that the loop in "lanalyzer_open()" is an infinite loop, so the "return
0;" at the end isn't necessary to suppress a compiler warning with that
compiler - and Sun C not only figures it out, it warns that the
"g_assert_not_reached()" and the "return 0;" are unreachable, so I'll
take them out for now (and put them back if my older GCC at home still
requires it to suppress warnings).
svn path=/trunk/; revision=3310
beginning of the file before reading anything from the file is bogus -
do that in the loop that tries each of the open routines, instead.
(They may have to reset the seek pointer later if, for example, the
capture file begins with the first packet, and the "open()" routine
looks at that packet to try to guess whether the packet is in the file
format in question.)
Set "wth->data_offset" to 0 while you're at it, so capture file readers
don't have to do that, either.
svn path=/trunk/; revision=3123
pseudo_header.
Use generic "p2p_phdr" instead of "lapd_phdr". Modify toshiba.c and
packet-lapd.c to take that into account.
Add frame.p2p_dir, a filterable field, 0=sent, 1=recvd
Make p2p_dir available in packe_info, as I think it will be needed
in VJ COMP and UNCOMP dissection.
Rename WTAP_ENCAP_TR to WTAP_ENCAP_TOKEN_RING.
Mention pppd-log support in man page.
Mention atmsnoop in README.
svn path=/trunk/; revision=2455
a "keep reading" boolean value is returned from the function.
This avoids having to hack around the fact that some file formats truly
do have records that start at offset 0. (i4btrace and csids have no
file header. Neither does the pppdump-style file that I'm looking at right now).
svn path=/trunk/; revision=2392
to that file, leave public definitions in wtap.h.
Rename "union pseudo_header" to "union wtap_pseudo_header".
Make the wtap_pseudo_header pointer available in packet_info struct.
svn path=/trunk/; revision=1989
there's no need to keep it around in memory - when the frame data is
read in when handing a frame, read in the information, if any, necessary
to reconstruct the frame header, and reconstruct it. This saves some
memory.
This requires that the seek-and-read function be implemented inside
Wiretap, and that the Wiretap handle remain open even after we've
finished reading the file sequentially.
This also points out that we can't really do X.25-over-Ethernet
correctly, as we don't know where the direction (DTE->DCE or DCE->DTE)
flag is stored; it's not clear how the Ethernet type 0x0805 for X.25
Layer 3 is supposed to be handled in any case. We eliminate
X.25-over-Ethernet support (until we find out what we're supposed to
do).
svn path=/trunk/; revision=1975
from the frame table - Network Monitor 2.x, at least, doesn't always
write frame N+1 right after frame N.
To do that, we need to mallocate a big array to hold the frame table,
and free it when we close the capture file; this requires that we have
capture-file-type-specific close routines as well as
capture-file-type-specific read routines - we let it the pointer to that
routine be null if it's not needed. Given that, we might as well get
rid of the switch statement in "wtap_close()", in favor of using
capture-file-type-specific close routines, as per the comment before
that switch statement.
svn path=/trunk/; revision=1740
hideous problem on FreeBSD 3.[23] (and perhaps other BSDs) if
HAVE_UNISTD_H is defined before "zlib.h" is included, turn "file_seek()"
into a subroutine defined in a file that *undefines* HAVE_UNISTD_H
before including "zlib.h", so that the *only* call to "gzseek()" is made
from a file that does not have HAVE_UNISTD_H defined when it includes
"zlib.h".
Move "file_error()" to that file while you're at it, so it holds all the
wrappers that hide the presence or absence of zlib from routines to read
capture files.
Turn "file.h", which declared those wrapper functions as well as wrapper
macros, into "file_wrapper.h" - it belongs with the "file_wrapper.c"
file that defines the wrapper functions, not with "file.c" which handles
higher-layer file access functions.
Remove the comment in "configure.in" that explained why defining
HAVE_UNISTD_H was a bad idea, as we're not obliged to define it and work
around the problem. (The comment in "file_wrapper.c" explains the
workaround.)
svn path=/trunk/; revision=1463
and aligned g_malloc calls with g_free calls (i.e, we no longer mix-and-match
C-library malloc with GLIB g_free, and vice-versa).
svn path=/trunk/; revision=1000
Assign a range of Wiretap errors for zlib errors, and have
"wtap_strerror()" use "zError()" to get an error message for
them.
Have the internal "file_error()" routine return 0 for no error
and a Wiretap error code for an error.
svn path=/trunk/; revision=769
The "fh" member of a "wtap" structure points to something constructed
from the "fd" member of that structure, so that closing the stream
referred to by "fh" also closes the underlying file descriptor; get rid
of an unnecessary close of "wth->fd".
svn path=/trunk/; revision=720
gzip. The zLib library is used for this purpose. If zLib is not available
(or it's use is disabled by the --disable-zlib option to configure), you
can still compile Ethereal but it will be unable to read compressed capture
files.
IMPORTANT:
Now all file accesses to capture files should be done through special macros.
Specifically, for any use of the following functions on capture files, replace them.
The arguments for the right-side functions are exactly the same as for the
original stdio functions.
fopen file_open
fdopen filed_open
fread file_read
fwrite file_write
fseek file_seek
fclose file_close
ferror file_error
svn path=/trunk/; revision=695
read, and maintain it ourselves as we read through the file, rather than
calling "ftell()" for every packet we read - "ftell()" may involve an
"lseek()" call, which could add a noticeable CPU overhead when reading a
large file.
svn path=/trunk/; revision=596
Get rid of WTAP_ENCAP_NONE; replace it with WTAP_ENCAP_UNKNOWN, which
means "I can't handle that file, it's using an encapsulation I don't
support".
Check for encapsulations we don't support, and return an error (as is
already done in "libpcap.c").
Check for too-large packet sizes, and return an error (as is already
done in "libpcap.c").
Print unsigned quantities in Wiretap messages with "%u", not "%d".
svn path=/trunk/; revision=544
variable from lanalyzer_t (plus an additional variable which wasn't being
used). While I was in there I cleaned up some comments and renamed a couple
variables to make more sense.
svn path=/trunk/; revision=521
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
but does not link. Perhaps someone who understands the MS tools can help
out. I made it link a few months ago, but with different version of glib/gtk+.
I can't remember how I made it link.
Most of the compatibility issues were resolved with adding
#ifdef HAVE_UNISTD_H the the source code. Please be sure to add this to all
future code.
svn path=/trunk/; revision=359
That requires that, in the packet-reading loop, we pass to the callback
routine the offset in the file of a packet's data, because we can no
longer compute that offset by subtracting the size of the captured
packet data from the offset in the file after the data was read -
"snoop" may stick padding in after the packet data to align packet
headers on 4-byte boundaries.
Doing that required that we arrange that we do that for "libpcap"
capture files as well; the cleanest way to do that was to write our own
code for reading "libpcap" capture files, rather than using the
"libpcap" code to do it.
Make "wtap_dispatch_cb()" and "pcap_dispatch_cb()" static to "file.c",
as they're not used elsewhere.
If we're using wiretap, don't define in "file.h" stuff used only when
we're not using wiretap.
Update the wiretap README to reflect Gilbert's and my recent changes.
Clean up some memory leaks in "wiretap/lanalyzer.c" and
"wiretap/ngsniffer.c", where the capture-file-format-specific data
wasn't freed if the open failed.
svn path=/trunk/; revision=91
wiretap functions to be more generic and therefore allow an easier integration
of more packet-capture file types. I also put in all the GPL copyrights in the
wiretap code.
svn path=/trunk/; revision=83
Guy Harris