Original problem: run/radius/ (and other files) would continuously be
copied over because the "copy_directory" command is always invoked,
resulting in a newer timestamp (observable via rsync output).
Fix 1: convert from "copy_directory" to copying individual files
(matched via a glob pattern).
Fix 2: add DEPENDS information to the commands, ensuring that the
copy commands are only invoked when the file is actually newer.
(copy_if_different does not respect timestamp, so use plain copy.)
Other visible changes:
- radius/Custom.make (automake thingey) is not copied anymore because
an explicit list is used with glob patterns.
- Removed comment about "default.tt" (gone since
v1.99.0-rc1-1684-g07b003a, Makefile.nmake is still untouched though).
Due to fix 1, the number of processes increase by about 300. Due to fix
2 however, less processes are executed for repetitive runs. This is
visible in the following build time comparison:
patch/generator cmake build1 build2 clean
before/make 24.86 152.73 3.46 1.04
after/make 24.78 153.08 3.40 1.03
before/ninja 22.99 141.68 0.64 0.24
after/ninja 22.89 141.66 0.10 0.25
cmake is "cmake -DCMAKE_BUILD_TYPE=None -GNinja" (-G"Unix Makefiles");
build1 is invocation of "make -j10"/"ninja" on v2.1.0rc0-668-g94b9907;
build2 is the second invocation with this patch;
clean is "make clean" or "ninja clean".
Numbers are in seconds over 3 runs. This patch has no significant
performance impact for the first build, but the second run has improved
because the more efficient Ninja generator executes less processes.
Change-Id: I7b62556393520044aaaad17dafb82ac137ae73bb
Reviewed-on: https://code.wireshark.org/review/12028
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I14089fbdafa00280ff7b3148c2e0a880b925958e
Reviewed-on: https://code.wireshark.org/review/11872
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The path may contain a space (it does on my Windows 7 VM), so quote it
in the PowerShell command.
Change-Id: Ib130991b8c29cb327832f2fe51cb37828526448b
Reviewed-on: https://code.wireshark.org/review/12041
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The hardening check runs on all binaries and quite a few third party binaries
are not hardened, thus leading to a warning on the buildslave.
The change reduces the noise by not counting the binaries that are known to be
"soft". They are still printed in the output though, for reference.
Also fixed the search directory passed to the script.
Change-Id: I1619066c687c9ba934ab38fccbbf2011108328e4
Reviewed-on: https://code.wireshark.org/review/12016
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Graham Bloice <graham.bloice@trihedral.com>
sshdump is an extcap module that allows dumping from a remote host using an ssh connection.
It goes with the existing extcap plugin interface.
Change-Id: I8987614fdd817b8173a50130812bc643a4833bca
Reviewed-on: https://code.wireshark.org/review/11402
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
...otherwise we won't copy it to ${CMAKE_BINARY_DIR}/run/Wireshark.app on
OS X, which means our flag icons won't be displayed.
Bug: 11697
Change-Id: I26cd6a2dd13be35f9a80fd93adc8248848df5978
Reviewed-on: https://code.wireshark.org/review/11923
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Some compiler flags may not be passed twice (such as -mllvm
-msan-keep-going), so avoid duplicating CMAKE_C(XX)_FLAGS.
When -DCMAKE_BUILD_TYPE=<type> is set, you can override the default
optimization and debug flags with -DCMAKE_C_FLAGS_<type>=....
This reverts commit 15a238a28d.
Change-Id: I4e1cf11c49eaf00ad4a2c430454a127b4be20d9e
Reviewed-on: https://code.wireshark.org/review/11597
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The current version of the fix only adds -fPIC under certain
circumstances; we check whether it was added and, if it was, and those
circumstances are *not* in effect, we remove it.
Bug: 11643
Change-Id: I75d0ff9b4781d7d4cd884a29bbce7d392939315c
Reviewed-on: https://code.wireshark.org/review/11849
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This allows displaying the WinPcap version in about dialog
Change-Id: Ic3f4256d81db68314a158fc55682dfd9dbf799a0
Reviewed-on: https://code.wireshark.org/review/11726
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
This will allow other apps to use the random packet generation
features.
Change-Id: I7e9af58cbe39da4908242b5fbb292f473e03b4f2
Reviewed-on: https://code.wireshark.org/review/11579
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
It is no longer supported on El Capitan's clang, which was causing my
cmake/osx/qt build to fail with:
clang: error: optimization flag '-fno-delete-null-pointer-checks' is not
supported
Change-Id: Idfac336758cdea9a34446d8281cd237ad3ee6823
Reviewed-on: https://code.wireshark.org/review/11571
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
The version of CMake I use (3.2.2) failed to parse the
CMakeLists.txt
Change-Id: I146c5a5ba8cd6fa6236b53039a31cc085bf5b460
Reviewed-on: https://code.wireshark.org/review/11392
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
CMake sets CMAKE_CL_64 if we're using a 64-bit version of Visual Studio.
Use it.
Change-Id: I04595a0e703e39e428d853a506472f3881672a35
Reviewed-on: https://code.wireshark.org/review/11376
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Since v2.1.0rc0-17-g877fd03 and v2.0.0rc0-23-g263ff53 ("ssl-utils:
load RSA keys based on their modulus+exponent"), GnuTLS 2.12.0 is
needed.
Add a version check to cmake as well, tested on CentOS6 (with
pkg-config check disabled to verify the code path). Note that RHEL6
has GnuTLS 2.8.5 and thus SSL decryption with a RSA private key is no
longer supported on that version.
Change-Id: I99fdfe6790107f48629dd435794fe8880263063d
Reviewed-on: https://code.wireshark.org/review/11044
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Fixes building on Ubuntu 12.04 x86_64 which has cmake 2.8.7.
Bug: 11617
Change-Id: I253e9fda698d4b963d50516e483d8243231f056b
Reviewed-on: https://code.wireshark.org/review/11193
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
libgcrypt 1.4.2 is required since since v1.11.0-rc1-2787-g23f9100
("Really add support for AEAD ciphers (GCM)") due to the use of
gcry_cipher_setctr. Bump the version in configure.ac too.
Add version check for gcrypt to cmake. Tested with CentOS 6 (cmake
2.8.12.2, libgcrypt 1.4.5).
Change-Id: I93c3ed902a764d9d14675779e866230d073c96d5
Reviewed-on: https://code.wireshark.org/review/11043
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Or, at least, undo the unconditional addition of -fPIC to
Qt5Widgets_EXECUTABLE_COMPILE_FLAGS, and add it back only if we need it
to compile a small test program that includes <QtCore>.
-fPIC still shows up for other reasons; perhaps we need to undo other
unconditional operations "helpfully" done by Qt5CoreConfigExtras.cmake.
Change-Id: I76c1b01b3dce7398e4115552bc4ff87bc775e027
Reviewed-on: https://code.wireshark.org/review/11079
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add "/WX" to the Visual C++ compiler flags if DISABLE_WERROR is off,
similar to config.nmake.
We haven't compiled C++ code with -Wshorten-64-to-32 for quite
some time so there's no need to add -Wno-shorten-64-to-32 in
ui/qt/CMakeLists.txt.
Additionally, squelch
----
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3050) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3065) : see reference to function template instantiation 'void std::_Median<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3127) : see reference to function template instantiation 'std::pair<_RanIt,_RanIt> std::_Unguarded_partition<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3157) : see reference to function template instantiation 'void std::_Sort<_Iter,int,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Diff,_Pr)' being compiled
with
[
_Iter=QList<QString>::iterator
, _RanIt=QList<QString>::iterator
, _Diff=int
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
.\rpc_service_response_time_dialog.cpp(130) : see reference to function template instantiation 'void std::sort<QList<QString>::iterator,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3051) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3052) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3053) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
----
in both rpc_service_response_time_dialog.cpp and wireshark_application.cpp
so that we'll compile successfully.
Change-Id: I457bcede99dcb1f3c1001f1f559c4901bb000357
Reviewed-on: https://code.wireshark.org/review/10533
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Try to find Python and set PYTHON_EXECUTABLE on Windows via the registry
prior to calling FindPythonInterp. This works around a bug in CMake that
prefers Cygwin's Python, which is a symlink, which by default is a text
file that contains a Cygwin-specific cookie, which is therefore useless
outside of Cygwin.
This is avoids the need to pass -DPYTHON_EXECUTABLE=... to CMake.
Change-Id: Ife37221b61d920682c20357b6d139a93067a5ad1
Reviewed-on: https://code.wireshark.org/review/11071
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This reverts commit 222de975c4.
I realized how to do it with a compile test.
Change-Id: I9468c50777e387c572f60411ca39ea86ba6ce520
Reviewed-on: https://code.wireshark.org/review/11078
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit 6bdfa95a1e.
Next I'll revert my change, as I realized how I *can* do it with a compile test, instead.
Change-Id: I75335ef4522af23340fdc9e5d68634cb5a5835d8
Reviewed-on: https://code.wireshark.org/review/11077
Reviewed-by: Guy Harris <guy@alum.mit.edu>
There are other compilers that won't like it or even that may not like
it.
Change-Id: I0d50e4217994bc930914c0fbcf1c5d2fc18a0e3a
Reviewed-on: https://code.wireshark.org/review/11072
Reviewed-by: Guy Harris <guy@alum.mit.edu>
On Debian Wheezy, the cmake build would fail with:
/usr/bin/ld: CMakeFiles/wsutil.dir/privileges.c.o: relocation
R_X86_64_PC32 against symbol `started_with_special_privs' can not be
used when making a shared object; recompile with -fPIC
Issue was introduced with v1.99.10rc0-222-g3fb1d68 ("cmake: Enable PIE
when it is available by default").
Bug: 11587
Change-Id: I62eec8d1db020128eeeb77b38e3316abf71e6e6a
Reviewed-on: https://code.wireshark.org/review/10916
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
"argument unused during compilation" warnings suggest that some options
do not make sense (such as passing the -gsplit-dwarf option to the
linking command while it is only valid during compilation).
For now we do not care about these warnings, the option is accepted by
clang and whether it used in a particular step or not is uninteresting.
Change-Id: I3b6efa0dccd33c7f351c5938a29adef64ac1706d
Reviewed-on: https://code.wireshark.org/review/10893
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
A build with the gold linker broke with:
run/libwireshark.so.0.0.0: error: undefined reference to 'krb5_c_decrypt'
Fix this my restructuring the FindKERBEROS module to use the libraries
found by pkg-config.
While at it, check for MIT and Heimdal instead of assuming MIT. Remove
HAVE_KEYTYPE_ARCFOUR_56 as this macro is not used.
Change-Id: Iab23d79bc3f25e9c0fd7203b6f050f875fb4a2b5
Reviewed-on: https://code.wireshark.org/review/10907
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
I give up. I don't know whether this all means our build mechanism is
too fragile, our code is to fragile, autotools are too fragile, the
compilers we're using are too fragile, Qt is too fragile, or C++ is too
fragile, but if the build breaks that easily, maybe we should just give
up on Leopard.
Change-Id: If700d928da95d09ed5173b976261e4ddd236d654
Reviewed-on: https://code.wireshark.org/review/10946
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Try to figure out why CMake builds work on the 32-bit OS X buildbot but
autotools builds don't; either the compiler commands are different in
ways that break the autotools build, or the config.h files are different
in ways that break the autotools build, or magic pixies affect the
builds in different ways that only break the autotools build.
Change-Id: Id24bad04ff8ef755e4966e28fd445c2ab05c6913
Reviewed-on: https://code.wireshark.org/review/10931
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Remove variadic macros restriction (c99, c++11 feature) from
README.developer. GCC, Clang, MSVC 2005 all support it.
Enable -Wno-variadic-macros in configure.ac and CMakeLists.txt when
-Wpedantic is enabled (which would enable -Wvariadic-macros).
For all files matching 'define\s*\w+[0-9]\(', replace "FOO[0-9]" by
"FOO" and adjust the macro definition accordingly. The nbap dissector
was regenerated after adjusting its template and .cnf file. The
generated code is the same since all files disabled the debug macros.
Discussed at:
https://www.wireshark.org/lists/wireshark-dev/201209/msg00142.htmlhttps://www.wireshark.org/lists/wireshark-dev/201510/msg00012.html
Change-Id: I3b2e22487db817cbbaac774a592669a4f44314b2
Reviewed-on: https://code.wireshark.org/review/10781
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This doesn't appear to fix the issue unfortunately.
This reverts commit fd5eafa50a.
Change-Id: Ida25881fca0a667c7d47692465b8f1fc9d335697
Reviewed-on: https://code.wireshark.org/review/10753
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Note the "initial". This is woefully incomplete. See the "to do" lists
below and in the code.
This differs a bit from the GTK+ version in that you specify one or more
streams to be decoded.
Instead of showing waveforms in individual widgets, add them all to a
single QCustomPlot. This conserves screen real estate and lets us more
easily take advantage of the QCP API. It also looks better IMHO.
Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We
probably won't use the widgets until we make 5.0 our minimum Qt
version and plain old QtMultimedia lets us support Qt 4 more easily
(in theory at least).
Add resampling code from libspeex. I initially used this to resample
each packet to match the preferred rate of our output device, but this
resulted in poorer audio quality than expected. Leave it in and use to
create visual samples for QCP and to match rates any time the rate
changes. The latter is currently untested.
Add some debugging macros.
Note that both the RTP player and RTP analysis dialogs decode audio data
using different code.
Note that voip_calls_packet and voip_calls_init_tap appear to be dead
code.
To do:
- Add silence frames where needed.
- Implement the jitter buffer.
- Implement the playback timing controls.
- Tapping / scanning streams might be too slow.
Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4
Bug: 9007
Reviewed-on: https://code.wireshark.org/review/10458
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We don't have Wireshark.pkgproj so don't try to copy it.
Change-Id: I649fce27e53cbd45ffc50e4095252a665c49165d
Reviewed-on: https://code.wireshark.org/review/10739
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We've been using QElapsedTimer for a while now with no complaints. It
was introduced in Qt 4.7, which was first released in September 2010.
Change-Id: I21ca768c6a7bab8a08626957583d81fd771c64b4
Reviewed-on: https://code.wireshark.org/review/10732
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a dmg_package_prep target as an alias to app_bundle. Rename the
osx-dmg target to dmg_package. This matches the Windows packaging
target names.
In osx-app.sh, make sure we rpathify the bundle plugin directory.
Change-Id: If41195c9d405ad6bff865625500a8227b77e8092
Reviewed-on: https://code.wireshark.org/review/10734
Reviewed-by: Gerald Combs <gerald@wireshark.org>
On Windows, add a hardening-check target which checks for DYNAMICBASE
and NXCOMPAT using the PowerShell script Get-HardenFlags.ps1.
For a Visual Studio solution, run the check by calling:
msbuild /m /p:Configuration=RelWithDebInfo hardening-check.vcxproj
using the config as appropriate for your build.
Otherwise if we find the Debian/Fedora hardening-check script add a
target which runs it for each of our executables.
Change-Id: I62263e81d155c66e8c8edc751ffab535bf9f3b96
Reviewed-on: https://code.wireshark.org/review/10641
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This lets cmake users configure without installing libusan.
A better or more final fix awaits a decision in bug 11009.
Change-Id: Iea6c4e2ce31817c17931a448f0c72da2a31a2e6d
Ping-Bug: 11009
Reviewed-on: https://code.wireshark.org/review/10454
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
It wasn't working on my system: I kept seeing the old git revision
in '...shark -v' even after deleting version.h
Change-Id: I75f41a7afcee4b9384f33a56014e4af6b527fec5
Reviewed-on: https://code.wireshark.org/review/10265
Petri-Dish: Jörg Mayer <jmayer@loplof.de>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
TODO:
- LUA is commented out probably needs to be built with MSVC 2015.
- GeoIP is commented out, causes packet-ip* to not build.
- Qt not built, needs Qt with MSVC 2015
Change-Id: I1658077931b89b9a22ee32e5ed7de38e07fb6a55
Reviewed-on: https://code.wireshark.org/review/8683
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Migrate the Camel stats similar to the recent BOOTP and H.225
migrations.
Change-Id: If82617068ff4b8fa186899f66dc34a08585f66cb
Reviewed-on: https://code.wireshark.org/review/9865
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Stats were moved to the dissector in g03802cc.
Change-Id: I1aaf43789695ba3aae54cfaf201263cd0aed74ea
Reviewed-on: https://code.wireshark.org/review/9867
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This reverts commit 4a39706272.
At least in one quick check, CMake 2.8.12.2 added that already with Qt 5.5.0.
Change-Id: Iabf0e4aa0aa34b380f981f7d039fb3d95847041e
Reviewed-on: https://code.wireshark.org/review/9654
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Wireshark.nsi requires SMI_DIR to point to the base of the SMI directory
but FindSMI.cmake doesn't set it. Set it in the main CMakeLists.txt
Change-Id: Id667341273d6abb0d2d64ef91cc62d1ce3f42a83
Reviewed-on: https://code.wireshark.org/review/9499
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Change-Id: I0edc3909516452e6497a050b4617f9aafcea2688
Reviewed-on: https://code.wireshark.org/review/9112
Reviewed-by: Michael Mann <mmann78@netscape.net>
A few sample tap/dissectors (ANSI/A, ANSI MAP) are also included to test the API. The "GUI output" is a bit raw and could use some "prettying up", but all the basic hooks are there.
Telephony "stat grouping" needs to be better alphabetized to properly populate menu (on GTK, probably Qt)
Change-Id: I98514171f69c4ab3a304dccb26c71d629703c9ab
Reviewed-on: https://code.wireshark.org/review/9110
Reviewed-by: Michael Mann <mmann78@netscape.net>
This got missed in the initial refactoring.
Change-Id: I98dcc0816e065efab9b497f753c8d2d388349ff3
Reviewed-on: https://code.wireshark.org/review/9044
Reviewed-by: Michael Mann <mmann78@netscape.net>
Very similar to the refactoring of SRT stats, it provides more commonality of the stats for all GUI interfaces. Currently implemented for TShark and GTK. Affected dissectors: MEGACO, MGCP, Radius
Change-Id: Icb73a7e603dc3502b39bf696227fcaae37d4ed21
Reviewed-on: https://code.wireshark.org/review/8998
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Create "common" SRT tap data collection intended for all GUIs. Refactor/merge functionality of existing dissectors that have SRT support (AFP, DCERPC, Diameter, FC, GTP, LDAP, NCP, RPC, SCIS, SMB, and SMB2) for both TShark and GTK.
SMB and DCERPC "tap packet filtering" were different between TShark and GTK, so I went with GTK filter logic.
CAMEL "tap packet filtering" was different between TShark and GTK, so GTK filtering logic was pushed to the dissector and the TShark tap was left alone.
Change-Id: I7d6eaad0673fe628ef337f9165d7ed94f4a5e1cc
Reviewed-on: https://code.wireshark.org/review/8894
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Set the CMake policy for CMP0042 to old
Change-Id: I2b71e1d8d9b9b90ede11df1a7874a2360c3032c5
Reviewed-on: https://code.wireshark.org/review/8740
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for the locally modified version of zlib to suppress
a CMake warning and disable building of the zlib examples.
Change-Id: I9ae08b49d149951e8626d506f69f1757a1ec7e23
Reviewed-on: https://code.wireshark.org/review/8706
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Rename a local CMake variable to prevent CMP0054 warnings in
CheckTypeSize and CheckStructHasMember modules.
Change-Id: Ida0df954c81333ad37455db90e0d72ca9df8c6f1
Reviewed-on: https://code.wireshark.org/review/8522
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Make the gitversion target depend on version.h instead of running
make-version.pl separately. Make wsutil and qtui depend on gitversion.
Change-Id: I32f25347c12c7f86b2439ed4bf517cc8f5fb106f
Reviewed-on: https://code.wireshark.org/review/8299
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: Iab2559c2bac5550987c108c6e917506fcec525e9
Reviewed-on: https://code.wireshark.org/review/8221
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
An undefined or invalid PROCESSOR_ARCHITECTURE will produce an invalid
wireshark.exe.manifest. Make sure it's always set.
Change-Id: I1b33f7bd5e964f05344919d1f11d88c14104c0ce
Reviewed-on: https://code.wireshark.org/review/8253
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Allow the wireshark libs directory to be defined by WIRESHARK_LIB_DIR.
Ensure either WIRESHARK_LIB_DIR or WIRESHARK_BASE_DIR is defined.
Ensure the compiler is a supported version (VS2010, 12 or 13).
Change-Id: I0abd371c5773c08ca255abe308d1a59e2e290a02
Reviewed-on: https://code.wireshark.org/review/8247
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Set the minimum version for Windows to 3.1.3
Set the policy for CMP0054 to squelch a few warnings.
Change-Id: I7647a0e5dce83db2cd87d7b8048c808e10863c7e
Reviewed-on: https://code.wireshark.org/review/8241
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
This is a "refactoring part 1" of the srt stats. This first step is using the service_response_time_table for all (possible) TShark srt stats. Next step will be combining the GTK and TShark service_response_time_table, so there is more code reuse and the "shared structure names" between GTK and TShark service_response_time_table won't seem as bad.
Maybe it can even go one step farther and handle a dynamic number of columns so this refactoring can apply to all srt stats.
Change-Id: Ief28e7e55f7dbbf4f2d9bb6f1a1592b87b866137
Reviewed-on: https://code.wireshark.org/review/8210
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I66247132f00c83f35cf78cb63ea00a5ce923fddb
Reviewed-on: https://code.wireshark.org/review/8211
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 9363
Change-Id: Ic64716ef0156607ca40773cef8e76fc4a0825b3c
Reviewed-on: https://code.wireshark.org/review/8196
Reviewed-by: Michael Mann <mmann78@netscape.net>
Standardise the args to win-setup.ps1
Change-Id: Ibd9d7bb338edb1cef444abc37a7b103eec38fb09
Reviewed-on: https://code.wireshark.org/review/8173
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Changed path from "share" to one based on plugns path
For example /usr/local/lib/wireshark/extcap
Change-Id: I8f4a9f274b1cec897ed45de9e05679ac3f230301
Reviewed-on: https://code.wireshark.org/review/8161
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Tested-by: Balint Reczey <balint@balintreczey.hu>
Fix up generation messages for Windows build
Remove some superfluous Lua messages
Change-Id: I405e7edfcb043fc842fe4f0cca8d23d5755527f9
Reviewed-on: https://code.wireshark.org/review/8138
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Make sure the target location for extcap executables and extcap_dir
match on OS X.
Set the extcap directory to Contents/MacOS/extcap. The Mac Developer
Library documentation doesn't explicitly define "Resources", but
examples include data files and not executables. It does state that
executables shouldn't go into PlugIns.
Make sure we rpathify androiddump.
Change-Id: If36c762e2a1991c26e5c01a870deaf191bcf9f94
Reviewed-on: https://code.wireshark.org/review/8093
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Newer versions of CMake generate warnings about the use of
@variable@ references, replace @CPACK_PACKAGE_NAME@ with
${CPACK_PACKAGE_NAME}
Set the policy for CMP0026 to be old to squelch warnings about the
use of target LOCATION
Change-Id: I424083260c51875dde80f98a23d6528c31ff0aec
Reviewed-on: https://code.wireshark.org/review/7977
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
androiddump should be put in extcat directory.
Change-Id: I360eef2d5a68178c73181949b0fe3346585f5190
Reviewed-on: https://code.wireshark.org/review/8083
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Try not to overwrite gspawn*.exe between signing them and packaging
them. (Second try.)
Change-Id: I717f5fca6dc6afbc146927d06e6f74ae6a0a87c8
Reviewed-on: https://code.wireshark.org/review/8082
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This accidentally reverted code from g40ce324. Will try again shortly.
This reverts commit 8d9fdda991.
Change-Id: I0bf7f351b926f1ce4b0c9e19fe0367add1dfee1e
Reviewed-on: https://code.wireshark.org/review/8081
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Try not to overwrite gspawn*.exe between signing them and packaging them.
Change-Id: I9f224b64537c3b0dd6f7f8b94a8837bd427ad2ca
Reviewed-on: https://code.wireshark.org/review/8080
Reviewed-by: Gerald Combs <gerald@wireshark.org>
On Windows, prepend the main program directory to %Path% when spawning
extcap processes. This lets us place androiddump in extcap while allowing
it to locate its DLLs.
Change-Id: I406c47ce71323266d5f14fb596931398464e452d
Reviewed-on: https://code.wireshark.org/review/8057
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add win-setup.ps1, which duplicates the following tasks performed by
config.nmake + Makefile.nmake + win-setup.sh:
- Create the windows library directory.
- Download files.
- Download and unpack zip files.
- Check and set current-tag.txt
Don't verify applications or libraries. CMakeLists.txt does that.
Update the Developer's Guide.
Have POWERSHELL_COMMAND use dot sourcing instead of "-File", which
appears to be a synonym for "-IgnoreTheExitStatusReturnedByThisScript".
This removes our dependencies on unzip and wget and reduces our dependency
on bash.
Change-Id: Ia9def24acbe183d81b9d477fa42e655e4a3a6614
Reviewed-on: https://code.wireshark.org/review/7990
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The Visual Studio solution files created by CMake list "Debug" as the
first configuration, which means that we end up with zlibd1.dll by
default. Many of the OpenSUSE DLLs depend on zlib1.dll. Add the OBS
version in that case.
Change-Id: Ia98490f1a192802d1482e0749bbd2b550e916bc5
Reviewed-on: https://code.wireshark.org/review/8051
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add missing androiddump stuff like:
- release notes
- documentation
- Windows nmake support
- running androiddump as a windows application instead of console on Windows
- addition of androiddump to the Windows installer
Change-Id: I3bc6cc70e4dc96c0cd776f3d965dd2aa0309995d
Reviewed-on: https://code.wireshark.org/review/7981
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
If we're building on Windows and %Platform% is "x64" or undefined,
check it against our generator's target platform.
Update the "${CMAKE_GENERATOR} MATCHES" regexes to match what CMake
uses internally.
Change-Id: I33996344978855cbdf7c1ee9e55b7340efea5b5c
Reviewed-on: https://code.wireshark.org/review/7994
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
The change to zlib 1.28 requires the variable BUILD_SHARED_LIBS
to be set and true to build the correct zlib dll on Windows.
Change-Id: I0f46b832726834a4e99d7d7d0637112da9c0c531
Reviewed-on: https://code.wireshark.org/review/7982
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
androiddump is extcap program that can be used with Android devices
(need Android SDK in system PATH). Supported is Logcat/Logger logs and
Bluetooth interfaces for all Android to this day (Lollipop).
Please note that it will work also for FirefoxOS.
Interfaces:
1. Logcat Main (binary or text)
2. Logcat System (binary or text)
3. Logcat Events (binary or text)
4. Logcat Radio (binary or text)
5. Logcat Crash (text; Lollipop)
6. Bluetooth Hcidump (<Kitkat)
7. Bluetooth Bluedroid External Parser (Kitkat)
8. Bluetooth BtsnoopNet (Lollipop)
Change-Id: I26e4cd1a37a6af805f8b932399b4aa44ee7b5a80
Reviewed-on: https://code.wireshark.org/review/7475
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Modify CMake to compile zlib, removing need for an nmake compilation
of zlib before running CMake.
Change-Id: I63cead55b14d6a2e22b1b6a8536eaf9260e21231
Reviewed-on: https://code.wireshark.org/review/7864
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Removed the redundant setpath batch file and associated macro
and updated docs.
Change-Id: I5ddab6bad2d14ed3443194d7269f1890e4aa608e
Reviewed-on: https://code.wireshark.org/review/7826
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Add FOLDER properties to targets to tidy up the VS solution
Change-Id: Ia42e0e89fb490cd3dcd33b7c5f59eb0a27b74c7a
Reviewed-on: https://code.wireshark.org/review/7822
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
A recent commit broke compilation with Python 3. The original author of
html2text.py is deceased and the fork has increased the number of files
for this "simple" helper.
The html2text.py script in this patch was rewritten and its output
matches with lynx (except for a few newlines around lists). This means
that indentation has been added for headings, paragraphs and lists.
Also, since it was written from scratch, a new license could be chosen
that matches Wireshark.
Since now the in-tree html2text.py script provides nicer output, remove
detection of the alternative programs (elinks, links). lynx/w3m is
somehow still necessary for asciidoc though.
(I also looked into reusing html2text.py for the release notes to
replace asciidoc, but the --format=html output produces different output
(HTML adds a ToC and section numbers). For now still require lynx for
release notes)
Tested with Python 2.6.6, 2.7.9, 3.2.6 and 3.4.3 under LC_ALL=C and
LC_ALL=en_US.UTF-8 on Linux. Tested reading from stdin and file, writing
to file, pipe and tty. Tested with cmake (Ninja) and autotools on Arch
Linux x86_64. Test:
# For each $PATH per python version, execute (with varying LC_ALL)
help/faq.py -b | tools/html2text.py /dev/stdin | md5sum
help/faq.py -b | tools/html2text.py | md5sum
help/faq.py -b | tools/html2text.py
help/faq.py -b | tools/html2text.py >/dev/null
Change-Id: I6409450a3e6c8b010ca082251f9db7358b0cc2fd
Reviewed-on: https://code.wireshark.org/review/7779
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a "test-programs" target to each toolchain which builds each unit
test executable. "test-programs" must now be built before running
the unit test suite.
Change-Id: I9317a1e305d987f244c4bd8b4a7f05d11fed7090
Reviewed-on: https://code.wireshark.org/review/7673
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add packaging/nsis/CMakeLists.txt and use it to generate each NSIS include
file. Add macros to generate packaging-related targets and invoke them
from the top-level CMakeLists.txt.
Add a top-level "plugins" target. Copy plugins to "plugins" in each of
our staging directories instead of "plugins/$VERSION".
Add missing files to the copy_data_files and copy_cli_dlls targets.
Add all files in the NSIS package from the staging directory.
Drop a bunch of no-longer-needed defines, e.g. MSVC_VARIANT.
Change-Id: Ib1079260d164c65118050f1431af8e582cd577fa
Reviewed-on: https://code.wireshark.org/review/6459
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Process wslua/CMakeLists.txt using add_subdirectory instead of
include. Generate files in the build directory instead of the source
directory.
Copy lua scripts to DATAFILE_DIR instead of DATAFILE_DIR/lua. That's
where init.lua looks for console.lua.
Always set WIRESHARK_RUN_FROM_BUILD_DIRECTORY when testing. We
presumably want to test our source files and not files which may or
may not be in the system path.
When we're running from the build directory look for lua scripts in both
the Autotools and CMake build locations.
Change-Id: Ic15ab8c58ff1b170d000c9b3e0a329af2ec44b7b
Reviewed-on: https://code.wireshark.org/review/7590
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Create a wrapper script that cd's to the test directory and execs
test.sh. We need to handle build configurations so the path is a bit
roundabout.
Change-Id: I4c2a48c041bce2479422830110b1251b3f2c5a94
Reviewed-on: https://code.wireshark.org/review/7570
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "flavor" (for lack of a better word) banner, which can be set at
build time via WIRESHARK_VERSION_FLAVOR / VERSION_FLAVOR. Set it to
"Development Build" by default. This effectively migrates the
"DEVELOPMENT VERSION" logo image text from the GTK+ UI.
Add full release and automatic update information at the bottom.
Remove the short version from the welcome banner (top left).
To do:
- Add back support for gui_version_placement.
- Move the version and repository branch to the flavor label?
- Add update links as appropriate to the bottom.
- Clean up layout and spacing.
Change-Id: I28af33e6c2beb855f803a2dfedef49f3e8389057
Reviewed-on: https://code.wireshark.org/review/7071
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Squelch warnings due to (char *) casts.
Use "include_directories(SYSTEM..." in CMakeLists.txt so that we
don't get pedantic warnings about things we can't easily fix such
as QList loop optimizations. Not sure if there's an easy way to do
this in Autotools.
Pass get_gui_compiled_info to init_progfile_dir. C++ don't have to
show you any stinkin' ::main.
warning: ISO C++ forbids taking address of function ‘::main’ [-Wpedantic]
Change-Id: If1c77284ab0d1b4786bce4e926a4109dd9b1ae34
Reviewed-on: https://code.wireshark.org/review/7207
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Test the compiler for "-Wpedantic" instead of "-pedantic" since DIAG_OFF
and DIAG_ON expect a "-W" flag prefix. Be more strict about the compiler
versions that DIAG_OFF and DIAG_ON support.
Change-Id: I9304c544912102f1719b79e9250f97b40a324430
Reviewed-on: https://code.wireshark.org/review/7123
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Hopefully Gerald's change will fix this annoyance once and for all.
Change-Id: I547b221a670f1435fa86cb96b084cfa5b788c57f
Reviewed-on: https://code.wireshark.org/review/6971
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Semi-blind attempt to fix what appears to be a race condition on the OS
X x86 buildbot.
Change-Id: I379c7dec26c2bca092d0c9a49465ee56a01d15ec
Reviewed-on: https://code.wireshark.org/review/6969
Reviewed-by: Gerald Combs <gerald@wireshark.org>
It didn't fail with cp, so maybe that's just random luck, or maybe the
built-in copy functions have an issue, or maybe just copy_if_different
has an issue (64-bit inode number issues?). Try just copy, and see what
happens.
Change-Id: I84abf3846af9305c19ad4a78d5c9df31b1e1e61e
Reviewed-on: https://code.wireshark.org/review/6961
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The 32-bit OS X build is failing rather often due to cmake -E
copy_if_different failing to copy wireshark.html, and to call cmake's
copy functions completely crappy at reporting errors is to insult
software that's merely completely crappy at reporting errors. Try using
cp in the hopes that it'll actually tell us *WHY* the copy is failing
and see if we can fix it.
Change-Id: I723150c52c2ec0fe704d54191ef27fb6caf47fba
Reviewed-on: https://code.wireshark.org/review/6960
Reviewed-by: Guy Harris <guy@alum.mit.edu>
As it turns out, building the app bundle makes wireshark-gtk unusable.
Change-Id: Ic3608f0a485c3ec4ea21fbc2e7194553eda8c806
Reviewed-on: https://code.wireshark.org/review/6938
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Run osx-app.sh by default on OS X. Aside from giving us a fully portable
application bundle after building this should let us clear our library
path at startup should the need arise. Change the name of the osx-app
target to app_bundle.
Search ../Frameworks before ../lib. Create PkgInfo at configure time
instead of compile time. Build our program list as we go.
Change-Id: If5511ee921108b1c079cef67026eac9e47211be1
Reviewed-on: https://code.wireshark.org/review/6896
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Create DATAFILE_DIR when we're building an application bundle. Hopefully
this will fix the build error on the OS X x86 builder.
Change-Id: I57414bcd87ab21958ae8131a8cd77951b29e02f7
Reviewed-on: https://code.wireshark.org/review/6763
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Move all the SSE 4.2 stuff to wsutil/CMakeLists.txt.
Don't put ws_mempbrk_sse42.c in WSUTIL_FILES by default; add it if we
think the compiler supports compiling for SSE 4.2.
Add -msse4.2 to its COMPILE_FLAGS, but don't add it to any other
compiler flags - we don't want to build anything else with -msse4.2 by
default, as the only code that uses SSE 4.2 instructions but *only* does
so if the processor supports it is our mempbrk implementation. (And
*add* it, don't *replace* the existing flags with -msse4.2; that way,
-Werror is left in there as well.)
Change-Id: I979b37a37e4b88b3af11e2275e89441118c8ce0a
Reviewed-on: https://code.wireshark.org/review/6698
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When building an application bundle, create wrapper scripts at the top
level instead of symlinking to each executable.
Change-Id: I080e43de545a709b29c1d6b6c6ec416e5a5a8247
Reviewed-on: https://code.wireshark.org/review/6683
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Redefine PLUGIN_DIR similar to DATAFILE_DIR and use it on all
platforms. Add WiresharkPlugin.cmake so that we can start defining common
macros for plugins/*/CMakeLists.txt. Load plugins in out-of-tree builds.
Change-Id: I8c1359ed3cf8a71788b8320ff89dfe2d3969def2
Reviewed-on: https://code.wireshark.org/review/6640
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "pdb_zip_package" target similar to the NMake pdb_zip target.
Change-Id: I23d114a63fa05f722ee90b77ea458d9e496e5bf9
Reviewed-on: https://code.wireshark.org/review/6673
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Set DATAFILE_DIR to a value that includes the build configuration. Add a
copy_data_files target that copies AUTHORS-SHORT, the default filters,
and other support files to the run directory. Add FindPowerShell.cmake
and require it on Windows. Remove some OS X BUNDLE_RESOURCE_
declarations which are now covered by copy_data_files.
Change-Id: Iade74946dd5ed2c54239036aa4970f9ffc4681a4
Reviewed-on: https://code.wireshark.org/review/6561
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The windeployqt variable name ends up in the cache. Change it to
QT_WINDEPLOYQT_EXECUTABLE, which follows conventions used in the Qt
CMake modules.
Change-Id: I14998b921009e44e5ca743e2915fe84447b22df0
Reviewed-on: https://code.wireshark.org/review/6549
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The copy-qt-dll custom command should ensure the qt bin dir is on
the path.
Modify the flags passed to windeployqt depending on the configuration.
Change-Id: I12860d415f80cee323c72aa8a4892eaa6126f165
Reviewed-on: https://code.wireshark.org/review/6537
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The flags that are deleted are already supplied by the CMake generator.
Change-Id: Ifafc2343ac0c5d365a39f4a181b23f54c65bce74
Reviewed-on: https://code.wireshark.org/review/6538
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Update the comments and add a URL. Use HINTS, which is more correct
according to the documentation.
Change-Id: I82a7e2790dfa0b398e2b534f9f45851f55bdc0d2
Reviewed-on: https://code.wireshark.org/review/6536
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "copy_qt_dlls" target similar to "copy_cli_dlls". Wireshark.exe
must exist before windeployqt can be run, so we can't create a PRE_BUILD
target. Add copy_qt_dlls to the default target instead.
Change-Id: If85d89478472b10b31229413465955fe98b0ef02
Reviewed-on: https://code.wireshark.org/review/6529
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "copy_cli_dlls" target which copies the DLLs required to run our
command line programs to the run directory.
Fix the spelling of "KERBEROS". Start filling in variables so that we
can populate config.nsh.
Change-Id: I9b3ed912dfbffecbf09f2893efa2c9d82e709521
Reviewed-on: https://code.wireshark.org/review/6513
Reviewed-by: Gerald Combs <gerald@wireshark.org>
CMake now generates local copies of .rc files for all the Windows
components and uses the files in the build of the components.
The .rc.in files that include an icon were modified to allow the icon
path to be set by CMake. The path is removed for nmake builds.
Updated build architecture detection, required for wireshark.manifest.in
Change-Id: I7b1ff43050e9b0efb861d1041636fb4aef49a4f8
Reviewed-on: https://code.wireshark.org/review/6482
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
This gives a more structured layout in Visual Studio
Change-Id: I0da87a3e5ec759c69aeee031366cf287485cdac2
Reviewed-on: https://code.wireshark.org/review/6485
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Graham Bloice <graham.bloice@trihedral.com>
Set the version variables in CMakeLists.txt directly from
make-version.pl instead of pulling them from configure.ac.
Use the correct default value for VERSION_EXTRA in config.nmake.
wireshark-common.files was removed in g97e1491. We don't need to update
it any more.
Change-Id: I751b6df9ac16e19090712aa79a68e308397c1d25
Reviewed-on: https://code.wireshark.org/review/6483
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Set WIRESHARK_TARGET_PLATFORM near the top of CMakeLists.txt. It's used
by a couple of our modules and will be used for NSIS packaging.
Change-Id: Ief43733bdf162998cd54ff3732f94c8baa3d1e11
Reviewed-on: https://code.wireshark.org/review/6458
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a wrapper script and CMake macros which lets us run Cygwin's a2x
from Windows. Add *another* wrapper script that ignores the return value
of hhc.exe.
Move the ASCIIDOC2DOCBOOK macro to FindASCIIDOC.cmake. Add FindHHC.cmake.
Add hints to FindFOP.cmake.
Use unique file names in the HTML Help chain in an attempt to avoid a
race condition.
To do:
- Fix curly quote in HHC title.
Change-Id: I9b154b7fbd02703656e2ab380199ec0a6db4e36d
Reviewed-on: https://code.wireshark.org/review/6379
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Pascal Quantin