addresses and the protocol type, as supplied by BPF; on Linux, they *do*
have an offset field, as supplied by PF_PACKET sockets. Add a new
WTAP_ENCAP_ARCNET_LINUX, with packets that include the offset field, and
don't dissect an offset in WTAP_ENCAP_ARCNET packets.
Map a libpcap link-layer type of 129 to WTAP_ENCAP_ARCNET_LINUX; that
value was recently assigned to Linux-style ARCNET.
Add some more ARCNET protocol IDs.
For most protocol IDs, dissect an ATA 878.2 fragmentation header; don't
do it for RFC 1051 IP and ARP, and Diagnose packets. Set the length of
the ARCNET protocol tree item appropriately.
Dissect both the RFC 1051 and RFC 1201 styles of IP and ARP over ARCNET,
and dissect the RFC 1201 style of RARP as well.
svn path=/trunk/; revision=6981
that flag in the ATM pseudo-header, and use it to determine whether a
frame is a raw cell or a reassembled frame, rather than using the AAL,
as you can have raw AAL5 cells in a capture.
svn path=/trunk/; revision=6889
used for the DOS-based ATM Sniffer. (That's not a great name, but I
couldn't think of a better one.)
Add a new WTAP_ENCAP_ATM_PDUS_UNTRUNCATED encapsulation type for capture
files where reassembled frames don't have trailers, such as the AAL5
trailer, chopped off. That's what at least some versions of the
Windows-based ATM Sniffer appear to have.
Map the ATM capture file type for NetXRay captures to
WTAP_ENCAP_ATM_PDUS_UNTRUNCATED, and put in stuff to fill in what we've
reverse-engineered, so far, for the pseudo-header; there's more that
needs to be done on it, e.g. getting the channel, AAL type, and traffic
type (or inferring them if they're not in the packet header).
svn path=/trunk/; revision=6840
well as Cisco HDLC support. It compiles OK, but I do not claim that it is
not borken.
I will have to add a small dissector that eats the first two bytes and then
calls the Ethernet dissector as well, to complete the work.
svn path=/trunk/; revision=6809
Surveyor capture, as there's one link-layer type that UNICOS/mp snoop
treats one way and Shomiti Surveyor treats another way. The only way to
check that is to look at the first record to see how much padding it
has.
svn path=/trunk/; revision=6750
header.
Add overflow checks to "BYTES_ARE_IN_FRAME()", and cast all arguments to
unsigned values (negative values should never be passed) to squelch
compiler warnings.
svn path=/trunk/; revision=6567
WTAP_ENCAP_ISDN encapsulation type, which includes a pseudo-header
giving the direction (user-to-network or network-to-user) and the
channel number.
Add a new circuit type, using the ISDN channel number as the circuit ID.
Add an ISDN dissector to put the direction and channel number into the
protocol tree and to call the appropriate dissector for the payload
based on the channel (LAPD for the D channel; V.120, PPP, or data for B
channels, based on some heuristics).
svn path=/trunk/; revision=6521
All files:
- Replace types from sys/types.h by those from glib.h
- Replace ntoh family of macros from netinet/in.h and winsock2.h
by g_ntoh family from glib.h
- Remove now unneeded includes of sys/types.h, netinet/in.h and
winsock2.h
wtap.h
Move includes to the top
svn path=/trunk/; revision=5909
Allow "-" as the output file name in Wiretap, referring to the
standard error.
Optimize the capture loop.
Fix some of the error-message printing code in Ethereal and Tethereal.
Have Wiretap check whether it can seek on a file descriptor, and pass
the results of that test to the file-type-specific "open for output"
routine. Have the "open for output" routines for files where we need to
seek when writing the file return an error if seeks don't work.
svn path=/trunk/; revision=5884
DOCSIS support, including support for "Ethernet" captures where
the raw frame is a DOCSIS frame rather than an Ethernet
frame (some Cisco cable-modem head-end gear can send out a
trace of all traffic on an Ethernet, but what it sends are
the raw bytes of DOCSIS frames, not Ethernet frames)
Get rid of second AUTHORS entry for Devin Heitmueller, merging its item
into the older entry.
Clean up the order of some lists of plugin items.
svn path=/trunk/; revision=5861
<packet32.h> includes <winsock2.h>; we include that rather than
<winsock.h>, to avoid errors due to conflicting declarations in
<winsock.h> and <winsock2.h>.
svn path=/trunk/; revision=5742
Have "wtap_open_offline()", if asked to open a FIFO, return that error
if it was asked to open the file for random access.
svn path=/trunk/; revision=5643
just an image of the ATM Sniffer data. This means that Ethereal doesn't
have to know any ATM Sniffer-specific details (that's all hidden in
Wiretap), and allows us to add to that pseudo-header fields, traffic
types, etc. unknown to ATM Sniffers.
Have Wiretap map VPI 0/VCI 5 to the signalling AAL - for some capture
files, this might not be necessary, as they may mark all signalling
traffic as such, but, on other platforms, we don't know the AAL, so we
assume AAL5 except for 0/5 traffic. Doing it in Wiretap lets us hide
those details from Ethereal (and lets Ethereal interpret 0/5 traffic as
non-signalling traffic, in case that happens to be what it is).
We may know that traffic is LANE, but not whether it's LE Control or
emulated 802.3/802.5; handle that case.
svn path=/trunk/; revision=5302
"struct x25_phdr" to "wiretap/wtap.h".
Have two X.25 dissectors, one of which assumes that there's a "struct
x25_phdr" pseudo-header and one of which doesn't; the former uses the
information in that pseudo-header to determine whether the packet is
DTE->DCE or DCE->DTE, and the latter assumes it has no clue whether the
packet is DTE->DCE or DCE->TDE. Use the former one in the LAPB
dissector, and the latter one in the XOT dissector and in the LLC
dissector table.
In the X.25-over-TCP dissector, handle multiple X.25 packets per TCP
segment, and handle X.25 packets split across TCP segments.
svn path=/trunk/; revision=5134
returns radio information such as signal strength, channel, and data
rate in a pseudo-header. Add that pseudo-header.
Use the "802.11 with radio information" encapsulation type for Wireless
Sniffer files; extract the radio information from where it appears to be
in the header.
Add dissector code for that encapsulation type.
Fix an error in the code to put radio information into the AiroPeek
tree.
Make the "wrapped" flag for NetXRay/Windows Sniffer captures a
"gboolean".
svn path=/trunk/; revision=5122
an "err" argument that points to an "int" into which to put an error
code if it fails.
Check for errors in one call to it, and note that we should do so in
other places.
In the "wtap_seek_read()" call in the TCP graphing code, don't overwrite
"cfile.pseudo_header", and make the buffer into which we read the data
WTAP_MAX_PACKET_SIZE bytes, as it should be.
In some of the file readers for text files, check for errors from the
"parse the record header" and "parse the hex dump" routines when reading
sequentially.
In "csids_seek_read()", fix some calls to "file_error()" to check the
error on the random stream (that being what we're reading).
svn path=/trunk/; revision=4874
that EtherPeek for Windows uses the same format as EtherPeek for MacOS,
so the code isn't specific to the MacOS version.
Check the physMedium value in the secondary header, and leave a
placeholder for a value of 1, which is presumably used in AiroPeek
captures.
Treat unknown mediaType and physMedium values as indications that we
don't have a *Peek file, not as unsupported *Peek files - we need all
the heuristics we can get.
svn path=/trunk/; revision=4601
data structure attached to the "wtap" structure, rather than in a
pseudo-header structure; get rid of the EtherPeek pseudo-header
structure, as it's not actually used as a pseudo-header, it's just used
as private data for the EtherPeek reader.
Get rid of an extra level of indentation in switch statements.
svn path=/trunk/; revision=4561
Nisbet.
Make a comment in "wiretap/file.c" clearer, so people know where to put
the entries for their capture file type.
svn path=/trunk/; revision=4328
files to get that big.
From Thomas Wittwer and Matthias Nyffenegger:
Support for "ring buffer mode", wherein there's a ring buffer of N
capture files; as each capture file reaches its maximum size (the ring
buffer works only with a maximum capture file size specified), Ethereal
rolls over to the next capture file in the ring buffer, replacing
whatever packets might be in it with new packets.
svn path=/trunk/; revision=4323
Rename WTAP_ENCAP_PRISM to WTAP_ENCAP_PRISM_HEADER, to match
DLT_PRISM_HEADER.
Add in missing capture support for WTAP_ENCAP_PRISM_HEADER when
capturing with "pcap_open_live()" rather than reading the capture from a
pipe.
svn path=/trunk/; revision=4299
with one capture I've seen, but perhaps that was done with an old
version of AIX, and newer versions use a minor version number, in the
file, of 4.
However, libpcap hasn't used a minor version of 2 for ages, so perhaps
AIX hasn't updated their libpcap in ages, and aren't about to do so
soon. If they do, let's hope they change the magic number. The capture
file in question *does* have the capture length and real length in the
old, pre-2.3, order, so it really looks as if it's an old version,
rather than IBM trying to be "helpful" by using a different minor
version number so that you can distinguish between normal libpcap and
AIX libpcap formats.)
svn path=/trunk/; revision=4164
Update the lists of known capture file formats in the Tethereal,
editcap, and mergecap man pages to match the current list (as found in
the Ethereal man page).
svn path=/trunk/; revision=4039
get from calling "wtap_file()", so get rid of the call and the
(otherwise unused) variable to which its result gets assigned.
That lets us get rid of "wtap_file()" in Wiretap.
It also lets us get rid of the include of "zlib.h" in "file.h"; the
#defines of "file_open()", "filed_open()", and "file_close()" are also
unnecessary, so we get rid of those as well.
However, that means we need to include <zlib.h> in "gtk/main.c" and
"tethereal.c", so that the version number of libz is defined and can
show up in the version string.
svn path=/trunk/; revision=3652
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133