more display filters for X.25;
no LCN in X.25 RESTART / DIAGNOSTIC / REGISTRATION packets;
support for nettl file format (nettl is a trace tool for HP-UX).
For now, it only supports traces for X.25 interfaces (tested
with HP-UX 10.20).
svn path=/trunk/; revision=879
for ip.ip_p and ip6.ip6_nxt (and other IPv6 header chain).
use val_to_str() as much as possible in dissect_{ipv6,pim,ripng}().
make --disable-zlib a default for netbsd (temporary workaround).
svn path=/trunk/; revision=827
parser/lexical analyzer in question are needed only in the ".c" files
for the generated parser and lexical analyzer, and Flex and Byacc/Bison
put them there; don't bother putting them in a header file, just
directly declare the functions with the right names.
svn path=/trunk/; revision=801
file (which could be WTAP_ENCAP_UNKNOWN, if we couldn't determine it, or
WTAP_ENCAP_PER_PACKET, if we could determine the encapsulation of
packets in the file, but they didn't all have the same encapsulation).
This may be useful in the future, if we allow files to be saved in
different capture file formats - we'd have to specify, when creating the
capture file, the per-file encapsulation, for those formats that don't
support per-packet encapsulations (we wouldn't be able to save a
multi-encapsulation capture in those formats).
Make the code to read "iptrace" files set the per-file packet
encapsulation - set it to the type of the first packet seen, and, if any
subsequent packets have a different encapsulation, set it to
WTAP_ENCAP_PER_PACKET.
svn path=/trunk/; revision=772
Assign a range of Wiretap errors for zlib errors, and have
"wtap_strerror()" use "zError()" to get an error message for
them.
Have the internal "file_error()" routine return 0 for no error
and a Wiretap error code for an error.
svn path=/trunk/; revision=769
Sniffer trace, and printout therefrom, sent to me by Jeff Foster. (The
Sniffer manuals I'd had a chance to read didn't say what the units
were.)
svn path=/trunk/; revision=744
same (which raises the question "so why the heck are there two types?" -
note that the way you're supposed to tell Ethernet from 802.3 packets is
by looking at the value of the type/length field; both of them can be
transmitted on the same wire), so we'll treat them the same.
svn path=/trunk/; revision=733
"zlib" was built in FreeBSD 3.2 (and possibly other 4.4-Lite-derived
BSDs), if HAVE_UNISTD_H is defined before "zlib.h" is included, the
declaration of "gzseek()" in "zlib.h" expands to something that doesn't
match what's in the OS's "zlib".
svn path=/trunk/; revision=721
The "fh" member of a "wtap" structure points to something constructed
from the "fd" member of that structure, so that closing the stream
referred to by "fh" also closes the underlying file descriptor; get rid
of an unnecessary close of "wth->fd".
svn path=/trunk/; revision=720
not, so it's OK to use "zlib" to read capture files, as it handles
uncompressed files correctly.
When *writing* capture files, however, we can't detect automatically
whether the user wanted to write the file out as a compressed file or
not, so we should *NOT* use "zlib" until we add a flag to the API
specifying whether to write the file out as a compressed file or not.
Furthermore, the code in Ethereal that implements the "-S" flag depends
on being able to get the "FILE *" for a capture file being written, so
that it can "fflush()" it.
svn path=/trunk/; revision=703
bounce bar for compressed file support). Note that the progress bar may
not grow smoothly for compressed files, but it should be reasonably accurate
for files which are large enough to matter.
svn path=/trunk/; revision=701
gzip. The zLib library is used for this purpose. If zLib is not available
(or it's use is disabled by the --disable-zlib option to configure), you
can still compile Ethereal but it will be unable to read compressed capture
files.
IMPORTANT:
Now all file accesses to capture files should be done through special macros.
Specifically, for any use of the following functions on capture files, replace them.
The arguments for the right-side functions are exactly the same as for the
original stdio functions.
fopen file_open
fdopen filed_open
fread file_read
fwrite file_write
fseek file_seek
fclose file_close
ferror file_error
svn path=/trunk/; revision=695
not like #preprocessor_macros that do not start at
the first column.
So write:
#ifdef FOO
# include <dummy1.h>
# define DUMMY 1
#else
# include <dummy2.h>
# define DUMMY 2
#endif
instead of
#ifdef FOO
#include <dummy1.h>
#define DUMMY 1
#else
#include <dummy2.h>
#define DUMMY 2
#endif
svn path=/trunk/; revision=668
family has a set of debug commands that allow you to log the traffic on a
WAN or dialup connection as text, e.g.
RECV-iguana:241:(task: B04E12C0, time: 1975358.50) 15 octets @ 8003D634
[0000]: FF 03 00 3D C0 06 C9 96 2D 04 C1 72 00 05 B8
Created wtap_seek_read() which parses the textual data for and Ascend
trace, and does a normal fseek() and fread() for any other file type.
The fseek()/fread() pairs in file.c were replaced with the new function.
svn path=/trunk/; revision=652
this causes "Makefile.in" to have two GPL notices - "Makefile.in" and
the "Makefile" generated from it are generated files, so maybe that's
OK).
svn path=/trunk/; revision=639
don't seek around it - some implementations of the standard I/O library
routines (e.g., the ones in Solaris 2.5.1, at least) appear not to be
clever enough to handle seeks that occur within the buffer by moving the
current buffer position; instead, they do a seek on the underlying file
descriptor *and* appear to throw out the buffer, forcing them to do
another read.
Instead, read it into a buffer.
svn path=/trunk/; revision=626
header fields we don't look at - some implementations of the standard
I/O library routines (e.g., the ones in Solaris 2.5.1, at least) appear
not to be clever enough to handle seeks that occur within the buffer by
moving the current buffer position; instead, they do a seek on the
underlying file descriptor *and* appear to throw out the buffer, forcing
them to do another read.
Instead, read the entire record header into a structure, and pick the
relevant bits out of it.
Also, skip over the FCS in LAPB captures by reading it rather than
seeking around it (should we put it in the pseudo-header?).
svn path=/trunk/; revision=625
Use "pletohs()" and "pletohl()" to access 16-bit and 32-bit fields in
the file and packet headers, as those fields are little-endian.
svn path=/trunk/; revision=612
read, and maintain it ourselves as we read through the file, rather than
calling "ftell()" for every packet we read - "ftell()" may involve an
"lseek()" call, which could add a noticeable CPU overhead when reading a
large file.
svn path=/trunk/; revision=596
"FDDI with the MAC addresses bit-swapped"; whether the MAC addresses are
bit-swapped is a property of the machine on which the capture was taken,
not of the machine on which the capture is being read - right now, none
of the capture file formats we read indicate whether FDDI MAC addresses
are bit-swapped, but this does let us treat non-"libpcap" captures as
being bit-swapped or not bit-swapped independent of the machine on which
they're being read (and of the machine on which they were captured, but
I have the impression they're bit-swapped on most platforms), and allows
us to, if, as, and when we implement packet capture in Wiretap, mark
packets in a capture file written in Wiretap-native format based on the
machine on which they are captured (assuming the rule "Ultrix, Alpha,
and BSD/OS are the only platforms that don't bit-swap", or some other
compile-time rule, gets the right answer, or that some platform has
drivers that can tell us whether the addresses are bit-swapped).
(NOTE: if, for any of the capture file formats used only on one
platform, FDDI MAC addresses aren't bit-swapped, the code to read that
capture file format should be fixed to flag them as not bit-swapped.)
Use the encapsulation type to decide whether to bit-swap addresses in
"dissect_fddi()".
svn path=/trunk/; revision=557
Have the code that opens "libpcap" files for writing check to make sure
that the Wiretap encapsulation can be written to a "libpcap" file, and
return -1 and supply a new WTAP_ERR_UNSUPPORTED_ENCAP error code if it
can't.
Handle that new error code in "wtap_strerror()".
svn path=/trunk/; revision=546
code supplied by a Wiretap routine (whether a positive UNIX "errno" code
or a negative Wiretap error code), and returns an error message
corresponding to it.
Use that to construct the message Ethereal put up in a message box for
those errors for which we don't have Ethereal put up a message of its
choice.
svn path=/trunk/; revision=545
Get rid of WTAP_ENCAP_NONE; replace it with WTAP_ENCAP_UNKNOWN, which
means "I can't handle that file, it's using an encapsulation I don't
support".
Check for encapsulations we don't support, and return an error (as is
already done in "libpcap.c").
Check for too-large packet sizes, and return an error (as is already
done in "libpcap.c").
Print unsigned quantities in Wiretap messages with "%u", not "%d".
svn path=/trunk/; revision=544
and in different capture files; throw in some heuristics to try to
figure out whether the 4-byte header is:
1) PPP-over-HDLC (some version of ISDN4BSD?);
2) big-endian AF_ value (BSD on big-endian platforms);
3) little-endian AF_ value (BSD on little-endian platforms);
4) two octets of 0 followed by an Ethernet type (Linux, at least
on little-endian platforms, as mutated by "libpcap").
Make a separate Wiretap encapsulation type, WTAP_ENCAP_NULL,
corresponding to DLT_NULL.
Have the PPP code dissect the frame if it's PPP-over-HDLC, and have
"ethertype()" dissect the Ethernet type and the rest of the packet if
it's a Linux-style header; dissect it ourselves only if it's an AF_
value.
Have Wiretap impose a maximum packet size of 65535 bytes, so that it
fails more gracefully when handed a corrupt "libpcap" capture file
(other capture file formats with more than a 16-bit capture length
field, if any, will have that check added later), and put that size in
"wtap.h" and have Ethereal use it as its notion of a maximum packet
size.
Have Ethereal put up a "this file appears to be damaged or corrupt"
message box if Wiretap returns a WTAP_ERR_BAD_RECORD error when opening
or reading a capture file.
Include loopback interfaces in the list of interfaces offered by the
"Capture" dialog box, but put them at the end of the list so that it
doesn't default to a loopback interface unless there are no other
interfaces. Also, don't require that an interface in the list have an
IP address associated with it, and only put one entry in the list for a
given interface (SIOCGIFCONF returns one entry per interface *address*,
not per *interface* - and even if you were to use only IP addresses, an
interface could conceivably have more than one IP address).
Exclusively use Wiretap encapsulation types internally, even when
capturing; don't use DLT_ types.
svn path=/trunk/; revision=540
Guy Harris