PEP 394[1] says,
"In cases where the script is expected to be executed outside virtual
environments, developers will need to be aware of the following
discrepancies across platforms and installation methods:
* Older Linux distributions will provide a python command that refers
to Python 2, and will likely not provide a python2 command.
* Some newer Linux distributions will provide a python command that
refers to Python 3.
* Some Linux distributions will not provide a python command at all by
default, but will provide a python3 command by default."
Debian has forced the issue by choosing the third option[2]:
"NOTE: Debian testing (bullseye) has removed the "python" package and
the '/usr/bin/python' symlink due to the deprecation of Python 2."
Switch our shebang from "#!/usr/bin/env python" to "#!/usr/bin/env
python3" in some places. Remove some 2/3 version checks if we know we're
running under Python 3. Remove the "coding: utf-8" in a bunch of places
since that's the default in Python 3.
[1]https://www.python.org/dev/peps/pep-0394/#for-python-script-publishers
[2]https://wiki.debian.org/Python
Add support for TK user input keys. With this Wireshark can
decrypt packet captures where 4WHS frames are missing and
packet captures with non-supported AKMS, for example
802.11r / Fast BSS Transitioning.
Decryption using user TK works as a backup if the normal
decryption flow does not succeed. Having TK decryption keys
added will affect general IEEE 802.11 dissector performance
as each encrypted packet will be tested with every TK.
Worst case scenario is plenty of TKs where none of them
matches encrypted frames.
On successful user TK decryption an SA is formed based on
parameters used to decrypt the frame. This SA is similar to
what is formed when Wireshark detects and derive keys from
4WHS messages. With the SA entry in place the decryption
performance (success case) should be on par with "normal"
decryption flow.
Bug: 16579
Change-Id: I72c2c1e2c6693131d3ba07f8ddb8ff772c1b54a9
Reviewed-on: https://code.wireshark.org/review/37217
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Run Wireshark tests on macOS only if SECURITYSESSIONID. If this isn't
reliable enough we might be able to get away with running a small UI
utility, e.g. `pbpaste > /dev/null`.
Change-Id: Ieccb87bcc1312f02c22ec2905a80437bf136d964
Reviewed-on: https://code.wireshark.org/review/36195
Reviewed-by: Gerald Combs <gerald@wireshark.org>
dpauxmon relies on libnl that is linux specific. Skip the test
for other platforms.
Fix skip message while here.
Change-Id: I744d83d0a56e41e1c32e45ade8ca0d9dd29876e1
Reviewed-on: https://code.wireshark.org/review/35525
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
For some reason the wireshark GUI tests hang on the Travis OS X builds,
but I could not reproduce it locally. It turns out than an error dialog
was present, but I could not know that without the screenshot.
Change-Id: Idf897d33b4fddf3c19c69ebcea60b629f1ca9368
Reviewed-on: https://code.wireshark.org/review/31682
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Avoid pinging www.wireshark.org, this removes an external dependency.
Instead send small UDP datagrams to UDP port 9 (discard) every 50ms.
Enable this for all platforms (including macOS and Linux) by default.
On Windows the tests requires Npcap and will be skipped with WinPcap.
Remove the --capture-interface option since it is no longer needed.
Copy WSDG Wireshark Tests Quick Start to README.test and add a link.
Change-Id: Id4105a6b1e95407ebf69b871c785c68f9ae26368
Reviewed-on: https://code.wireshark.org/review/31677
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This will enable four tests in case_wireshark_capture on Linux, two of
them require --capture-interface to be specified.
To enable headless mode, QT_QPA_PLATFORM=minimal is set. Unfortunately
this option causes a null pointer dereference crash on macOS and it also
fails on Windows (cause not investigated). So limit it to Linux for now.
Change-Id: Id05364571b2c9da38434e611d92642a1177700df
Reviewed-on: https://code.wireshark.org/review/31664
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Building only a subset of programs is not a very common situation, it is
more likely that some feature was accidentally disabled. For that
reason, fail tests by default unless a program is explicitly permitted
to be missing.
The '-v' test is now dropped from the Travis tests, the sole reason of
adding it was to see which tests got (accidentally) skipped.
Change-Id: I725f4508541d8ed980e17d69fb7aee1ad2875d73
Reviewed-on: https://code.wireshark.org/review/31660
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Avoid the need to set `pytest --program-path` in the common case.
Change-Id: I3b237e47eee741decb62a74b733110040aa26673
Reviewed-on: https://code.wireshark.org/review/31348
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for loading RSA private key files from PKCS #11 tokens,
identified by PKCS #11 URIs. Add a new 'pkcs11_libs' UAT which can
dynamically load PKCS #11 provider libraries that are not found by
p11-kit.
The configuration GUI will need additional code to discover available
PKCS #11 tokens and will be added later.
This feature requires GnuTLS 3.4 with PKCS #11 support, so Windows,
macOS via Homebrew, Ubuntu 16.04, Debian Stretch. Not supported: RHEL7.
Currently macOS via official packages disables PKCS #11 support, so that
will also not work.
Change-Id: I20646bfd69c6bd13c8c2d27cb65c164a4b0b7a66
Reviewed-on: https://code.wireshark.org/review/30855
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Check for potential Unicode-related problems on Windows.
Change-Id: I147c07749c5073a9ae00f07914dd80347d17c40f
Ping-Bug: 15118
Reviewed-on: https://code.wireshark.org/review/31154
Tested-by: Petri Dish Buildbot
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
GnuTLS is an optional dependency, allow tests to run without it.
Change-Id: Ib1bd7beaf1d885a157a0e1a630ccc4fbc8786af1
Reviewed-on: https://code.wireshark.org/review/30839
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a new option to insert decryption secrets into a pcapng file.
Change-Id: I0e024585cac9a8a328e88d32f9eb03d37d350e2a
Ping-Bug: 15252
Reviewed-on: https://code.wireshark.org/review/30693
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Convert the old start_pinging routine to use pytest fixtures, rewriting
it to enable a different generator that uses (for example) UDP.
Remove the config module since it is no longer neded.
Change-Id: Ic4727157faab084b41144e8f16ea44f59c9037d8
Reviewed-on: https://code.wireshark.org/review/30659
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add a new --capture-interface option to pytest, similar to test.py. It
will grab some Ethernet interface on Windows. An empty value overrides
this and disables capture tests. Remove the test.py --enable-capture
option since that is implied by the --capture-interface option.
Port the `test.py --program-path` option to pytest and additionally make
the pytest look in the current working directory if neither WS_BIN_PATH
nor --program-path are specified. Drop config.setProgramPath, this
allows tests to be run even if not all binaries are available.
With all capture tests converted to fixtures, it is now possible to run
tests when Wireshark is not built with libpcap as tests that depend on
cmd_dumpcap (or capture_interface) will be skipped.
Bug: 14949
Change-Id: Ie802c07904936de4cd30a4c68b6a5139e6680fbd
Reviewed-on: https://code.wireshark.org/review/30656
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Stop using subprocesstest, drop the (now redundant) DFTestCase base
class and use pytest-style fixtures to inject the dependency on tshark.
This approach makes it easier to switch to pytest in the future.
Most substitutions were automated, so no typos should be present.
Change-Id: I3516029162f87423816937410ff63507ff82e96f
Reviewed-on: https://code.wireshark.org/review/30649
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Create a special custom profile just for the nameres tests, instead of
doing this for all tests. Other tests do not need it.
Change-Id: I41de0ece9dcf1ee310957beab2bbee0a99784753
Reviewed-on: https://code.wireshark.org/review/30633
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Inline all capture file names and use fixtures instead of the global
config object. This makes dependencies more explicit.
Change-Id: I37a6eda73822735b5a6957b44bce53bb5ecd1aa0
Reviewed-on: https://code.wireshark.org/review/30631
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Continue the conversion from use of globals (the config module) to
fixtures. If a program (like wmem_test or tshark) is unavailable, it
will be skipped now rather than failing the test.
The general conversion pattern is:
- Decorate each class with `@fixtures.uses_fixtures` and (for tests that
run tshark) `@fixtures.mark_usefixtures('test_env')`.
- Convert all `config.cmd_*` to `cmd_*` and add an argument.
- Convert all `config.*_dir` to `dirs.*_dir` and add an argument.
- Convert users of `os.path.join(dirs.capture_file, ...)` to use a new
'capture_file' fixture to reduce boilerplate code. Inline variables if
possible (this conversion was done in an automated way using regexes).
Some other changes: tests that do not require a test environment (like
wmem_test) will use 'base_env' which avoids copying config files,
`env=config.test_env` got removed since this is the default. Some test
classes in suite_clopts were combined. Removed unused imports.
Change-Id: Id5480ffaee7d8d56cf2cb3189a38ae9afa7605a1
Reviewed-on: https://code.wireshark.org/review/30591
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Currently all binaries must be available or no tests will be executed.
This is inconvenient if you just want to test a single binary (e.g.
text2pcap) without having to build epan. The problem is essentially that
tests lack dependency annotations.
To solve this problem, add the required dependencies as parameters to
each test (so-called 'fixtures' in pytest). Skip a test if a binary
(such as tshark) is unavailable. As a demonstration, suite_dissection.py
is converted. Over time, tests should no longer depend on config.py due
to explicit dependencies fixtures (listed in fixtures_ws.py).
Since the unittest module does not support such dependency injections,
create a small glue for use with pytest and an (incomplete) emulation
layer for use with test.py.
Tested with pytest 3.8.2 + Python 3.7.0 and pytest 3.0.3 + Python 3.4.3.
Python 2.7 is not supported and will fail. Test commands:
~/wireshark/test/test.py -p ~/build/run
WS_BIN_PATH=~/build/run pytest ~/wireshark/test -ra
Change-Id: I6dc8c28f5c8b7bbc8f4c04838e9bf085cd22eb0b
Ping-Bug: 14949
Reviewed-on: https://code.wireshark.org/review/30220
Tested-by: Petri Dish Buildbot
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Gerald Combs