Decode the header as specified in http://www.retrocomputing.net/info/doc/GA27-3136-20_SNA_Formats.pdf chapter 13.
Note that the Information field is not decoded yet.
Bug: 13084
Change-Id: Iaaee344ef0b2805906a3eeae1134479abf9d403e
Reviewed-on: https://code.wireshark.org/review/18616
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Th link throughput and latency objects are just 32-bit integers; process
them as such and, as they're bytes-per-second and microsecond values,
respectively, show them as decimal, rather than as hex, as most of us
have 10, not 16, fingers.
The ETX metric object is a 16-bit integer; process it as such, and show
it in decimal as well.
Attach an expert info representing an error to the item in error.
Change-Id: I57dfac0127d263724cc6940a0457d63e17616b64
Reviewed-on: https://code.wireshark.org/review/18617
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I1b20a49008e41728cb10cd11765833a762f66505
Reviewed-on: https://code.wireshark.org/review/18603
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
There could be some reuse out of it, so but it with the rest of the
general utilities.
Change-Id: I404c135b933660a82678510b9ca2701985c5632a
Reviewed-on: https://code.wireshark.org/review/18589
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
1. Fixed setting right address type instead of AT_IB for RoCE and RRoCE
depending on address type given by pinfo where address type would be
IPv4 or IPV6.
Fail to do so was resulting into infiniband dissector adding
conversation info based on AT_IB type vs payload dissectors dissecting
based on pinfo. Fixing this allows to add/search based on right
address type.
(Tested for Infiniband and RRoCE)
2. Added support to pass already parsed CM attribute id from infiniand to
other mad private data dissectors so that right dissection of private data
can be done based on CM attribute id (message type).
Moved CM attribute id definitions to header file so that private data
dissectors based on CM attribute id can reuse these values without
duplicate defines.
(Tested for Infiniband and RRoCE)
3. Added direction client to server/server to client, (active/passive) to
conversation_data for payload dissectors which cannot dissect only based
on payload content without knowing the direction.
(Tested for RRoCE)
4. Fixed IP CM to claim all 92 bytes of private data (including consumer
private data), instead of just 36 bytes of header because its part of IP
CM private data.
(Tested for Infiniband and RRoCE)
5. Fixed MAD header to claim all 232 (256-24) bytes of data as it belongs
to it in the tree.
(Tested for Infiniband and RRoCE)
6. Fixed getting ip version by performing AND operation first to extract IP
version field.
(Tested for RRoCE-IPV4 and Infiniband)
Change-Id: I37daca6a089784b61c25e10cdc8f3cf028ca8c58
Tested-by: paravpandit@yahoo.com
Reviewed-on: https://code.wireshark.org/review/18573
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
- reinitialize the variable used to insert comma between packets when
performing a new export
- ensure that escaped ASCII characters are code on 4 digits characters
Change-Id: Ib557da4843f6b98f793b60e417260ebb27a38b99
Ping-Bug: 13073
Reviewed-on: https://code.wireshark.org/review/18598
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
* Fixed RAI which was broken
* Improved CGI and SAI
Change-Id: I1807b628ef54e2f3e94551c26301f1376bef0914
Reviewed-on: https://code.wireshark.org/review/18604
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Width of this field was increased in the 1.0a MA USB Update.
Change-Id: Ib1a40dee6fbcfd389c982b53c4b51f538c1973e7
Reviewed-on: https://code.wireshark.org/review/18607
Reviewed-by: Michael Mann <mmann78@netscape.net>
Parses large communities as specified in https://tools.ietf.org/html/draft-heitz-idr-large-community-04
Path Attribute - LARGE_COMMUNITY: 65536:1:1 65536:1:2 65536:1:3
Flags: 0xc0, Optional, Transitive: Optional, Transitive, Complete
1... .... = Optional: Optional
.1.. .... = Transitive: Transitive
..0. .... = Partial: Complete
...0 .... = Length: Regular length
Type Code: LARGE_COMMUNITY (32)
Length: 36
Large communities: 65536:1:1
Global Administrator: 65536
Local Data Part 1: 1
Local Data Part 2: 1
Large communities: 65536:1:2
Global Administrator: 65536
Local Data Part 1: 1
Local Data Part 2: 2
Large communities: 65536:1:3
Global Administrator: 65536
Local Data Part 1: 1
Local Data Part 2: 3
Bug: 13083
Change-Id: I8db0601f621ceb6fb2e170ed9bfc2747091495ee
Reviewed-on: https://code.wireshark.org/review/18172
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Records defined according to 3GPP TS release 14 in new .asn files.
Updated Makefiles and dissector files generated via asn2ws
Change-Id: I6da2782c58178550962f63dbd526b827e0d8394b
Reviewed-on: https://code.wireshark.org/review/18552
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Collect all used PW Associated Channel Types and use them in the
subdissector table registrations.
Change-Id: I5d196bceefdb4560b1f4388ff86898e316e5e2ae
Reviewed-on: https://code.wireshark.org/review/18590
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Also update tfshark to use that code.
Change-Id: Ic03fb8ff48c8bfc460298d180b436e53f0076cbe
Reviewed-on: https://code.wireshark.org/review/18588
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
gdd3b977 introduced the use of wmem_strndup to ensure that the string is
NULL terminated.
But it also stops as soon as it finds a NULL character, which can happen
with malformed packets. So let's copy all the bytes with tvb_memcpy and
add manually a NULL character at the end of the buffer for safeness.
Bug: 13074
Change-Id: I9ae65d739a92bc6167e4acfc275e1909f3890815
Reviewed-on: https://code.wireshark.org/review/18582
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Improve the dissection of the data chunks.
Change-Id: Ic87c84f0c3ea2ccceecb376698eed6b2f6a4e614
Reviewed-on: https://code.wireshark.org/review/18566
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Fix to correctly read unquoted parameter values in Authorization lines.
Code in master branch will look for double quotes as the end of a
parameter value even in case the value is not enclosed in double quotes.
This fix checks if the first character in a value is a double quote in
which case it will scan until a non-escaped finishing double quote is
found to determine the end of the value string. If no double quote is
found as the start of the parameter value it will scan for a comma as
the end of the value string.
Change-Id: I5322caa146d3213bc94ad24528c2fa23cdea10f2
Bug: 13035
Reviewed-on: https://code.wireshark.org/review/18344
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
The channel name is also set in pinfo->match_string to be printed
by the json subdissector.
Change-Id: I9a1c4576ce6d253ef415bda7392b37f2c063c2db
Reviewed-on: https://code.wireshark.org/review/18560
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Also fix a field type conflict noticed in provided capture
Bug: 13050
Change-Id: I3d2643299b6db2729641c72b2e1f054f170b4907
Reviewed-on: https://code.wireshark.org/review/18571
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Bug: 13025
Change-Id: Ie9c12d4f013b5b88b9cce6a09577bc017a3ed655
Reviewed-on: https://code.wireshark.org/review/18480
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug:13068
Change-Id: I4db500030ac2608e57bab4281f44576de9792076
Reviewed-on: https://code.wireshark.org/review/18558
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Bug: 13069
Change-Id: Ia89b29413b565235c8af40adb5722b9e2528d651
Reviewed-on: https://code.wireshark.org/review/18559
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Rename attribute dissecting functions and their local variables to
improve code readability, and adjust white space.
old new
------------------------------------------------------------------
dissect_rohc_supported dissect_rohc_attribute
dissect_transform_ike2_attribute dissect_ike2_transform_attribute
option attribute
optlen value_len
rohc attr_type
transform_attr_type attr_type
cfg_attr_type attr_type
rohc_tree tree
transform_attr_type_tree tree
cfg_attr_type_tree tree
sub_rohc_tree attr_tree
sub_transform_attr_type_tree attr_tree
sub_cfg_attr_type_tree attr_tree
rohc_item attr_item
transform_attr_type_item attr_item
cfg_attr_type_item attr_item
------------------------------------------------------------------
Change-Id: I135e5deb802edc575e7fddd1bb397272aac0888c
Reviewed-on: https://code.wireshark.org/review/18553
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug: 13066
Change-Id: Ia00441a6eea49c56f75f1757041bc7732ff32d00
Reviewed-on: https://code.wireshark.org/review/18555
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Mirror it after protocol dissector API.
Change-Id: I7985bcfa9e07654c7cf005efec94efc205d7a304
Reviewed-on: https://code.wireshark.org/review/18496
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I8c0d18f104bf37686b9b53ad9e7d1b9f8a709f5c
Reviewed-on: https://code.wireshark.org/review/18519
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
and reindent
Change-Id: I3c8835f03e52858e7cb3262043a3fc895b1c4d19
Reviewed-on: https://code.wireshark.org/review/18517
Reviewed-by: Michael Mann <mmann78@netscape.net>
When preference 'Assume bottom of stack label as flow label' is set
all labels are shown as flow labels. This has to be limited to that
MPLS label where Bottom-of-Stack is TRUE.
Change-Id: Iaa8abd095edb7de7f745a78c742a9347d4dbf3d9
Reviewed-on: https://code.wireshark.org/review/18516
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The point of sending an Enable Request is to enable the respective MO.
If the MO responds with any MO state != ENABLED there is something
fishy. Let's inform the user with some Expert Info about it.
Change-Id: Ib33e5dbc37894049b93bb71782787b8c96c04326
Reviewed-on: https://code.wireshark.org/review/18454
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Only pass the C files files to checkAPIs (to match cmake and to allow
checkAPIs to pass this directory).
Change-Id: I305aeaaf1882061bad166957ae83383a0f35dfb7
Reviewed-on: https://code.wireshark.org/review/18513
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Give the right buffer to the decoding function
Bug: 13065
Change-Id: I0e41e04fb68602d95ea6f060c1a37c8b8596134d
Reviewed-on: https://code.wireshark.org/review/18548
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Will now show country and operator
Change-Id: Ic16623c226228ab0c3e31d33cda81953c80551d6
Reviewed-on: https://code.wireshark.org/review/18512
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Alexis La Goutte
Harald Welte