Wireshark.nsi requires SMI_DIR to point to the base of the SMI directory
but FindSMI.cmake doesn't set it. Set it in the main CMakeLists.txt
Change-Id: Id667341273d6abb0d2d64ef91cc62d1ce3f42a83
Reviewed-on: https://code.wireshark.org/review/9499
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Change-Id: I0edc3909516452e6497a050b4617f9aafcea2688
Reviewed-on: https://code.wireshark.org/review/9112
Reviewed-by: Michael Mann <mmann78@netscape.net>
A few sample tap/dissectors (ANSI/A, ANSI MAP) are also included to test the API. The "GUI output" is a bit raw and could use some "prettying up", but all the basic hooks are there.
Telephony "stat grouping" needs to be better alphabetized to properly populate menu (on GTK, probably Qt)
Change-Id: I98514171f69c4ab3a304dccb26c71d629703c9ab
Reviewed-on: https://code.wireshark.org/review/9110
Reviewed-by: Michael Mann <mmann78@netscape.net>
This got missed in the initial refactoring.
Change-Id: I98dcc0816e065efab9b497f753c8d2d388349ff3
Reviewed-on: https://code.wireshark.org/review/9044
Reviewed-by: Michael Mann <mmann78@netscape.net>
Very similar to the refactoring of SRT stats, it provides more commonality of the stats for all GUI interfaces. Currently implemented for TShark and GTK. Affected dissectors: MEGACO, MGCP, Radius
Change-Id: Icb73a7e603dc3502b39bf696227fcaae37d4ed21
Reviewed-on: https://code.wireshark.org/review/8998
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Create "common" SRT tap data collection intended for all GUIs. Refactor/merge functionality of existing dissectors that have SRT support (AFP, DCERPC, Diameter, FC, GTP, LDAP, NCP, RPC, SCIS, SMB, and SMB2) for both TShark and GTK.
SMB and DCERPC "tap packet filtering" were different between TShark and GTK, so I went with GTK filter logic.
CAMEL "tap packet filtering" was different between TShark and GTK, so GTK filtering logic was pushed to the dissector and the TShark tap was left alone.
Change-Id: I7d6eaad0673fe628ef337f9165d7ed94f4a5e1cc
Reviewed-on: https://code.wireshark.org/review/8894
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Set the CMake policy for CMP0042 to old
Change-Id: I2b71e1d8d9b9b90ede11df1a7874a2360c3032c5
Reviewed-on: https://code.wireshark.org/review/8740
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for the locally modified version of zlib to suppress
a CMake warning and disable building of the zlib examples.
Change-Id: I9ae08b49d149951e8626d506f69f1757a1ec7e23
Reviewed-on: https://code.wireshark.org/review/8706
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Rename a local CMake variable to prevent CMP0054 warnings in
CheckTypeSize and CheckStructHasMember modules.
Change-Id: Ida0df954c81333ad37455db90e0d72ca9df8c6f1
Reviewed-on: https://code.wireshark.org/review/8522
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Make the gitversion target depend on version.h instead of running
make-version.pl separately. Make wsutil and qtui depend on gitversion.
Change-Id: I32f25347c12c7f86b2439ed4bf517cc8f5fb106f
Reviewed-on: https://code.wireshark.org/review/8299
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: Iab2559c2bac5550987c108c6e917506fcec525e9
Reviewed-on: https://code.wireshark.org/review/8221
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
An undefined or invalid PROCESSOR_ARCHITECTURE will produce an invalid
wireshark.exe.manifest. Make sure it's always set.
Change-Id: I1b33f7bd5e964f05344919d1f11d88c14104c0ce
Reviewed-on: https://code.wireshark.org/review/8253
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Allow the wireshark libs directory to be defined by WIRESHARK_LIB_DIR.
Ensure either WIRESHARK_LIB_DIR or WIRESHARK_BASE_DIR is defined.
Ensure the compiler is a supported version (VS2010, 12 or 13).
Change-Id: I0abd371c5773c08ca255abe308d1a59e2e290a02
Reviewed-on: https://code.wireshark.org/review/8247
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Set the minimum version for Windows to 3.1.3
Set the policy for CMP0054 to squelch a few warnings.
Change-Id: I7647a0e5dce83db2cd87d7b8048c808e10863c7e
Reviewed-on: https://code.wireshark.org/review/8241
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
This is a "refactoring part 1" of the srt stats. This first step is using the service_response_time_table for all (possible) TShark srt stats. Next step will be combining the GTK and TShark service_response_time_table, so there is more code reuse and the "shared structure names" between GTK and TShark service_response_time_table won't seem as bad.
Maybe it can even go one step farther and handle a dynamic number of columns so this refactoring can apply to all srt stats.
Change-Id: Ief28e7e55f7dbbf4f2d9bb6f1a1592b87b866137
Reviewed-on: https://code.wireshark.org/review/8210
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I66247132f00c83f35cf78cb63ea00a5ce923fddb
Reviewed-on: https://code.wireshark.org/review/8211
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 9363
Change-Id: Ic64716ef0156607ca40773cef8e76fc4a0825b3c
Reviewed-on: https://code.wireshark.org/review/8196
Reviewed-by: Michael Mann <mmann78@netscape.net>
Standardise the args to win-setup.ps1
Change-Id: Ibd9d7bb338edb1cef444abc37a7b103eec38fb09
Reviewed-on: https://code.wireshark.org/review/8173
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Changed path from "share" to one based on plugns path
For example /usr/local/lib/wireshark/extcap
Change-Id: I8f4a9f274b1cec897ed45de9e05679ac3f230301
Reviewed-on: https://code.wireshark.org/review/8161
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Tested-by: Balint Reczey <balint@balintreczey.hu>
Fix up generation messages for Windows build
Remove some superfluous Lua messages
Change-Id: I405e7edfcb043fc842fe4f0cca8d23d5755527f9
Reviewed-on: https://code.wireshark.org/review/8138
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Make sure the target location for extcap executables and extcap_dir
match on OS X.
Set the extcap directory to Contents/MacOS/extcap. The Mac Developer
Library documentation doesn't explicitly define "Resources", but
examples include data files and not executables. It does state that
executables shouldn't go into PlugIns.
Make sure we rpathify androiddump.
Change-Id: If36c762e2a1991c26e5c01a870deaf191bcf9f94
Reviewed-on: https://code.wireshark.org/review/8093
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Newer versions of CMake generate warnings about the use of
@variable@ references, replace @CPACK_PACKAGE_NAME@ with
${CPACK_PACKAGE_NAME}
Set the policy for CMP0026 to be old to squelch warnings about the
use of target LOCATION
Change-Id: I424083260c51875dde80f98a23d6528c31ff0aec
Reviewed-on: https://code.wireshark.org/review/7977
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
androiddump should be put in extcat directory.
Change-Id: I360eef2d5a68178c73181949b0fe3346585f5190
Reviewed-on: https://code.wireshark.org/review/8083
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Try not to overwrite gspawn*.exe between signing them and packaging
them. (Second try.)
Change-Id: I717f5fca6dc6afbc146927d06e6f74ae6a0a87c8
Reviewed-on: https://code.wireshark.org/review/8082
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This accidentally reverted code from g40ce324. Will try again shortly.
This reverts commit 8d9fdda991.
Change-Id: I0bf7f351b926f1ce4b0c9e19fe0367add1dfee1e
Reviewed-on: https://code.wireshark.org/review/8081
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Try not to overwrite gspawn*.exe between signing them and packaging them.
Change-Id: I9f224b64537c3b0dd6f7f8b94a8837bd427ad2ca
Reviewed-on: https://code.wireshark.org/review/8080
Reviewed-by: Gerald Combs <gerald@wireshark.org>
On Windows, prepend the main program directory to %Path% when spawning
extcap processes. This lets us place androiddump in extcap while allowing
it to locate its DLLs.
Change-Id: I406c47ce71323266d5f14fb596931398464e452d
Reviewed-on: https://code.wireshark.org/review/8057
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add win-setup.ps1, which duplicates the following tasks performed by
config.nmake + Makefile.nmake + win-setup.sh:
- Create the windows library directory.
- Download files.
- Download and unpack zip files.
- Check and set current-tag.txt
Don't verify applications or libraries. CMakeLists.txt does that.
Update the Developer's Guide.
Have POWERSHELL_COMMAND use dot sourcing instead of "-File", which
appears to be a synonym for "-IgnoreTheExitStatusReturnedByThisScript".
This removes our dependencies on unzip and wget and reduces our dependency
on bash.
Change-Id: Ia9def24acbe183d81b9d477fa42e655e4a3a6614
Reviewed-on: https://code.wireshark.org/review/7990
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The Visual Studio solution files created by CMake list "Debug" as the
first configuration, which means that we end up with zlibd1.dll by
default. Many of the OpenSUSE DLLs depend on zlib1.dll. Add the OBS
version in that case.
Change-Id: Ia98490f1a192802d1482e0749bbd2b550e916bc5
Reviewed-on: https://code.wireshark.org/review/8051
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add missing androiddump stuff like:
- release notes
- documentation
- Windows nmake support
- running androiddump as a windows application instead of console on Windows
- addition of androiddump to the Windows installer
Change-Id: I3bc6cc70e4dc96c0cd776f3d965dd2aa0309995d
Reviewed-on: https://code.wireshark.org/review/7981
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
If we're building on Windows and %Platform% is "x64" or undefined,
check it against our generator's target platform.
Update the "${CMAKE_GENERATOR} MATCHES" regexes to match what CMake
uses internally.
Change-Id: I33996344978855cbdf7c1ee9e55b7340efea5b5c
Reviewed-on: https://code.wireshark.org/review/7994
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
The change to zlib 1.28 requires the variable BUILD_SHARED_LIBS
to be set and true to build the correct zlib dll on Windows.
Change-Id: I0f46b832726834a4e99d7d7d0637112da9c0c531
Reviewed-on: https://code.wireshark.org/review/7982
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
androiddump is extcap program that can be used with Android devices
(need Android SDK in system PATH). Supported is Logcat/Logger logs and
Bluetooth interfaces for all Android to this day (Lollipop).
Please note that it will work also for FirefoxOS.
Interfaces:
1. Logcat Main (binary or text)
2. Logcat System (binary or text)
3. Logcat Events (binary or text)
4. Logcat Radio (binary or text)
5. Logcat Crash (text; Lollipop)
6. Bluetooth Hcidump (<Kitkat)
7. Bluetooth Bluedroid External Parser (Kitkat)
8. Bluetooth BtsnoopNet (Lollipop)
Change-Id: I26e4cd1a37a6af805f8b932399b4aa44ee7b5a80
Reviewed-on: https://code.wireshark.org/review/7475
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Modify CMake to compile zlib, removing need for an nmake compilation
of zlib before running CMake.
Change-Id: I63cead55b14d6a2e22b1b6a8536eaf9260e21231
Reviewed-on: https://code.wireshark.org/review/7864
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Removed the redundant setpath batch file and associated macro
and updated docs.
Change-Id: I5ddab6bad2d14ed3443194d7269f1890e4aa608e
Reviewed-on: https://code.wireshark.org/review/7826
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Add FOLDER properties to targets to tidy up the VS solution
Change-Id: Ia42e0e89fb490cd3dcd33b7c5f59eb0a27b74c7a
Reviewed-on: https://code.wireshark.org/review/7822
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
A recent commit broke compilation with Python 3. The original author of
html2text.py is deceased and the fork has increased the number of files
for this "simple" helper.
The html2text.py script in this patch was rewritten and its output
matches with lynx (except for a few newlines around lists). This means
that indentation has been added for headings, paragraphs and lists.
Also, since it was written from scratch, a new license could be chosen
that matches Wireshark.
Since now the in-tree html2text.py script provides nicer output, remove
detection of the alternative programs (elinks, links). lynx/w3m is
somehow still necessary for asciidoc though.
(I also looked into reusing html2text.py for the release notes to
replace asciidoc, but the --format=html output produces different output
(HTML adds a ToC and section numbers). For now still require lynx for
release notes)
Tested with Python 2.6.6, 2.7.9, 3.2.6 and 3.4.3 under LC_ALL=C and
LC_ALL=en_US.UTF-8 on Linux. Tested reading from stdin and file, writing
to file, pipe and tty. Tested with cmake (Ninja) and autotools on Arch
Linux x86_64. Test:
# For each $PATH per python version, execute (with varying LC_ALL)
help/faq.py -b | tools/html2text.py /dev/stdin | md5sum
help/faq.py -b | tools/html2text.py | md5sum
help/faq.py -b | tools/html2text.py
help/faq.py -b | tools/html2text.py >/dev/null
Change-Id: I6409450a3e6c8b010ca082251f9db7358b0cc2fd
Reviewed-on: https://code.wireshark.org/review/7779
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a "test-programs" target to each toolchain which builds each unit
test executable. "test-programs" must now be built before running
the unit test suite.
Change-Id: I9317a1e305d987f244c4bd8b4a7f05d11fed7090
Reviewed-on: https://code.wireshark.org/review/7673
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add packaging/nsis/CMakeLists.txt and use it to generate each NSIS include
file. Add macros to generate packaging-related targets and invoke them
from the top-level CMakeLists.txt.
Add a top-level "plugins" target. Copy plugins to "plugins" in each of
our staging directories instead of "plugins/$VERSION".
Add missing files to the copy_data_files and copy_cli_dlls targets.
Add all files in the NSIS package from the staging directory.
Drop a bunch of no-longer-needed defines, e.g. MSVC_VARIANT.
Change-Id: Ib1079260d164c65118050f1431af8e582cd577fa
Reviewed-on: https://code.wireshark.org/review/6459
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Process wslua/CMakeLists.txt using add_subdirectory instead of
include. Generate files in the build directory instead of the source
directory.
Copy lua scripts to DATAFILE_DIR instead of DATAFILE_DIR/lua. That's
where init.lua looks for console.lua.
Always set WIRESHARK_RUN_FROM_BUILD_DIRECTORY when testing. We
presumably want to test our source files and not files which may or
may not be in the system path.
When we're running from the build directory look for lua scripts in both
the Autotools and CMake build locations.
Change-Id: Ic15ab8c58ff1b170d000c9b3e0a329af2ec44b7b
Reviewed-on: https://code.wireshark.org/review/7590
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Create a wrapper script that cd's to the test directory and execs
test.sh. We need to handle build configurations so the path is a bit
roundabout.
Change-Id: I4c2a48c041bce2479422830110b1251b3f2c5a94
Reviewed-on: https://code.wireshark.org/review/7570
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "flavor" (for lack of a better word) banner, which can be set at
build time via WIRESHARK_VERSION_FLAVOR / VERSION_FLAVOR. Set it to
"Development Build" by default. This effectively migrates the
"DEVELOPMENT VERSION" logo image text from the GTK+ UI.
Add full release and automatic update information at the bottom.
Remove the short version from the welcome banner (top left).
To do:
- Add back support for gui_version_placement.
- Move the version and repository branch to the flavor label?
- Add update links as appropriate to the bottom.
- Clean up layout and spacing.
Change-Id: I28af33e6c2beb855f803a2dfedef49f3e8389057
Reviewed-on: https://code.wireshark.org/review/7071
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Squelch warnings due to (char *) casts.
Use "include_directories(SYSTEM..." in CMakeLists.txt so that we
don't get pedantic warnings about things we can't easily fix such
as QList loop optimizations. Not sure if there's an easy way to do
this in Autotools.
Pass get_gui_compiled_info to init_progfile_dir. C++ don't have to
show you any stinkin' ::main.
warning: ISO C++ forbids taking address of function ‘::main’ [-Wpedantic]
Change-Id: If1c77284ab0d1b4786bce4e926a4109dd9b1ae34
Reviewed-on: https://code.wireshark.org/review/7207
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Test the compiler for "-Wpedantic" instead of "-pedantic" since DIAG_OFF
and DIAG_ON expect a "-W" flag prefix. Be more strict about the compiler
versions that DIAG_OFF and DIAG_ON support.
Change-Id: I9304c544912102f1719b79e9250f97b40a324430
Reviewed-on: https://code.wireshark.org/review/7123
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Hopefully Gerald's change will fix this annoyance once and for all.
Change-Id: I547b221a670f1435fa86cb96b084cfa5b788c57f
Reviewed-on: https://code.wireshark.org/review/6971
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Semi-blind attempt to fix what appears to be a race condition on the OS
X x86 buildbot.
Change-Id: I379c7dec26c2bca092d0c9a49465ee56a01d15ec
Reviewed-on: https://code.wireshark.org/review/6969
Reviewed-by: Gerald Combs <gerald@wireshark.org>
It didn't fail with cp, so maybe that's just random luck, or maybe the
built-in copy functions have an issue, or maybe just copy_if_different
has an issue (64-bit inode number issues?). Try just copy, and see what
happens.
Change-Id: I84abf3846af9305c19ad4a78d5c9df31b1e1e61e
Reviewed-on: https://code.wireshark.org/review/6961
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The 32-bit OS X build is failing rather often due to cmake -E
copy_if_different failing to copy wireshark.html, and to call cmake's
copy functions completely crappy at reporting errors is to insult
software that's merely completely crappy at reporting errors. Try using
cp in the hopes that it'll actually tell us *WHY* the copy is failing
and see if we can fix it.
Change-Id: I723150c52c2ec0fe704d54191ef27fb6caf47fba
Reviewed-on: https://code.wireshark.org/review/6960
Reviewed-by: Guy Harris <guy@alum.mit.edu>
As it turns out, building the app bundle makes wireshark-gtk unusable.
Change-Id: Ic3608f0a485c3ec4ea21fbc2e7194553eda8c806
Reviewed-on: https://code.wireshark.org/review/6938
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Run osx-app.sh by default on OS X. Aside from giving us a fully portable
application bundle after building this should let us clear our library
path at startup should the need arise. Change the name of the osx-app
target to app_bundle.
Search ../Frameworks before ../lib. Create PkgInfo at configure time
instead of compile time. Build our program list as we go.
Change-Id: If5511ee921108b1c079cef67026eac9e47211be1
Reviewed-on: https://code.wireshark.org/review/6896
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Create DATAFILE_DIR when we're building an application bundle. Hopefully
this will fix the build error on the OS X x86 builder.
Change-Id: I57414bcd87ab21958ae8131a8cd77951b29e02f7
Reviewed-on: https://code.wireshark.org/review/6763
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Move all the SSE 4.2 stuff to wsutil/CMakeLists.txt.
Don't put ws_mempbrk_sse42.c in WSUTIL_FILES by default; add it if we
think the compiler supports compiling for SSE 4.2.
Add -msse4.2 to its COMPILE_FLAGS, but don't add it to any other
compiler flags - we don't want to build anything else with -msse4.2 by
default, as the only code that uses SSE 4.2 instructions but *only* does
so if the processor supports it is our mempbrk implementation. (And
*add* it, don't *replace* the existing flags with -msse4.2; that way,
-Werror is left in there as well.)
Change-Id: I979b37a37e4b88b3af11e2275e89441118c8ce0a
Reviewed-on: https://code.wireshark.org/review/6698
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When building an application bundle, create wrapper scripts at the top
level instead of symlinking to each executable.
Change-Id: I080e43de545a709b29c1d6b6c6ec416e5a5a8247
Reviewed-on: https://code.wireshark.org/review/6683
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Redefine PLUGIN_DIR similar to DATAFILE_DIR and use it on all
platforms. Add WiresharkPlugin.cmake so that we can start defining common
macros for plugins/*/CMakeLists.txt. Load plugins in out-of-tree builds.
Change-Id: I8c1359ed3cf8a71788b8320ff89dfe2d3969def2
Reviewed-on: https://code.wireshark.org/review/6640
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "pdb_zip_package" target similar to the NMake pdb_zip target.
Change-Id: I23d114a63fa05f722ee90b77ea458d9e496e5bf9
Reviewed-on: https://code.wireshark.org/review/6673
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Set DATAFILE_DIR to a value that includes the build configuration. Add a
copy_data_files target that copies AUTHORS-SHORT, the default filters,
and other support files to the run directory. Add FindPowerShell.cmake
and require it on Windows. Remove some OS X BUNDLE_RESOURCE_
declarations which are now covered by copy_data_files.
Change-Id: Iade74946dd5ed2c54239036aa4970f9ffc4681a4
Reviewed-on: https://code.wireshark.org/review/6561
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The windeployqt variable name ends up in the cache. Change it to
QT_WINDEPLOYQT_EXECUTABLE, which follows conventions used in the Qt
CMake modules.
Change-Id: I14998b921009e44e5ca743e2915fe84447b22df0
Reviewed-on: https://code.wireshark.org/review/6549
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The copy-qt-dll custom command should ensure the qt bin dir is on
the path.
Modify the flags passed to windeployqt depending on the configuration.
Change-Id: I12860d415f80cee323c72aa8a4892eaa6126f165
Reviewed-on: https://code.wireshark.org/review/6537
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The flags that are deleted are already supplied by the CMake generator.
Change-Id: Ifafc2343ac0c5d365a39f4a181b23f54c65bce74
Reviewed-on: https://code.wireshark.org/review/6538
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Update the comments and add a URL. Use HINTS, which is more correct
according to the documentation.
Change-Id: I82a7e2790dfa0b398e2b534f9f45851f55bdc0d2
Reviewed-on: https://code.wireshark.org/review/6536
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "copy_qt_dlls" target similar to "copy_cli_dlls". Wireshark.exe
must exist before windeployqt can be run, so we can't create a PRE_BUILD
target. Add copy_qt_dlls to the default target instead.
Change-Id: If85d89478472b10b31229413465955fe98b0ef02
Reviewed-on: https://code.wireshark.org/review/6529
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "copy_cli_dlls" target which copies the DLLs required to run our
command line programs to the run directory.
Fix the spelling of "KERBEROS". Start filling in variables so that we
can populate config.nsh.
Change-Id: I9b3ed912dfbffecbf09f2893efa2c9d82e709521
Reviewed-on: https://code.wireshark.org/review/6513
Reviewed-by: Gerald Combs <gerald@wireshark.org>
CMake now generates local copies of .rc files for all the Windows
components and uses the files in the build of the components.
The .rc.in files that include an icon were modified to allow the icon
path to be set by CMake. The path is removed for nmake builds.
Updated build architecture detection, required for wireshark.manifest.in
Change-Id: I7b1ff43050e9b0efb861d1041636fb4aef49a4f8
Reviewed-on: https://code.wireshark.org/review/6482
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
This gives a more structured layout in Visual Studio
Change-Id: I0da87a3e5ec759c69aeee031366cf287485cdac2
Reviewed-on: https://code.wireshark.org/review/6485
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Graham Bloice <graham.bloice@trihedral.com>
Set the version variables in CMakeLists.txt directly from
make-version.pl instead of pulling them from configure.ac.
Use the correct default value for VERSION_EXTRA in config.nmake.
wireshark-common.files was removed in g97e1491. We don't need to update
it any more.
Change-Id: I751b6df9ac16e19090712aa79a68e308397c1d25
Reviewed-on: https://code.wireshark.org/review/6483
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Set WIRESHARK_TARGET_PLATFORM near the top of CMakeLists.txt. It's used
by a couple of our modules and will be used for NSIS packaging.
Change-Id: Ief43733bdf162998cd54ff3732f94c8baa3d1e11
Reviewed-on: https://code.wireshark.org/review/6458
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a wrapper script and CMake macros which lets us run Cygwin's a2x
from Windows. Add *another* wrapper script that ignores the return value
of hhc.exe.
Move the ASCIIDOC2DOCBOOK macro to FindASCIIDOC.cmake. Add FindHHC.cmake.
Add hints to FindFOP.cmake.
Use unique file names in the HTML Help chain in an attempt to avoid a
race condition.
To do:
- Fix curly quote in HHC title.
Change-Id: I9b154b7fbd02703656e2ab380199ec0a6db4e36d
Reviewed-on: https://code.wireshark.org/review/6379
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Currently Visual Studio-only. Enabling it adds /analyze:WX- to
LOCAL_CFLAGS, similar to config.nmake.
Change-Id: Ida68831e85f5f04b9f84faa95a39fed24e5f490d
Reviewed-on: https://code.wireshark.org/review/6346
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Before this patch it was not possible to override e.g. the optimization
or debug flags in case the build type was set.
Change-Id: I53bfddd27f87ad5482227f786af8c4728c5774fc
Reviewed-on: https://code.wireshark.org/review/6327
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
If a file in the same directory as config.h, e.g. wireshark-qt.cpp
has a #include "config.h", or another header it includes also has
a #include "config.h", then an out-of-tree build, e.g. CMake will
pick up any in-tree config.h and odd things may happen. The correct
form is #include <config.h> which will pick up the out-of-tree
version.
To find this, introduce a deliberate error and then make an out-of-tree
build, noting where it fails and fix that file. If that file includes
other files that still cause the build to fail, set the compiler
to emit the pre-processed version so you can locate the include with
the next errant "config.h". Repeat ad nauseum.
Possibly all includes of "config.h" should be changed to <config.h>
Revert "CMake: Clobber the top-level config.h before we build."
This reverts commit 1f3849ce61.
Ping-Bug: 10301
Change-Id: Ie567e7cc696fd48f3e730fc27032c5d2a7d8f341
Reviewed-on: https://code.wireshark.org/review/6285
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
If you use the same source directory for in-tree Autotools or Nmake
builds and out-of-tree CMake builds you can end up with a conflicting
config.h a the top of your source tree. Try to remove it in CMake before
building our config.h
Ping-Bug: 10301
Change-Id: I7ebeb31c92022fd28cbfca05fdb6931ffa2d9cae
Reviewed-on: https://code.wireshark.org/review/6282
Reviewed-by: Gerald Combs <gerald@wireshark.org>
"stat name" has been official changed to "endpoints" for all dissectors, rather than a mixture of "host"/"endpoints" based on dissector.
Change-Id: If34bcb5165b493948e784ba038ab202803a59843
Reviewed-on: https://code.wireshark.org/review/6154
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It's not a GTK+ Wireshark source file, so don't include it in
wireshark-gtk.
Change-Id: I0affa1fab1a29e10e1cf446e49182c9c4f218b87
Reviewed-on: https://code.wireshark.org/review/6203
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Added /Zo flag for VS2013 builds to add more debugging info
Removed obsolete comment on unused /GS flag and obsolete
/FR flag.
Removed '#ifdef WIRESHARK_GENERATE_BSC_FILE' and related
(which specified the obsolete /FR flag).
Added /RELEASE flag to linker to set checksum in PE header
Fixed an old typo.
CMake added /INCREMENTAL:NO flag to linker to overide default
and prevent warning messages.
Change-Id: I039b884657d2886acc273dc6dd099d07a7b8ec7d
Reviewed-on: https://code.wireshark.org/review/6110
Reviewed-by: Bill Meier <wmeier@newsguy.com>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This reuses existing functionality and thereby making FindAsn2Wrs.cmake obsolete, resulting in a reduction of the cmake module maintaince load
Change-Id: Ic6ae53e65236246c0cbe86f8c2f066a2d034e0b9
Reviewed-on: https://code.wireshark.org/review/5805
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add make-dissector-reg.py to the Debian packages.
Making it possible to generate out-of-source wireshark plugins.
Change-Id: I0bbe5b46205d39e229d31812341540b26a7336d6
Reviewed-on: https://code.wireshark.org/review/5802
Reviewed-by: Anders Broman <a.broman58@gmail.com>
GLib is always/mostly required when building wireshark plugins. These cmake fiels help finding the install glib components
Change-Id: Ie59b50bf8c53c367d4bf89f53db5ae31e97e0575
Reviewed-on: https://code.wireshark.org/review/5252
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
These files make it possible to use the cmake command find_package(Wirehark) to obtain information about the wireshark installation.
Change-Id: I5af7c4e7b53b99cd473e04905a92bac267cd9b83
Reviewed-on: https://code.wireshark.org/review/5235
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add convenience targets for generating the release notes and the NEWS
file. Make sure we don't run multiple instances of a2x + AsciiDoc at the
same time.
Add the docbook directory to the build by default unless we're running
Windows. Explain why we don't yet build docs on Windows. Make each
docbook makefile target optional.
Split the ENABLE_GUIDES option into ENABLE_HTML_GUIDES and
ENABLE_PDF_GUIDES. Add a default "all_guides" target if either is on.
Remove the Debian patch that hacked around the PDF requirement.
Copy ws.css to the docbook build directory. Don't build PDF release
notes. I'm not sure we ever used them and I don't want to install Java
and FOP just to make a release.
Change-Id: Ia2f710000c17f9e0b4b514fd373d9a5902889553
Reviewed-on: https://code.wireshark.org/review/5712
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add Telephony menu items for VoIP Calls and SIP Flows. Put VoIP Calls at
the top, since that seems to be the primary item.
Add configure-time checks for QtMultimediaWidgets in anticipation of
adding a VoIP playback dialog.
Add an icon for the playback button. (Yes, I've been avoiding
GNOME-level gratuitous icons so far but this is one of the rare
occiasions where it makes sense.)
Add a help link define for the VoIP calls dialog.
Change-Id: I5d0799685c598ad9af76fe9667f8ea7d14b66050
Reviewed-on: https://code.wireshark.org/review/5674
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
When building both LEX (flex) and YACC (bison or yacc) are required to generate C files from l(ex) and y(acc) files
Change-Id: I8892a05eb437d0bef613b68f681225df2cb2c6b4
Reviewed-on: https://code.wireshark.org/review/5515
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
test doesn't actually pass the flags to the VS linker.
Change-Id: I5d546afcb80a49e39143078bc8f0855b0ba0f7e8
Reviewed-on: https://code.wireshark.org/review/5384
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
CFPropertyListCreateFromStream() has been deprecated in Yosemite, in favor of CFPropertyListCreateWithStream(). The autotools
build checks for the existence of the new function, but the cmake build does not. So, add a check for it to CMakeLists.txt, and
update cmakeconfig.h.in to provide the "template" for HAVE_CFPROPERTYLISTCREATEWITHSTREAM.
Change-Id: I1a4e3e1ce83092ecf7725527b921eeca80b18d4b
Note: CFPropertyListCreateWithStream() works under Mavericks as well.
Reviewed-on: https://code.wireshark.org/review/5226
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Stig Bjørlykke <stig@bjorlykke.org>
in not found plugins (lib/wireshark/plugins/1.99.1).
Change-Id: Ie81f3c4450789ff7e37c99e197b44e7df47d8df5
Reviewed-on: https://code.wireshark.org/review/5149
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Add a -cb/--create-bundle option to osx-app.sh which builds the
application bundle. Use it in Autotools. (CMake does this by default.)
Copy over linker flags from configure.ac to CMakeLists.txt to support
rpathification and code signing.
Add an osx-app custom target to CMake.
Change-Id: I6c20a1c27f8954aaea62904b7425b9312d994803
Reviewed-on: https://code.wireshark.org/review/4918
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Work around a CMake bug using file globbing.
Change-Id: I67dc8268154e05834e5d4e7d8f22c6eb25b24c1f
Reviewed-on: https://code.wireshark.org/review/4595
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add an ENABLE_APPLICATION_BUNDLE option which is enabled by default on
OS X and disabled elsewhere. The bundle is currently bare-bones and only
contains the main executables, Info.plist, and application icon.
Capitalize the main application name when ENABLE_APPLICATION_BUNDLE is
set and on Windows.
Start updating CPackConfig.txt for OS X packaging.
To do:
- Add supporting libraries and frameworks.
- Make the bundle standalone. I.e. call FIXUP_BUNDLE or
replicate the relevant parts of osx-app.sh
Change-Id: I4e25abd3b8cbe121ec8615b98706a15c58812cdb
Reviewed-on: https://code.wireshark.org/review/4577
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Use "copy /B" on Windows to create wireshark.pod, similar to
doc/Makefile.nmake.
Change-Id: I454afca0bd3497cca795ca18256dd7c4e2f224d4
Reviewed-on: https://code.wireshark.org/review/4415
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
If it is used, there is a modified file in git.
Fix this by only including the file if it exists.
Other changes:
- Rename the existing Custom files to CMakeListsCustom.txt.example.
- Move the plugins custom file to the top level (same level as its
including parent).
- Optionally allow a list of custom includes instead of the default one.
Change-Id: I8960eac6222f741c045055d43d1d5a2d4979caf6
Reviewed-on: https://code.wireshark.org/review/4163
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Move the map creation code from ui/gtk/hostlist_table.c to
ui/traffic_table_ui.c.
Add CMake commands to copy ipmap.html to the run directory so that
WIRESHARK_RUN_FROM_BUILD_DIRECTORY works for the endpoint map. Not sure
if they're entirely correct but they appear to work.
Add boundary checkes to geoip_db_lookup_ipv[46].
To do:
- It looks like there are prettier maps and newer APIs that we
might want to use.
Change-Id: Ie06992c9bc9c9aa683328aecab3f5f69c9cab966
Reviewed-on: https://code.wireshark.org/review/4011
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make sure the Qt UI is named "Wireshark" and its executable is named
"wireshark" or "wireshark.exe". Make sure the GTK+ UI is named
"Wireshark 1" or "Wireshark (GTK+)" depending on how much the target
audience is likely to care about UI toolkits. Make sure the GTK+
executable is named "wireshark-gtk" or "wireshark-gtk.exe".
It looks like moving to Qt 5.3 (g978faf3) broke the PortableApps
package. It's likely even more broken now.
Autotools out-of-tree builds also broke on Ubuntu 12.02 (automake
1.11.3) at some point. The first attempt to compile in ui/qt returns
"error: source_file.cpp: No such file or directory". The second attempt
works. Out-of-tree builds work fine on Ubuntu 14.04 (automake 1.14.1).
Tested:
- Nmake builds
- NSIS packaging
- CMake builds (Windows, OS X)
- Autotools build and distcheck
- RPM packaging
To do:
- Test Debian packaging
- Fix PortableApps
Change-Id: I66429870e05fd2d6fc901942477959ed6164fce2
Reviewed-on: https://code.wireshark.org/review/3919
Reviewed-by: Gerald Combs <gerald@wireshark.org>
other liberaries. Also: After set( variable 0 ) the variable is defined.
Change-Id: Id26a771875b7643c19f173ce77bb29a4059a1bd0
Reviewed-on: https://code.wireshark.org/review/3793
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Extcap is a plugin interface, which allows for the usage
of external capture interfaces via pipes using a predefined
configuration language which results in a graphical gui.
This implementation seeks for a generic implementation,
which results in a seamless integration with the current
system, and does add all external interfaces as simple
interfaces.
Windows Note: Due to limitations with GTK and Windows,
a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe
is needed, which is part of any GTK windows installation.
The default installation directory from the build is an extcap
subdirectory underneath the run directory. The folder used by
extcap may be viewed in the folders tab of the about dialog.
The default installation directory for extcap plugins with
a pre-build or installer version of wireshark is the extcap
subdirectory underneath the main wireshark directory.
For more information see:
http://youtu.be/Nn84T506SwU
bug #9009
Also take a look in doc/extcap_example.py for a Python-example
and in extcap.pod for the arguments grammer.
Todo:
- Integrate with Qt - currently no GUI is generated, but
the interfaces are still usable
Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f
Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net>
Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net>
Signed-off-by: Roland Knall <rknall@gmail.com>
Reviewed-on: https://code.wireshark.org/review/359
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
4189: Local variable is initialized but not referenced
Fix some variables found by this
Change-Id: Icc13def5413f1fe885ec25e659462c8906a6cfa0
Reviewed-on: https://code.wireshark.org/review/3748
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
Add support for the taskbar progress indicator on Windows via
QtWinExtras. It is almost as if we're a grown up Windows application.
Change-Id: I378206b49510d4bd08f2437d8e9a1b01bc6f1351
Reviewed-on: https://code.wireshark.org/review/3576
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We decided at sharkfest that this wasn't the right design for file dissection;
we have more-or-less settled on way forward, but nobody's shown interest in
implementing it. Whether or not that ever happens, this code is effectively
dead and should be removed.
Change-Id: I14d6086df3204fffb6485228db39d9f407661417
Reviewed-on: https://code.wireshark.org/review/3400
Petri-Dish: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
Do, however, do the "for a target of 10.4 or 10.5, build 32-bit only"
stuff, as that's specific to programs that capture traffic, such as
Wireshark (well, I guess we could just limit it to dumpcap, but...).
Change-Id: I5f4d4d57fd126e5c295dedae9ed13b263035a911
Reviewed-on: https://code.wireshark.org/review/3403
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It should be set to an OS version, such as "10.5" or "10.6" or..., and,
if set (and if you're building for "APPLE"), it'll try to find the SDK
(and fail if it's not found), and add appropriate -isysroot,
-mmacosx-version-min, and, if appropriate, -m32 compiler options.
(It will need more work once we support building OS X app bundles and
installers; pick up more stuff from configure.ac for that.)
Change-Id: I0aebf2db8aa39304a41be4e2a9879dea6f308ec7
Reviewed-on: https://code.wireshark.org/review/3388
Reviewed-by: Guy Harris <guy@alum.mit.edu>
(The difference in question turned out to be that optimization wasn't
turned on for autotools builds but was turned on for CMake builds.
Comparing the compiler options also found some other differences that
should be cleaned up.)
Change-Id: I2edb28dedc47fe10b3f68f25d3e302430b27bf46
Reviewed-on: https://code.wireshark.org/review/3386
Reviewed-by: Guy Harris <guy@alum.mit.edu>
On the 32-bit OS X buildbot, automake is old enough that autotools
builds are verbose, printing the command line for each compile step; if
we cause CMake to produce verbose makefiles, they will also print the
command line, so we can see what differences there are.
This means the other debugging output we added isn't necessary; remove
it.
Sort the extra warning options in configure.ac based on whether they're
for C and C++ or just C, just as is the case in CMake, to make it easier
to keep the lists in sync; add comments to configure.ac to mirror the
ones in CMakeLists.txt.
Get rid of -Wno-deprecated-declarations; the CMake build doesn't use it,
and it doesn't appear to be necessary - if we ever have problems with OS
X complaining about using OpenSSL, for example, we should do as tcpdump
does and wrap uses of the "deprecated"-but-cross-platform APIs in
the appropriate pragmas.
Change-Id: I0b8b45f00481ac2b67da5c7dd028a029b130dcc4
Reviewed-on: https://code.wireshark.org/review/3377
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Hopefully this will help figure out whether we're using different
compilers for the autotools and CMake builds.
Change-Id: If6d2ee93cd14570c53723140dcedf347600cbe34
Reviewed-on: https://code.wireshark.org/review/3375
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also, comment out the addition of -Wno-deprecated-declarations, as the
CMake build doesn't use it.
If this succeeds in making the autotools and CMake builds compile C code
with the same -W and -f flags in the same order, that should eliminate
at least one reason why the CMake build produces compiler warnings that
the autotools build doesn't.
Change-Id: I0eaeae91b8e3c39c53f502daef86c2d103c8bdab
Reviewed-on: https://code.wireshark.org/review/3374
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Now that we check each flag with all previously-accepted flags, this
catches the case where -fwrapv causes -fno-strict-overflow to produce a
warning when tested.
This way, what we do matches what the autotools do.
Change-Id: I68ce281dc33a32b591e3137db626f2749c4a0708
Reviewed-on: https://code.wireshark.org/review/3370
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That mirrors what we're doing with autotools, and catches cases where
an earlier-tested flag affects the results for a later-tested flag
(e.g., -fwrapv can affect whether -fno-strict-overflow produces a
warning when tested).
Change-Id: I8ca0b6f5dee14d2394af9b6b8b93b9dbda2702d7
Reviewed-on: https://code.wireshark.org/review/3369
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For autotools, dump CC, CFLAGS, CXX, and CXXFLAGS.
For CMake, dump CMAKE_C_COMPILER_ID and CMAKE_CXX_COMPILER_ID.
Hopefully this will help figure out why CMake builds catch different
warnings from autotools builds.
Change-Id: I26955ad955f60e8bad248562fa87963a3a1bb42f
Reviewed-on: https://code.wireshark.org/review/3365
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way, we report the *full* contents of those flags.
Change-Id: Idab78049247c04b7d35a3ce804c8ea9daaf84312
Reviewed-on: https://code.wireshark.org/review/3364
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Only the former should be run through checkAPI.pl; Windows .rc files,
for example, shouldn't.
Change-Id: I948705b4020b413834c37a0d685eedcb747aa237
Reviewed-on: https://code.wireshark.org/review/3303
Reviewed-by: Guy Harris <guy@alum.mit.edu>
for the other build systems as well.
Small whitespace fix.
Change-Id: I071ee4ae0fa85306435d2d82d36265973181b71c
Reviewed-on: https://code.wireshark.org/review/3263
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Some of those routines are used only in dumpcap; others are used in
TShark and Wireshark as well.
Change-Id: I9d92483f2fcff57a7d8b6bf6bdf2870505d19fb7
Reviewed-on: https://code.wireshark.org/review/2841
Reviewed-by: Guy Harris <guy@alum.mit.edu>
wsutil contains the only code that uses version.h; make the dependency
explicit, to see whether that fixes the current build issues with Debian
packaging.
Also, get rid of all *other* dependencies on gitversion.
Change-Id: I89fa5e4112633b83a1a7dfa349bc337e3688575f
Reviewed-on: https://code.wireshark.org/review/2823
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make the output for them resemble the output for other programs.
Change-Id: I45dbee32ad403b8fedc2350ac9096ac1a5820cbe
Reviewed-on: https://code.wireshark.org/review/2799
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have --version print the version number, the copyright information, the
"compiled with" information, the "running on/with" information, and the
compiler information.
Have --help print the version number, a one-line summary of what the
program does, a reference to http://www.wireshark.org for more
information, a Usage: line, and a list of command-line options.
This means programs doing that don't need to include version.h; that's
left up to get_ws_vcs_version_info() to do.
Change-Id: Idac641bc10e4dfd04c9914d379b3a3e0cc5ca8cb
Reviewed-on: https://code.wireshark.org/review/2794
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Append user's flags to our flags instead of prepending them to make
user flags higher priority.
Change-Id: I3ead33ee5fa06a2395d9197a027306ef99a704a2
Reviewed-on: https://code.wireshark.org/review/2722
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
(It's not being built by the Ubuntu buildboth when it's building the
Debian package.)
Change-Id: Id7866e13ce72cdda4bb7d5cf0362ba7295ff766b
Reviewed-on: https://code.wireshark.org/review/2772
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make the dependencies list indicate that.
Change-Id: I88416e1239130b7661bbd9deccfb289e0b0fd627
Reviewed-on: https://code.wireshark.org/review/2770
Reviewed-by: Guy Harris <guy@alum.mit.edu>
build could fail in wsutil because of missing version.h
Change-Id: If6fdf1080c6de9ca1581bcc126506e78ec03a1d8
Reviewed-on: https://code.wireshark.org/review/2740
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Move the routines to parse numerical command-line arguments there.
Make cmdarg_err() and cmdarg_err_cont() routines in wsutil that just
call routines specified by a call to cmdarg_err_init(), and have
programs supply the appropriate routines to it.
Change-Id: Ic24fc758c0e647f4ff49eb91673529bcb9587b01
Reviewed-on: https://code.wireshark.org/review/2704
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This pulls some stuff out of the top-level directory, and means we don't
have to build them once for every program using them.
Change-Id: I37b31fed20f2d5c3563ecd2bae9fd86af70afff5
Reviewed-on: https://code.wireshark.org/review/2591
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This mean we also have to move CFString_to_C_string() there for OS X.
Change-Id: Ic91ad872e9d5290cf34f842503ededd5452e4337
Reviewed-on: https://code.wireshark.org/review/2511
Reviewed-by: Guy Harris <guy@alum.mit.edu>
- We don't expect to find all packages and it is normally OK for
some to fail.
Change-Id: I46c5edbf8ea3635fd703b222d4a9beb5ebb4745a
Reviewed-on: https://code.wireshark.org/review/2406
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
We don't care about instruction set extensions other than SSE 4.2, just
check for that.
Do so on all compilers other than MSVC.
Change-Id: I227c31715aab6df0e020d6bc3e3aa41e1bc5cb7e
Reviewed-on: https://code.wireshark.org/review/2405
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
check_c_compiler_flag now checks for the message Clang prints for -f and
-m flags it doesn't handle ("argument unused during compilation:
'-{flag}'"), so the checks for it now should fail properly during
testing, causing us not to use the flag in question. This means we
don't need to suppress that warning, as we shouldn't be getting it.
Change-Id: Ieb9657f9e2cee2f357acd52725199d78d2dad80f
Reviewed-on: https://code.wireshark.org/review/2401
Reviewed-by: Guy Harris <guy@alum.mit.edu>
check_c_compiler_flag checks for the message Clang prints for an unknown
warning option ("unknown warning option '-WXXX'"), and fails if it's
produced, so we don't need to force the compiler to fail by passing it
-Werror=unknown-warning-option.
(Yes, the CMake way of handling those annoying options is different from
the way we do that in autotools - autotools adds flags to force errors,
CMake checks for the warning messages - but that's OK.)
Change-Id: I5c2e5d6f4826eba7048736d5134d20417778276a
Reviewed-on: https://code.wireshark.org/review/2400
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It looks weird to have "-- " before C-Flags but not CXX-Flags.
Change-Id: I95f309b60a45cbd4477c8ed6187b198ab9bac9d8
Reviewed-on: https://code.wireshark.org/review/2398
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Set CMP0015 to NEW
Change-Id: Idea76f365f27e59eb6f56c7edec6d96224668c0d
Reviewed-on: https://code.wireshark.org/review/2219
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
commit 561460160a
Author: Graham Bloice <graham.bloice@trihedral.com>
Date: Fri May 16 20:43:17 2014 +0100
Update CMake build for win32 to build QT again, and to find
GLib and GThread libs
Fix that (basically it put them into the packagelist which got
*replaced* by the next set of things to test).
Change-Id: I0f43a17a7c7eb087c530f6336dc61f93b121fda8
Reviewed-on: https://code.wireshark.org/review/2035
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
It is helpful to find and build this optional dependance.
Change-Id: I73d7a7bb730778bc8b9a54d6560f7f42f1e23bc0
Reviewed-on: https://code.wireshark.org/review/1876
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
cmake version to be 2.8.3. Make this explicit.
commit 5ff629ec5a
Author: Alexis La Goutte <alexis.lagoutte@gmail.com>
Date: Thu May 22 22:05:08 2014 +0200
CMake: Remove FeatureSummary.cmake and fix display of feature
Change-Id: If6f67c837f1bee92a22bbff8965baa3cc71bf663
Reviewed-on: https://code.wireshark.org/review/1841
Reviewed-by: Jörg Mayer <jmayer@loplof.de>