With Wireshark 2.0, some dissector preferences were removed in favor of 'Decode As' functionality.
But the settings saved in the GUI are not loaded in tshark, preventing their use without an explicit call to '-d' option.
Let's load decode_as_entries file by default and have it overridden by the '-d' option if required.
Ping-Bug: 12124
Change-Id: I134a424cb6cf8fc89b7096a659ef1605314a70a2
Reviewed-on: https://code.wireshark.org/review/13956
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Remove mostly obsolete aclocal macros. Make GTK build flags a strict superset
of GLib flags. Use GTK build variables for GTK GUI and GLib elsewhere. Add
dependency flags explicitly instead of using WS_CPPFLAGS.
Some minor improvements and fixes for missing/unnecessary variables (no impact
on our test builds).
Change-Id: I3e1f067a875f79d6516c1fa7af986f17a7a6b671
Reviewed-on: https://code.wireshark.org/review/14005
Reviewed-by: João Valverde <j@v6e.pt>
Replace hacky code to set install dirs in config.h and use path definitions
only where required.
Change-Id: I78735f730725382c1b3aca876705e5e6e1872d78
Reviewed-on: https://code.wireshark.org/review/14033
Reviewed-by: João Valverde <j@v6e.pt>
Some only allow buffer overruns (read), others also buffer overflows
(write).
Found by looking for '\[ *N *\]' where N is 255, 0xff, 15 and 0xf (case
insensitive).
Change-Id: I250687e2fdeb8fbd5eaf0bbb8251c3dab9640760
Reviewed-on: https://code.wireshark.org/review/14034
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
After switching to QPushButton for buttons in SearchFrame and GoToFrame
the widgets needs a maximum size to reduce the height of the frame.
Change-Id: I504e65add446c4262e9b1e02ff3e41c08d1cfdfd
Reviewed-on: https://code.wireshark.org/review/14019
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Do showProtocolPreferences before removing the variable which
this depends on. The button does not work without at module.
Change-Id: I7d31aa5ab19340a4102523b13de961e799cae5e4
Reviewed-on: https://code.wireshark.org/review/14015
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
- Use QPushButton for buttons and set the "Find" button as default
in SearchFrame.
- Use QPushButton for buttons, added a "Packet:" label, and set
the "Go to packet" button as default in GoToFrame.
- Set Qt::WA_MacSmallSize in OS X for FilterExpressionFrame and
PreferenceEditorFrame.
- Removed QFrame::StyledPanel and QFrame::Raised from ColumnEditorFrame.
- Update ui files to reflect that AccordionFrame is used for
AddressEditorFrame, FilterExpressionFrame and PreferenceEditorFrame.
Change-Id: Icfbfff973535317997109a1020dfe24ba932e098
Reviewed-on: https://code.wireshark.org/review/13995
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
If you include something from the wiretap directory, always precede it
with wiretap/.
Fix some includes of files in the top-level directory to use a path
relative to the current directory, not relative to the wiretap
directory.
This makes it a bit clearer what's being included.
Change-Id: Ib99655a13c6006cf6c3112e9d4db6f47df9aff54
Reviewed-on: https://code.wireshark.org/review/13990
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add support for using regular expressions in the Search Frame
when searching in packet list, packet details and packet bytes.
This search is in many cases faster than plain string search.
Change-Id: I2d8a709046f90d7b278fb39547fc4e2e420623bc
Reviewed-on: https://code.wireshark.org/review/13981
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The argument to the resize method for QByteArray is an int, not a
size_t.
Change-Id: Id30bc03daec6d6ead8669794b5cb0247718be66b
Reviewed-on: https://code.wireshark.org/review/13977
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add an option to decode the packet bytes from base64 or zlib compressed.
Also add configurable start byte and end byte to make it possible to
decode a subset of bytes. It's also possible to select a range in ASCII
view and select "Show selected" from the context menu to make a subset.
In ASCII view a null terminator is replaced by UTF8 symbol for NULL,
and a CR is replaced by UTF8 symbol for carriage return. This is done
to make it possible to "Show selected" from the context menu.
Change-Id: Ie03c9912c304c121af6ca9e998a6e8445b5382c5
Reviewed-on: https://code.wireshark.org/review/13958
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
'const gpointer' is the same as 'void *const'. Replace with gconstpointer
where straightforward (assuming that was the intent) and use gpointer everywhere
else for clarity (that does not change *API* constness contract; it just means
a variable is not declared immutable inside the called funtion).
Change-Id: Iad2ef13205bfb4ff0056b2bce056353b58942267
Reviewed-on: https://code.wireshark.org/review/13945
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add settings to the QLineEdit context menu to use textual or regular
expression search. Use this in Follow Stream and Show Packet Bytes.
Change-Id: I3a9f5a923f616629aa40a334921871f98b518f30
Reviewed-on: https://code.wireshark.org/review/13942
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Show frame number, field name (abbrev) and number of bytes.
Added some translations.
Change-Id: I9777d43d63a52fcdb221864bad097a9604522d3a
Reviewed-on: https://code.wireshark.org/review/13888
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Preferences are only allowed to contain lowercase ASCII letters,
numbers, underscores or dot characters. Create a utility function
to convert an extcap setting to its equivalent preference key and
use it wherever conversion from setting to preference key is needed.
Bug: 12064
Change-Id: I39bbac7de5f0f905bd41c54257fa997a3b32442d
Reviewed-on: https://code.wireshark.org/review/13687
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Small bugs were introduced when copy/pasting the code from GTK UI:
- arrive_offset is stored in seconds and not milliseconds
- some tests regarding the current playback mode were wrong
Change-Id: I21fb82ba8ff6c8defa7df90c815c040e9e074aaa
Reviewed-on: https://code.wireshark.org/review/13885
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Put some extra spaces between hex and text output in follow stream
hex dump to align with the layout used in ByteViewText.
Change-Id: Ie2743ccf46a8941595580878955e96b9ada56de9
Reviewed-on: https://code.wireshark.org/review/13867
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
It returns FALSE, not TRUE, on failure.
Bug: 12101
Change-Id: I2fb4f407d2040e7b84f17af197de81555d64c647
Reviewed-on: https://code.wireshark.org/review/13857
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The retina fixes in gb10bad1 and gb3f3d66 were incomplete and caused
rendering problems in our axis labels. Handle the device pixel ratio in
a couple of more places so that our axis rects are correctly sized.
Add a switch (WS_ENABLE_DP_RATIO) to make it easy to turn scaling on and
off.
Change-Id: I633d94d633e0743be2a607c9a4cbb3409e9eed62
Ping-Bug: 11710
Reviewed-on: https://code.wireshark.org/review/13834
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
SequenceDiagram implements time, address, and comment labels using
QCPAxis::setTickVector and QCPAxis::setTickVectorLabels. It also calls
QCPAxis::setTicks(false) so that we don't draw tick marks. It appears
that doing so also disables the labels themselves in our current version
of QCP. Set the tick pen to Qt::NoPen instead.
Only draw node lines where we have nodes.
Add notes about a retina issue and the need for zooming.
Bug: 11710
Change-Id: I88c30a1ddcd29832f86b1ca8c018c7fa6b6d64a7
Reviewed-on: https://code.wireshark.org/review/13781
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Show selected packet bytes as ASCII, HTML, Image, ISO 8859-1, Raw or UTF-8.
Images supported are what's supported by QImage, and HTML supported
is what's supported by QTextEdit.
Change-Id: I96fc5c5d222c5389078576463cf78d82cf55528d
Reviewed-on: https://code.wireshark.org/review/13807
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
This reverts commit 13ec77a9fc.
This commit introduces a segmentation fault for Lua code (uncovered by the test suite).
Change-Id: Ibc273d1915cda9632697b9f138f0ae104d3fb65e
Reviewed-on: https://code.wireshark.org/review/13813
Reviewed-by: João Valverde <j@v6e.pt>
Try to improve 'address' API (to be easier/safer) and also avoid
some constness warnings by not overloading the 'data' pointer to
store malloc'ed buffers (use private pointer for that instead).
Change-Id: I7456516b12c67620ceadac447907c12f5905bd49
Reviewed-on: https://code.wireshark.org/review/13463
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
The proto tree is needed in several cases when using Lua field extractors,
because they fetch values from the tree. Without a valid field extractor
a Lua plugin may misbehave and display wrong column info.
This fixes column issues when:
- Calling resetColumns() in Qt. This involves adding a display filter,
change time display format, change name resolution and other changes
in UI which requires column updates.
- Print summary lines.
- Export as CSV and PSML.
Change-Id: Ieed6f8578cdf2759f1f836cd8413a4529b7bbd80
Reviewed-on: https://code.wireshark.org/review/13708
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When changing timestamp format, timestamp precision and display seconds
with hours and minutes we must reset columns before auto resizing the
time columns to get the size of the new column values.
Without this we will resize to the length of the preference we are
changing from, which is not what we want.
Change-Id: If7081bf0b9b6f6974232cea0b3fe0186c904f2a2
Reviewed-on: https://code.wireshark.org/review/13711
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
get_dirname may return NULL instead of the original string, so avoid
patterns like get_dirname(strdup(x)). Writing to
cf_path.toUtf8().data() is fine btw, toUtf8() returns new memory.
This fixes two memleak reported by LeakSanitizer via fileset_add_dir and
MainWindow::captureFileReadFinished (both via cf_callback_invoke).
Change-Id: I0f1528763e77e1f55b54b6674c890a9d02302ee8
Reviewed-on: https://code.wireshark.org/review/13691
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
De Morganize an expression.
Clear the selection at start. Selecting the first item (104apci) seems
to confuse people.
Change-Id: I8fcd1f068f1801042a2658940175b46bdfb2b462
Reviewed-on: https://code.wireshark.org/review/13647
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Also add check to has_configuration
Change-Id: Ia0ffbd3bf68ad51c26bc75b5ee179db179e22bd4
Reviewed-on: https://code.wireshark.org/review/13635
Reviewed-by: Roland Knall <rknall@gmail.com>
This patch creates the functionality of saving all parameters
for extcap devices in the general preference section.
For now, multiselect and fileselect do not save their values
but patches for this will be provided in the future
Also, all preferences are stored as strings to make handling
easier. This might change in the future, but for the first version
it will stick.
Restore to Defaults is not implemented as of yet, and will be
in a future version, once the preference storing is finalized
Bug: 11666
Change-Id: I178346405146d2e43f4f3481c05c92c0b3595af5
Reviewed-on: https://code.wireshark.org/review/13451
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
From the comments in qlibrary_win.cpp:
// We make the following attempts at locating the library:
[ ... ]
// Windows
// if (absolute)
// fileName
// fileName + ".dll"
// else
// fileName + ".dll"
// fileName
We were passing "riched20.dll" to QLibrary, which meant that it searched
for "riched20.dll.dll" first.
Switch to ws_load_library, which we use elsewhere and which has much
safer default behavior.
Change-Id: Ic8f0cf5686c9b1856d37e76be4404d6236c076e5
Reviewed-on: https://code.wireshark.org/review/13607
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Separate the capture and display filter bookmark icons. Make the capture
icon green to match(-ish) the active capture icon. Tested on nice+new
and janky+old displays.
Change-Id: I6ed532c8a49da50fe2a7de3d8fbd0b1af7623b4a
Reviewed-on: https://code.wireshark.org/review/13612
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Michael Mann