This sets the scope of the static build option to Wireshark support
libraries only.
Before the patch:
Static plugins don't work with CMake and autotools.
autotools static build is broken, and most likely will always be, as
building Wireshark all-static is difficult and time-consuming.
After the patch:
For CMake Wireshark will be built with static or shared libraries and
dynamic plugins. Everything just works. CMake apparently doesn't want
you building static and shared libraries at the same time.
For autotools Wireshark will be built with shared libraries by default.
--disable-shared and --enable-static options work as usual. Dlopened
plugins are not built if --disable-shared is given to configure (to
disable shared libraries). This is a limitations imposed by libtool.
Tested on Linux. This removes broken support for building plugins
statically.
Change-Id: Ib8e8176976f136eea93a2ce8f9857b6cf9bec64c
Reviewed-on: https://code.wireshark.org/review/24241
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Dead weight. If this feature is wanted getprotobynumber()
should be called once on startup.
Change-Id: I0358bacdc60466f676fa1aab7f4b7c9e588d8d74
Reviewed-on: https://code.wireshark.org/review/24045
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Set NTDDI_VERSION and _WIN32_WINNT to their Vista values so that
ws2tcpip.h will define inet_pton and inet_ntop. Remove the associated
compiler version checks so that everyone is on the same page.
Add breadcrumbs to the various parts of the code where we set a minimum
Windows version.
Change-Id: I83bba5fa1024bfbc02e07b120412807ad259e291
Reviewed-on: https://code.wireshark.org/review/24080
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
If we're building on Windows we're going to have windows.h and
winsock2.h. Don't bother checking for them.
Change-Id: I0004c44d7364ab3f41682f34b8c84cd8617c9603
Reviewed-on: https://code.wireshark.org/review/24068
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Should be available on every platform we support.
Change-Id: Ib65d78e351d22d581b427e5e93fc8d5e5348b260
Reviewed-on: https://code.wireshark.org/review/24047
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Including where it says not to in comments. Use IPv4 dotted-decimal
notation.
Change-Id: Iafe1f6fbd2bd5867c41642dc27411f47dff8ce6a
Reviewed-on: https://code.wireshark.org/review/24044
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Only plugins built for the same feature release (X.Y) are assured binary
compatibility. Make sure we don't try to run unsuitable code and, if so,
warn the user. This might happen for example if the user manually copies
a binary plugin to the wrong folder, intentionally or by accident.
I'm using "release version" to loosely mean not a patch release
(i.e: a feature release).
Change-Id: I896e9cbbd2d3843623fff6af8ef51002ec06f1f8
Reviewed-on: https://code.wireshark.org/review/23807
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
The Wireshark User Guide seems to say:
Global lua plugins are in $pkglibdir/plugins
Personal lua plugins are in XDG_CONFIG_HOME/plugins
Global binary plugins are in $pkglibdir/plugins/$version
Personal binary plugins are in XDG_CONFIG_HOME/plugins/$version
Fix code to match that. This is a backward-incompatible change
for global lua plugins and personal binary plugins.
Adds a version subfolder to the personal plugin folder for binary plugins.
This allows for safe upgrades and side-by-side installations
with different prefixes (they no longer use the same personal dir).
Change-Id: Ie0f039113628a257625a9a9fb2cb30e532f5dd47
Reviewed-on: https://code.wireshark.org/review/23516
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
For a sane plugin build environment. Include config.h as the first
header in the .c file instead.
Fix by moving required compiler attribute macros to a new
"ws_attributes.h" API header.
Change-Id: I34f58a927f68c1a0e59686c14d214825149749e1
Reviewed-on: https://code.wireshark.org/review/23400
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
pcap provides a pcap_set_tstamp_type function, which can be used to request
hardware timestamps from a supporting kernel.
This patch adds support for aforementioned function as well as two new
command line options to dumpcap, wireshark and tshark:
--list-time-stamp-types
List time stamp types supported for the interface
--time-stamp-type <type>
Change the interface's timestamp method
Name choice mimics those used by tcpdump(1), which already supports this
feature. However, unlike tcpdump, we provide both options unconditionally.
If Wireshark was configured without pcap_set_tstamp_type being available,
--list-time-stamp-types reports an empty list.
Change-Id: I418a4b2b84cb01949cd262aad0ad8427f5ac0652
Signed-off-by: Ahmad Fatoum <ahmad.fatoum@siemens.com>
Reviewed-on: https://code.wireshark.org/review/23113
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This reverts commit 8cd1fd0c99.
Making HAVE_REMOTE a config.h #define is a really horrible idea. It's *NOT* a configuration option.
Instead, HAVE_REMOTE should be defined by other mechanisms, as was done in 79eab8ca07.
Change-Id: I4632b63bd73a25a27c5f4686d2baf3e0beddecb3
Reviewed-on: https://code.wireshark.org/review/21604
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit d13b8ea13c.
This will only work with git HEAD of libpcap, but not with any release versions of libpcap or winpcap (the *pcap includes require the define, not Wireshark).
Change-Id: I08e5ec66e3642dc02f793c83ffc4363bb348202c
Reviewed-on: https://code.wireshark.org/review/21603
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
We never test for it - we test for HAVE_PCAP_REMOTE - so there's no need
to set it in config.h.
While we're at it, note that "PCAP" in "HAVE_PCAP_REMOTE" can refer to
libpcap as well as WinPcap, given that, at least in the tip of the
master branch, you can configure remote support in libpcap, although
it's not enabled by default (it needs to be vetted for security, as it
increases the attack surface of a machine running the server *and* of an
application using libpcap with remote support).
Change-Id: I3c96cf16bbda19ec7c085f74cffc6f125198d45b
Reviewed-on: https://code.wireshark.org/review/21589
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This can be used by dissectors that need to parse out-of-band
configuration.
Change-Id: I13c0a2f408fb5c21bad7ab3d7971e0fa8ed7d783
Reviewed-on: https://code.wireshark.org/review/20912
Reviewed-by: Roland Knall <rknall@gmail.com>
This solves a crash occurring when trying to free memory allocated by
GeoIP (cross-compiled with mingw(32|64)) with MSVC function
Bug: 13598
Change-Id: I757cff13660bd485d7ea91d10660e9bf86404728
Reviewed-on: https://code.wireshark.org/review/21090
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Avoid anachronisms, however; there was no "macOS 10.0" or even "OS X
10.0", for example. It was "Mac OS X" until 10.8 (although 10.7 was
sometimes called "OS X" and sometimes called "Mac OS X"), and it was "OS
X" from 10.8 to 10.11.
Change-Id: Ie4a848997dcc6c45c2245c1fb84ec526032375c3
Reviewed-on: https://code.wireshark.org/review/20933
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Removed all guards for HAVE_LIBGCRYPT, change autotools and CMake to
error out if it is not available. Update release notes, developer
documentation and README with the new status. Clarify relation with
GnuTLS in macosx-setup.sh. Install Libgcrypt via brew script.
Motivation for this change is that many dissectors depend on Libgcrypt
and having it optional increases the maintenance burden (there have been
several compile issues in the past due to the optional status).
Furthermore, wsutil has crypto code that can be replaced by Libgcrypt.
Change-Id: Idf0021b8c4cd5db70b8766f7dcc2a8b3acbf042f
Link: https://www.wireshark.org/lists/wireshark-dev/201702/msg00011.html
Reviewed-on: https://code.wireshark.org/review/20030
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Many capitalization can be found for this library (spandsp, Spandsp, SpanDSP),
let's use the one found in the library README and in its spec file.
Change-Id: Ia66b723e5d582a6218da1b6366b7d4859272f80c
Reviewed-on: https://code.wireshark.org/review/19122
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Integrate the Spandsp library for G.722 and G.726 support. Adds support
for G.722 and all eight variants of G.726.
Note: this also fixes a crash in Qt (buffer overrun, reading too much
data) caused by confusion of the larger output buffer (resample_buff)
with the smaller input buffer (decode_buff). It was not triggered before
because the sample rate was always 8k, but with the addition of the new
codecs, a different sample rate became possible (16k).
Fix also a crash which occurs when the RTP_STREAM_DEBUG macro is enabled
and the VOIP Calls dialog is opened (the begin frame, start_fd, is not
yet known and therfore a NULL dereference could occur).
Passes testing (plays normally without bad RTP timing errors) with
SampleCaptures files: sip-rtp-g722.pcap and sip-rtp-g726.pcap. Tested
with cmake (Qt), autotools (Qt and GTK+) with ASAN enabled.
Bug: 5619
Change-Id: I5661908d193927bba50901079119eeff0c04991f
Reviewed-on: https://code.wireshark.org/review/18939
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
AC_CHECK_MEMBER() and AC_CHECK_MEMBERS() use a standard name for the
{structurename} being the name of the structure type, complete with
"struct" if a typedef wasn't used, and with all letters mapped to upper
case, and with {membername} being the name of the structure member, with
all letters mapped to upper case.
check_struct_has_member() lets you choose the name; choose the same name
that the autoconf macros use, and fix the code to check for them.
Change-Id: Ifb3cf65e7e94907ad0a2f8aacca0c21a531f0c5b
Reviewed-on: https://code.wireshark.org/review/18382
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That's the time the file's inode last changed, so size changes,
permission changes, etc. affect it. It's *not* the time the file was
created; most UN*Xes don't provide that. Newer versions of FreeBSD,
NetBSD, OpenBSD, and macOS do, but other UN*Xes don't appear to.
On Windows, at least according to Microsoft's documentation, st_ctime
*is* the creation time. Hopefully that's not the result of confusion on
the part of somebody at Microsoft.
Change-Id: I20743703f6ef66e40dff9004dc91bed46af6fad0
Reviewed-on: https://code.wireshark.org/review/18378
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We do not use the STARTUP negotiation since a stream
can be captured in its middle but try to decompress
if the flag is present and fallback if it fails.
Change-Id: Iecbf49a45220b04be7808869c9884548eb1e7694
Signed-off-by: Benoît Canet <benoit@scylladb.com>
Reviewed-on: https://code.wireshark.org/review/17952
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Ping-Bug: 10203
Change-Id: Ifa24870d711449b87e9839dd46af614e4aa28fde
Reviewed-on: https://code.wireshark.org/review/15608
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
Since Ie5e670b769eb0674950f3679ef511047641c2873 we no longer support
synchronous name resolution.
Change-Id: Icc65bd665bd610d89f894549e77608cfb5ef4c53
Reviewed-on: https://code.wireshark.org/review/15165
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove HTML_VIEWER compile-time setting.
If xdg-open doesn't exist use user web browser preference as fallback.
Change-Id: I3b4a4a1a36b0192d75f2c97595f37d0d88a0941e
Reviewed-on: https://code.wireshark.org/review/14805
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Having to define two macros for marking a function as never returning
seems a bit redundant. Merge the MSVC and GCC-like attributes into a
single WS_NORETURN.
Tested with Clang 3.7.1, GCC 4.4.7 and even GCC 4.1.2 using this small
program (-Wall -Wextra, the first two generate warnings for
uninitialized variables, the last one compiles without warnings):
#include <stdlib.h>
__attribute__((noreturn)) void foo() { exit(1); }
__attribute__((noreturn)) void bar();
void bar() { exit(1); }
int main() {
int j, i;
if (i) { bar(); return j; }
foo();
return j;
}
Change-Id: I7d19c15e61b8f8fa4936864407199c4109f8cc82
Reviewed-on: https://code.wireshark.org/review/14822
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Set ENABLE_CHECK_FILTER to 1 for get list of display filter with conflict...
Ping-Bug:2402
Change-Id: I8d56b1573120d1a29d437aae1088be242e15e9a3
Reviewed-on: https://code.wireshark.org/review/13644
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
This new function abstracts the creation of a list of the local
interfaces that will be used by future extcaps to generate specific
filters. Sshdump now uses it to create a pcap filter.
Change-Id: I5b75a266f81104b3c9bcb3e51de246b7cc8785ce
Reviewed-on: https://code.wireshark.org/review/14092
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Add dumpcap support for configuring 80MHz, 80+80MHz, 160MHz monitor
modes via nl80211.
Change-Id: I2ae8955670c2a9b5051e2223d45ce522459f2c5f
Reviewed-on: https://code.wireshark.org/review/13964
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
It's an ancient obsolete option with a confusing name.
Change-Id: Ib10330cf859cdea18fed2077c6539e56350ef380
Reviewed-on: https://code.wireshark.org/review/11967
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
sshdump is an extcap module that allows dumping from a remote host using an ssh connection.
It goes with the existing extcap plugin interface.
Change-Id: I8987614fdd817b8173a50130812bc643a4833bca
Reviewed-on: https://code.wireshark.org/review/11402
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
A build with the gold linker broke with:
run/libwireshark.so.0.0.0: error: undefined reference to 'krb5_c_decrypt'
Fix this my restructuring the FindKERBEROS module to use the libraries
found by pkg-config.
While at it, check for MIT and Heimdal instead of assuming MIT. Remove
HAVE_KEYTYPE_ARCFOUR_56 as this macro is not used.
Change-Id: Iab23d79bc3f25e9c0fd7203b6f050f875fb4a2b5
Reviewed-on: https://code.wireshark.org/review/10907
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Note the "initial". This is woefully incomplete. See the "to do" lists
below and in the code.
This differs a bit from the GTK+ version in that you specify one or more
streams to be decoded.
Instead of showing waveforms in individual widgets, add them all to a
single QCustomPlot. This conserves screen real estate and lets us more
easily take advantage of the QCP API. It also looks better IMHO.
Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We
probably won't use the widgets until we make 5.0 our minimum Qt
version and plain old QtMultimedia lets us support Qt 4 more easily
(in theory at least).
Add resampling code from libspeex. I initially used this to resample
each packet to match the preferred rate of our output device, but this
resulted in poorer audio quality than expected. Leave it in and use to
create visual samples for QCP and to match rates any time the rate
changes. The latter is currently untested.
Add some debugging macros.
Note that both the RTP player and RTP analysis dialogs decode audio data
using different code.
Note that voip_calls_packet and voip_calls_init_tap appear to be dead
code.
To do:
- Add silence frames where needed.
- Implement the jitter buffer.
- Implement the playback timing controls.
- Tapping / scanning streams might be too slow.
Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4
Bug: 9007
Reviewed-on: https://code.wireshark.org/review/10458
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
João Valverde