=48709
a save can be done ("can" in the sense of "there's something to
save" and in the sense of "we can write that something out");
a "save as" can be done (in the sense of "we can write what we
have out");
there's unsaved data to save (which might be unsaved changes or
might be a temporary file full of packets);
and use them as appropriate. This means that the "unsaved data"
indicator in the UI will be turned on for temporary files full of
packets as well as for files with unsaved changes; that's what we want.
svn path=/trunk/; revision=48693
it affects more than just the file name, it also affects whatever "you
have unsaved changes" indicator the UI provides.
Put a comment in the Qt code as a reminder of how to set the "you have
unsaved changes" indicator.
svn path=/trunk/; revision=48680
Add comments noting that
- We might want to do something different when the bookmark button is
pressed.
- The display filters (dfilters file) and gui.filter_expressions
preferences should be merged.
- Many buttons on Qt4 + OS X + unifiedTitleAndToolBarOnMac makes the
main window really wide.
Add a qstring_strdup convenience routine. Add "disabled" display filter
edit icons. Fix up whitespace and descriptions in a couple of places.
svn path=/trunk/; revision=47522
more clearly indicate that it's a copy of a preference value rather than
something we've saved in the preferences file. Update
prefs_pref_to_str() to handle default, stashed, and current prefs.
Create ui/preference_utils.[ch] and move some common routines there. Use
prefs_pref_type_name() in the GTK+ preferences dialog.
Make the "OK" button in the Qt preferences dialog work. We simply write
the prefs and redissect on "OK" and do nothing on "Cancel". This is
intentionally different from the Apply/OK/Cancel behavior in the GTK+
version.
Add a general "emitAppSignal" method to wsApp and use it for packet
dissection and preference changes.
Suggest that we might want to create a WsString class to make conversion
between QStrings, gchar *s, and GStrings easier.
svn path=/trunk/; revision=47139
ui/gtk/profile_dialog.c. Use the correct profile list in
profile_dialog.c so that deletion works.
Add a profile dialog to the Qt port. For some reason it crashes when
changing configuration profiles, which might be related to bug 7722.
Move the Qt configuration profile initialization from main.cpp to
wireshark_application.cpp. Make sure QMenuBar doesn't grab the
configuration profiles action on OS X. Add more role color names to
tango_colors.h.
svn path=/trunk/; revision=46834
when we detect a remote connection). Use it for the "go to" and search
frames. Properly detect remote connections in the splash overlay.
svn path=/trunk/; revision=46591
actually doing and what users are likely to want to do. Rename the
search enum values and functions to reflect what we're actually doing
and add a comment explaining why making searches more correct might make
searching worse. Add a search bar to the Qt main window, thus
continuing the War On Gratuitous Dialogs.
Clear out any previous temporary label stack items before adding a new one.
svn path=/trunk/; revision=46541
"Analyze→Prepare a Filter". Add a context menu to the protocol tree and
fill in the items we've implemented so far.
Add an "applyAllPreferences" method and corresponding
"preferencesUpdated" signal to wsApp. Use it to set the maximum display
filter combo count.
Move the packet filtering code from the display filter edit to the main
window (which makes more sense and matches what we're doing in the GTK+
version and gets rid of more global cfile references). Try to center the
display filter edit button images.
Use a different "close" button in the main toolbar. It looks better but
is still wrong (on OS X at least).
svn path=/trunk/; revision=46434
filter widget there. Add a few more items to the main toolbar. Note that
Qt 4.8 doesn't support a unified title+toolbar with multiple toolbar
rows on OS X (at least not easily) but Qt 5 might.
Disable icons-in-menus on OS X.
svn path=/trunk/; revision=46371
Allow multiple interface selections. Make sure we update the packet list
properly in a couple of places.
Use the right callback+signal to update capture statistics in the status
bar. Remove the global cfile from the main_statusbar.cpp
Add the version to the main window.
svn path=/trunk/; revision=46350
byte view.
Move the packet_char_enc enum from packet.h to frame_data.h. Make the
encoding flag a packet_char_enc and make it one bit.
Get rid of the "cfile" global in a few places. C++-ize some of the font
code. Clean up some variable names.
svn path=/trunk/; revision=45838
Implement DICOM, HTTP, and SMB object exports. Rename the GTK+ export
files. C++-ize epan/tap.h. Fix an apparent memory leak in
eo_save_all_clicked_cb.
The Qt dialog has an indeterminate progress bar. I tried adding
something similar to the GTK+ dialog but event processing led down a
rabbit hole.
svn path=/trunk/; revision=45647
Use it in the new "Export Packet Dissections" dialog.
I'm omitting PostScript exports on purpose. If you *really* need that
feature you can probably get better results than we produce using text +
enscript or print-to-PDF + pdf2ps/pdftops or PSML/PDML + XSL + ...
The Windows code is untested. I'll check in any needed fixes shortly.
svn path=/trunk/; revision=45513
Packets". Not yet tested on Windows. "Ignore Packet" hasn't been
implemented so we can't test that either.
Create a SyntaxLineEdit widget from the QLineEdit code in
DisplayFilterEdit. Use it in the file import and export dialogs and the
PacketRangeGroupBox widget. This lets us provide instant feedback
instead of popping up an error dialog.
Expand the Tango color list based on
http://emilis.info/other/extended_tango .
Rearrange QtShark.pro to (hopefully) work better with Qt Creator.
svn path=/trunk/; revision=45405
Replace the original file set code with a UI form. Use more consistent
file names. List the files using a QTreeWidget instead of a grid.
fileset_is_file_in_set is only used in fileset.c so make it static.
In main_window.cpp reduce our usage of the global cfile variable.
svn path=/trunk/; revision=45243
The GTK+ and native Win32 versions are slightly different. The GTK+
version lets you select an output file type and the Win32 version uses
the existing capture filetype. We do the latter for now.
Start documenting significant UI changes in README.qt. This might be
better handled on the wiki.
svn path=/trunk/; revision=44797
The moc man page says "The moc does not expand #include or #define,
it simply skips any preprocessor directives it encounters." This means
our signals and slots have to exist everywhere, even if they're empty
on some platforms.
Remove some duplicate definitions.
svn path=/trunk/; revision=44716
Implement basic capture start and stop. Add a lot of menu items and
enable and disable them when appropriate. Rename a few variables.
Next step: Let the user select an interface (we just use the default for
now).
svn path=/trunk/; revision=44714
so that we can properly associate a widget with create, update, and
destroy events. Only used by Qt so far but it should be easy enough to
add to GTK+.
Rename ui/qt/progress_dialog.{h,cpp} to progress_bar.{h,cpp}. Show a
progress bar in the status bar of the main window instead of creating
a separate dialog. Note that we still need to add a "cancel" mechanism
and display the task and item titles somewhere.
Thus began the War Against Gratuitous Dialogs.
svn path=/trunk/; revision=43833
the default extension for the file type iff
the file type we're using has a list of extensions;
the file has no extension or it has one but it's not one of the
ones in the list.
*Don't* expect a file extension to be at most 5 characters plus the dot
- the extension for pcap-ng, our default capture file type, is "pcapng",
and that's 6 characters!
svn path=/trunk/; revision=42800
The goal is only to translate the Gui (Not dissector)
Actually, there is only a french translation.
To try, (if you are not French) launch qtshark with LANG=fr ./qtshark (in ui/qt folder)
Missing some feature :
* Add preference to select (force) your language
* Some Gui Text, it no available for translation
* Documentation about how to translate (Coming soon...)
* Your translation !
svn path=/trunk/; revision=41389
to a MainStatusBar. Add a "LabelStack" widget, which MainStatusBar uses
to duplicate features in GtkStatusbar. Make the protocol tree a
full-blown ProtoTree widget. Move main_cf_callback from main to
WiresharkApplication. Duplicate a lot of the cf callbacks as signals and
slots. Use Q_UNUSED in a few places.
svn path=/trunk/; revision=40488