1. Case sensitivity differences between hf_ field name and formatted string.
2. Unnecessary whitespace between hf_ field name and colon in formatted string
There are cases where the hf_ field name doesn't quite match the proto_tree_add_uint_format, but it's close enough that one of them should be "right", I'm just not sure which is, I just know the string in proto_tree_add_uint_format is the one displayed.
svn path=/trunk/; revision=52098
The script didn't catch as many as I would have liked, but it's a start.
The most common (ab)use of proto_tree_add_uint_format was for appending strings to CRC/checksum values to note good or bad CRC/checksum.
svn path=/trunk/; revision=52045
Cast away some implicit 64-bit-to-32-bit conversion errors due to use of
sizeof.
Cast away some implicit 64-bit-to-32-bit conversion errors due to use of
strtol() and strtoul().
Change some data types to avoid those implicit conversion warnings.
When assigning a constant to a float, make sure the constant isn't a
double, by appending "f" to the constant.
Constify a bunch of variables, parameters, and return values to
eliminate warnings due to strings being given const qualifiers. Cast
away those warnings in some cases where an API we don't control forces
us to do so.
Enable a bunch of additional warnings by default. Note why at least
some of the other warnings aren't enabled.
randpkt.c and text2pcap.c are used to build programs, so they don't need
to be in EXTRA_DIST.
If the user specifies --enable-warnings-as-errors, add -Werror *even if
the user specified --enable-extra-gcc-flags; assume they know what
they're doing and are willing to have the compile fail due to the extra
GCC warnings being treated as errors.
svn path=/trunk/; revision=46748
Feedback NACK PID", not just as "RTCP Transport Feedback NACK", and give
the field a name for that.
Use it in the protocol tree for the bits of the BLP field, rather than
making it a hidden field there.
Clean up the tags appended to the BLP field.
svn path=/trunk/; revision=45157
text.
Don't put empty items into the bitfield tree.
Show the BLP field as hex, as it's a bitfield.
(What should *really* happen is that it should display each 1 bit in the
usual fashion, with the ".... ...1 .... ...." display, but have that bit
be an *integral* field with the appropriate PID for the NACKed packet -
i.e., display hf_rtcp_rtpfb_nack_pid, with the value
rtcp_rtpfb_nack_pid + i + 1, and with the bitfield stuff in the
displayed representation.)
svn path=/trunk/; revision=45155
1. If there's no character encoding (ENC_ASCII, ...) specified
then use ENC_ASCII.
2. For all but FT_UINT_STRING, always use ENC_NA
(replacing any existing True/1/FALSE/0
/ENC_BIG_ENDIAN/ENC_LITTLE_ENDIAN).
svn path=/trunk/; revision=39426
Specifically: Replace FALSE|0 and TRUE|1 by ENC_BIG_ENDIAN|ENC_LITTLE_ENDIAN as
the encoding parameter for proto_tree_add_item() calls which directly reference
an item in hf[] which has a type of:
FT_BOOLEAN
FT_IPv4
FT_EUI64
FT_GUID
FT_UINT_STRING
Also: For type FT_ITv6 use ENC_NA. (This was missed in SVN #39260)
svn path=/trunk/; revision=39328
Specifically: Replace FALSE|0 and TRUE|1 by ENC_BIG_ENDIAN|ENC_LITTLE_ENDIAN as
the encoding parameter for proto_tree_add_item() calls which directly reference
an item in hf[] which has a type of:
FT_UINT8
FT_UINT16
FT_UINT24
FT_UINT32
FT_UINT64
FT_INT8
FT_INT16
FT_INT24
FT_INT32
FT_INT64
FT_FLOAT
FT_DOUBLE
svn path=/trunk/; revision=39288
FT_NONE
FT_BYTES
FT_IPV6
FT_IPXNET
FT_OID
Note: Encoding field set to ENC_NA only if the field was previously TRUE|FALSE|ENC_LITTLE_ENDIAN|ENC_BIG_ENDIAN
svn path=/trunk/; revision=39260
This was in response to a VS Code Analysis warning. Not sure if it was confused by lack of parenthesis, or if it detected that we had an && where both sides would always have the same value, but it was confusing.
svn path=/trunk/; revision=36743
an offset instead of (generally) a pointer into the TVB. Then use the standard
accessor functions to get data out of the TVB.
svn path=/trunk/; revision=35886