as the "where to put the packet data" argument.
This lets more of the libwiretap code be common between the read and
seek-read code paths, and also allows for more flexibility in the "fill
in the data" path - we can expand the buffer as needed in both cases.
svn path=/trunk/; revision=49949
both the read and the seek-read routines. Have the read routine return
the offset of the record header as the record's offset, so that the
seek-read routine can read that header.
svn path=/trunk/; revision=49397
leads to a double-free in wtap_close. Fix all the instances I found via
manual code review, and add a brief comment to the list of open routines in
file_access.c
Fixes https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8518
svn path=/trunk/; revision=48552
implemented wtap_dump_file_seek() and _tell()
implemented the previously declared but unimplemented wtap_dump_file_seek() and wtap_dump_file_tell() functions and used them in the seven files that had previously used a plain ftell or fseek and added error checking as appropriate. I also added a new error WTAP_ERR_CANT_SEEK_COMPRESSED and put it next to WTAP_ERR_CANT_SEEK causing renumbering of two of the existing error codes.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8416
svn path=/trunk/; revision=48348
wtap_file_read_expected_bytes() from an open routine - open routines are
supposed to return -1 on error, 0 if the file doesn't appear to be a
file of the specified type, or 1 if the file does appear to be a file of
the specified type, but those macros will cause the caller to return
FALSE on errors (so that, even if there's an I/O error, it reports "the
file isn't a file of the specified type" rather than "we got an error
trying to read the file").
When doing reads in an open routine before we've concluded that the file
is probably of the right type, return 0, rather than -1, if we get
WTAP_ERR_SHORT_READ - if we don't have enough data to check whether a
file is of a given type, we should keep trying other types, not give up.
For reads done *after* we've concluded the file is probably of the right
type, if a read doesn't return the number of bytes we asked for, but
returns an error of 0, return WTAP_ERR_SHORT_READ - the file is
apparently cut short.
For NetMon and NetXRay/Windows Sniffer files, use a #define for the
magic number size, and use that for both magic numbers.
svn path=/trunk/; revision=46803
which could use lseek() and were thus expensive due to system call
overhead. To avoid making a system call for every packet on a
sequential read, we maintained a data_offset field in the wtap structure
for sequential reads.
It's now a routine that just returns information from the FILE_T data
structure, so it's cheap. Use it, rather than maintaining the data_offset
field.
Readers for some file formats need to maintain file offset themselves;
have them do so in their private data structures.
svn path=/trunk/; revision=42423
by Wiretap, to indicate whether certain fields in that structure
actually have data in them.
Use the "time stamp present" flag to omit showing time stamp information
for packets (and "packets") that don't have time stamps; don't bother
working very hard to "fake" a time stamp for data files.
Use the "interface ID present" flag to omit the interface ID for packets
that don't have an interface ID.
We don't use the "captured length, separate from packet length, present"
flag to omit the captured length; that flag might be present but equal
to the packet length, and if you want to know if a packet was cut short
by a snapshot length, comparing the values would be the way to do that.
More work is needed to have wiretap/pcapng.c properly report the flags,
e.g. reporting no time stamp being present for a Simple Packet Block.
svn path=/trunk/; revision=41185
form of corruption/bogosity in a file, including in a file header as
well as in records in the file. Change the error message
wtap_strerror() returns for it to reflect that.
Use it for some file header problems for which it wasn't already being
used - WTAP_ERR_UNSUPPORTED shouldn't be used for that, it should only
be used for files that we have no reason to believe are invalid but that
have a version number we don't know about or some other
non-link-layer-encapsulation-type value we don't know about.
svn path=/trunk/; revision=40175
same.
Add to wiretap/pcap-common.c a routine to fill in the pseudo-header for
ATM (by looking at the VPI, VCI, and packet data, and guessing) and
Ethernet (setting the FCS length appropriately). Use it for both pcap
and pcap-ng files.
svn path=/trunk/; revision=38840
header bytes read, as we're reading the two header fields separately and
checking the byte count for each read. We *do*, however, know that the
record header is 4 bytes long, so we can just seek back 4 bytes.
svn path=/trunk/; revision=37953
by the gunzipping code. Have it also supply a err_info string, and
report it. Have file_error() supply an err_info string.
Put "the file" - or, for WTAP_ERR_DECOMPRESS, "the compressed file", to
suggest a decompression error - into the rawshark and tshark errors,
along the lines of what other programs print.
Fix a case in the Netscaler code where we weren't fetching the error
code on a read failure.
svn path=/trunk/; revision=36748
can't be saved in compress form" are both equivalent to "this file file
format requires seeking when writing it". Change the "can compress"
Boolean in the file format table to "writing requires seeking", give all
the entries the proper value, and do the checks for attempting to write
a file format to a pipe or write it in compressed format to common code.
This means we don't need to pass the "can't seek" flag to the dump open
routines.
svn path=/trunk/; revision=36575
file_read(buf, bsize, count, file) macro is compilant with fread
function and takes elements count+ size of each element, however to make
it compilant with gzread() it always returns number of bytes.
In wiretap file_read() this is not really used, file_read is called
either with bsize set to 1 or count to 1.
Attached patch remove bsize argument from macro.
svn path=/trunk/; revision=36491
wtap_dump_file_write(). Replace various wrappers around fwrite() with
wtap_dump_file_write(), or at least make the wrappers call
wtap_dump_file_write().
svn path=/trunk/; revision=33116
wtap-int.h, and change the unions of pointers to those private data
structures into just void *'s.
Have the generic wtap close routine free up the private data, rather
than the type-specific close routine, just as the wtap_dumper close
routine does for its private data. Get rid of close routines that don't
do anything any more.
svn path=/trunk/; revision=32015
types in the modules for those capture file types, not in wtap-int.h, so
wtap-int.h doesn't have to change when the code to handle that
particular capture type changes, or a new capture file type is added.
(Ultimately, we should do this for all the private data structures.)
svn path=/trunk/; revision=31974
remove all compiler warnings:
a) prevent wrong malloc/free definitions by lex/yacc generated files
b) add int/time_t casts - MSVC2005 is more "sensitive" about this than MSVC6
svn path=/trunk/; revision=21078
- automatic adjustment depending on file format
- manual adjustment through menu items
save the setting in the recent file
svn path=/trunk/; revision=15534
I've done more than a day to change the timestamp resolution from microseconds to nanoseconds. As I really don't want to loose those changes, I'm going to check in the changes I've done so far. Hopefully someone else will give me a helping hand with the things left ...
What's done: I've changed the timestamp resolution from usec to nsec in almost any place in the sources. I've changed parts of the implementation in nstime.s/.h and a lot of places elsewhere.
As I don't understand the editcap source (well, I'm maybe just too tired right now), hopefully someone else might be able to fix this soon.
Doing all those changes, we get native nanosecond timestamp resolution in Ethereal. After fixing all the remaining issues, I'll take a look how to display this in a convenient way...
As I've also changed the wiretap timestamp resolution from usec to nsec we might want to change the wiretap version number...
svn path=/trunk/; revision=15520
they have LF at the end of the line on UN*X and CR/LF on Windows;
hopefully this means that if a CR/LF version is checked in on Windows,
the CRs will be stripped so that they show up only when checked out on
Windows, not on UN*X.
svn path=/trunk/; revision=11400
WTAP_ERR_UNSUPPORTED_ENCAP, not WTAP_ERR_UNSUPPORTED, as it presumably
means the capture was done on some type of device we don't know about.
svn path=/trunk/; revision=11339
rather than requiring individual capture file type handlers to do it
(unless they're doing per-packet encapsulation, in which case we check
to make sure they didn't *leave* it as WTAP_ENCAP_PER_PACKET).
svn path=/trunk/; revision=10290
addition to an error code, an error info string, for
WTAP_ERR_UNSUPPORTED, WTAP_ERR_UNSUPPORTED_ENCAP, and
WTAP_ERR_BAD_RECORD errors. Replace the error messages logged with
"g_message()" for those errors with g_strdup()ed or g_strdup_printf()ed
strings returned as the error info string, and change the callers of
those routines to, for those errors, put the info string into the
printed message or alert box for the error.
Add messages for cases where those errors were returned without printing
an additional message.
Nobody uses the error code from "cf_read()" - "cf_read()" puts up the
alert box itself for failures; get rid of the error code, so it just
returns a success/failure indication.
Rename "file_read_error_message()" to "cf_read_error_message()", as it
handles read errors from Wiretap, and have it take an error info string
as an argument. (That handles a lot of the work of putting the info
string into the error message.)
Make some variables in "ascend-grammar.y" static.
Check the return value of "erf_read_header()" in "erf_seek_read()".
Get rid of an unused #define in "i4btrace.c".
svn path=/trunk/; revision=9852
"gint8" - there's no reason for them to be signed, and making them
signed can cause compiler warnings if a value won't fit in 8 bits if
sign-extended.
svn path=/trunk/; revision=9467
0 means "there is no FCS in the packet data", 4 means "there is an FCS
in the packet data", -1 means "I don't know whether there's an FCS in
the packet data, guess based on the packet size".
Assume that Ethernet encapsulated inside other protocols has no FCS, by
having the "eth" dissector assume that (and not check for an Ethernet
pseudo-header).
Have "ethertype()" take an argument giving the FCS size; pass 0 when
appropriate.
Fix up Wiretap routines to set the pseudo-header. This means we no
longer use the "generic" seek-and-read routine, so get rid of it.
svn path=/trunk/; revision=8574
rathe than the record length minus the record header length, as the
number of available (captured) bytes in the packet. Check to make sure
that value isn't bigger than the record length minus the header length.
Only subtract the 4-byte FCS length from the purported length of the
packet on the wire if that would leave the on-the-wire length >= the
number of captured bytes, so that we can better handle capture files
from programs that produce LANalyzer-format captures where the
on-the-wire length *doesn't* include the FCS.
svn path=/trunk/; revision=7948
All files:
- Replace types from sys/types.h by those from glib.h
- Replace ntoh family of macros from netinet/in.h and winsock2.h
by g_ntoh family from glib.h
- Remove now unneeded includes of sys/types.h, netinet/in.h and
winsock2.h
wtap.h
Move includes to the top
svn path=/trunk/; revision=5909
Guy Harris