keys to have _uint in their names, to match the routines that handle
dissector tables with string keys. (Using _port can confuse people into
thinking they're intended solely for use with TCP/UDP/etc. ports when,
in fact, they work better for things such as Ethernet types, where the
binding of particular values to particular protocols are a lot
stronger.)
svn path=/trunk/; revision=35224
The current PRP dissector in packet-prp.c does not correctly identify VLAN
tags. It uses the hard coded value 0x8000 to check the ethertype.
The attached patch (against current SVN trunk) changes this to use the
ETHERTYPE_VLAN define from epan/etypes.h and also fixes two misspellings in the
respective comments.
svn path=/trunk/; revision=34622
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
This is a dissector for the Parallel Redundancy Protocol (PRP) defined in chapter
6 of the IEC 62439.
PRP uses two independent networks in parallel and allows redundancy without
switchovers.
The protocol is sending Mac multicast messages with Ethertype 0x88fb. In
addition to that it adds to every Ethernet frame a 4 byte trailer before
the FCS. The trailer is detected by checking a size field and an identifier
which are part of the trailer. Therefore, if the last 4 bytes of a frame
match a correct trailer they get interpreted as a trailer, although it was
probably not a real one.
Note:
This is a post-dissector which means it gets called for every frame. So as
to not cause a performance hit for every Wireshark user (who may not even be
looking at Ethernet frames) it currently disables itself every time Wireshark
starts up. (There should be a better way to do this--maybe different Profiles
(as discussed on -dev recently) is the way to go.)
From me:
Put ETHERTYPE_PRP (not IANA registered) in etypes.h and packet-ethertype.c
svn path=/trunk/; revision=24493