If a macro identifier is not defined it evaluates to zero in an
expression, so the outer #ifdef is unnecessary and should be
avoided (the less the better).
Add a missing CMake comment while here.
* introduced with 9b13c4352d
* HAVE_SMI_VERSION_STRING is always defined if libsmi found
Change-Id: I50480d37a3a6f31bcfe768f030af9176213b7366
Signed-off-by: Toni Uhlig <matzeton@googlemail.com>
This header was installed incorrectly to epan/wmem_scopes.h.
Instead of creating additional installation rules for a single
header in a subfolder (kept for backward compatibility) just
rename the standard "epan/wmem/wmem.h" include to
"epan/wmem_scopes.h" and fix the documentation.
Now the header is installed *correctly* to epan/wmem_scopes.h.
This allows wmem to be used from other libraries, namely wsutil.
It is often the case that a funtion exists in wsutil and cannot
be used with a wmem scope, requiring some code duplication or
extra memory allocations, or vice-versa, code in epan cannot be
moved to wsutil because it has a wmem dependency.
To this end wmem is moved to wsutil. Scope management remains part
of epan because those scope semantics are specific to dissection.
"User" sounds as if the blocks belong to the user; at most, the current
user might have modified them directly, but they might also have, for
example, run a Lua script that, unknown to them, modified comments.
Also, a file might have "user comments" added by a previous user, who
them wrote the file and and provided it to the current user.
"Modified" seems a bit clearer than "changed".
Mostly functioning proof of concept for #14329. This work is intended to
allow Wireshark to support multiple packet comments per packet.
Uses and expands upon the `wtap_block` API in `wiretap/wtap_opttypes.h`.
It attaches a `wtap_block` structure to `wtap_rec` in place of its
current `opt_comment` and `packet_verdict` members to hold OPT_COMMENT
and OPT_PKT_VERDICT option values.
Dependending on version_info is unnecessary and forces an epan
rebuild every time the git commit id changes, which can be slow,
especially with LTO enabled, and again is unnecessary.
Printing the VCS version to the TLS debug log is a minor convenience
that doesn't justify the cost to relink epan with every commit.
Experience has shown that:
1. The current logging methods are not very reliable or practical.
A logging bitmask makes little sense as the user-facing interface (who
would want debug but not crtical messages for example?); it's
computer-friendly and user-unfriendly. More importantly the console
log level preference is initialized too late in the startup process
to be used for the logging subsystem and that fact raises a number
of annoying and hard-to-fix usability issues.
2. Coding around G_MESSAGES_DEBUG to comply with our log level mask
and not clobber the user's settings or not create unexpected log misses
is unworkable and generally follows the principle of most surprise.
The fact that G_MESSAGES_DEBUG="all" can leak to other programs using
GLib is also annoying.
3. The non-structured GLib logging API is very opinionated and lacks
configurability beyond replacing the log handler.
4. Windows GUI has some special code to attach to a console,
but it would be nice to abstract away the rest under a single
interface.
5. Using this logger seems to be noticeably faster.
Deprecate the console log level preference and extend our API to
implement a log handler in wsutil/wslog.h to provide easy-to-use,
flexible and dependable logging during all execution phases.
Log levels have a hierarchy, from most verbose to least verbose
(debug to error). When a given level is set everything above that
is also enabled.
The log level can be set with an environment variable or a command
line option (parsed as soon as possible but still later than the
environment). The default log level is "message".
Dissector logging is not included because it is not clear what log
domain they should use. An explosion to thousands of domains is
not desirable and putting everything in a single domain is probably
too coarse and noisy. For now I think it makes sense to let them do
their own thing using g_log_default_handler() and continue using the
G_MESSAGES_DEBUG mechanism with specific domains for each individual
dissector.
In the future a mechanism may be added to selectively enable these
domains at runtime while trying to avoid the problems introduced
by G_MESSAGES_DEBUG.
Instead *_register_plugin() is turned into a noop (with a warning).
The test suit is failing with ENABLE_PLUGINS=Off (it was already failing
before and this patch didn't affect that).
Closes#17202.
The decode_as_list is built at startup and contains all protocols
registered for "decode as". Do not clear this list on profile change,
only on exit.
Bug: 16635
Change-Id: I832a042327603ae0f01b10ab620fccc03d4fd3a3
Reviewed-on: https://code.wireshark.org/review/37579
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Although c-ares support was techically optional, it was either on by
default or required in all of our packaging. Go ahead and require it
globally. C-ares is widely available and synchronous name resolution can
easily result in a horrific user experience.
Change-Id: Id67c797316ed6b8a0ab5052e55a43a1b9e2a2464
Reviewed-on: https://code.wireshark.org/review/35188
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
For the same reason as in g89c9d909.
Change-Id: I5e344ebdf8ba05d169484aa32b409d84edc6124f
Reviewed-on: https://code.wireshark.org/review/34943
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
These environment variables are read very frequently, read them once to
globals for performance improvment.
Change-Id: I4f05a5edca85b370674cc5f85fce40bd1af695cb
Reviewed-on: https://code.wireshark.org/review/34449
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
tap_register_plugin() is not sufficient for an extension language
implementation because the epan plugin is initialized before
proto_init(), therefore before dissectors have registered taps.
Change-Id: Ief213f85ff4f7182f9af985e5f45476355cc2b86
Reviewed-on: https://code.wireshark.org/review/34048
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
The loop to remove all matching callbacks was skipping every second
entry which would give some leaks when reloading Lua plugins.
Add funnel_cleanup() to be called in epan_cleanup() at shutdown
to remove all allocated menu entries.
Change-Id: I3a50ba2070c8675fee1385f25e9e109db57c2dc5
Reviewed-on: https://code.wireshark.org/review/31769
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Proto objects were only freed while reloading Lua plugins, be sure to
release these on program exit too. Fix missing deallocation of heur_list
(matches per-protocol cleanup in proto_cleanup_base).
Be sure to keep a reference to the "Pref" object after registering it to
a Proto, otherwise it could be garbage-collected early, resulting in
memleaks (because the preference was still in use).
Fixes a lot of memory leaks reported by ASAN for tests, ten tests were
affected by Proto_new leaks, four were affected by the new_pref leaks.
Change-Id: Ica52718849a33eda614775f533dc0fcefec9cc74
Reviewed-on: https://code.wireshark.org/review/31746
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add support for loading RSA private key files from PKCS #11 tokens,
identified by PKCS #11 URIs. Add a new 'pkcs11_libs' UAT which can
dynamically load PKCS #11 provider libraries that are not found by
p11-kit.
The configuration GUI will need additional code to discover available
PKCS #11 tokens and will be added later.
This feature requires GnuTLS 3.4 with PKCS #11 support, so Windows,
macOS via Homebrew, Ubuntu 16.04, Debian Stretch. Not supported: RHEL7.
Currently macOS via official packages disables PKCS #11 support, so that
will also not work.
Change-Id: I20646bfd69c6bd13c8c2d27cb65c164a4b0b7a66
Reviewed-on: https://code.wireshark.org/review/30855
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add a new secrets API to the core, one that can outlive the lifetime of
a single capture file. Expose decryption secrets from wiretap through a
callback and let the secrets API route it to a dissector.
Bug: 15252
Change-Id: Ie2f1867bdfd265bad11fc58f1e8d8e7295c0d1e7
Reviewed-on: https://code.wireshark.org/review/30705
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the ability to specify maximum function counts for each group to
checkAPIs. Add maximum counts for the "termoutput" and "abort" groups
where needed. Show summaries in various checkAPI targets.
Switch uses of ws_g_warning back to plain g_warning.
Change-Id: I5cbddc8c671729e424eed8551f69116d16491976
Reviewed-on: https://code.wireshark.org/review/29721
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
We are exporting a registration function from libwireshark just
to have it passed back as a callback. Seems unnecessary.
Change-Id: I7621005c9be11691d319102326824c5e3520a6f3
Reviewed-on: https://code.wireshark.org/review/29328
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Put routine to free all dynamically registered header fields in the
UAT reset callback to avoid ASAN report for memory leaks on exit.
Handle duplicated entries without leaking memory.
Call proto_free_deregistered_fields() in proto_cleanup() and move
this after prefs_cleanup() to free the memory used in UATs.
Change-Id: I96545177b5b23b9c20ad8e7751a0d5621c9ca10f
Reviewed-on: https://code.wireshark.org/review/27907
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Our convention is to pass a pointer to a static structure as argument
to *_register_plugin(). Don't try to free it.
Change-Id: I16d81b72faf298ebfb3dccf4c9d4772291fd8cf0
Reviewed-on: https://code.wireshark.org/review/27748
Reviewed-by: João Valverde <j@v6e.pt>
We need to ignore SIGPIPE whenever we use maxmind_db. Do so in
epan_init.
Ping-Bug: 14494
Change-Id: I4372935e371a94c02a79050d59b2e3ee1ba04fee
Reviewed-on: https://code.wireshark.org/review/26369
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
MaxMind is discontinuing its legacy databases in April in favor of
GeoIP2, which use a newer database format (MaxMind DB). The reference C
library (libmaxminddb) is available under the Apache 2.0 license which
isn't quite compatible with ours.
Add mmdbresolve, a utility that reads IPv4 and IPv6 addresses on stdin
and prints resolved information on stdout. Place it under a liberal
license (MIT) so that we can keep libmaxminddb at arm's length. Add
epan/maxmind_db.[ch], which spawns mmdbresolve and communicates with it
via stdio.
Migrate the preferences and documentation to MaxMindDB.
Change the IPv4 and IPv6 asnum fields to FT_UINT32s. Change the
geographic coordinate fields to FT_DOUBLEs.
Bug: 10658
Change-Id: I24aeed637bea1b41d173270bda413af230f4425f
Reviewed-on: https://code.wireshark.org/review/26214
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Separate the stuff that any record could have from the stuff that only
particular record types have; put the latter into a union, and put all
that into a wtap_rec structure.
Add some record-type checks as necessary.
Change-Id: Id6b3486858f826fce4b096c59231f463e44bfaa2
Reviewed-on: https://code.wireshark.org/review/25696
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make plugins.c the source of truth for plugin names. Where plugins
reside and what they do are two different things, so split the plugin
directory and description into two separate elements.
CMake creates portable[1] builds on Windows and macOS. That is, the
build-time directory layout is the same as the installation directory
layout. Adjust various plugin paths macOS accordingly.
[1] You have to run osx-app.sh on macOS to prepare the application
bundle, but the goal is to create a directory/bundle that can be moved
or copied to a different system and run in the new location.
Change-Id: Icf9d02e61918fdf1404468baf52542910edf2743
Reviewed-on: https://code.wireshark.org/review/25166
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
CentOS 6 ships with glib 2.28.8 which do not support
g_ptr_array_new_full (make-taps/make-dissectors) and need to link with
wsutil for glib-compat.
g_thread_new was only introduced with GLib 2.32 (not 2.31), so adjust
the check accordingly. Abort in case thread creation fails (as
documented). Properly initialize threads or it will abort on runtime
(this also requires linking epan with gthreads in CMake, autotools
already includes it with GLIB_LIBS).
Change-Id: Ie81d6df7b3b26aaa4eb25e23719a220755e2c13c
Reviewed-on: https://code.wireshark.org/review/24978
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Allow epan itself to be extended by plugins. Adds the following new plugin
interfaces:
void plugin_epan_init()
void plugin_epan_dissect_init(epan_dissect_t *)
void plugin_epan_dissect_cleanup(epan_dissect_t *)
void plugin_epan_cleanup()
void plugin_epan_register_all_protocols(register_cb, gointer) [OPTIONAL]
void plugin_epan_register_all_handoffs(register_cb, gointer) [OPTIONAL]
Any one of these can be an empty function but the first four must be
present.
The motivation for the change is a better way to implement a language binding
other than registering a fake protocol and stuffing everything into a single
dissector call (and maybe require an extra packet_info field) but I expect
there would be other interesting use cases.
Change-Id: I215d50750ac7561fe25fdcdcfbc6a3f351984785
Reviewed-on: https://code.wireshark.org/review/24813
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Put different types of plugins (libwiretap, libwireshark) in different
subdirectories, give libwiretap and libwireshark init routines that
load the plugins, and have them scan the appropriate subdirectories
so that we don't even *try* to, for example, load libwireshark plugins
in programs that only use libwiretap.
Compiled plugins are stored in subfolders of the plugin folders, with
the subfolder name being the Wireshark minor version number (X.Y). There is
another hierarchical level for each Wireshark library (libwireshark, libwscodecs
and libwiretap).
The folder names are respectively plugins/X.Y/{epan,codecs,wiretap}.
Currently we only distribute "epan" (libwireshark) plugins.
Change-Id: I3438787a6f45820d64ba4ca91cbe3c8864708acb
Reviewed-on: https://code.wireshark.org/review/23983
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Have separate packet_provider_data structures and packet_provider_funcs
structures; the latter holds a table of functions that libwireshark can
call for information about packets, the latter holds the data that those
functions use.
This means we no longer need to expose the structure of an epan_t
outside epan/epan.c; get rid of epan/epan-int.h.
Change-Id: I381b88993aa19e55720ce02c42ad33738e3f51f4
Reviewed-on: https://code.wireshark.org/review/24732
Reviewed-by: Guy Harris <guy@alum.mit.edu>
libwireshark now expects an epan_t to be created with a pointer to a
"packet provider" structure; that structure is opaque within
libwireshark, and a pointer to it is passed to the callbacks that
provide interface names, interface, descriptions, user comments, and
packet time stamps, and that set user comments. The code that calls
epan_new() is expected to provide those callbacks, and to define the
structure, which can be used by the providers. If none of the callbacks
need that extra information, the "packet provider" structure can be
null.
Have a "file" packet provider for all the programs that provide packets
from a file.
Change-Id: I4b5709a3dd7b098ebd7d2a7d95bcdd7b5903c1a0
Reviewed-on: https://code.wireshark.org/review/24731
Reviewed-by: Guy Harris <guy@alum.mit.edu>